Change folder name

2023-09-05 11:24:58 +02:00
parent b509e0469d
commit 5c4cca8179
1008 changed files with 131983 additions and 0 deletions
--- a/project/Core/Inc/FreeRTOSConfig.h
+++ b/project/Core/Inc/FreeRTOSConfig.h
@@ -0,0 +1,142 @@
+/* USER CODE BEGIN Header */
+/*
+ * FreeRTOS Kernel V10.2.1
+ * Portion Copyright (C) 2017 Amazon.com, Inc. or its affiliates.  All Rights Reserved.
+ * Portion Copyright (C) 2019 StMicroelectronics, Inc.  All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy of
+ * this software and associated documentation files (the "Software"), to deal in
+ * the Software without restriction, including without limitation the rights to
+ * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
+ * the Software, and to permit persons to whom the Software is furnished to do so,
+ * subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in all
+ * copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
+ * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
+ * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * http://www.FreeRTOS.org
+ * http://aws.amazon.com/freertos
+ *
+ * 1 tab == 4 spaces!
+ */
+/* USER CODE END Header */
+
+#ifndef FREERTOS_CONFIG_H
+#define FREERTOS_CONFIG_H
+
+/*-----------------------------------------------------------
+ * Application specific definitions.
+ *
+ * These definitions should be adjusted for your particular hardware and
+ * application requirements.
+ *
+ * These parameters and more are described within the 'configuration' section of the
+ * FreeRTOS API documentation available on the FreeRTOS.org web site.
+ *
+ * See http://www.freertos.org/a00110.html
+ *----------------------------------------------------------*/
+
+/* USER CODE BEGIN Includes */
+/* Section where include file can be added */
+/* USER CODE END Includes */
+
+/* Ensure definitions are only used by the compiler, and not by the assembler. */
+#if defined(__ICCARM__) || defined(__CC_ARM) || defined(__GNUC__)
+  #include <stdint.h>
+  extern uint32_t SystemCoreClock;
+#endif
+#define configENABLE_FPU                         0
+#define configENABLE_MPU                         0
+
+#define configUSE_PREEMPTION                     1
+#define configSUPPORT_STATIC_ALLOCATION          1
+#define configSUPPORT_DYNAMIC_ALLOCATION         1
+#define configUSE_IDLE_HOOK                      0
+#define configUSE_TICK_HOOK                      0
+#define configCPU_CLOCK_HZ                       ( SystemCoreClock )
+#define configTICK_RATE_HZ                       ((TickType_t)1000)
+#define configMAX_PRIORITIES                     ( 7 )
+#define configMINIMAL_STACK_SIZE                 ((uint16_t)128)
+#define configTOTAL_HEAP_SIZE                    ((size_t)15360)
+#define configMAX_TASK_NAME_LEN                  ( 16 )
+#define configUSE_16_BIT_TICKS                   0
+#define configUSE_MUTEXES                        1
+#define configQUEUE_REGISTRY_SIZE                8
+#define configUSE_PORT_OPTIMISED_TASK_SELECTION  1
+/* USER CODE BEGIN MESSAGE_BUFFER_LENGTH_TYPE */
+/* Defaults to size_t for backward compatibility, but can be changed
+   if lengths will always be less than the number of bytes in a size_t. */
+#define configMESSAGE_BUFFER_LENGTH_TYPE         size_t
+/* USER CODE END MESSAGE_BUFFER_LENGTH_TYPE */
+
+/* Co-routine definitions. */
+#define configUSE_CO_ROUTINES                    0
+#define configMAX_CO_ROUTINE_PRIORITIES          ( 2 )
+
+/* The following flag must be enabled only when using newlib */
+#define configUSE_NEWLIB_REENTRANT          1
+
+/* Set the following definitions to 1 to include the API function, or zero
+to exclude the API function. */
+#define INCLUDE_vTaskPrioritySet             1
+#define INCLUDE_uxTaskPriorityGet            1
+#define INCLUDE_vTaskDelete                  1
+#define INCLUDE_vTaskCleanUpResources        0
+#define INCLUDE_vTaskSuspend                 1
+#define INCLUDE_vTaskDelayUntil              0
+#define INCLUDE_vTaskDelay                   1
+#define INCLUDE_xTaskGetSchedulerState       1
+
+/* Cortex-M specific definitions. */
+#ifdef __NVIC_PRIO_BITS
+ /* __BVIC_PRIO_BITS will be specified when CMSIS is being used. */
+ #define configPRIO_BITS         __NVIC_PRIO_BITS
+#else
+ #define configPRIO_BITS         4
+#endif
+
+/* The lowest interrupt priority that can be used in a call to a "set priority"
+function. */
+#define configLIBRARY_LOWEST_INTERRUPT_PRIORITY   15
+
+/* The highest interrupt priority that can be used by any interrupt service
+routine that makes calls to interrupt safe FreeRTOS API functions.  DO NOT CALL
+INTERRUPT SAFE FREERTOS API FUNCTIONS FROM ANY INTERRUPT THAT HAS A HIGHER
+PRIORITY THAN THIS! (higher priorities are lower numeric values. */
+#define configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY 5
+
+/* Interrupt priorities used by the kernel port layer itself.  These are generic
+to all Cortex-M ports, and do not rely on any particular library functions. */
+#define configKERNEL_INTERRUPT_PRIORITY 		( configLIBRARY_LOWEST_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) )
+/* !!!! configMAX_SYSCALL_INTERRUPT_PRIORITY must not be set to zero !!!!
+See http://www.FreeRTOS.org/RTOS-Cortex-M3-M4.html. */
+#define configMAX_SYSCALL_INTERRUPT_PRIORITY 	( configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) )
+
+/* Normal assert() semantics without relying on the provision of an assert.h
+header file. */
+/* USER CODE BEGIN 1 */
+#define configASSERT( x ) if ((x) == 0) {taskDISABLE_INTERRUPTS(); for( ;; );}
+/* USER CODE END 1 */
+
+/* Definitions that map the FreeRTOS port interrupt handlers to their CMSIS
+standard names. */
+#define vPortSVCHandler    SVC_Handler
+#define xPortPendSVHandler PendSV_Handler
+
+/* IMPORTANT: This define is commented when used with STM32Cube firmware, when the timebase source is SysTick,
+              to prevent overwriting SysTick_Handler defined within STM32Cube HAL */
+
+#define xPortSysTickHandler SysTick_Handler
+
+/* USER CODE BEGIN Defines */
+/* Section where parameter definitions can be added (for instance, to override default ones in FreeRTOS.h) */
+/* USER CODE END Defines */
+
+#endif /* FREERTOS_CONFIG_H */
--- a/project/Core/Inc/NTP.h
+++ b/project/Core/Inc/NTP.h
@@ -0,0 +1,81 @@
+#pragma once
+
+#include <stdint.h>
+#include <string.h>
+
+#include "lwip.h"
+#include "udp.h"
+#include "dns.h"
+#include "pbuf.h"
+#include "ip_addr.h"
+
+#include "debug.h"
+
+#define NTP_OFFSET_TIMESTAMPS 40
+#define NTP_OFFSET_ROUNDING 44
+#define SECONDROUNDINGTHRESHOLD 115
+
+// the epoch for NTP starts in year 1900 while the epoch in UNIX starts in 1970
+// Unix time starts on Jan 1 1970. 7O years difference in seconds, that's 2208988800 seconds
+#define SEVENTYYEARS 2208988800UL
+
+//#define NTP_HOST_NAME "time1.google.com"
+#define NTP_HOST_NAME "pool.ntp.org"
+#define NTP_PORT 123
+
+#define NTP_PACKET_SIZE 48           // NTP time stamp is in the first 48 bytes of the message
+#define ntpFirstFourBytes 0xEC0600E3 // NTP request header, first 32 bits
+
+#define NTP_OFFSET_LI_VN_MODE      0
+#define NTP_LI_MASK                0xC0
+#define NTP_LI_NO_WARNING          (0x00 << 6)
+#define NTP_LI_LAST_MINUTE_61_SEC  (0x01 << 6)
+#define NTP_LI_LAST_MINUTE_59_SEC  (0x02 << 6)
+#define NTP_LI_ALARM_CONDITION     (0x03 << 6) /* (clock not synchronized) */
+
+#define NTP_VERSION_MASK           0x38
+#define NTP_VERSION                (4/* NTP Version 4*/<<3)
+
+#define NTP_MODE_MASK              0x07
+#define NTP_MODE_CLIENT            0x03
+#define NTP_MODE_SERVER            0x04
+#define NTP_MODE_BROADCAST         0x05
+
+#define NTP_OFFSET_STRATUM         1
+#define NTP_STRATUM_KOD            0x00
+
+#define NTP_OFFSET_ORIGINATE_TIME  24
+#define NTP_OFFSET_RECEIVE_TIME    32
+#define NTP_OFFSET_TRANSMIT_TIME   40
+
+typedef enum
+{
+    NTP_IDLE,
+    NTP_Receiving_DNS,
+    NTP_DNS_GOT_IP,
+    NTP_Receiving_UDP,
+    NTP_GOT_TIME,
+    NTP_ERROR
+} NTPState_t;
+
+PACK_STRUCT_BEGIN
+typedef struct {
+  PACK_STRUCT_FLD_8(uint8_t  li_vn_mode);
+  PACK_STRUCT_FLD_8(uint8_t  stratum);
+  PACK_STRUCT_FLD_8(uint8_t  poll);
+  PACK_STRUCT_FLD_8(uint8_t  precision);
+  PACK_STRUCT_FIELD(uint32_t root_delay);
+  PACK_STRUCT_FIELD(uint32_t root_dispersion);
+  PACK_STRUCT_FIELD(uint32_t reference_identifier);
+  PACK_STRUCT_FIELD(uint32_t reference_timestamp[2]);
+  PACK_STRUCT_FIELD(uint32_t originate_timestamp[2]);
+  PACK_STRUCT_FIELD(uint32_t receive_timestamp[2]);
+  PACK_STRUCT_FIELD(uint32_t transmit_timestamp[2]);
+} NTP_Frame;
+PACK_STRUCT_END
+
+
+uint32_t NTPToEpochUnix(void);
+void NTP_DNS_Callback(const char *name, const ip_addr_t *ipaddr, void *callback_arg);
+void NTP_RECV_CALLBACK(void *arg, struct udp_pcb *pcb, struct pbuf *p, const ip_addr_t *addr, u16_t port);
+
--- a/project/Core/Inc/RTC.h
+++ b/project/Core/Inc/RTC.h
@@ -0,0 +1,7 @@
+#include "debug.h"
+#include "Time.h"
+
+void Set_Time (RTC_TimeTypeDef sTime, RTC_DateTypeDef sDate);
+void Get_Time(RTC_DateTypeDef* gDate, RTC_TimeTypeDef* gTime);
+void Ts_To_RTC(ts* tm, RTC_TimeTypeDef* sTime, RTC_DateTypeDef* sDate);
+void RTC_To_Ts(RTC_TimeTypeDef* sTime, RTC_DateTypeDef* sDate, ts* tm);
--- a/project/Core/Inc/Time.h
+++ b/project/Core/Inc/Time.h
@@ -0,0 +1,51 @@
+#pragma once
+#include <stdint.h>
+#include "debug.h"
+
+/*
+ * TimeLib
+ * Based on the Time library by Michael Margolis (make and break time functions)
+ * Additions by: Sani7 (Sander Speetjens)
+*/
+
+// to transform a number of seconds into a current time you need to do some maths
+#define NUMBEROFSECONDSPERDAY 86400UL
+#define NUMBEROFSECONDSPERHOUR 3600UL
+#define NUMBEROFSECONDSPERMINUTE 60UL
+
+// leap year calculator expects year argument as years offset from 1970
+#define LEAP_YEAR(Y)     ( ((1970+(Y))>0) && !((1970+(Y))%4) && ( ((1970+(Y))%100) || !((1970+(Y))%400) ) )
+
+// you might not live in the UTC time zone, set up your delta time in hours
+#define UTC_DELTA_HOURS 1   // CET
+//#define UTC_DELTA_HOURS 2     // CEST
+/*Set offset time to adjust for your timezone, for example:
+  * GMT +1
+  * GMT +2
+  * GMT +8
+  * GMT -1
+  * GMT  0
+ */
+#define UTC_DELTA_MINUTES 0
+
+typedef struct {
+    uint8_t Second;         /* seconds */
+    uint8_t Minute;         /* minutes */
+    uint8_t Hour;           /* hours */
+    uint8_t Day;            /* day of the month */
+    uint8_t Month;          /* month */
+    int16_t Year;           /* year offset from 1970 */
+    uint8_t Wday;           /* day of the week */
+    uint8_t Yday;           /* day in the year */
+    uint8_t IsDST;          /* daylight saving time */
+
+    uint32_t unixtime;      /* seconds since 01.01.1970 00:00:00 UTC*/
+} ts;
+
+enum Wday_e {Sun = 1, Mon, Tue, Wed, Thu, Fri, Sat};
+
+uint8_t IsDST(ts* tm);
+void breakTime(uint32_t timeInput, ts *tm, uint8_t runIsDST);
+uint32_t makeTime(ts *tm, uint8_t runIsDST);
+void toTimeZone(ts *utc, ts* local, int8_t timeZone, uint8_t IsDST);
+void TimeDiff(ts* time1, ts* time2, ts* diff);
--- a/project/Core/Inc/clock.h
+++ b/project/Core/Inc/clock.h
@@ -0,0 +1,21 @@
+#pragma once
+
+#define __USE_MISC
+#include <math.h>
+#include <stdint.h>
+#include <stdio.h>
+#include <string.h>
+
+#include "stm32746g_discovery_lcd.h"
+
+#define SCREEN_WIDTH 480
+#define SCREEN_HEIGHT 260
+#define min(x, y) ((x) < (y) ? (x) : (y))
+#define Radius (min(SCREEN_HEIGHT, SCREEN_WIDTH) / 2 - 1)
+
+#define X_CENTER (SCREEN_WIDTH / 2)
+#define Y_CENTER (SCREEN_HEIGHT / 2) + 5
+
+void Clock_Draw_Outline(uint16_t xCenter, uint16_t yCenter, double radius);
+void Clock_Draw_Hands(uint16_t xCenter, uint16_t yCenter, double radius, uint8_t hours, uint8_t minutes, uint8_t seconds);
+void Clock_Write_Date(uint16_t xCenter, uint16_t xOffset, uint16_t yCenter, uint16_t yOffset, uint8_t Wday, uint8_t Day, uint8_t Month, uint16_t Year);
--- a/project/Core/Inc/debug.h
+++ b/project/Core/Inc/debug.h
@@ -0,0 +1,64 @@
+/*
+ * debug.h
+ *
+ *  Created on: Oct 7, 2022
+ *      Author: sanderspeetjens
+ */
+
+#ifndef INC_DEBUG_H_
+#define INC_DEBUG_H_
+
+#include "stm32f7xx_hal.h"
+
+#include <errno.h>
+#include <stdio.h>
+#include <sys/stat.h>
+#include <sys/times.h>
+#include <sys/unistd.h>
+
+#define enableDebug 1
+#if enableDebug == 1
+#define debug(fmt, ...) printf("\033[32m"fmt"\033[0m", ##__VA_ARGS__)
+#define debugln(fmt, ...) printf("\033[32m"fmt"\033[0m\n", ##__VA_ARGS__)
+#define debugWarn(fmt, ...) printf("\033[33m"fmt"\033[0m", ##__VA_ARGS__)
+#define debugWarnln(fmt, ...) printf("\033[33m"fmt"\033[0m\n", ##__VA_ARGS__)
+#define debugErr(fmt, ...) printf("\033[31m"fmt"\033[0m", ##__VA_ARGS__)
+#define debugErrln(fmt, ...) printf("\033[31m"fmt"\033[0m\n", ##__VA_ARGS__)
+#else
+#define debug(fmt, ...)
+#define debugln(fmt, ...)
+#define debugWarn(fmt, ...)
+#define debugWarnln(fmt, ...)
+#define debugErr(fmt, ...)
+#define debugErrln(fmt, ...)
+#endif
+
+#define ANSI_ESC "\x1B"
+#define ANSI_CSI "\x9B"
+#define ANSI_DCS "\x90"
+#define ANSI_OSC "\x9D"
+
+#define CLEAR_SCREEN "\033c"
+
+#define CURSOR_RESET ANSI_ESC "[H"
+#define CURSOR_UP(n) ANSI_ESC "[" #n "A"
+#define CURSOR_DOWN(n) ANSI_ESC "[" #n "B"
+#define CURSOR_RIGHT(n) ANSI_ESC "[" #n "C"
+#define CURSOR_LEFT(n) ANSI_ESC "[" #n "D"
+#define CURSOR_NEXT_N_LINES(n) ANSI_ESC "[" #n "E"
+#define CURSOR_PREV_N_LINES(n) ANSI_ESC "[" #n "F"
+#define CURSOR_COL(n) ANSI_ESC "[" #n "G"
+#define CURSOR_POS ANSI_ESC "[" #n ";" #n "H"
+#define CURSOR_SAVE ANSI_ESC "7"
+#define CURSOR_RESTORE ANSI_ESC "8"
+
+#define ERASE_FROM_CURSOR_TO_END ANSI_ESC "[0J"
+#define ERASE_FROM_CURSOR_TO_BEGINNING ANSI_ESC "[1J"
+#define ERASE_ENTIRE_SCREEN ANSI_ESC "[2J"
+#define ERASE_FROM_CURSOR_TO_END_LINE ANSI_ESC "[0K"
+#define ERASE_FROM_CURSOR_TO_BEGINNING_LINE ANSI_ESC "[1K"
+#define ERASE_ENTIRE_LINE ANSI_ESC "[2K"
+
+int _write(int file, char *ptr, int len);
+int _read(int fd, char* ptr, int len);
+#endif /* INC_DEBUG_H_ */
--- a/project/Core/Inc/ds3231_for_stm32_hal.h
+++ b/project/Core/Inc/ds3231_for_stm32_hal.h
@@ -0,0 +1,133 @@
+
+/* An STM32 HAL library written for the DS3231 real-time clock IC.
+ * Based on a Library by @eepj www.github.com/eepj
+ * Moddifications by Sani7
+ */
+
+#ifndef DS3231_FOR_STM32_HAL_H
+#define DS3231_FOR_STM32_HAL_H
+#include "main.h"
+#include "Time.h"
+/*----------------------------------------------------------------------------*/
+#define DS3231_I2C_ADDR 	0x68
+
+#define DS3231_REG_SECOND 	0x00
+#define DS3231_REG_MINUTE 	0x01
+#define DS3231_REG_HOUR  	0x02
+#define DS3231_REG_DOW    	0x03
+
+#define DS3231_REG_DATE   	0x04
+#define DS3231_REG_MONTH  	0x05
+	#define DS3231_CENTURY 		7
+#define DS3231_REG_YEAR   	0x06
+
+#define DS3231_A1_SECOND	0x07
+#define DS3231_A1_MINUTE	0x08
+#define DS3231_A1_HOUR		0x09
+#define DS3231_A1_DATE		0x0a
+
+#define DS3231_A2_MINUTE	0x0b
+#define DS3231_A2_HOUR		0x0c
+#define DS3231_A2_DATE		0x0d
+
+#define DS3231_AXMY			7
+#define DS3231_DYDT			6
+
+#define DS3231_REG_CONTROL 	0x0e
+	#define DS3231_EOSC			7
+	#define DS3231_BBSQW		6
+	#define DS3231_CONV			5
+	#define DS3231_RS2			4
+	#define DS3231_RS1			3
+	#define DS3231_INTCN		2
+	#define DS3231_A2IE			1
+	#define DS3231_A1IE			0
+
+#define DS3231_REG_STATUS	0x0f
+	#define DS3231_OSF			7
+	#define DS3231_EN32KHZ		3
+	#define DS3231_BSY			2
+	#define DS3231_A2F			1
+	#define DS3231_A1F			0
+
+#define DS3231_AGING		0x10
+
+#define DS3231_TEMP_MSB		0x11
+#define DS3231_TEMP_LSB		0x12
+
+#define DS3231_TIMEOUT		HAL_MAX_DELAY
+/*----------------------------------------------------------------------------*/
+typedef enum DS3231_Rate{
+	DS3231_1HZ, DS3231_1024HZ, DS3231_4096HZ, DS3231_8192HZ
+}DS3231_Rate;
+
+typedef enum DS3231_InterruptMode{
+	DS3231_SQUARE_WAVE_INTERRUPT, DS3231_ALARM_INTERRUPT
+}DS3231_InterruptMode;
+
+typedef enum DS3231_State{
+	DS3231_DISABLED, DS3231_ENABLED
+}DS3231_State;
+
+typedef enum D3231_Alarm1Mode{
+	DS3231_A1_EVERY_S = 0x0f, DS3231_A1_MATCH_S = 0x0e, DS3231_A1_MATCH_S_M = 0x0c, DS3231_A1_MATCH_S_M_H = 0x08, DS3231_A1_MATCH_S_M_H_DATE = 0x00, DS3231_A1_MATCH_S_M_H_DAY = 0x80,
+}DS3231_Alarm1Mode;
+
+typedef enum D3231_Alarm2Mode{
+	DS3231_A2_EVERY_M = 0x07, DS3231_A2_MATCH_M = 0x06, DS3231_A2_MATCH_M_H = 0x04, DS3231_A2_MATCH_M_H_DATE = 0x00, DS3231_A2_MATCH_M_H_DAY = 0x80,
+}DS3231_Alarm2Mode;
+
+//typedef struct {
+//    uint8_t Second;         /* seconds */
+//    uint8_t Minute;         /* minutes */
+//    uint8_t Hour;           /* hours */
+//    uint8_t Day;            /* day of the month */
+//    uint8_t Month;          /* month */
+//    int16_t Year;           /* year offset from 1970 */
+//    uint8_t Wday;           /* day of the week */
+//    uint8_t Yday;           /* day in the year */
+//    uint8_t IsDST;          /* daylight saving time */
+//
+//    uint32_t unixtime;      /* seconds since 01.01.1970 00:00:00 UTC*/
+//} ts;
+
+extern I2C_HandleTypeDef *_ds3231_ui2c;
+
+void DS3231_Init(I2C_HandleTypeDef *hi2c);
+
+void DS3231_SetRegByte(uint8_t regAddr, uint8_t val);
+uint8_t DS3231_GetRegByte(uint8_t regAddr);
+
+void DS3231_EnableBatterySquareWave(DS3231_State enable);
+void DS3231_SetInterruptMode(DS3231_InterruptMode mode);
+void DS3231_SetRateSelect(DS3231_Rate rate);
+void DS3231_EnableOscillator(DS3231_State enable);
+
+void DS3231_EnableAlarm2(DS3231_State enable);
+void DS3231_SetAlarm2Mode(DS3231_Alarm2Mode alarmMode);
+void DS3231_ClearAlarm2Flag();
+void DS3231_SetAlarm2Time(ts* time);
+
+void DS3231_EnableAlarm1(DS3231_State enable);
+void DS3231_SetAlarm1Mode(DS3231_Alarm1Mode alarmMode);
+void DS3231_ClearAlarm1Flag();
+void DS3231_SetAlarm1Time(ts* time);
+
+uint8_t DS3231_IsOscillatorStopped();
+uint8_t DS3231_Is32kHzEnabled();
+uint8_t DS3231_IsAlarm1Triggered();
+uint8_t DS3231_IsAlarm2Triggered();
+
+void DS3231_GetTime(ts* time);
+
+void DS3231_SetTime(ts* time);
+
+uint8_t DS3231_DecodeBCD(uint8_t bin);
+uint8_t DS3231_EncodeBCD(uint8_t dec);
+
+void DS3231_Enable32kHzOutput(DS3231_State enable);
+
+int8_t DS3231_GetTemperatureInteger();
+uint8_t DS3231_GetTemperatureFraction();
+
+#endif
--- a/project/Core/Inc/main.h
+++ b/project/Core/Inc/main.h
@@ -0,0 +1,75 @@
+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file           : main.h
+  * @brief          : Header for main.c file.
+  *                   This file contains the common defines of the application.
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2022 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+/* USER CODE END Header */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __MAIN_H
+#define __MAIN_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal.h"
+
+/* Private includes ----------------------------------------------------------*/
+/* USER CODE BEGIN Includes */
+/* USER CODE END Includes */
+
+/* Exported types ------------------------------------------------------------*/
+/* USER CODE BEGIN ET */
+
+/* USER CODE END ET */
+
+/* Exported constants --------------------------------------------------------*/
+/* USER CODE BEGIN EC */
+
+/* USER CODE END EC */
+
+/* Exported macro ------------------------------------------------------------*/
+/* USER CODE BEGIN EM */
+
+/* USER CODE END EM */
+
+/* Exported functions prototypes ---------------------------------------------*/
+void Error_Handler(void);
+
+/* USER CODE BEGIN EFP */
+/* USER CODE END EFP */
+
+/* Private defines -----------------------------------------------------------*/
+#define LCD_BL_CTRL_Pin GPIO_PIN_3
+#define LCD_BL_CTRL_GPIO_Port GPIOK
+#define LED_Pin GPIO_PIN_1
+#define LED_GPIO_Port GPIOI
+#define LCD_DISP_Pin GPIO_PIN_12
+#define LCD_DISP_GPIO_Port GPIOI
+#define BUTTON_Pin GPIO_PIN_11
+#define BUTTON_GPIO_Port GPIOI
+
+/* USER CODE BEGIN Private defines */
+
+/* USER CODE END Private defines */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __MAIN_H */
--- a/project/Core/Inc/stm32f7xx_hal_conf.h
+++ b/project/Core/Inc/stm32f7xx_hal_conf.h
@@ -0,0 +1,479 @@
+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file    stm32f7xx_hal_conf_template.h
+  * @author  MCD Application Team
+  * @brief   HAL configuration template file.
+  *          This file should be copied to the application folder and renamed
+  *          to stm32f7xx_hal_conf.h.
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+/* USER CODE END Header */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F7xx_HAL_CONF_H
+#define __STM32F7xx_HAL_CONF_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/* ########################## Module Selection ############################## */
+/**
+  * @brief This is the list of modules to be used in the HAL driver
+  */
+#define HAL_MODULE_ENABLED
+
+  /* #define HAL_CRYP_MODULE_ENABLED */
+/* #define HAL_ADC_MODULE_ENABLED */
+/* #define HAL_CAN_MODULE_ENABLED */
+/* #define HAL_CEC_MODULE_ENABLED */
+/* #define HAL_CRC_MODULE_ENABLED */
+/* #define HAL_DAC_MODULE_ENABLED */
+/* #define HAL_DCMI_MODULE_ENABLED */
+#define HAL_DMA2D_MODULE_ENABLED
+#define HAL_ETH_MODULE_ENABLED
+/* #define HAL_NAND_MODULE_ENABLED */
+/* #define HAL_NOR_MODULE_ENABLED */
+/* #define HAL_SRAM_MODULE_ENABLED */
+#define HAL_SDRAM_MODULE_ENABLED
+/* #define HAL_HASH_MODULE_ENABLED */
+/* #define HAL_I2S_MODULE_ENABLED */
+/* #define HAL_IWDG_MODULE_ENABLED */
+/* #define HAL_LPTIM_MODULE_ENABLED */
+#define HAL_LTDC_MODULE_ENABLED
+/* #define HAL_QSPI_MODULE_ENABLED */
+/* #define HAL_RNG_MODULE_ENABLED */
+#define HAL_RTC_MODULE_ENABLED
+/* #define HAL_SAI_MODULE_ENABLED */
+/* #define HAL_SD_MODULE_ENABLED */
+/* #define HAL_MMC_MODULE_ENABLED */
+/* #define HAL_SPDIFRX_MODULE_ENABLED */
+/* #define HAL_SPI_MODULE_ENABLED */
+#define HAL_TIM_MODULE_ENABLED
+#define HAL_UART_MODULE_ENABLED
+/* #define HAL_USART_MODULE_ENABLED */
+/* #define HAL_IRDA_MODULE_ENABLED */
+/* #define HAL_SMARTCARD_MODULE_ENABLED */
+/* #define HAL_WWDG_MODULE_ENABLED */
+/* #define HAL_PCD_MODULE_ENABLED */
+/* #define HAL_HCD_MODULE_ENABLED */
+/* #define HAL_DFSDM_MODULE_ENABLED */
+/* #define HAL_DSI_MODULE_ENABLED */
+/* #define HAL_JPEG_MODULE_ENABLED */
+/* #define HAL_MDIOS_MODULE_ENABLED */
+/* #define HAL_SMBUS_MODULE_ENABLED */
+/* #define HAL_EXTI_MODULE_ENABLED */
+#define HAL_GPIO_MODULE_ENABLED
+#define HAL_EXTI_MODULE_ENABLED
+#define HAL_DMA_MODULE_ENABLED
+#define HAL_RCC_MODULE_ENABLED
+#define HAL_FLASH_MODULE_ENABLED
+#define HAL_PWR_MODULE_ENABLED
+#define HAL_I2C_MODULE_ENABLED
+#define HAL_CORTEX_MODULE_ENABLED
+
+/* ########################## HSE/HSI Values adaptation ##################### */
+/**
+  * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
+  *        This value is used by the RCC HAL module to compute the system frequency
+  *        (when HSE is used as system clock source, directly or through the PLL).
+  */
+#if !defined  (HSE_VALUE)
+  #define HSE_VALUE    ((uint32_t)25000000U) /*!< Value of the External oscillator in Hz */
+#endif /* HSE_VALUE */
+
+#if !defined  (HSE_STARTUP_TIMEOUT)
+  #define HSE_STARTUP_TIMEOUT    ((uint32_t)100U)   /*!< Time out for HSE start up, in ms */
+#endif /* HSE_STARTUP_TIMEOUT */
+
+/**
+  * @brief Internal High Speed oscillator (HSI) value.
+  *        This value is used by the RCC HAL module to compute the system frequency
+  *        (when HSI is used as system clock source, directly or through the PLL).
+  */
+#if !defined  (HSI_VALUE)
+  #define HSI_VALUE    ((uint32_t)16000000U) /*!< Value of the Internal oscillator in Hz*/
+#endif /* HSI_VALUE */
+
+/**
+  * @brief Internal Low Speed oscillator (LSI) value.
+  */
+#if !defined  (LSI_VALUE)
+ #define LSI_VALUE  ((uint32_t)32000U)       /*!< LSI Typical Value in Hz*/
+#endif /* LSI_VALUE */                      /*!< Value of the Internal Low Speed oscillator in Hz
+                                             The real value may vary depending on the variations
+                                             in voltage and temperature.  */
+/**
+  * @brief External Low Speed oscillator (LSE) value.
+  */
+#if !defined  (LSE_VALUE)
+ #define LSE_VALUE  ((uint32_t)32768U)    /*!< Value of the External Low Speed oscillator in Hz */
+#endif /* LSE_VALUE */
+
+#if !defined  (LSE_STARTUP_TIMEOUT)
+  #define LSE_STARTUP_TIMEOUT    ((uint32_t)5000U)   /*!< Time out for LSE start up, in ms */
+#endif /* LSE_STARTUP_TIMEOUT */
+
+/**
+  * @brief External clock source for I2S peripheral
+  *        This value is used by the I2S HAL module to compute the I2S clock source
+  *        frequency, this source is inserted directly through I2S_CKIN pad.
+  */
+#if !defined  (EXTERNAL_CLOCK_VALUE)
+  #define EXTERNAL_CLOCK_VALUE    ((uint32_t)12288000U) /*!< Value of the Internal oscillator in Hz*/
+#endif /* EXTERNAL_CLOCK_VALUE */
+
+/* Tip: To avoid modifying this file each time you need to use different HSE,
+   ===  you can define the HSE value in your toolchain compiler preprocessor. */
+
+/* ########################### System Configuration ######################### */
+/**
+  * @brief This is the HAL system configuration section
+  */
+#define  VDD_VALUE                    3300U /*!< Value of VDD in mv */
+#define  TICK_INT_PRIORITY            ((uint32_t)15U) /*!< tick interrupt priority */
+#define  USE_RTOS                     0U
+#define  PREFETCH_ENABLE              0U
+#define  ART_ACCELERATOR_ENABLE        0U /* To enable instruction cache and prefetch */
+
+#define  USE_HAL_ADC_REGISTER_CALLBACKS         0U /* ADC register callback disabled       */
+#define  USE_HAL_CAN_REGISTER_CALLBACKS         0U /* CAN register callback disabled       */
+#define  USE_HAL_CEC_REGISTER_CALLBACKS         0U /* CEC register callback disabled       */
+#define  USE_HAL_CRYP_REGISTER_CALLBACKS        0U /* CRYP register callback disabled      */
+#define  USE_HAL_DAC_REGISTER_CALLBACKS         0U /* DAC register callback disabled       */
+#define  USE_HAL_DCMI_REGISTER_CALLBACKS        0U /* DCMI register callback disabled      */
+#define  USE_HAL_DFSDM_REGISTER_CALLBACKS       0U /* DFSDM register callback disabled     */
+#define  USE_HAL_DMA2D_REGISTER_CALLBACKS       0U /* DMA2D register callback disabled     */
+#define  USE_HAL_DSI_REGISTER_CALLBACKS         0U /* DSI register callback disabled       */
+#define  USE_HAL_ETH_REGISTER_CALLBACKS         0U /* ETH register callback disabled       */
+#define  USE_HAL_HASH_REGISTER_CALLBACKS        0U /* HASH register callback disabled      */
+#define  USE_HAL_HCD_REGISTER_CALLBACKS         0U /* HCD register callback disabled       */
+#define  USE_HAL_I2C_REGISTER_CALLBACKS         0U /* I2C register callback disabled       */
+#define  USE_HAL_I2S_REGISTER_CALLBACKS         0U /* I2S register callback disabled       */
+#define  USE_HAL_IRDA_REGISTER_CALLBACKS        0U /* IRDA register callback disabled      */
+#define  USE_HAL_JPEG_REGISTER_CALLBACKS        0U /* JPEG register callback disabled      */
+#define  USE_HAL_LPTIM_REGISTER_CALLBACKS       0U /* LPTIM register callback disabled     */
+#define  USE_HAL_LTDC_REGISTER_CALLBACKS        0U /* LTDC register callback disabled      */
+#define  USE_HAL_MDIOS_REGISTER_CALLBACKS       0U /* MDIOS register callback disabled     */
+#define  USE_HAL_MMC_REGISTER_CALLBACKS         0U /* MMC register callback disabled       */
+#define  USE_HAL_NAND_REGISTER_CALLBACKS        0U /* NAND register callback disabled      */
+#define  USE_HAL_NOR_REGISTER_CALLBACKS         0U /* NOR register callback disabled       */
+#define  USE_HAL_PCD_REGISTER_CALLBACKS         0U /* PCD register callback disabled       */
+#define  USE_HAL_QSPI_REGISTER_CALLBACKS        0U /* QSPI register callback disabled      */
+#define  USE_HAL_RNG_REGISTER_CALLBACKS         0U /* RNG register callback disabled       */
+#define  USE_HAL_RTC_REGISTER_CALLBACKS         0U /* RTC register callback disabled       */
+#define  USE_HAL_SAI_REGISTER_CALLBACKS         0U /* SAI register callback disabled       */
+#define  USE_HAL_SD_REGISTER_CALLBACKS          0U /* SD register callback disabled        */
+#define  USE_HAL_SMARTCARD_REGISTER_CALLBACKS   0U /* SMARTCARD register callback disabled */
+#define  USE_HAL_SDRAM_REGISTER_CALLBACKS       0U /* SDRAM register callback disabled     */
+#define  USE_HAL_SRAM_REGISTER_CALLBACKS        0U /* SRAM register callback disabled      */
+#define  USE_HAL_SPDIFRX_REGISTER_CALLBACKS     0U /* SPDIFRX register callback disabled   */
+#define  USE_HAL_SMBUS_REGISTER_CALLBACKS       0U /* SMBUS register callback disabled     */
+#define  USE_HAL_SPI_REGISTER_CALLBACKS         0U /* SPI register callback disabled       */
+#define  USE_HAL_TIM_REGISTER_CALLBACKS         0U /* TIM register callback disabled       */
+#define  USE_HAL_UART_REGISTER_CALLBACKS        0U /* UART register callback disabled      */
+#define  USE_HAL_USART_REGISTER_CALLBACKS       0U /* USART register callback disabled     */
+#define  USE_HAL_WWDG_REGISTER_CALLBACKS        0U /* WWDG register callback disabled      */
+
+/* ########################## Assert Selection ############################## */
+/**
+  * @brief Uncomment the line below to expanse the "assert_param" macro in the
+  *        HAL drivers code
+  */
+/* #define USE_FULL_ASSERT    1U */
+
+/* ################## Ethernet peripheral configuration ##################### */
+
+/* Section 1 : Ethernet peripheral configuration */
+
+/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */
+#define MAC_ADDR0   2U
+#define MAC_ADDR1   0U
+#define MAC_ADDR2   0U
+#define MAC_ADDR3   0U
+#define MAC_ADDR4   0U
+#define MAC_ADDR5   0U
+
+/* Definition of the Ethernet driver buffers size and count */
+#define ETH_RX_BUF_SIZE                1536 /* buffer size for receive               */
+#define ETH_TX_BUF_SIZE                ETH_MAX_PACKET_SIZE /* buffer size for transmit              */
+#define ETH_RXBUFNB                    ((uint32_t)4U)       /* 4 Rx buffers of size ETH_RX_BUF_SIZE  */
+#define ETH_TXBUFNB                    ((uint32_t)4U)       /* 4 Tx buffers of size ETH_TX_BUF_SIZE  */
+
+/* Section 2: PHY configuration section */
+
+/* DP83848_PHY_ADDRESS Address*/
+#define DP83848_PHY_ADDRESS           0x01U
+/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/
+#define PHY_RESET_DELAY                 ((uint32_t)0x000000FFU)
+/* PHY Configuration delay */
+#define PHY_CONFIG_DELAY                ((uint32_t)0x00000FFFU)
+
+#define PHY_READ_TO                     ((uint32_t)0x0000FFFFU)
+#define PHY_WRITE_TO                    ((uint32_t)0x0000FFFFU)
+
+/* Section 3: Common PHY Registers */
+
+#define PHY_BCR                         ((uint16_t)0x0000U)    /*!< Transceiver Basic Control Register   */
+#define PHY_BSR                         ((uint16_t)0x0001U)    /*!< Transceiver Basic Status Register    */
+
+#define PHY_RESET                       ((uint16_t)0x8000U)  /*!< PHY Reset */
+#define PHY_LOOPBACK                    ((uint16_t)0x4000U)  /*!< Select loop-back mode */
+#define PHY_FULLDUPLEX_100M             ((uint16_t)0x2100U)  /*!< Set the full-duplex mode at 100 Mb/s */
+#define PHY_HALFDUPLEX_100M             ((uint16_t)0x2000U)  /*!< Set the half-duplex mode at 100 Mb/s */
+#define PHY_FULLDUPLEX_10M              ((uint16_t)0x0100U)  /*!< Set the full-duplex mode at 10 Mb/s  */
+#define PHY_HALFDUPLEX_10M              ((uint16_t)0x0000U)  /*!< Set the half-duplex mode at 10 Mb/s  */
+#define PHY_AUTONEGOTIATION             ((uint16_t)0x1000U)  /*!< Enable auto-negotiation function     */
+#define PHY_RESTART_AUTONEGOTIATION     ((uint16_t)0x0200U)  /*!< Restart auto-negotiation function    */
+#define PHY_POWERDOWN                   ((uint16_t)0x0800U)  /*!< Select the power down mode           */
+#define PHY_ISOLATE                     ((uint16_t)0x0400U)  /*!< Isolate PHY from MII                 */
+
+#define PHY_AUTONEGO_COMPLETE           ((uint16_t)0x0020U)  /*!< Auto-Negotiation process completed   */
+#define PHY_LINKED_STATUS               ((uint16_t)0x0004U)  /*!< Valid link established               */
+#define PHY_JABBER_DETECTION            ((uint16_t)0x0002U)  /*!< Jabber condition detected            */
+
+/* Section 4: Extended PHY Registers */
+#define PHY_SR                          ((uint16_t)0x10U)    /*!< PHY status register Offset                      */
+
+#define PHY_SPEED_STATUS                ((uint16_t)0x0002U)  /*!< PHY Speed mask                                  */
+#define PHY_DUPLEX_STATUS               ((uint16_t)0x0004U)  /*!< PHY Duplex mask                                 */
+
+/* ################## SPI peripheral configuration ########################## */
+
+/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver
+* Activated: CRC code is present inside driver
+* Deactivated: CRC code cleaned from driver
+*/
+
+#define USE_SPI_CRC                     0U
+
+/* Includes ------------------------------------------------------------------*/
+/**
+  * @brief Include module's header file
+  */
+
+#ifdef HAL_RCC_MODULE_ENABLED
+  #include "stm32f7xx_hal_rcc.h"
+#endif /* HAL_RCC_MODULE_ENABLED */
+
+#ifdef HAL_EXTI_MODULE_ENABLED
+  #include "stm32f7xx_hal_exti.h"
+#endif /* HAL_EXTI_MODULE_ENABLED */
+
+#ifdef HAL_GPIO_MODULE_ENABLED
+  #include "stm32f7xx_hal_gpio.h"
+#endif /* HAL_GPIO_MODULE_ENABLED */
+
+#ifdef HAL_DMA_MODULE_ENABLED
+  #include "stm32f7xx_hal_dma.h"
+#endif /* HAL_DMA_MODULE_ENABLED */
+
+#ifdef HAL_CORTEX_MODULE_ENABLED
+  #include "stm32f7xx_hal_cortex.h"
+#endif /* HAL_CORTEX_MODULE_ENABLED */
+
+#ifdef HAL_ADC_MODULE_ENABLED
+  #include "stm32f7xx_hal_adc.h"
+#endif /* HAL_ADC_MODULE_ENABLED */
+
+#ifdef HAL_CAN_MODULE_ENABLED
+  #include "stm32f7xx_hal_can.h"
+#endif /* HAL_CAN_MODULE_ENABLED */
+
+#ifdef HAL_CEC_MODULE_ENABLED
+  #include "stm32f7xx_hal_cec.h"
+#endif /* HAL_CEC_MODULE_ENABLED */
+
+#ifdef HAL_CRC_MODULE_ENABLED
+  #include "stm32f7xx_hal_crc.h"
+#endif /* HAL_CRC_MODULE_ENABLED */
+
+#ifdef HAL_CRYP_MODULE_ENABLED
+  #include "stm32f7xx_hal_cryp.h"
+#endif /* HAL_CRYP_MODULE_ENABLED */
+
+#ifdef HAL_DMA2D_MODULE_ENABLED
+  #include "stm32f7xx_hal_dma2d.h"
+#endif /* HAL_DMA2D_MODULE_ENABLED */
+
+#ifdef HAL_DAC_MODULE_ENABLED
+  #include "stm32f7xx_hal_dac.h"
+#endif /* HAL_DAC_MODULE_ENABLED */
+
+#ifdef HAL_DCMI_MODULE_ENABLED
+  #include "stm32f7xx_hal_dcmi.h"
+#endif /* HAL_DCMI_MODULE_ENABLED */
+
+#ifdef HAL_ETH_MODULE_ENABLED
+  #include "stm32f7xx_hal_eth.h"
+#endif /* HAL_ETH_MODULE_ENABLED */
+
+#ifdef HAL_FLASH_MODULE_ENABLED
+  #include "stm32f7xx_hal_flash.h"
+#endif /* HAL_FLASH_MODULE_ENABLED */
+
+#ifdef HAL_SRAM_MODULE_ENABLED
+  #include "stm32f7xx_hal_sram.h"
+#endif /* HAL_SRAM_MODULE_ENABLED */
+
+#ifdef HAL_NOR_MODULE_ENABLED
+  #include "stm32f7xx_hal_nor.h"
+#endif /* HAL_NOR_MODULE_ENABLED */
+
+#ifdef HAL_NAND_MODULE_ENABLED
+  #include "stm32f7xx_hal_nand.h"
+#endif /* HAL_NAND_MODULE_ENABLED */
+
+#ifdef HAL_SDRAM_MODULE_ENABLED
+  #include "stm32f7xx_hal_sdram.h"
+#endif /* HAL_SDRAM_MODULE_ENABLED */
+
+#ifdef HAL_HASH_MODULE_ENABLED
+ #include "stm32f7xx_hal_hash.h"
+#endif /* HAL_HASH_MODULE_ENABLED */
+
+#ifdef HAL_I2C_MODULE_ENABLED
+ #include "stm32f7xx_hal_i2c.h"
+#endif /* HAL_I2C_MODULE_ENABLED */
+
+#ifdef HAL_I2S_MODULE_ENABLED
+ #include "stm32f7xx_hal_i2s.h"
+#endif /* HAL_I2S_MODULE_ENABLED */
+
+#ifdef HAL_IWDG_MODULE_ENABLED
+ #include "stm32f7xx_hal_iwdg.h"
+#endif /* HAL_IWDG_MODULE_ENABLED */
+
+#ifdef HAL_LPTIM_MODULE_ENABLED
+ #include "stm32f7xx_hal_lptim.h"
+#endif /* HAL_LPTIM_MODULE_ENABLED */
+
+#ifdef HAL_LTDC_MODULE_ENABLED
+ #include "stm32f7xx_hal_ltdc.h"
+#endif /* HAL_LTDC_MODULE_ENABLED */
+
+#ifdef HAL_PWR_MODULE_ENABLED
+ #include "stm32f7xx_hal_pwr.h"
+#endif /* HAL_PWR_MODULE_ENABLED */
+
+#ifdef HAL_QSPI_MODULE_ENABLED
+ #include "stm32f7xx_hal_qspi.h"
+#endif /* HAL_QSPI_MODULE_ENABLED */
+
+#ifdef HAL_RNG_MODULE_ENABLED
+ #include "stm32f7xx_hal_rng.h"
+#endif /* HAL_RNG_MODULE_ENABLED */
+
+#ifdef HAL_RTC_MODULE_ENABLED
+ #include "stm32f7xx_hal_rtc.h"
+#endif /* HAL_RTC_MODULE_ENABLED */
+
+#ifdef HAL_SAI_MODULE_ENABLED
+ #include "stm32f7xx_hal_sai.h"
+#endif /* HAL_SAI_MODULE_ENABLED */
+
+#ifdef HAL_SD_MODULE_ENABLED
+ #include "stm32f7xx_hal_sd.h"
+#endif /* HAL_SD_MODULE_ENABLED */
+
+#ifdef HAL_MMC_MODULE_ENABLED
+ #include "stm32f7xx_hal_mmc.h"
+#endif /* HAL_MMC_MODULE_ENABLED */
+
+#ifdef HAL_SPDIFRX_MODULE_ENABLED
+ #include "stm32f7xx_hal_spdifrx.h"
+#endif /* HAL_SPDIFRX_MODULE_ENABLED */
+
+#ifdef HAL_SPI_MODULE_ENABLED
+ #include "stm32f7xx_hal_spi.h"
+#endif /* HAL_SPI_MODULE_ENABLED */
+
+#ifdef HAL_TIM_MODULE_ENABLED
+ #include "stm32f7xx_hal_tim.h"
+#endif /* HAL_TIM_MODULE_ENABLED */
+
+#ifdef HAL_UART_MODULE_ENABLED
+ #include "stm32f7xx_hal_uart.h"
+#endif /* HAL_UART_MODULE_ENABLED */
+
+#ifdef HAL_USART_MODULE_ENABLED
+ #include "stm32f7xx_hal_usart.h"
+#endif /* HAL_USART_MODULE_ENABLED */
+
+#ifdef HAL_IRDA_MODULE_ENABLED
+ #include "stm32f7xx_hal_irda.h"
+#endif /* HAL_IRDA_MODULE_ENABLED */
+
+#ifdef HAL_SMARTCARD_MODULE_ENABLED
+ #include "stm32f7xx_hal_smartcard.h"
+#endif /* HAL_SMARTCARD_MODULE_ENABLED */
+
+#ifdef HAL_WWDG_MODULE_ENABLED
+ #include "stm32f7xx_hal_wwdg.h"
+#endif /* HAL_WWDG_MODULE_ENABLED */
+
+#ifdef HAL_PCD_MODULE_ENABLED
+ #include "stm32f7xx_hal_pcd.h"
+#endif /* HAL_PCD_MODULE_ENABLED */
+
+#ifdef HAL_HCD_MODULE_ENABLED
+ #include "stm32f7xx_hal_hcd.h"
+#endif /* HAL_HCD_MODULE_ENABLED */
+
+#ifdef HAL_DFSDM_MODULE_ENABLED
+ #include "stm32f7xx_hal_dfsdm.h"
+#endif /* HAL_DFSDM_MODULE_ENABLED */
+
+#ifdef HAL_DSI_MODULE_ENABLED
+ #include "stm32f7xx_hal_dsi.h"
+#endif /* HAL_DSI_MODULE_ENABLED */
+
+#ifdef HAL_JPEG_MODULE_ENABLED
+ #include "stm32f7xx_hal_jpeg.h"
+#endif /* HAL_JPEG_MODULE_ENABLED */
+
+#ifdef HAL_MDIOS_MODULE_ENABLED
+ #include "stm32f7xx_hal_mdios.h"
+#endif /* HAL_MDIOS_MODULE_ENABLED */
+
+#ifdef HAL_SMBUS_MODULE_ENABLED
+ #include "stm32f7xx_hal_smbus.h"
+#endif /* HAL_SMBUS_MODULE_ENABLED */
+
+/* Exported macro ------------------------------------------------------------*/
+#ifdef  USE_FULL_ASSERT
+/**
+  * @brief  The assert_param macro is used for function's parameters check.
+  * @param  expr: If expr is false, it calls assert_failed function
+  *         which reports the name of the source file and the source
+  *         line number of the call that failed.
+  *         If expr is true, it returns no value.
+  * @retval None
+  */
+  #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
+/* Exported functions ------------------------------------------------------- */
+  void assert_failed(uint8_t* file, uint32_t line);
+#else
+  #define assert_param(expr) ((void)0U)
+#endif /* USE_FULL_ASSERT */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F7xx_HAL_CONF_H */
+
--- a/project/Core/Inc/stm32f7xx_it.h
+++ b/project/Core/Inc/stm32f7xx_it.h
@@ -0,0 +1,59 @@
+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file    stm32f7xx_it.h
+  * @brief   This file contains the headers of the interrupt handlers.
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2022 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+ ******************************************************************************
+  */
+/* USER CODE END Header */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F7xx_IT_H
+#define __STM32F7xx_IT_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Private includes ----------------------------------------------------------*/
+/* USER CODE BEGIN Includes */
+
+/* USER CODE END Includes */
+
+/* Exported types ------------------------------------------------------------*/
+/* USER CODE BEGIN ET */
+
+/* USER CODE END ET */
+
+/* Exported constants --------------------------------------------------------*/
+/* USER CODE BEGIN EC */
+
+/* USER CODE END EC */
+
+/* Exported macro ------------------------------------------------------------*/
+/* USER CODE BEGIN EM */
+
+/* USER CODE END EM */
+
+/* Exported functions prototypes ---------------------------------------------*/
+void TIM1_UP_TIM10_IRQHandler(void);
+void ETH_IRQHandler(void);
+/* USER CODE BEGIN EFP */
+
+/* USER CODE END EFP */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F7xx_IT_H */