Added an +/- empty stm32f746 project
Please make sure the versions of the Readme are the same on your system
This commit is contained in:
4014
project/Drivers/STM32F7xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h
Normal file
4014
project/Drivers/STM32F7xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h
Normal file
File diff suppressed because it is too large
Load Diff
275
project/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal.h
Normal file
275
project/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal.h
Normal file
@@ -0,0 +1,275 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f7xx_hal.h
|
||||
* @author MCD Application Team
|
||||
* @brief This file contains all the functions prototypes for the HAL
|
||||
* module driver.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __STM32F7xx_HAL_H
|
||||
#define __STM32F7xx_HAL_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f7xx_hal_conf.h"
|
||||
|
||||
/** @addtogroup STM32F7xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup HAL
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
|
||||
/** @defgroup HAL_Exported_Constants HAL Exported Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup HAL_TICK_FREQ Tick Frequency
|
||||
* @{
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
HAL_TICK_FREQ_10HZ = 100U,
|
||||
HAL_TICK_FREQ_100HZ = 10U,
|
||||
HAL_TICK_FREQ_1KHZ = 1U,
|
||||
HAL_TICK_FREQ_DEFAULT = HAL_TICK_FREQ_1KHZ
|
||||
} HAL_TickFreqTypeDef;
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup SYSCFG_BootMode Boot Mode
|
||||
* @{
|
||||
*/
|
||||
#define SYSCFG_MEM_BOOT_ADD0 ((uint32_t)0x00000000U)
|
||||
#define SYSCFG_MEM_BOOT_ADD1 SYSCFG_MEMRMP_MEM_BOOT
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/** @defgroup HAL_Exported_Macros HAL Exported Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @brief Freeze/Unfreeze Peripherals in Debug mode
|
||||
*/
|
||||
#define __HAL_DBGMCU_FREEZE_TIM2() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM2_STOP))
|
||||
#define __HAL_DBGMCU_FREEZE_TIM3() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM3_STOP))
|
||||
#define __HAL_DBGMCU_FREEZE_TIM4() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM4_STOP))
|
||||
#define __HAL_DBGMCU_FREEZE_TIM5() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM5_STOP))
|
||||
#define __HAL_DBGMCU_FREEZE_TIM6() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM6_STOP))
|
||||
#define __HAL_DBGMCU_FREEZE_TIM7() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM7_STOP))
|
||||
#define __HAL_DBGMCU_FREEZE_TIM12() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM12_STOP))
|
||||
#define __HAL_DBGMCU_FREEZE_TIM13() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM13_STOP))
|
||||
#define __HAL_DBGMCU_FREEZE_TIM14() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM14_STOP))
|
||||
#define __HAL_DBGMCU_FREEZE_LPTIM1() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_LPTIM1_STOP))
|
||||
#define __HAL_DBGMCU_FREEZE_RTC() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_RTC_STOP))
|
||||
#define __HAL_DBGMCU_FREEZE_WWDG() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_WWDG_STOP))
|
||||
#define __HAL_DBGMCU_FREEZE_IWDG() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_IWDG_STOP))
|
||||
#define __HAL_DBGMCU_FREEZE_I2C1_TIMEOUT() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT))
|
||||
#define __HAL_DBGMCU_FREEZE_I2C2_TIMEOUT() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_I2C2_SMBUS_TIMEOUT))
|
||||
#define __HAL_DBGMCU_FREEZE_I2C3_TIMEOUT() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_I2C3_SMBUS_TIMEOUT))
|
||||
#define __HAL_DBGMCU_FREEZE_I2C4_TIMEOUT() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_I2C4_SMBUS_TIMEOUT))
|
||||
#define __HAL_DBGMCU_FREEZE_CAN1() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_CAN1_STOP))
|
||||
#define __HAL_DBGMCU_FREEZE_CAN2() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_CAN2_STOP))
|
||||
#define __HAL_DBGMCU_FREEZE_TIM1() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM1_STOP))
|
||||
#define __HAL_DBGMCU_FREEZE_TIM8() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM8_STOP))
|
||||
#define __HAL_DBGMCU_FREEZE_TIM9() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM9_STOP))
|
||||
#define __HAL_DBGMCU_FREEZE_TIM10() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM10_STOP))
|
||||
#define __HAL_DBGMCU_FREEZE_TIM11() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM11_STOP))
|
||||
|
||||
#define __HAL_DBGMCU_UNFREEZE_TIM2() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM2_STOP))
|
||||
#define __HAL_DBGMCU_UNFREEZE_TIM3() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM3_STOP))
|
||||
#define __HAL_DBGMCU_UNFREEZE_TIM4() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM4_STOP))
|
||||
#define __HAL_DBGMCU_UNFREEZE_TIM5() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM5_STOP))
|
||||
#define __HAL_DBGMCU_UNFREEZE_TIM6() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM6_STOP))
|
||||
#define __HAL_DBGMCU_UNFREEZE_TIM7() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM7_STOP))
|
||||
#define __HAL_DBGMCU_UNFREEZE_TIM12() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM12_STOP))
|
||||
#define __HAL_DBGMCU_UNFREEZE_TIM13() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM13_STOP))
|
||||
#define __HAL_DBGMCU_UNFREEZE_TIM14() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM14_STOP))
|
||||
#define __HAL_DBGMCU_UNFREEZE_LPTIM1() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_LPTIM1_STOP))
|
||||
#define __HAL_DBGMCU_UNFREEZE_RTC() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_RTC_STOP))
|
||||
#define __HAL_DBGMCU_UNFREEZE_WWDG() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_WWDG_STOP))
|
||||
#define __HAL_DBGMCU_UNFREEZE_IWDG() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_IWDG_STOP))
|
||||
#define __HAL_DBGMCU_UNFREEZE_I2C1_TIMEOUT() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT))
|
||||
#define __HAL_DBGMCU_UNFREEZE_I2C2_TIMEOUT() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_I2C2_SMBUS_TIMEOUT))
|
||||
#define __HAL_DBGMCU_UNFREEZE_I2C3_TIMEOUT() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_I2C3_SMBUS_TIMEOUT))
|
||||
#define __HAL_DBGMCU_UNFREEZE_I2C4_TIMEOUT() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_I2C4_SMBUS_TIMEOUT))
|
||||
#define __HAL_DBGMCU_UNFREEZE_CAN1() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_CAN1_STOP))
|
||||
#define __HAL_DBGMCU_UNFREEZE_CAN2() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_CAN2_STOP))
|
||||
#define __HAL_DBGMCU_UNFREEZE_TIM1() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM1_STOP))
|
||||
#define __HAL_DBGMCU_UNFREEZE_TIM8() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM8_STOP))
|
||||
#define __HAL_DBGMCU_UNFREEZE_TIM9() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM9_STOP))
|
||||
#define __HAL_DBGMCU_UNFREEZE_TIM10() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM10_STOP))
|
||||
#define __HAL_DBGMCU_UNFREEZE_TIM11() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM11_STOP))
|
||||
|
||||
|
||||
/** @brief FMC (NOR/RAM) mapped at 0x60000000 and SDRAM mapped at 0xC0000000
|
||||
*/
|
||||
#define __HAL_SYSCFG_REMAPMEMORY_FMC() (SYSCFG->MEMRMP &= ~(SYSCFG_MEMRMP_SWP_FMC))
|
||||
|
||||
|
||||
/** @brief FMC/SDRAM mapped at 0x60000000 (NOR/RAM) mapped at 0xC0000000
|
||||
*/
|
||||
#define __HAL_SYSCFG_REMAPMEMORY_FMC_SDRAM() do {SYSCFG->MEMRMP &= ~(SYSCFG_MEMRMP_SWP_FMC);\
|
||||
SYSCFG->MEMRMP |= (SYSCFG_MEMRMP_SWP_FMC_0);\
|
||||
}while(0);
|
||||
/**
|
||||
* @brief Return the memory boot mapping as configured by user.
|
||||
* @retval The boot mode as configured by user. The returned value can be one
|
||||
* of the following values:
|
||||
* @arg @ref SYSCFG_MEM_BOOT_ADD0
|
||||
* @arg @ref SYSCFG_MEM_BOOT_ADD1
|
||||
*/
|
||||
#define __HAL_SYSCFG_GET_BOOT_MODE() READ_BIT(SYSCFG->MEMRMP, SYSCFG_MEMRMP_MEM_BOOT)
|
||||
|
||||
#if defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
|
||||
/** @brief SYSCFG Break Cortex-M7 Lockup lock.
|
||||
* Enable and lock the connection of Cortex-M7 LOCKUP (Hardfault) output to TIM1/8 Break input.
|
||||
* @note The selected configuration is locked and can be unlocked only by system reset.
|
||||
*/
|
||||
#define __HAL_SYSCFG_BREAK_LOCKUP_LOCK() SET_BIT(SYSCFG->CBR, SYSCFG_CBR_CLL)
|
||||
|
||||
/** @brief SYSCFG Break PVD lock.
|
||||
* Enable and lock the PVD connection to Timer1/8 Break input, as well as the PVDE and PLS[2:0] in the PWR_CR1 register.
|
||||
* @note The selected configuration is locked and can be unlocked only by system reset.
|
||||
*/
|
||||
#define __HAL_SYSCFG_BREAK_PVD_LOCK() SET_BIT(SYSCFG->CBR, SYSCFG_CBR_PVDL)
|
||||
#endif /* STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup HAL_Private_Macros HAL Private Macros
|
||||
* @{
|
||||
*/
|
||||
#define IS_TICKFREQ(FREQ) (((FREQ) == HAL_TICK_FREQ_10HZ) || \
|
||||
((FREQ) == HAL_TICK_FREQ_100HZ) || \
|
||||
((FREQ) == HAL_TICK_FREQ_1KHZ))
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @addtogroup HAL_Exported_Functions
|
||||
* @{
|
||||
*/
|
||||
/** @addtogroup HAL_Exported_Functions_Group1
|
||||
* @{
|
||||
*/
|
||||
/* Initialization and Configuration functions ******************************/
|
||||
HAL_StatusTypeDef HAL_Init(void);
|
||||
HAL_StatusTypeDef HAL_DeInit(void);
|
||||
void HAL_MspInit(void);
|
||||
void HAL_MspDeInit(void);
|
||||
HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported variables ---------------------------------------------------------*/
|
||||
/** @addtogroup HAL_Exported_Variables
|
||||
* @{
|
||||
*/
|
||||
extern __IO uint32_t uwTick;
|
||||
extern uint32_t uwTickPrio;
|
||||
extern HAL_TickFreqTypeDef uwTickFreq;
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup HAL_Exported_Functions_Group2
|
||||
* @{
|
||||
*/
|
||||
/* Peripheral Control functions ************************************************/
|
||||
void HAL_IncTick(void);
|
||||
void HAL_Delay(uint32_t Delay);
|
||||
uint32_t HAL_GetTick(void);
|
||||
uint32_t HAL_GetTickPrio(void);
|
||||
HAL_StatusTypeDef HAL_SetTickFreq(HAL_TickFreqTypeDef Freq);
|
||||
HAL_TickFreqTypeDef HAL_GetTickFreq(void);
|
||||
void HAL_SuspendTick(void);
|
||||
void HAL_ResumeTick(void);
|
||||
uint32_t HAL_GetHalVersion(void);
|
||||
uint32_t HAL_GetREVID(void);
|
||||
uint32_t HAL_GetDEVID(void);
|
||||
uint32_t HAL_GetUIDw0(void);
|
||||
uint32_t HAL_GetUIDw1(void);
|
||||
uint32_t HAL_GetUIDw2(void);
|
||||
void HAL_DBGMCU_EnableDBGSleepMode(void);
|
||||
void HAL_DBGMCU_DisableDBGSleepMode(void);
|
||||
void HAL_DBGMCU_EnableDBGStopMode(void);
|
||||
void HAL_DBGMCU_DisableDBGStopMode(void);
|
||||
void HAL_DBGMCU_EnableDBGStandbyMode(void);
|
||||
void HAL_DBGMCU_DisableDBGStandbyMode(void);
|
||||
void HAL_EnableCompensationCell(void);
|
||||
void HAL_DisableCompensationCell(void);
|
||||
void HAL_EnableFMCMemorySwapping(void);
|
||||
void HAL_DisableFMCMemorySwapping(void);
|
||||
#if defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
|
||||
void HAL_EnableMemorySwappingBank(void);
|
||||
void HAL_DisableMemorySwappingBank(void);
|
||||
#endif /* STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/* Private types -------------------------------------------------------------*/
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
/** @defgroup HAL_Private_Variables HAL Private Variables
|
||||
* @{
|
||||
*/
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/* Private constants ---------------------------------------------------------*/
|
||||
/** @defgroup HAL_Private_Constants HAL Private Constants
|
||||
* @{
|
||||
*/
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/* Private macros ------------------------------------------------------------*/
|
||||
/* Private functions ---------------------------------------------------------*/
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __STM32F7xx_HAL_H */
|
||||
|
||||
|
||||
404
project/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_cortex.h
Normal file
404
project/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_cortex.h
Normal file
@@ -0,0 +1,404 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f7xx_hal_cortex.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of CORTEX HAL module.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file in
|
||||
* the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __STM32F7xx_HAL_CORTEX_H
|
||||
#define __STM32F7xx_HAL_CORTEX_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f7xx_hal_def.h"
|
||||
|
||||
/** @addtogroup STM32F7xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup CORTEX
|
||||
* @{
|
||||
*/
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/** @defgroup CORTEX_Exported_Types Cortex Exported Types
|
||||
* @{
|
||||
*/
|
||||
|
||||
#if (__MPU_PRESENT == 1)
|
||||
/** @defgroup CORTEX_MPU_Region_Initialization_Structure_definition MPU Region Initialization Structure Definition
|
||||
* @brief MPU Region initialization structure
|
||||
* @{
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint8_t Enable; /*!< Specifies the status of the region.
|
||||
This parameter can be a value of @ref CORTEX_MPU_Region_Enable */
|
||||
uint8_t Number; /*!< Specifies the number of the region to protect.
|
||||
This parameter can be a value of @ref CORTEX_MPU_Region_Number */
|
||||
uint32_t BaseAddress; /*!< Specifies the base address of the region to protect. */
|
||||
uint8_t Size; /*!< Specifies the size of the region to protect.
|
||||
This parameter can be a value of @ref CORTEX_MPU_Region_Size */
|
||||
uint8_t SubRegionDisable; /*!< Specifies the number of the subregion protection to disable.
|
||||
This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF */
|
||||
uint8_t TypeExtField; /*!< Specifies the TEX field level.
|
||||
This parameter can be a value of @ref CORTEX_MPU_TEX_Levels */
|
||||
uint8_t AccessPermission; /*!< Specifies the region access permission type.
|
||||
This parameter can be a value of @ref CORTEX_MPU_Region_Permission_Attributes */
|
||||
uint8_t DisableExec; /*!< Specifies the instruction access status.
|
||||
This parameter can be a value of @ref CORTEX_MPU_Instruction_Access */
|
||||
uint8_t IsShareable; /*!< Specifies the shareability status of the protected region.
|
||||
This parameter can be a value of @ref CORTEX_MPU_Access_Shareable */
|
||||
uint8_t IsCacheable; /*!< Specifies the cacheable status of the region protected.
|
||||
This parameter can be a value of @ref CORTEX_MPU_Access_Cacheable */
|
||||
uint8_t IsBufferable; /*!< Specifies the bufferable status of the protected region.
|
||||
This parameter can be a value of @ref CORTEX_MPU_Access_Bufferable */
|
||||
}MPU_Region_InitTypeDef;
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
#endif /* __MPU_PRESENT */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
|
||||
/** @defgroup CORTEX_Exported_Constants CORTEX Exported Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup CORTEX_Preemption_Priority_Group CORTEX Preemption Priority Group
|
||||
* @{
|
||||
*/
|
||||
#define NVIC_PRIORITYGROUP_0 ((uint32_t)0x00000007U) /*!< 0 bits for pre-emption priority
|
||||
4 bits for subpriority */
|
||||
#define NVIC_PRIORITYGROUP_1 ((uint32_t)0x00000006U) /*!< 1 bits for pre-emption priority
|
||||
3 bits for subpriority */
|
||||
#define NVIC_PRIORITYGROUP_2 ((uint32_t)0x00000005U) /*!< 2 bits for pre-emption priority
|
||||
2 bits for subpriority */
|
||||
#define NVIC_PRIORITYGROUP_3 ((uint32_t)0x00000004U) /*!< 3 bits for pre-emption priority
|
||||
1 bits for subpriority */
|
||||
#define NVIC_PRIORITYGROUP_4 ((uint32_t)0x00000003U) /*!< 4 bits for pre-emption priority
|
||||
0 bits for subpriority */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CORTEX_SysTick_clock_source CORTEX _SysTick clock source
|
||||
* @{
|
||||
*/
|
||||
#define SYSTICK_CLKSOURCE_HCLK_DIV8 ((uint32_t)0x00000000U)
|
||||
#define SYSTICK_CLKSOURCE_HCLK ((uint32_t)0x00000004U)
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#if (__MPU_PRESENT == 1)
|
||||
/** @defgroup CORTEX_MPU_HFNMI_PRIVDEF_Control MPU HFNMI and PRIVILEGED Access control
|
||||
* @{
|
||||
*/
|
||||
#define MPU_HFNMI_PRIVDEF_NONE ((uint32_t)0x00000000U)
|
||||
#define MPU_HARDFAULT_NMI ((uint32_t)0x00000002U)
|
||||
#define MPU_PRIVILEGED_DEFAULT ((uint32_t)0x00000004U)
|
||||
#define MPU_HFNMI_PRIVDEF ((uint32_t)0x00000006U)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CORTEX_MPU_Region_Enable CORTEX MPU Region Enable
|
||||
* @{
|
||||
*/
|
||||
#define MPU_REGION_ENABLE ((uint8_t)0x01U)
|
||||
#define MPU_REGION_DISABLE ((uint8_t)0x00U)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CORTEX_MPU_Instruction_Access CORTEX MPU Instruction Access
|
||||
* @{
|
||||
*/
|
||||
#define MPU_INSTRUCTION_ACCESS_ENABLE ((uint8_t)0x00U)
|
||||
#define MPU_INSTRUCTION_ACCESS_DISABLE ((uint8_t)0x01U)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CORTEX_MPU_Access_Shareable CORTEX MPU Instruction Access Shareable
|
||||
* @{
|
||||
*/
|
||||
#define MPU_ACCESS_SHAREABLE ((uint8_t)0x01U)
|
||||
#define MPU_ACCESS_NOT_SHAREABLE ((uint8_t)0x00U)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CORTEX_MPU_Access_Cacheable CORTEX MPU Instruction Access Cacheable
|
||||
* @{
|
||||
*/
|
||||
#define MPU_ACCESS_CACHEABLE ((uint8_t)0x01U)
|
||||
#define MPU_ACCESS_NOT_CACHEABLE ((uint8_t)0x00U)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CORTEX_MPU_Access_Bufferable CORTEX MPU Instruction Access Bufferable
|
||||
* @{
|
||||
*/
|
||||
#define MPU_ACCESS_BUFFERABLE ((uint8_t)0x01U)
|
||||
#define MPU_ACCESS_NOT_BUFFERABLE ((uint8_t)0x00U)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CORTEX_MPU_TEX_Levels MPU TEX Levels
|
||||
* @{
|
||||
*/
|
||||
#define MPU_TEX_LEVEL0 ((uint8_t)0x00U)
|
||||
#define MPU_TEX_LEVEL1 ((uint8_t)0x01U)
|
||||
#define MPU_TEX_LEVEL2 ((uint8_t)0x02U)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CORTEX_MPU_Region_Size CORTEX MPU Region Size
|
||||
* @{
|
||||
*/
|
||||
#define MPU_REGION_SIZE_32B ((uint8_t)0x04U)
|
||||
#define MPU_REGION_SIZE_64B ((uint8_t)0x05U)
|
||||
#define MPU_REGION_SIZE_128B ((uint8_t)0x06U)
|
||||
#define MPU_REGION_SIZE_256B ((uint8_t)0x07U)
|
||||
#define MPU_REGION_SIZE_512B ((uint8_t)0x08U)
|
||||
#define MPU_REGION_SIZE_1KB ((uint8_t)0x09U)
|
||||
#define MPU_REGION_SIZE_2KB ((uint8_t)0x0AU)
|
||||
#define MPU_REGION_SIZE_4KB ((uint8_t)0x0BU)
|
||||
#define MPU_REGION_SIZE_8KB ((uint8_t)0x0CU)
|
||||
#define MPU_REGION_SIZE_16KB ((uint8_t)0x0DU)
|
||||
#define MPU_REGION_SIZE_32KB ((uint8_t)0x0EU)
|
||||
#define MPU_REGION_SIZE_64KB ((uint8_t)0x0FU)
|
||||
#define MPU_REGION_SIZE_128KB ((uint8_t)0x10U)
|
||||
#define MPU_REGION_SIZE_256KB ((uint8_t)0x11U)
|
||||
#define MPU_REGION_SIZE_512KB ((uint8_t)0x12U)
|
||||
#define MPU_REGION_SIZE_1MB ((uint8_t)0x13U)
|
||||
#define MPU_REGION_SIZE_2MB ((uint8_t)0x14U)
|
||||
#define MPU_REGION_SIZE_4MB ((uint8_t)0x15U)
|
||||
#define MPU_REGION_SIZE_8MB ((uint8_t)0x16U)
|
||||
#define MPU_REGION_SIZE_16MB ((uint8_t)0x17U)
|
||||
#define MPU_REGION_SIZE_32MB ((uint8_t)0x18U)
|
||||
#define MPU_REGION_SIZE_64MB ((uint8_t)0x19U)
|
||||
#define MPU_REGION_SIZE_128MB ((uint8_t)0x1AU)
|
||||
#define MPU_REGION_SIZE_256MB ((uint8_t)0x1BU)
|
||||
#define MPU_REGION_SIZE_512MB ((uint8_t)0x1CU)
|
||||
#define MPU_REGION_SIZE_1GB ((uint8_t)0x1DU)
|
||||
#define MPU_REGION_SIZE_2GB ((uint8_t)0x1EU)
|
||||
#define MPU_REGION_SIZE_4GB ((uint8_t)0x1FU)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CORTEX_MPU_Region_Permission_Attributes CORTEX MPU Region Permission Attributes
|
||||
* @{
|
||||
*/
|
||||
#define MPU_REGION_NO_ACCESS ((uint8_t)0x00U)
|
||||
#define MPU_REGION_PRIV_RW ((uint8_t)0x01U)
|
||||
#define MPU_REGION_PRIV_RW_URO ((uint8_t)0x02U)
|
||||
#define MPU_REGION_FULL_ACCESS ((uint8_t)0x03U)
|
||||
#define MPU_REGION_PRIV_RO ((uint8_t)0x05U)
|
||||
#define MPU_REGION_PRIV_RO_URO ((uint8_t)0x06U)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CORTEX_MPU_Region_Number CORTEX MPU Region Number
|
||||
* @{
|
||||
*/
|
||||
#define MPU_REGION_NUMBER0 ((uint8_t)0x00U)
|
||||
#define MPU_REGION_NUMBER1 ((uint8_t)0x01U)
|
||||
#define MPU_REGION_NUMBER2 ((uint8_t)0x02U)
|
||||
#define MPU_REGION_NUMBER3 ((uint8_t)0x03U)
|
||||
#define MPU_REGION_NUMBER4 ((uint8_t)0x04U)
|
||||
#define MPU_REGION_NUMBER5 ((uint8_t)0x05U)
|
||||
#define MPU_REGION_NUMBER6 ((uint8_t)0x06U)
|
||||
#define MPU_REGION_NUMBER7 ((uint8_t)0x07U)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
#endif /* __MPU_PRESENT */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
|
||||
/* Exported Macros -----------------------------------------------------------*/
|
||||
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @addtogroup CORTEX_Exported_Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup CORTEX_Exported_Functions_Group1
|
||||
* @{
|
||||
*/
|
||||
/* Initialization and de-initialization functions *****************************/
|
||||
void HAL_NVIC_SetPriorityGrouping(uint32_t PriorityGroup);
|
||||
void HAL_NVIC_SetPriority(IRQn_Type IRQn, uint32_t PreemptPriority, uint32_t SubPriority);
|
||||
void HAL_NVIC_EnableIRQ(IRQn_Type IRQn);
|
||||
void HAL_NVIC_DisableIRQ(IRQn_Type IRQn);
|
||||
void HAL_NVIC_SystemReset(void);
|
||||
uint32_t HAL_SYSTICK_Config(uint32_t TicksNumb);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup CORTEX_Exported_Functions_Group2
|
||||
* @{
|
||||
*/
|
||||
/* Peripheral Control functions ***********************************************/
|
||||
#if (__MPU_PRESENT == 1)
|
||||
void HAL_MPU_Enable(uint32_t MPU_Control);
|
||||
void HAL_MPU_Disable(void);
|
||||
void HAL_MPU_ConfigRegion(MPU_Region_InitTypeDef *MPU_Init);
|
||||
#endif /* __MPU_PRESENT */
|
||||
uint32_t HAL_NVIC_GetPriorityGrouping(void);
|
||||
void HAL_NVIC_GetPriority(IRQn_Type IRQn, uint32_t PriorityGroup, uint32_t* pPreemptPriority, uint32_t* pSubPriority);
|
||||
uint32_t HAL_NVIC_GetPendingIRQ(IRQn_Type IRQn);
|
||||
void HAL_NVIC_SetPendingIRQ(IRQn_Type IRQn);
|
||||
void HAL_NVIC_ClearPendingIRQ(IRQn_Type IRQn);
|
||||
uint32_t HAL_NVIC_GetActive(IRQn_Type IRQn);
|
||||
void HAL_SYSTICK_CLKSourceConfig(uint32_t CLKSource);
|
||||
void HAL_SYSTICK_IRQHandler(void);
|
||||
void HAL_SYSTICK_Callback(void);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private types -------------------------------------------------------------*/
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
/* Private constants ---------------------------------------------------------*/
|
||||
/* Private macros ------------------------------------------------------------*/
|
||||
/** @defgroup CORTEX_Private_Macros CORTEX Private Macros
|
||||
* @{
|
||||
*/
|
||||
#define IS_NVIC_PRIORITY_GROUP(GROUP) (((GROUP) == NVIC_PRIORITYGROUP_0) || \
|
||||
((GROUP) == NVIC_PRIORITYGROUP_1) || \
|
||||
((GROUP) == NVIC_PRIORITYGROUP_2) || \
|
||||
((GROUP) == NVIC_PRIORITYGROUP_3) || \
|
||||
((GROUP) == NVIC_PRIORITYGROUP_4))
|
||||
|
||||
#define IS_NVIC_PREEMPTION_PRIORITY(PRIORITY) ((PRIORITY) < 0x10U)
|
||||
|
||||
#define IS_NVIC_SUB_PRIORITY(PRIORITY) ((PRIORITY) < 0x10U)
|
||||
|
||||
#define IS_NVIC_DEVICE_IRQ(IRQ) ((IRQ) >= 0x00)
|
||||
|
||||
#define IS_SYSTICK_CLK_SOURCE(SOURCE) (((SOURCE) == SYSTICK_CLKSOURCE_HCLK) || \
|
||||
((SOURCE) == SYSTICK_CLKSOURCE_HCLK_DIV8))
|
||||
|
||||
#if (__MPU_PRESENT == 1)
|
||||
#define IS_MPU_REGION_ENABLE(STATE) (((STATE) == MPU_REGION_ENABLE) || \
|
||||
((STATE) == MPU_REGION_DISABLE))
|
||||
|
||||
#define IS_MPU_INSTRUCTION_ACCESS(STATE) (((STATE) == MPU_INSTRUCTION_ACCESS_ENABLE) || \
|
||||
((STATE) == MPU_INSTRUCTION_ACCESS_DISABLE))
|
||||
|
||||
#define IS_MPU_ACCESS_SHAREABLE(STATE) (((STATE) == MPU_ACCESS_SHAREABLE) || \
|
||||
((STATE) == MPU_ACCESS_NOT_SHAREABLE))
|
||||
|
||||
#define IS_MPU_ACCESS_CACHEABLE(STATE) (((STATE) == MPU_ACCESS_CACHEABLE) || \
|
||||
((STATE) == MPU_ACCESS_NOT_CACHEABLE))
|
||||
|
||||
#define IS_MPU_ACCESS_BUFFERABLE(STATE) (((STATE) == MPU_ACCESS_BUFFERABLE) || \
|
||||
((STATE) == MPU_ACCESS_NOT_BUFFERABLE))
|
||||
|
||||
#define IS_MPU_TEX_LEVEL(TYPE) (((TYPE) == MPU_TEX_LEVEL0) || \
|
||||
((TYPE) == MPU_TEX_LEVEL1) || \
|
||||
((TYPE) == MPU_TEX_LEVEL2))
|
||||
|
||||
#define IS_MPU_REGION_PERMISSION_ATTRIBUTE(TYPE) (((TYPE) == MPU_REGION_NO_ACCESS) || \
|
||||
((TYPE) == MPU_REGION_PRIV_RW) || \
|
||||
((TYPE) == MPU_REGION_PRIV_RW_URO) || \
|
||||
((TYPE) == MPU_REGION_FULL_ACCESS) || \
|
||||
((TYPE) == MPU_REGION_PRIV_RO) || \
|
||||
((TYPE) == MPU_REGION_PRIV_RO_URO))
|
||||
|
||||
#define IS_MPU_REGION_NUMBER(NUMBER) (((NUMBER) == MPU_REGION_NUMBER0) || \
|
||||
((NUMBER) == MPU_REGION_NUMBER1) || \
|
||||
((NUMBER) == MPU_REGION_NUMBER2) || \
|
||||
((NUMBER) == MPU_REGION_NUMBER3) || \
|
||||
((NUMBER) == MPU_REGION_NUMBER4) || \
|
||||
((NUMBER) == MPU_REGION_NUMBER5) || \
|
||||
((NUMBER) == MPU_REGION_NUMBER6) || \
|
||||
((NUMBER) == MPU_REGION_NUMBER7))
|
||||
|
||||
#define IS_MPU_REGION_SIZE(SIZE) (((SIZE) == MPU_REGION_SIZE_32B) || \
|
||||
((SIZE) == MPU_REGION_SIZE_64B) || \
|
||||
((SIZE) == MPU_REGION_SIZE_128B) || \
|
||||
((SIZE) == MPU_REGION_SIZE_256B) || \
|
||||
((SIZE) == MPU_REGION_SIZE_512B) || \
|
||||
((SIZE) == MPU_REGION_SIZE_1KB) || \
|
||||
((SIZE) == MPU_REGION_SIZE_2KB) || \
|
||||
((SIZE) == MPU_REGION_SIZE_4KB) || \
|
||||
((SIZE) == MPU_REGION_SIZE_8KB) || \
|
||||
((SIZE) == MPU_REGION_SIZE_16KB) || \
|
||||
((SIZE) == MPU_REGION_SIZE_32KB) || \
|
||||
((SIZE) == MPU_REGION_SIZE_64KB) || \
|
||||
((SIZE) == MPU_REGION_SIZE_128KB) || \
|
||||
((SIZE) == MPU_REGION_SIZE_256KB) || \
|
||||
((SIZE) == MPU_REGION_SIZE_512KB) || \
|
||||
((SIZE) == MPU_REGION_SIZE_1MB) || \
|
||||
((SIZE) == MPU_REGION_SIZE_2MB) || \
|
||||
((SIZE) == MPU_REGION_SIZE_4MB) || \
|
||||
((SIZE) == MPU_REGION_SIZE_8MB) || \
|
||||
((SIZE) == MPU_REGION_SIZE_16MB) || \
|
||||
((SIZE) == MPU_REGION_SIZE_32MB) || \
|
||||
((SIZE) == MPU_REGION_SIZE_64MB) || \
|
||||
((SIZE) == MPU_REGION_SIZE_128MB) || \
|
||||
((SIZE) == MPU_REGION_SIZE_256MB) || \
|
||||
((SIZE) == MPU_REGION_SIZE_512MB) || \
|
||||
((SIZE) == MPU_REGION_SIZE_1GB) || \
|
||||
((SIZE) == MPU_REGION_SIZE_2GB) || \
|
||||
((SIZE) == MPU_REGION_SIZE_4GB))
|
||||
|
||||
#define IS_MPU_SUB_REGION_DISABLE(SUBREGION) ((SUBREGION) < (uint16_t)0x00FFU)
|
||||
#endif /* __MPU_PRESENT */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __STM32F7xx_HAL_CORTEX_H */
|
||||
|
||||
|
||||
218
project/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_def.h
Normal file
218
project/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_def.h
Normal file
@@ -0,0 +1,218 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f7xx_hal_def.h
|
||||
* @author MCD Application Team
|
||||
* @brief This file contains HAL common defines, enumeration, macros and
|
||||
* structures definitions.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __STM32F7xx_HAL_DEF
|
||||
#define __STM32F7xx_HAL_DEF
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f7xx.h"
|
||||
#include "Legacy/stm32_hal_legacy.h"
|
||||
#include <stddef.h>
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
|
||||
/**
|
||||
* @brief HAL Status structures definition
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
HAL_OK = 0x00U,
|
||||
HAL_ERROR = 0x01U,
|
||||
HAL_BUSY = 0x02U,
|
||||
HAL_TIMEOUT = 0x03U
|
||||
} HAL_StatusTypeDef;
|
||||
|
||||
/**
|
||||
* @brief HAL Lock structures definition
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
HAL_UNLOCKED = 0x00U,
|
||||
HAL_LOCKED = 0x01U
|
||||
} HAL_LockTypeDef;
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
|
||||
#define UNUSED(X) (void)X /* To avoid gcc/g++ warnings */
|
||||
|
||||
#define HAL_MAX_DELAY 0xFFFFFFFFU
|
||||
|
||||
#define HAL_IS_BIT_SET(REG, BIT) (((REG) & (BIT)) == (BIT))
|
||||
#define HAL_IS_BIT_CLR(REG, BIT) (((REG) & (BIT)) == 0U)
|
||||
|
||||
#define __HAL_LINKDMA(__HANDLE__, __PPP_DMA_FIELD__, __DMA_HANDLE__) \
|
||||
do{ \
|
||||
(__HANDLE__)->__PPP_DMA_FIELD__ = &(__DMA_HANDLE__); \
|
||||
(__DMA_HANDLE__).Parent = (__HANDLE__); \
|
||||
} while(0)
|
||||
|
||||
/** @brief Reset the Handle's State field.
|
||||
* @param __HANDLE__ specifies the Peripheral Handle.
|
||||
* @note This macro can be used for the following purpose:
|
||||
* - When the Handle is declared as local variable; before passing it as parameter
|
||||
* to HAL_PPP_Init() for the first time, it is mandatory to use this macro
|
||||
* to set to 0 the Handle's "State" field.
|
||||
* Otherwise, "State" field may have any random value and the first time the function
|
||||
* HAL_PPP_Init() is called, the low level hardware initialization will be missed
|
||||
* (i.e. HAL_PPP_MspInit() will not be executed).
|
||||
* - When there is a need to reconfigure the low level hardware: instead of calling
|
||||
* HAL_PPP_DeInit() then HAL_PPP_Init(), user can make a call to this macro then HAL_PPP_Init().
|
||||
* In this later function, when the Handle's "State" field is set to 0, it will execute the function
|
||||
* HAL_PPP_MspInit() which will reconfigure the low level hardware.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = 0U)
|
||||
|
||||
#if (USE_RTOS == 1U)
|
||||
/* Reserved for future use */
|
||||
#error "USE_RTOS should be 0 in the current HAL release"
|
||||
#else
|
||||
#define __HAL_LOCK(__HANDLE__) \
|
||||
do{ \
|
||||
if((__HANDLE__)->Lock == HAL_LOCKED) \
|
||||
{ \
|
||||
return HAL_BUSY; \
|
||||
} \
|
||||
else \
|
||||
{ \
|
||||
(__HANDLE__)->Lock = HAL_LOCKED; \
|
||||
} \
|
||||
}while (0U)
|
||||
|
||||
#define __HAL_UNLOCK(__HANDLE__) \
|
||||
do{ \
|
||||
(__HANDLE__)->Lock = HAL_UNLOCKED; \
|
||||
}while (0U)
|
||||
#endif /* USE_RTOS */
|
||||
|
||||
#if defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) /* ARM Compiler V6 */
|
||||
#ifndef __weak
|
||||
#define __weak __attribute__((weak))
|
||||
#endif
|
||||
#ifndef __packed
|
||||
#define __packed __attribute__((packed))
|
||||
#endif
|
||||
#elif defined ( __GNUC__ ) && !defined (__CC_ARM) /* GNU Compiler */
|
||||
#ifndef __weak
|
||||
#define __weak __attribute__((weak))
|
||||
#endif /* __weak */
|
||||
#ifndef __packed
|
||||
#define __packed __attribute__((__packed__))
|
||||
#endif /* __packed */
|
||||
#endif /* __GNUC__ */
|
||||
|
||||
|
||||
/* Macro to get variable aligned on 4-bytes, for __ICCARM__ the directive "#pragma data_alignment=4" must be used instead */
|
||||
#if defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) /* ARM Compiler V6 */
|
||||
#ifndef __ALIGN_BEGIN
|
||||
#define __ALIGN_BEGIN
|
||||
#endif
|
||||
#ifndef __ALIGN_END
|
||||
#define __ALIGN_END __attribute__ ((aligned (4)))
|
||||
#endif
|
||||
#elif defined ( __GNUC__ ) && !defined (__CC_ARM) /* GNU Compiler */
|
||||
#ifndef __ALIGN_END
|
||||
#define __ALIGN_END __attribute__ ((aligned (4)))
|
||||
#endif /* __ALIGN_END */
|
||||
#ifndef __ALIGN_BEGIN
|
||||
#define __ALIGN_BEGIN
|
||||
#endif /* __ALIGN_BEGIN */
|
||||
#else
|
||||
#ifndef __ALIGN_END
|
||||
#define __ALIGN_END
|
||||
#endif /* __ALIGN_END */
|
||||
#ifndef __ALIGN_BEGIN
|
||||
#if defined (__CC_ARM) /* ARM Compiler V5*/
|
||||
#define __ALIGN_BEGIN __align(4)
|
||||
#elif defined (__ICCARM__) /* IAR Compiler */
|
||||
#define __ALIGN_BEGIN
|
||||
#endif /* __CC_ARM */
|
||||
#endif /* __ALIGN_BEGIN */
|
||||
#endif /* __GNUC__ */
|
||||
|
||||
/* Macro to get variable aligned on 32-bytes,needed for cache maintenance purpose */
|
||||
#if defined (__GNUC__) /* GNU Compiler */
|
||||
#define ALIGN_32BYTES(buf) buf __attribute__ ((aligned (32)))
|
||||
#elif defined (__ICCARM__) /* IAR Compiler */
|
||||
#define ALIGN_32BYTES(buf) _Pragma("data_alignment=32") buf
|
||||
#elif defined (__CC_ARM) /* ARM Compiler */
|
||||
#define ALIGN_32BYTES(buf) __align(32) buf
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief __RAM_FUNC definition
|
||||
*/
|
||||
#if defined ( __CC_ARM ) || (defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050))
|
||||
/* ARM Compiler V4/V5 and V6
|
||||
--------------------------
|
||||
RAM functions are defined using the toolchain options.
|
||||
Functions that are executed in RAM should reside in a separate source module.
|
||||
Using the 'Options for File' dialog you can simply change the 'Code / Const'
|
||||
area of a module to a memory space in physical RAM.
|
||||
Available memory areas are declared in the 'Target' tab of the 'Options for Target'
|
||||
dialog.
|
||||
*/
|
||||
#define __RAM_FUNC
|
||||
|
||||
#elif defined ( __ICCARM__ )
|
||||
/* ICCARM Compiler
|
||||
---------------
|
||||
RAM functions are defined using a specific toolchain keyword "__ramfunc".
|
||||
*/
|
||||
#define __RAM_FUNC __ramfunc
|
||||
|
||||
#elif defined ( __GNUC__ )
|
||||
/* GNU Compiler
|
||||
------------
|
||||
RAM functions are defined using a specific toolchain attribute
|
||||
"__attribute__((section(".RamFunc")))".
|
||||
*/
|
||||
#define __RAM_FUNC __attribute__((section(".RamFunc")))
|
||||
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief __NOINLINE definition
|
||||
*/
|
||||
#if defined ( __CC_ARM ) || (defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)) || defined ( __GNUC__ )
|
||||
/* ARM V4/V5 and V6 & GNU Compiler
|
||||
-------------------------------
|
||||
*/
|
||||
#define __NOINLINE __attribute__ ( (noinline) )
|
||||
|
||||
#elif defined ( __ICCARM__ )
|
||||
/* ICCARM Compiler
|
||||
---------------
|
||||
*/
|
||||
#define __NOINLINE _Pragma("optimize = no_inline")
|
||||
|
||||
#endif
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* ___STM32F7xx_HAL_DEF */
|
||||
|
||||
|
||||
747
project/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_dma.h
Normal file
747
project/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_dma.h
Normal file
@@ -0,0 +1,747 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f7xx_hal_dma.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of DMA HAL module.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file in
|
||||
* the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __STM32F7xx_HAL_DMA_H
|
||||
#define __STM32F7xx_HAL_DMA_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f7xx_hal_def.h"
|
||||
|
||||
/** @addtogroup STM32F7xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup DMA
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
|
||||
/** @defgroup DMA_Exported_Types DMA Exported Types
|
||||
* @brief DMA Exported Types
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief DMA Configuration Structure definition
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint32_t Channel; /*!< Specifies the channel used for the specified stream.
|
||||
This parameter can be a value of @ref DMAEx_Channel_selection */
|
||||
|
||||
uint32_t Direction; /*!< Specifies if the data will be transferred from memory to peripheral,
|
||||
from memory to memory or from peripheral to memory.
|
||||
This parameter can be a value of @ref DMA_Data_transfer_direction */
|
||||
|
||||
uint32_t PeriphInc; /*!< Specifies whether the Peripheral address register should be incremented or not.
|
||||
This parameter can be a value of @ref DMA_Peripheral_incremented_mode */
|
||||
|
||||
uint32_t MemInc; /*!< Specifies whether the memory address register should be incremented or not.
|
||||
This parameter can be a value of @ref DMA_Memory_incremented_mode */
|
||||
|
||||
uint32_t PeriphDataAlignment; /*!< Specifies the Peripheral data width.
|
||||
This parameter can be a value of @ref DMA_Peripheral_data_size */
|
||||
|
||||
uint32_t MemDataAlignment; /*!< Specifies the Memory data width.
|
||||
This parameter can be a value of @ref DMA_Memory_data_size */
|
||||
|
||||
uint32_t Mode; /*!< Specifies the operation mode of the DMAy Streamx.
|
||||
This parameter can be a value of @ref DMA_mode
|
||||
@note The circular buffer mode cannot be used if the memory-to-memory
|
||||
data transfer is configured on the selected Stream */
|
||||
|
||||
uint32_t Priority; /*!< Specifies the software priority for the DMAy Streamx.
|
||||
This parameter can be a value of @ref DMA_Priority_level */
|
||||
|
||||
uint32_t FIFOMode; /*!< Specifies if the FIFO mode or Direct mode will be used for the specified stream.
|
||||
This parameter can be a value of @ref DMA_FIFO_direct_mode
|
||||
@note The Direct mode (FIFO mode disabled) cannot be used if the
|
||||
memory-to-memory data transfer is configured on the selected stream */
|
||||
|
||||
uint32_t FIFOThreshold; /*!< Specifies the FIFO threshold level.
|
||||
This parameter can be a value of @ref DMA_FIFO_threshold_level */
|
||||
|
||||
uint32_t MemBurst; /*!< Specifies the Burst transfer configuration for the memory transfers.
|
||||
It specifies the amount of data to be transferred in a single non interruptible
|
||||
transaction.
|
||||
This parameter can be a value of @ref DMA_Memory_burst
|
||||
@note The burst mode is possible only if the address Increment mode is enabled. */
|
||||
|
||||
uint32_t PeriphBurst; /*!< Specifies the Burst transfer configuration for the peripheral transfers.
|
||||
It specifies the amount of data to be transferred in a single non interruptible
|
||||
transaction.
|
||||
This parameter can be a value of @ref DMA_Peripheral_burst
|
||||
@note The burst mode is possible only if the address Increment mode is enabled. */
|
||||
}DMA_InitTypeDef;
|
||||
|
||||
/**
|
||||
* @brief HAL DMA State structures definition
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
HAL_DMA_STATE_RESET = 0x00U, /*!< DMA not yet initialized or disabled */
|
||||
HAL_DMA_STATE_READY = 0x01U, /*!< DMA initialized and ready for use */
|
||||
HAL_DMA_STATE_BUSY = 0x02U, /*!< DMA process is ongoing */
|
||||
HAL_DMA_STATE_TIMEOUT = 0x03U, /*!< DMA timeout state */
|
||||
HAL_DMA_STATE_ERROR = 0x04U, /*!< DMA error state */
|
||||
HAL_DMA_STATE_ABORT = 0x05U, /*!< DMA Abort state */
|
||||
}HAL_DMA_StateTypeDef;
|
||||
|
||||
/**
|
||||
* @brief HAL DMA Error Code structure definition
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
HAL_DMA_FULL_TRANSFER = 0x00U, /*!< Full transfer */
|
||||
HAL_DMA_HALF_TRANSFER = 0x01U, /*!< Half Transfer */
|
||||
}HAL_DMA_LevelCompleteTypeDef;
|
||||
|
||||
/**
|
||||
* @brief HAL DMA Error Code structure definition
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
HAL_DMA_XFER_CPLT_CB_ID = 0x00U, /*!< Full transfer */
|
||||
HAL_DMA_XFER_HALFCPLT_CB_ID = 0x01U, /*!< Half Transfer */
|
||||
HAL_DMA_XFER_M1CPLT_CB_ID = 0x02U, /*!< M1 Full Transfer */
|
||||
HAL_DMA_XFER_M1HALFCPLT_CB_ID = 0x03U, /*!< M1 Half Transfer */
|
||||
HAL_DMA_XFER_ERROR_CB_ID = 0x04U, /*!< Error */
|
||||
HAL_DMA_XFER_ABORT_CB_ID = 0x05U, /*!< Abort */
|
||||
HAL_DMA_XFER_ALL_CB_ID = 0x06U /*!< All */
|
||||
}HAL_DMA_CallbackIDTypeDef;
|
||||
|
||||
/**
|
||||
* @brief DMA handle Structure definition
|
||||
*/
|
||||
typedef struct __DMA_HandleTypeDef
|
||||
{
|
||||
DMA_Stream_TypeDef *Instance; /*!< Register base address */
|
||||
|
||||
DMA_InitTypeDef Init; /*!< DMA communication parameters */
|
||||
|
||||
HAL_LockTypeDef Lock; /*!< DMA locking object */
|
||||
|
||||
__IO HAL_DMA_StateTypeDef State; /*!< DMA transfer state */
|
||||
|
||||
void *Parent; /*!< Parent object state */
|
||||
|
||||
void (* XferCpltCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer complete callback */
|
||||
|
||||
void (* XferHalfCpltCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA Half transfer complete callback */
|
||||
|
||||
void (* XferM1CpltCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer complete Memory1 callback */
|
||||
|
||||
void (* XferM1HalfCpltCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer Half complete Memory1 callback */
|
||||
|
||||
void (* XferErrorCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer error callback */
|
||||
|
||||
void (* XferAbortCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer Abort callback */
|
||||
|
||||
__IO uint32_t ErrorCode; /*!< DMA Error code */
|
||||
|
||||
uint32_t StreamBaseAddress; /*!< DMA Stream Base Address */
|
||||
|
||||
uint32_t StreamIndex; /*!< DMA Stream Index */
|
||||
|
||||
}DMA_HandleTypeDef;
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
|
||||
/** @defgroup DMA_Exported_Constants DMA Exported Constants
|
||||
* @brief DMA Exported constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup DMA_Error_Code DMA Error Code
|
||||
* @brief DMA Error Code
|
||||
* @{
|
||||
*/
|
||||
#define HAL_DMA_ERROR_NONE 0x00000000U /*!< No error */
|
||||
#define HAL_DMA_ERROR_TE 0x00000001U /*!< Transfer error */
|
||||
#define HAL_DMA_ERROR_FE 0x00000002U /*!< FIFO error */
|
||||
#define HAL_DMA_ERROR_DME 0x00000004U /*!< Direct Mode error */
|
||||
#define HAL_DMA_ERROR_TIMEOUT 0x00000020U /*!< Timeout error */
|
||||
#define HAL_DMA_ERROR_PARAM 0x00000040U /*!< Parameter error */
|
||||
#define HAL_DMA_ERROR_NO_XFER 0x00000080U /*!< Abort requested with no Xfer ongoing */
|
||||
#define HAL_DMA_ERROR_NOT_SUPPORTED 0x00000100U /*!< Not supported mode */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup DMA_Data_transfer_direction DMA Data transfer direction
|
||||
* @brief DMA data transfer direction
|
||||
* @{
|
||||
*/
|
||||
#define DMA_PERIPH_TO_MEMORY 0x00000000U /*!< Peripheral to memory direction */
|
||||
#define DMA_MEMORY_TO_PERIPH DMA_SxCR_DIR_0 /*!< Memory to peripheral direction */
|
||||
#define DMA_MEMORY_TO_MEMORY DMA_SxCR_DIR_1 /*!< Memory to memory direction */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup DMA_Peripheral_incremented_mode DMA Peripheral incremented mode
|
||||
* @brief DMA peripheral incremented mode
|
||||
* @{
|
||||
*/
|
||||
#define DMA_PINC_ENABLE DMA_SxCR_PINC /*!< Peripheral increment mode enable */
|
||||
#define DMA_PINC_DISABLE 0x00000000U /*!< Peripheral increment mode disable */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup DMA_Memory_incremented_mode DMA Memory incremented mode
|
||||
* @brief DMA memory incremented mode
|
||||
* @{
|
||||
*/
|
||||
#define DMA_MINC_ENABLE DMA_SxCR_MINC /*!< Memory increment mode enable */
|
||||
#define DMA_MINC_DISABLE 0x00000000U /*!< Memory increment mode disable */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup DMA_Peripheral_data_size DMA Peripheral data size
|
||||
* @brief DMA peripheral data size
|
||||
* @{
|
||||
*/
|
||||
#define DMA_PDATAALIGN_BYTE 0x00000000U /*!< Peripheral data alignment: Byte */
|
||||
#define DMA_PDATAALIGN_HALFWORD DMA_SxCR_PSIZE_0 /*!< Peripheral data alignment: HalfWord */
|
||||
#define DMA_PDATAALIGN_WORD DMA_SxCR_PSIZE_1 /*!< Peripheral data alignment: Word */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup DMA_Memory_data_size DMA Memory data size
|
||||
* @brief DMA memory data size
|
||||
* @{
|
||||
*/
|
||||
#define DMA_MDATAALIGN_BYTE 0x00000000U /*!< Memory data alignment: Byte */
|
||||
#define DMA_MDATAALIGN_HALFWORD DMA_SxCR_MSIZE_0 /*!< Memory data alignment: HalfWord */
|
||||
#define DMA_MDATAALIGN_WORD DMA_SxCR_MSIZE_1 /*!< Memory data alignment: Word */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup DMA_mode DMA mode
|
||||
* @brief DMA mode
|
||||
* @{
|
||||
*/
|
||||
#define DMA_NORMAL 0x00000000U /*!< Normal mode */
|
||||
#define DMA_CIRCULAR DMA_SxCR_CIRC /*!< Circular mode */
|
||||
#define DMA_PFCTRL DMA_SxCR_PFCTRL /*!< Peripheral flow control mode */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup DMA_Priority_level DMA Priority level
|
||||
* @brief DMA priority levels
|
||||
* @{
|
||||
*/
|
||||
#define DMA_PRIORITY_LOW 0x00000000U /*!< Priority level: Low */
|
||||
#define DMA_PRIORITY_MEDIUM DMA_SxCR_PL_0 /*!< Priority level: Medium */
|
||||
#define DMA_PRIORITY_HIGH DMA_SxCR_PL_1 /*!< Priority level: High */
|
||||
#define DMA_PRIORITY_VERY_HIGH DMA_SxCR_PL /*!< Priority level: Very High */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup DMA_FIFO_direct_mode DMA FIFO direct mode
|
||||
* @brief DMA FIFO direct mode
|
||||
* @{
|
||||
*/
|
||||
#define DMA_FIFOMODE_DISABLE 0x00000000U /*!< FIFO mode disable */
|
||||
#define DMA_FIFOMODE_ENABLE DMA_SxFCR_DMDIS /*!< FIFO mode enable */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup DMA_FIFO_threshold_level DMA FIFO threshold level
|
||||
* @brief DMA FIFO level
|
||||
* @{
|
||||
*/
|
||||
#define DMA_FIFO_THRESHOLD_1QUARTERFULL 0x00000000U /*!< FIFO threshold 1 quart full configuration */
|
||||
#define DMA_FIFO_THRESHOLD_HALFFULL DMA_SxFCR_FTH_0 /*!< FIFO threshold half full configuration */
|
||||
#define DMA_FIFO_THRESHOLD_3QUARTERSFULL DMA_SxFCR_FTH_1 /*!< FIFO threshold 3 quarts full configuration */
|
||||
#define DMA_FIFO_THRESHOLD_FULL DMA_SxFCR_FTH /*!< FIFO threshold full configuration */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup DMA_Memory_burst DMA Memory burst
|
||||
* @brief DMA memory burst
|
||||
* @{
|
||||
*/
|
||||
#define DMA_MBURST_SINGLE 0x00000000U
|
||||
#define DMA_MBURST_INC4 DMA_SxCR_MBURST_0
|
||||
#define DMA_MBURST_INC8 DMA_SxCR_MBURST_1
|
||||
#define DMA_MBURST_INC16 DMA_SxCR_MBURST
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup DMA_Peripheral_burst DMA Peripheral burst
|
||||
* @brief DMA peripheral burst
|
||||
* @{
|
||||
*/
|
||||
#define DMA_PBURST_SINGLE 0x00000000U
|
||||
#define DMA_PBURST_INC4 DMA_SxCR_PBURST_0
|
||||
#define DMA_PBURST_INC8 DMA_SxCR_PBURST_1
|
||||
#define DMA_PBURST_INC16 DMA_SxCR_PBURST
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup DMA_interrupt_enable_definitions DMA interrupt enable definitions
|
||||
* @brief DMA interrupts definition
|
||||
* @{
|
||||
*/
|
||||
#define DMA_IT_TC DMA_SxCR_TCIE
|
||||
#define DMA_IT_HT DMA_SxCR_HTIE
|
||||
#define DMA_IT_TE DMA_SxCR_TEIE
|
||||
#define DMA_IT_DME DMA_SxCR_DMEIE
|
||||
#define DMA_IT_FE 0x00000080U
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup DMA_flag_definitions DMA flag definitions
|
||||
* @brief DMA flag definitions
|
||||
* @{
|
||||
*/
|
||||
#define DMA_FLAG_FEIF0_4 0x00000001U
|
||||
#define DMA_FLAG_DMEIF0_4 0x00000004U
|
||||
#define DMA_FLAG_TEIF0_4 0x00000008U
|
||||
#define DMA_FLAG_HTIF0_4 0x00000010U
|
||||
#define DMA_FLAG_TCIF0_4 0x00000020U
|
||||
#define DMA_FLAG_FEIF1_5 0x00000040U
|
||||
#define DMA_FLAG_DMEIF1_5 0x00000100U
|
||||
#define DMA_FLAG_TEIF1_5 0x00000200U
|
||||
#define DMA_FLAG_HTIF1_5 0x00000400U
|
||||
#define DMA_FLAG_TCIF1_5 0x00000800U
|
||||
#define DMA_FLAG_FEIF2_6 0x00010000U
|
||||
#define DMA_FLAG_DMEIF2_6 0x00040000U
|
||||
#define DMA_FLAG_TEIF2_6 0x00080000U
|
||||
#define DMA_FLAG_HTIF2_6 0x00100000U
|
||||
#define DMA_FLAG_TCIF2_6 0x00200000U
|
||||
#define DMA_FLAG_FEIF3_7 0x00400000U
|
||||
#define DMA_FLAG_DMEIF3_7 0x01000000U
|
||||
#define DMA_FLAG_TEIF3_7 0x02000000U
|
||||
#define DMA_FLAG_HTIF3_7 0x04000000U
|
||||
#define DMA_FLAG_TCIF3_7 0x08000000U
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
|
||||
/** @brief Reset DMA handle state
|
||||
* @param __HANDLE__ specifies the DMA handle.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_DMA_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_DMA_STATE_RESET)
|
||||
|
||||
/**
|
||||
* @brief Return the current DMA Stream FIFO filled level.
|
||||
* @param __HANDLE__ DMA handle
|
||||
* @retval The FIFO filling state.
|
||||
* - DMA_FIFOStatus_Less1QuarterFull: when FIFO is less than 1 quarter-full
|
||||
* and not empty.
|
||||
* - DMA_FIFOStatus_1QuarterFull: if more than 1 quarter-full.
|
||||
* - DMA_FIFOStatus_HalfFull: if more than 1 half-full.
|
||||
* - DMA_FIFOStatus_3QuartersFull: if more than 3 quarters-full.
|
||||
* - DMA_FIFOStatus_Empty: when FIFO is empty
|
||||
* - DMA_FIFOStatus_Full: when FIFO is full
|
||||
*/
|
||||
#define __HAL_DMA_GET_FS(__HANDLE__) (((__HANDLE__)->Instance->FCR & (DMA_SxFCR_FS)))
|
||||
|
||||
/**
|
||||
* @brief Enable the specified DMA Stream.
|
||||
* @param __HANDLE__ DMA handle
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_DMA_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= DMA_SxCR_EN)
|
||||
|
||||
/**
|
||||
* @brief Disable the specified DMA Stream.
|
||||
* @param __HANDLE__ DMA handle
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_DMA_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~DMA_SxCR_EN)
|
||||
|
||||
/* Interrupt & Flag management */
|
||||
|
||||
/**
|
||||
* @brief Return the current DMA Stream transfer complete flag.
|
||||
* @param __HANDLE__ DMA handle
|
||||
* @retval The specified transfer complete flag index.
|
||||
*/
|
||||
#define __HAL_DMA_GET_TC_FLAG_INDEX(__HANDLE__) \
|
||||
(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream0))? DMA_FLAG_TCIF0_4 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream0))? DMA_FLAG_TCIF0_4 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream4))? DMA_FLAG_TCIF0_4 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream4))? DMA_FLAG_TCIF0_4 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream1))? DMA_FLAG_TCIF1_5 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream1))? DMA_FLAG_TCIF1_5 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream5))? DMA_FLAG_TCIF1_5 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream5))? DMA_FLAG_TCIF1_5 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream2))? DMA_FLAG_TCIF2_6 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream2))? DMA_FLAG_TCIF2_6 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream6))? DMA_FLAG_TCIF2_6 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream6))? DMA_FLAG_TCIF2_6 :\
|
||||
DMA_FLAG_TCIF3_7)
|
||||
|
||||
/**
|
||||
* @brief Return the current DMA Stream half transfer complete flag.
|
||||
* @param __HANDLE__ DMA handle
|
||||
* @retval The specified half transfer complete flag index.
|
||||
*/
|
||||
#define __HAL_DMA_GET_HT_FLAG_INDEX(__HANDLE__)\
|
||||
(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream0))? DMA_FLAG_HTIF0_4 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream0))? DMA_FLAG_HTIF0_4 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream4))? DMA_FLAG_HTIF0_4 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream4))? DMA_FLAG_HTIF0_4 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream1))? DMA_FLAG_HTIF1_5 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream1))? DMA_FLAG_HTIF1_5 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream5))? DMA_FLAG_HTIF1_5 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream5))? DMA_FLAG_HTIF1_5 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream2))? DMA_FLAG_HTIF2_6 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream2))? DMA_FLAG_HTIF2_6 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream6))? DMA_FLAG_HTIF2_6 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream6))? DMA_FLAG_HTIF2_6 :\
|
||||
DMA_FLAG_HTIF3_7)
|
||||
|
||||
/**
|
||||
* @brief Return the current DMA Stream transfer error flag.
|
||||
* @param __HANDLE__ DMA handle
|
||||
* @retval The specified transfer error flag index.
|
||||
*/
|
||||
#define __HAL_DMA_GET_TE_FLAG_INDEX(__HANDLE__)\
|
||||
(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream0))? DMA_FLAG_TEIF0_4 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream0))? DMA_FLAG_TEIF0_4 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream4))? DMA_FLAG_TEIF0_4 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream4))? DMA_FLAG_TEIF0_4 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream1))? DMA_FLAG_TEIF1_5 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream1))? DMA_FLAG_TEIF1_5 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream5))? DMA_FLAG_TEIF1_5 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream5))? DMA_FLAG_TEIF1_5 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream2))? DMA_FLAG_TEIF2_6 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream2))? DMA_FLAG_TEIF2_6 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream6))? DMA_FLAG_TEIF2_6 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream6))? DMA_FLAG_TEIF2_6 :\
|
||||
DMA_FLAG_TEIF3_7)
|
||||
|
||||
/**
|
||||
* @brief Return the current DMA Stream FIFO error flag.
|
||||
* @param __HANDLE__ DMA handle
|
||||
* @retval The specified FIFO error flag index.
|
||||
*/
|
||||
#define __HAL_DMA_GET_FE_FLAG_INDEX(__HANDLE__)\
|
||||
(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream0))? DMA_FLAG_FEIF0_4 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream0))? DMA_FLAG_FEIF0_4 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream4))? DMA_FLAG_FEIF0_4 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream4))? DMA_FLAG_FEIF0_4 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream1))? DMA_FLAG_FEIF1_5 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream1))? DMA_FLAG_FEIF1_5 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream5))? DMA_FLAG_FEIF1_5 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream5))? DMA_FLAG_FEIF1_5 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream2))? DMA_FLAG_FEIF2_6 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream2))? DMA_FLAG_FEIF2_6 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream6))? DMA_FLAG_FEIF2_6 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream6))? DMA_FLAG_FEIF2_6 :\
|
||||
DMA_FLAG_FEIF3_7)
|
||||
|
||||
/**
|
||||
* @brief Return the current DMA Stream direct mode error flag.
|
||||
* @param __HANDLE__ DMA handle
|
||||
* @retval The specified direct mode error flag index.
|
||||
*/
|
||||
#define __HAL_DMA_GET_DME_FLAG_INDEX(__HANDLE__)\
|
||||
(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream0))? DMA_FLAG_DMEIF0_4 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream0))? DMA_FLAG_DMEIF0_4 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream4))? DMA_FLAG_DMEIF0_4 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream4))? DMA_FLAG_DMEIF0_4 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream1))? DMA_FLAG_DMEIF1_5 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream1))? DMA_FLAG_DMEIF1_5 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream5))? DMA_FLAG_DMEIF1_5 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream5))? DMA_FLAG_DMEIF1_5 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream2))? DMA_FLAG_DMEIF2_6 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream2))? DMA_FLAG_DMEIF2_6 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream6))? DMA_FLAG_DMEIF2_6 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream6))? DMA_FLAG_DMEIF2_6 :\
|
||||
DMA_FLAG_DMEIF3_7)
|
||||
|
||||
/**
|
||||
* @brief Get the DMA Stream pending flags.
|
||||
* @param __HANDLE__ DMA handle
|
||||
* @param __FLAG__ Get the specified flag.
|
||||
* This parameter can be any combination of the following values:
|
||||
* @arg DMA_FLAG_TCIFx: Transfer complete flag.
|
||||
* @arg DMA_FLAG_HTIFx: Half transfer complete flag.
|
||||
* @arg DMA_FLAG_TEIFx: Transfer error flag.
|
||||
* @arg DMA_FLAG_DMEIFx: Direct mode error flag.
|
||||
* @arg DMA_FLAG_FEIFx: FIFO error flag.
|
||||
* Where x can be 0_4, 1_5, 2_6 or 3_7 to select the DMA Stream flag.
|
||||
* @retval The state of FLAG (SET or RESET).
|
||||
*/
|
||||
#define __HAL_DMA_GET_FLAG(__HANDLE__, __FLAG__)\
|
||||
(((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA2_Stream3)? (DMA2->HISR & (__FLAG__)) :\
|
||||
((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Stream7)? (DMA2->LISR & (__FLAG__)) :\
|
||||
((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Stream3)? (DMA1->HISR & (__FLAG__)) : (DMA1->LISR & (__FLAG__)))
|
||||
|
||||
/**
|
||||
* @brief Clear the DMA Stream pending flags.
|
||||
* @param __HANDLE__ DMA handle
|
||||
* @param __FLAG__ specifies the flag to clear.
|
||||
* This parameter can be any combination of the following values:
|
||||
* @arg DMA_FLAG_TCIFx: Transfer complete flag.
|
||||
* @arg DMA_FLAG_HTIFx: Half transfer complete flag.
|
||||
* @arg DMA_FLAG_TEIFx: Transfer error flag.
|
||||
* @arg DMA_FLAG_DMEIFx: Direct mode error flag.
|
||||
* @arg DMA_FLAG_FEIFx: FIFO error flag.
|
||||
* Where x can be 0_4, 1_5, 2_6 or 3_7 to select the DMA Stream flag.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_DMA_CLEAR_FLAG(__HANDLE__, __FLAG__) \
|
||||
(((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA2_Stream3)? (DMA2->HIFCR = (__FLAG__)) :\
|
||||
((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Stream7)? (DMA2->LIFCR = (__FLAG__)) :\
|
||||
((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Stream3)? (DMA1->HIFCR = (__FLAG__)) : (DMA1->LIFCR = (__FLAG__)))
|
||||
|
||||
/**
|
||||
* @brief Enable the specified DMA Stream interrupts.
|
||||
* @param __HANDLE__ DMA handle
|
||||
* @param __INTERRUPT__ specifies the DMA interrupt sources to be enabled or disabled.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg DMA_IT_TC: Transfer complete interrupt mask.
|
||||
* @arg DMA_IT_HT: Half transfer complete interrupt mask.
|
||||
* @arg DMA_IT_TE: Transfer error interrupt mask.
|
||||
* @arg DMA_IT_FE: FIFO error interrupt mask.
|
||||
* @arg DMA_IT_DME: Direct mode error interrupt.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_DMA_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((__INTERRUPT__) != DMA_IT_FE)? \
|
||||
((__HANDLE__)->Instance->CR |= (__INTERRUPT__)) : ((__HANDLE__)->Instance->FCR |= (__INTERRUPT__)))
|
||||
|
||||
/**
|
||||
* @brief Disable the specified DMA Stream interrupts.
|
||||
* @param __HANDLE__ DMA handle
|
||||
* @param __INTERRUPT__ specifies the DMA interrupt sources to be enabled or disabled.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg DMA_IT_TC: Transfer complete interrupt mask.
|
||||
* @arg DMA_IT_HT: Half transfer complete interrupt mask.
|
||||
* @arg DMA_IT_TE: Transfer error interrupt mask.
|
||||
* @arg DMA_IT_FE: FIFO error interrupt mask.
|
||||
* @arg DMA_IT_DME: Direct mode error interrupt.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_DMA_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((__INTERRUPT__) != DMA_IT_FE)? \
|
||||
((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__)) : ((__HANDLE__)->Instance->FCR &= ~(__INTERRUPT__)))
|
||||
|
||||
/**
|
||||
* @brief Check whether the specified DMA Stream interrupt is enabled or not.
|
||||
* @param __HANDLE__ DMA handle
|
||||
* @param __INTERRUPT__ specifies the DMA interrupt source to check.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg DMA_IT_TC: Transfer complete interrupt mask.
|
||||
* @arg DMA_IT_HT: Half transfer complete interrupt mask.
|
||||
* @arg DMA_IT_TE: Transfer error interrupt mask.
|
||||
* @arg DMA_IT_FE: FIFO error interrupt mask.
|
||||
* @arg DMA_IT_DME: Direct mode error interrupt.
|
||||
* @retval The state of DMA_IT.
|
||||
*/
|
||||
#define __HAL_DMA_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((__INTERRUPT__) != DMA_IT_FE)? \
|
||||
((__HANDLE__)->Instance->CR & (__INTERRUPT__)) : \
|
||||
((__HANDLE__)->Instance->FCR & (__INTERRUPT__)))
|
||||
|
||||
/**
|
||||
* @brief Writes the number of data units to be transferred on the DMA Stream.
|
||||
* @param __HANDLE__ DMA handle
|
||||
* @param __COUNTER__ Number of data units to be transferred (from 0 to 65535)
|
||||
* Number of data items depends only on the Peripheral data format.
|
||||
*
|
||||
* @note If Peripheral data format is Bytes: number of data units is equal
|
||||
* to total number of bytes to be transferred.
|
||||
*
|
||||
* @note If Peripheral data format is Half-Word: number of data units is
|
||||
* equal to total number of bytes to be transferred / 2.
|
||||
*
|
||||
* @note If Peripheral data format is Word: number of data units is equal
|
||||
* to total number of bytes to be transferred / 4.
|
||||
*
|
||||
* @retval The number of remaining data units in the current DMAy Streamx transfer.
|
||||
*/
|
||||
#define __HAL_DMA_SET_COUNTER(__HANDLE__, __COUNTER__) ((__HANDLE__)->Instance->NDTR = (uint16_t)(__COUNTER__))
|
||||
|
||||
/**
|
||||
* @brief Returns the number of remaining data units in the current DMAy Streamx transfer.
|
||||
* @param __HANDLE__ DMA handle
|
||||
*
|
||||
* @retval The number of remaining data units in the current DMA Stream transfer.
|
||||
*/
|
||||
#define __HAL_DMA_GET_COUNTER(__HANDLE__) ((__HANDLE__)->Instance->NDTR)
|
||||
|
||||
|
||||
/* Include DMA HAL Extension module */
|
||||
#include "stm32f7xx_hal_dma_ex.h"
|
||||
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
|
||||
/** @defgroup DMA_Exported_Functions DMA Exported Functions
|
||||
* @brief DMA Exported functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup DMA_Exported_Functions_Group1 Initialization and de-initialization functions
|
||||
* @brief Initialization and de-initialization functions
|
||||
* @{
|
||||
*/
|
||||
HAL_StatusTypeDef HAL_DMA_Init(DMA_HandleTypeDef *hdma);
|
||||
HAL_StatusTypeDef HAL_DMA_DeInit(DMA_HandleTypeDef *hdma);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup DMA_Exported_Functions_Group2 I/O operation functions
|
||||
* @brief I/O operation functions
|
||||
* @{
|
||||
*/
|
||||
HAL_StatusTypeDef HAL_DMA_Start (DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength);
|
||||
HAL_StatusTypeDef HAL_DMA_Start_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength);
|
||||
HAL_StatusTypeDef HAL_DMA_Abort(DMA_HandleTypeDef *hdma);
|
||||
HAL_StatusTypeDef HAL_DMA_Abort_IT(DMA_HandleTypeDef *hdma);
|
||||
HAL_StatusTypeDef HAL_DMA_PollForTransfer(DMA_HandleTypeDef *hdma, HAL_DMA_LevelCompleteTypeDef CompleteLevel, uint32_t Timeout);
|
||||
void HAL_DMA_IRQHandler(DMA_HandleTypeDef *hdma);
|
||||
HAL_StatusTypeDef HAL_DMA_RegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID, void (* pCallback)(DMA_HandleTypeDef *_hdma));
|
||||
HAL_StatusTypeDef HAL_DMA_UnRegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID);
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup DMA_Exported_Functions_Group3 Peripheral State functions
|
||||
* @brief Peripheral State functions
|
||||
* @{
|
||||
*/
|
||||
HAL_DMA_StateTypeDef HAL_DMA_GetState(DMA_HandleTypeDef *hdma);
|
||||
uint32_t HAL_DMA_GetError(DMA_HandleTypeDef *hdma);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/* Private Constants -------------------------------------------------------------*/
|
||||
/** @defgroup DMA_Private_Constants DMA Private Constants
|
||||
* @brief DMA private defines and constants
|
||||
* @{
|
||||
*/
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private macros ------------------------------------------------------------*/
|
||||
/** @defgroup DMA_Private_Macros DMA Private Macros
|
||||
* @brief DMA private macros
|
||||
* @{
|
||||
*/
|
||||
#define IS_DMA_DIRECTION(DIRECTION) (((DIRECTION) == DMA_PERIPH_TO_MEMORY ) || \
|
||||
((DIRECTION) == DMA_MEMORY_TO_PERIPH) || \
|
||||
((DIRECTION) == DMA_MEMORY_TO_MEMORY))
|
||||
|
||||
#define IS_DMA_BUFFER_SIZE(SIZE) (((SIZE) >= 0x01U) && ((SIZE) < 0x10000U))
|
||||
|
||||
#define IS_DMA_PERIPHERAL_INC_STATE(STATE) (((STATE) == DMA_PINC_ENABLE) || \
|
||||
((STATE) == DMA_PINC_DISABLE))
|
||||
|
||||
#define IS_DMA_MEMORY_INC_STATE(STATE) (((STATE) == DMA_MINC_ENABLE) || \
|
||||
((STATE) == DMA_MINC_DISABLE))
|
||||
|
||||
#define IS_DMA_PERIPHERAL_DATA_SIZE(SIZE) (((SIZE) == DMA_PDATAALIGN_BYTE) || \
|
||||
((SIZE) == DMA_PDATAALIGN_HALFWORD) || \
|
||||
((SIZE) == DMA_PDATAALIGN_WORD))
|
||||
|
||||
#define IS_DMA_MEMORY_DATA_SIZE(SIZE) (((SIZE) == DMA_MDATAALIGN_BYTE) || \
|
||||
((SIZE) == DMA_MDATAALIGN_HALFWORD) || \
|
||||
((SIZE) == DMA_MDATAALIGN_WORD ))
|
||||
|
||||
#define IS_DMA_MODE(MODE) (((MODE) == DMA_NORMAL ) || \
|
||||
((MODE) == DMA_CIRCULAR) || \
|
||||
((MODE) == DMA_PFCTRL))
|
||||
|
||||
#define IS_DMA_PRIORITY(PRIORITY) (((PRIORITY) == DMA_PRIORITY_LOW ) || \
|
||||
((PRIORITY) == DMA_PRIORITY_MEDIUM) || \
|
||||
((PRIORITY) == DMA_PRIORITY_HIGH) || \
|
||||
((PRIORITY) == DMA_PRIORITY_VERY_HIGH))
|
||||
|
||||
#define IS_DMA_FIFO_MODE_STATE(STATE) (((STATE) == DMA_FIFOMODE_DISABLE ) || \
|
||||
((STATE) == DMA_FIFOMODE_ENABLE))
|
||||
|
||||
#define IS_DMA_FIFO_THRESHOLD(THRESHOLD) (((THRESHOLD) == DMA_FIFO_THRESHOLD_1QUARTERFULL ) || \
|
||||
((THRESHOLD) == DMA_FIFO_THRESHOLD_HALFFULL) || \
|
||||
((THRESHOLD) == DMA_FIFO_THRESHOLD_3QUARTERSFULL) || \
|
||||
((THRESHOLD) == DMA_FIFO_THRESHOLD_FULL))
|
||||
|
||||
#define IS_DMA_MEMORY_BURST(BURST) (((BURST) == DMA_MBURST_SINGLE) || \
|
||||
((BURST) == DMA_MBURST_INC4) || \
|
||||
((BURST) == DMA_MBURST_INC8) || \
|
||||
((BURST) == DMA_MBURST_INC16))
|
||||
|
||||
#define IS_DMA_PERIPHERAL_BURST(BURST) (((BURST) == DMA_PBURST_SINGLE) || \
|
||||
((BURST) == DMA_PBURST_INC4) || \
|
||||
((BURST) == DMA_PBURST_INC8) || \
|
||||
((BURST) == DMA_PBURST_INC16))
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private functions ---------------------------------------------------------*/
|
||||
/** @defgroup DMA_Private_Functions DMA Private Functions
|
||||
* @brief DMA private functions
|
||||
* @{
|
||||
*/
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __STM32F7xx_HAL_DMA_H */
|
||||
|
||||
681
project/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_dma2d.h
Normal file
681
project/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_dma2d.h
Normal file
@@ -0,0 +1,681 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f7xx_hal_dma2d.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of DMA2D HAL module.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef STM32F7xx_HAL_DMA2D_H
|
||||
#define STM32F7xx_HAL_DMA2D_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f7xx_hal_def.h"
|
||||
|
||||
/** @addtogroup STM32F7xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
#if defined (DMA2D)
|
||||
|
||||
/** @addtogroup DMA2D DMA2D
|
||||
* @brief DMA2D HAL module driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/** @defgroup DMA2D_Exported_Types DMA2D Exported Types
|
||||
* @{
|
||||
*/
|
||||
#define MAX_DMA2D_LAYER 2U /*!< DMA2D maximum number of layers */
|
||||
|
||||
/**
|
||||
* @brief DMA2D CLUT Structure definition
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint32_t *pCLUT; /*!< Configures the DMA2D CLUT memory address.*/
|
||||
|
||||
uint32_t CLUTColorMode; /*!< Configures the DMA2D CLUT color mode.
|
||||
This parameter can be one value of @ref DMA2D_CLUT_CM. */
|
||||
|
||||
uint32_t Size; /*!< Configures the DMA2D CLUT size.
|
||||
This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF.*/
|
||||
} DMA2D_CLUTCfgTypeDef;
|
||||
|
||||
/**
|
||||
* @brief DMA2D Init structure definition
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint32_t Mode; /*!< Configures the DMA2D transfer mode.
|
||||
This parameter can be one value of @ref DMA2D_Mode. */
|
||||
|
||||
uint32_t ColorMode; /*!< Configures the color format of the output image.
|
||||
This parameter can be one value of @ref DMA2D_Output_Color_Mode. */
|
||||
|
||||
uint32_t OutputOffset; /*!< Specifies the Offset value.
|
||||
This parameter must be a number between
|
||||
Min_Data = 0x0000 and Max_Data = 0x3FFF. */
|
||||
#if defined (DMA2D_ALPHA_INV_RB_SWAP_SUPPORT)
|
||||
uint32_t AlphaInverted; /*!< Select regular or inverted alpha value
|
||||
for the output pixel format converter.
|
||||
This parameter can be one value of @ref DMA2D_Alpha_Inverted. */
|
||||
|
||||
uint32_t RedBlueSwap; /*!< Select regular mode (RGB or ARGB) or swap mode (BGR or ABGR)
|
||||
for the output pixel format converter.
|
||||
This parameter can be one value of @ref DMA2D_RB_Swap. */
|
||||
|
||||
#endif /* DMA2D_ALPHA_INV_RB_SWAP_SUPPORT */
|
||||
|
||||
|
||||
|
||||
|
||||
} DMA2D_InitTypeDef;
|
||||
|
||||
|
||||
/**
|
||||
* @brief DMA2D Layer structure definition
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint32_t InputOffset; /*!< Configures the DMA2D foreground or background offset.
|
||||
This parameter must be a number between
|
||||
Min_Data = 0x0000 and Max_Data = 0x3FFF. */
|
||||
|
||||
uint32_t InputColorMode; /*!< Configures the DMA2D foreground or background color mode.
|
||||
This parameter can be one value of @ref DMA2D_Input_Color_Mode. */
|
||||
|
||||
uint32_t AlphaMode; /*!< Configures the DMA2D foreground or background alpha mode.
|
||||
This parameter can be one value of @ref DMA2D_Alpha_Mode. */
|
||||
|
||||
uint32_t InputAlpha; /*!< Specifies the DMA2D foreground or background alpha value and color value
|
||||
in case of A8 or A4 color mode.
|
||||
This parameter must be a number between Min_Data = 0x00
|
||||
and Max_Data = 0xFF except for the color modes detailed below.
|
||||
@note In case of A8 or A4 color mode (ARGB),
|
||||
this parameter must be a number between
|
||||
Min_Data = 0x00000000 and Max_Data = 0xFFFFFFFF where
|
||||
- InputAlpha[24:31] is the alpha value ALPHA[0:7]
|
||||
- InputAlpha[16:23] is the red value RED[0:7]
|
||||
- InputAlpha[8:15] is the green value GREEN[0:7]
|
||||
- InputAlpha[0:7] is the blue value BLUE[0:7]. */
|
||||
#if defined (DMA2D_ALPHA_INV_RB_SWAP_SUPPORT)
|
||||
uint32_t AlphaInverted; /*!< Select regular or inverted alpha value.
|
||||
This parameter can be one value of @ref DMA2D_Alpha_Inverted. */
|
||||
|
||||
uint32_t RedBlueSwap; /*!< Select regular mode (RGB or ARGB) or swap mode (BGR or ABGR).
|
||||
This parameter can be one value of @ref DMA2D_RB_Swap. */
|
||||
#endif /* DMA2D_ALPHA_INV_RB_SWAP_SUPPORT */
|
||||
|
||||
|
||||
} DMA2D_LayerCfgTypeDef;
|
||||
|
||||
/**
|
||||
* @brief HAL DMA2D State structures definition
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
HAL_DMA2D_STATE_RESET = 0x00U, /*!< DMA2D not yet initialized or disabled */
|
||||
HAL_DMA2D_STATE_READY = 0x01U, /*!< Peripheral Initialized and ready for use */
|
||||
HAL_DMA2D_STATE_BUSY = 0x02U, /*!< An internal process is ongoing */
|
||||
HAL_DMA2D_STATE_TIMEOUT = 0x03U, /*!< Timeout state */
|
||||
HAL_DMA2D_STATE_ERROR = 0x04U, /*!< DMA2D state error */
|
||||
HAL_DMA2D_STATE_SUSPEND = 0x05U /*!< DMA2D process is suspended */
|
||||
} HAL_DMA2D_StateTypeDef;
|
||||
|
||||
/**
|
||||
* @brief DMA2D handle Structure definition
|
||||
*/
|
||||
typedef struct __DMA2D_HandleTypeDef
|
||||
{
|
||||
DMA2D_TypeDef *Instance; /*!< DMA2D register base address. */
|
||||
|
||||
DMA2D_InitTypeDef Init; /*!< DMA2D communication parameters. */
|
||||
|
||||
void (* XferCpltCallback)(struct __DMA2D_HandleTypeDef *hdma2d); /*!< DMA2D transfer complete callback. */
|
||||
|
||||
void (* XferErrorCallback)(struct __DMA2D_HandleTypeDef *hdma2d); /*!< DMA2D transfer error callback. */
|
||||
|
||||
#if (USE_HAL_DMA2D_REGISTER_CALLBACKS == 1)
|
||||
void (* LineEventCallback)(struct __DMA2D_HandleTypeDef *hdma2d); /*!< DMA2D line event callback. */
|
||||
|
||||
void (* CLUTLoadingCpltCallback)(struct __DMA2D_HandleTypeDef *hdma2d); /*!< DMA2D CLUT loading completion callback */
|
||||
|
||||
void (* MspInitCallback)(struct __DMA2D_HandleTypeDef *hdma2d); /*!< DMA2D Msp Init callback. */
|
||||
|
||||
void (* MspDeInitCallback)(struct __DMA2D_HandleTypeDef *hdma2d); /*!< DMA2D Msp DeInit callback. */
|
||||
|
||||
#endif /* (USE_HAL_DMA2D_REGISTER_CALLBACKS) */
|
||||
|
||||
DMA2D_LayerCfgTypeDef LayerCfg[MAX_DMA2D_LAYER]; /*!< DMA2D Layers parameters */
|
||||
|
||||
HAL_LockTypeDef Lock; /*!< DMA2D lock. */
|
||||
|
||||
__IO HAL_DMA2D_StateTypeDef State; /*!< DMA2D transfer state. */
|
||||
|
||||
__IO uint32_t ErrorCode; /*!< DMA2D error code. */
|
||||
} DMA2D_HandleTypeDef;
|
||||
|
||||
#if (USE_HAL_DMA2D_REGISTER_CALLBACKS == 1)
|
||||
/**
|
||||
* @brief HAL DMA2D Callback pointer definition
|
||||
*/
|
||||
typedef void (*pDMA2D_CallbackTypeDef)(DMA2D_HandleTypeDef *hdma2d); /*!< Pointer to a DMA2D common callback function */
|
||||
#endif /* USE_HAL_DMA2D_REGISTER_CALLBACKS */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/** @defgroup DMA2D_Exported_Constants DMA2D Exported Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup DMA2D_Error_Code DMA2D Error Code
|
||||
* @{
|
||||
*/
|
||||
#define HAL_DMA2D_ERROR_NONE 0x00000000U /*!< No error */
|
||||
#define HAL_DMA2D_ERROR_TE 0x00000001U /*!< Transfer error */
|
||||
#define HAL_DMA2D_ERROR_CE 0x00000002U /*!< Configuration error */
|
||||
#define HAL_DMA2D_ERROR_CAE 0x00000004U /*!< CLUT access error */
|
||||
#define HAL_DMA2D_ERROR_TIMEOUT 0x00000020U /*!< Timeout error */
|
||||
#if (USE_HAL_DMA2D_REGISTER_CALLBACKS == 1)
|
||||
#define HAL_DMA2D_ERROR_INVALID_CALLBACK 0x00000040U /*!< Invalid callback error */
|
||||
#endif /* USE_HAL_UART_REGISTER_CALLBACKS */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup DMA2D_Mode DMA2D Mode
|
||||
* @{
|
||||
*/
|
||||
#define DMA2D_M2M 0x00000000U /*!< DMA2D memory to memory transfer mode */
|
||||
#define DMA2D_M2M_PFC DMA2D_CR_MODE_0 /*!< DMA2D memory to memory with pixel format conversion transfer mode */
|
||||
#define DMA2D_M2M_BLEND DMA2D_CR_MODE_1 /*!< DMA2D memory to memory with blending transfer mode */
|
||||
#define DMA2D_R2M DMA2D_CR_MODE /*!< DMA2D register to memory transfer mode */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup DMA2D_Output_Color_Mode DMA2D Output Color Mode
|
||||
* @{
|
||||
*/
|
||||
#define DMA2D_OUTPUT_ARGB8888 0x00000000U /*!< ARGB8888 DMA2D color mode */
|
||||
#define DMA2D_OUTPUT_RGB888 DMA2D_OPFCCR_CM_0 /*!< RGB888 DMA2D color mode */
|
||||
#define DMA2D_OUTPUT_RGB565 DMA2D_OPFCCR_CM_1 /*!< RGB565 DMA2D color mode */
|
||||
#define DMA2D_OUTPUT_ARGB1555 (DMA2D_OPFCCR_CM_0|DMA2D_OPFCCR_CM_1) /*!< ARGB1555 DMA2D color mode */
|
||||
#define DMA2D_OUTPUT_ARGB4444 DMA2D_OPFCCR_CM_2 /*!< ARGB4444 DMA2D color mode */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup DMA2D_Input_Color_Mode DMA2D Input Color Mode
|
||||
* @{
|
||||
*/
|
||||
#define DMA2D_INPUT_ARGB8888 0x00000000U /*!< ARGB8888 color mode */
|
||||
#define DMA2D_INPUT_RGB888 0x00000001U /*!< RGB888 color mode */
|
||||
#define DMA2D_INPUT_RGB565 0x00000002U /*!< RGB565 color mode */
|
||||
#define DMA2D_INPUT_ARGB1555 0x00000003U /*!< ARGB1555 color mode */
|
||||
#define DMA2D_INPUT_ARGB4444 0x00000004U /*!< ARGB4444 color mode */
|
||||
#define DMA2D_INPUT_L8 0x00000005U /*!< L8 color mode */
|
||||
#define DMA2D_INPUT_AL44 0x00000006U /*!< AL44 color mode */
|
||||
#define DMA2D_INPUT_AL88 0x00000007U /*!< AL88 color mode */
|
||||
#define DMA2D_INPUT_L4 0x00000008U /*!< L4 color mode */
|
||||
#define DMA2D_INPUT_A8 0x00000009U /*!< A8 color mode */
|
||||
#define DMA2D_INPUT_A4 0x0000000AU /*!< A4 color mode */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup DMA2D_Alpha_Mode DMA2D Alpha Mode
|
||||
* @{
|
||||
*/
|
||||
#define DMA2D_NO_MODIF_ALPHA 0x00000000U /*!< No modification of the alpha channel value */
|
||||
#define DMA2D_REPLACE_ALPHA 0x00000001U /*!< Replace original alpha channel value by programmed alpha value */
|
||||
#define DMA2D_COMBINE_ALPHA 0x00000002U /*!< Replace original alpha channel value by programmed alpha value
|
||||
with original alpha channel value */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#if defined (DMA2D_ALPHA_INV_RB_SWAP_SUPPORT)
|
||||
/** @defgroup DMA2D_Alpha_Inverted DMA2D Alpha Inversion
|
||||
* @{
|
||||
*/
|
||||
#define DMA2D_REGULAR_ALPHA 0x00000000U /*!< No modification of the alpha channel value */
|
||||
#define DMA2D_INVERTED_ALPHA 0x00000001U /*!< Invert the alpha channel value */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup DMA2D_RB_Swap DMA2D Red and Blue Swap
|
||||
* @{
|
||||
*/
|
||||
#define DMA2D_RB_REGULAR 0x00000000U /*!< Select regular mode (RGB or ARGB) */
|
||||
#define DMA2D_RB_SWAP 0x00000001U /*!< Select swap mode (BGR or ABGR) */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
#endif /* DMA2D_ALPHA_INV_RB_SWAP_SUPPORT */
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
/** @defgroup DMA2D_CLUT_CM DMA2D CLUT Color Mode
|
||||
* @{
|
||||
*/
|
||||
#define DMA2D_CCM_ARGB8888 0x00000000U /*!< ARGB8888 DMA2D CLUT color mode */
|
||||
#define DMA2D_CCM_RGB888 0x00000001U /*!< RGB888 DMA2D CLUT color mode */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup DMA2D_Interrupts DMA2D Interrupts
|
||||
* @{
|
||||
*/
|
||||
#define DMA2D_IT_CE DMA2D_CR_CEIE /*!< Configuration Error Interrupt */
|
||||
#define DMA2D_IT_CTC DMA2D_CR_CTCIE /*!< CLUT Transfer Complete Interrupt */
|
||||
#define DMA2D_IT_CAE DMA2D_CR_CAEIE /*!< CLUT Access Error Interrupt */
|
||||
#define DMA2D_IT_TW DMA2D_CR_TWIE /*!< Transfer Watermark Interrupt */
|
||||
#define DMA2D_IT_TC DMA2D_CR_TCIE /*!< Transfer Complete Interrupt */
|
||||
#define DMA2D_IT_TE DMA2D_CR_TEIE /*!< Transfer Error Interrupt */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup DMA2D_Flags DMA2D Flags
|
||||
* @{
|
||||
*/
|
||||
#define DMA2D_FLAG_CE DMA2D_ISR_CEIF /*!< Configuration Error Interrupt Flag */
|
||||
#define DMA2D_FLAG_CTC DMA2D_ISR_CTCIF /*!< CLUT Transfer Complete Interrupt Flag */
|
||||
#define DMA2D_FLAG_CAE DMA2D_ISR_CAEIF /*!< CLUT Access Error Interrupt Flag */
|
||||
#define DMA2D_FLAG_TW DMA2D_ISR_TWIF /*!< Transfer Watermark Interrupt Flag */
|
||||
#define DMA2D_FLAG_TC DMA2D_ISR_TCIF /*!< Transfer Complete Interrupt Flag */
|
||||
#define DMA2D_FLAG_TE DMA2D_ISR_TEIF /*!< Transfer Error Interrupt Flag */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#if (USE_HAL_DMA2D_REGISTER_CALLBACKS == 1)
|
||||
/**
|
||||
* @brief HAL DMA2D common Callback ID enumeration definition
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
HAL_DMA2D_MSPINIT_CB_ID = 0x00U, /*!< DMA2D MspInit callback ID */
|
||||
HAL_DMA2D_MSPDEINIT_CB_ID = 0x01U, /*!< DMA2D MspDeInit callback ID */
|
||||
HAL_DMA2D_TRANSFERCOMPLETE_CB_ID = 0x02U, /*!< DMA2D transfer complete callback ID */
|
||||
HAL_DMA2D_TRANSFERERROR_CB_ID = 0x03U, /*!< DMA2D transfer error callback ID */
|
||||
HAL_DMA2D_LINEEVENT_CB_ID = 0x04U, /*!< DMA2D line event callback ID */
|
||||
HAL_DMA2D_CLUTLOADINGCPLT_CB_ID = 0x05U, /*!< DMA2D CLUT loading completion callback ID */
|
||||
} HAL_DMA2D_CallbackIDTypeDef;
|
||||
#endif /* USE_HAL_DMA2D_REGISTER_CALLBACKS */
|
||||
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/* Exported macros ------------------------------------------------------------*/
|
||||
/** @defgroup DMA2D_Exported_Macros DMA2D Exported Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @brief Reset DMA2D handle state
|
||||
* @param __HANDLE__ specifies the DMA2D handle.
|
||||
* @retval None
|
||||
*/
|
||||
#if (USE_HAL_DMA2D_REGISTER_CALLBACKS == 1)
|
||||
#define __HAL_DMA2D_RESET_HANDLE_STATE(__HANDLE__) do{ \
|
||||
(__HANDLE__)->State = HAL_DMA2D_STATE_RESET;\
|
||||
(__HANDLE__)->MspInitCallback = NULL; \
|
||||
(__HANDLE__)->MspDeInitCallback = NULL; \
|
||||
}while(0)
|
||||
#else
|
||||
#define __HAL_DMA2D_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_DMA2D_STATE_RESET)
|
||||
#endif /* USE_HAL_DMA2D_REGISTER_CALLBACKS */
|
||||
|
||||
|
||||
/**
|
||||
* @brief Enable the DMA2D.
|
||||
* @param __HANDLE__ DMA2D handle
|
||||
* @retval None.
|
||||
*/
|
||||
#define __HAL_DMA2D_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= DMA2D_CR_START)
|
||||
|
||||
|
||||
/* Interrupt & Flag management */
|
||||
/**
|
||||
* @brief Get the DMA2D pending flags.
|
||||
* @param __HANDLE__ DMA2D handle
|
||||
* @param __FLAG__ flag to check.
|
||||
* This parameter can be any combination of the following values:
|
||||
* @arg DMA2D_FLAG_CE: Configuration error flag
|
||||
* @arg DMA2D_FLAG_CTC: CLUT transfer complete flag
|
||||
* @arg DMA2D_FLAG_CAE: CLUT access error flag
|
||||
* @arg DMA2D_FLAG_TW: Transfer Watermark flag
|
||||
* @arg DMA2D_FLAG_TC: Transfer complete flag
|
||||
* @arg DMA2D_FLAG_TE: Transfer error flag
|
||||
* @retval The state of FLAG.
|
||||
*/
|
||||
#define __HAL_DMA2D_GET_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR & (__FLAG__))
|
||||
|
||||
/**
|
||||
* @brief Clear the DMA2D pending flags.
|
||||
* @param __HANDLE__ DMA2D handle
|
||||
* @param __FLAG__ specifies the flag to clear.
|
||||
* This parameter can be any combination of the following values:
|
||||
* @arg DMA2D_FLAG_CE: Configuration error flag
|
||||
* @arg DMA2D_FLAG_CTC: CLUT transfer complete flag
|
||||
* @arg DMA2D_FLAG_CAE: CLUT access error flag
|
||||
* @arg DMA2D_FLAG_TW: Transfer Watermark flag
|
||||
* @arg DMA2D_FLAG_TC: Transfer complete flag
|
||||
* @arg DMA2D_FLAG_TE: Transfer error flag
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_DMA2D_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->IFCR = (__FLAG__))
|
||||
|
||||
/**
|
||||
* @brief Enable the specified DMA2D interrupts.
|
||||
* @param __HANDLE__ DMA2D handle
|
||||
* @param __INTERRUPT__ specifies the DMA2D interrupt sources to be enabled.
|
||||
* This parameter can be any combination of the following values:
|
||||
* @arg DMA2D_IT_CE: Configuration error interrupt mask
|
||||
* @arg DMA2D_IT_CTC: CLUT transfer complete interrupt mask
|
||||
* @arg DMA2D_IT_CAE: CLUT access error interrupt mask
|
||||
* @arg DMA2D_IT_TW: Transfer Watermark interrupt mask
|
||||
* @arg DMA2D_IT_TC: Transfer complete interrupt mask
|
||||
* @arg DMA2D_IT_TE: Transfer error interrupt mask
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_DMA2D_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR |= (__INTERRUPT__))
|
||||
|
||||
/**
|
||||
* @brief Disable the specified DMA2D interrupts.
|
||||
* @param __HANDLE__ DMA2D handle
|
||||
* @param __INTERRUPT__ specifies the DMA2D interrupt sources to be disabled.
|
||||
* This parameter can be any combination of the following values:
|
||||
* @arg DMA2D_IT_CE: Configuration error interrupt mask
|
||||
* @arg DMA2D_IT_CTC: CLUT transfer complete interrupt mask
|
||||
* @arg DMA2D_IT_CAE: CLUT access error interrupt mask
|
||||
* @arg DMA2D_IT_TW: Transfer Watermark interrupt mask
|
||||
* @arg DMA2D_IT_TC: Transfer complete interrupt mask
|
||||
* @arg DMA2D_IT_TE: Transfer error interrupt mask
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_DMA2D_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__))
|
||||
|
||||
/**
|
||||
* @brief Check whether the specified DMA2D interrupt source is enabled or not.
|
||||
* @param __HANDLE__ DMA2D handle
|
||||
* @param __INTERRUPT__ specifies the DMA2D interrupt source to check.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg DMA2D_IT_CE: Configuration error interrupt mask
|
||||
* @arg DMA2D_IT_CTC: CLUT transfer complete interrupt mask
|
||||
* @arg DMA2D_IT_CAE: CLUT access error interrupt mask
|
||||
* @arg DMA2D_IT_TW: Transfer Watermark interrupt mask
|
||||
* @arg DMA2D_IT_TC: Transfer complete interrupt mask
|
||||
* @arg DMA2D_IT_TE: Transfer error interrupt mask
|
||||
* @retval The state of INTERRUPT source.
|
||||
*/
|
||||
#define __HAL_DMA2D_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR & (__INTERRUPT__))
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @addtogroup DMA2D_Exported_Functions DMA2D Exported Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup DMA2D_Exported_Functions_Group1 Initialization and de-initialization functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Initialization and de-initialization functions *******************************/
|
||||
HAL_StatusTypeDef HAL_DMA2D_Init(DMA2D_HandleTypeDef *hdma2d);
|
||||
HAL_StatusTypeDef HAL_DMA2D_DeInit(DMA2D_HandleTypeDef *hdma2d);
|
||||
void HAL_DMA2D_MspInit(DMA2D_HandleTypeDef *hdma2d);
|
||||
void HAL_DMA2D_MspDeInit(DMA2D_HandleTypeDef *hdma2d);
|
||||
/* Callbacks Register/UnRegister functions ***********************************/
|
||||
#if (USE_HAL_DMA2D_REGISTER_CALLBACKS == 1)
|
||||
HAL_StatusTypeDef HAL_DMA2D_RegisterCallback(DMA2D_HandleTypeDef *hdma2d, HAL_DMA2D_CallbackIDTypeDef CallbackID,
|
||||
pDMA2D_CallbackTypeDef pCallback);
|
||||
HAL_StatusTypeDef HAL_DMA2D_UnRegisterCallback(DMA2D_HandleTypeDef *hdma2d, HAL_DMA2D_CallbackIDTypeDef CallbackID);
|
||||
#endif /* USE_HAL_DMA2D_REGISTER_CALLBACKS */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
|
||||
/** @addtogroup DMA2D_Exported_Functions_Group2 IO operation functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* IO operation functions *******************************************************/
|
||||
HAL_StatusTypeDef HAL_DMA2D_Start(DMA2D_HandleTypeDef *hdma2d, uint32_t pdata, uint32_t DstAddress, uint32_t Width,
|
||||
uint32_t Height);
|
||||
HAL_StatusTypeDef HAL_DMA2D_BlendingStart(DMA2D_HandleTypeDef *hdma2d, uint32_t SrcAddress1, uint32_t SrcAddress2,
|
||||
uint32_t DstAddress, uint32_t Width, uint32_t Height);
|
||||
HAL_StatusTypeDef HAL_DMA2D_Start_IT(DMA2D_HandleTypeDef *hdma2d, uint32_t pdata, uint32_t DstAddress, uint32_t Width,
|
||||
uint32_t Height);
|
||||
HAL_StatusTypeDef HAL_DMA2D_BlendingStart_IT(DMA2D_HandleTypeDef *hdma2d, uint32_t SrcAddress1, uint32_t SrcAddress2,
|
||||
uint32_t DstAddress, uint32_t Width, uint32_t Height);
|
||||
HAL_StatusTypeDef HAL_DMA2D_Suspend(DMA2D_HandleTypeDef *hdma2d);
|
||||
HAL_StatusTypeDef HAL_DMA2D_Resume(DMA2D_HandleTypeDef *hdma2d);
|
||||
HAL_StatusTypeDef HAL_DMA2D_Abort(DMA2D_HandleTypeDef *hdma2d);
|
||||
HAL_StatusTypeDef HAL_DMA2D_EnableCLUT(DMA2D_HandleTypeDef *hdma2d, uint32_t LayerIdx);
|
||||
HAL_StatusTypeDef HAL_DMA2D_CLUTStartLoad(DMA2D_HandleTypeDef *hdma2d, DMA2D_CLUTCfgTypeDef *CLUTCfg,
|
||||
uint32_t LayerIdx);
|
||||
HAL_StatusTypeDef HAL_DMA2D_CLUTStartLoad_IT(DMA2D_HandleTypeDef *hdma2d, DMA2D_CLUTCfgTypeDef *CLUTCfg,
|
||||
uint32_t LayerIdx);
|
||||
HAL_StatusTypeDef HAL_DMA2D_CLUTLoad(DMA2D_HandleTypeDef *hdma2d, DMA2D_CLUTCfgTypeDef CLUTCfg, uint32_t LayerIdx);
|
||||
HAL_StatusTypeDef HAL_DMA2D_CLUTLoad_IT(DMA2D_HandleTypeDef *hdma2d, DMA2D_CLUTCfgTypeDef CLUTCfg, uint32_t LayerIdx);
|
||||
HAL_StatusTypeDef HAL_DMA2D_CLUTLoading_Abort(DMA2D_HandleTypeDef *hdma2d, uint32_t LayerIdx);
|
||||
HAL_StatusTypeDef HAL_DMA2D_CLUTLoading_Suspend(DMA2D_HandleTypeDef *hdma2d, uint32_t LayerIdx);
|
||||
HAL_StatusTypeDef HAL_DMA2D_CLUTLoading_Resume(DMA2D_HandleTypeDef *hdma2d, uint32_t LayerIdx);
|
||||
HAL_StatusTypeDef HAL_DMA2D_PollForTransfer(DMA2D_HandleTypeDef *hdma2d, uint32_t Timeout);
|
||||
void HAL_DMA2D_IRQHandler(DMA2D_HandleTypeDef *hdma2d);
|
||||
void HAL_DMA2D_LineEventCallback(DMA2D_HandleTypeDef *hdma2d);
|
||||
void HAL_DMA2D_CLUTLoadingCpltCallback(DMA2D_HandleTypeDef *hdma2d);
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup DMA2D_Exported_Functions_Group3 Peripheral Control functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Peripheral Control functions *************************************************/
|
||||
HAL_StatusTypeDef HAL_DMA2D_ConfigLayer(DMA2D_HandleTypeDef *hdma2d, uint32_t LayerIdx);
|
||||
HAL_StatusTypeDef HAL_DMA2D_ConfigCLUT(DMA2D_HandleTypeDef *hdma2d, DMA2D_CLUTCfgTypeDef CLUTCfg, uint32_t LayerIdx);
|
||||
HAL_StatusTypeDef HAL_DMA2D_ProgramLineEvent(DMA2D_HandleTypeDef *hdma2d, uint32_t Line);
|
||||
HAL_StatusTypeDef HAL_DMA2D_EnableDeadTime(DMA2D_HandleTypeDef *hdma2d);
|
||||
HAL_StatusTypeDef HAL_DMA2D_DisableDeadTime(DMA2D_HandleTypeDef *hdma2d);
|
||||
HAL_StatusTypeDef HAL_DMA2D_ConfigDeadTime(DMA2D_HandleTypeDef *hdma2d, uint8_t DeadTime);
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup DMA2D_Exported_Functions_Group4 Peripheral State and Error functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Peripheral State functions ***************************************************/
|
||||
HAL_DMA2D_StateTypeDef HAL_DMA2D_GetState(DMA2D_HandleTypeDef *hdma2d);
|
||||
uint32_t HAL_DMA2D_GetError(DMA2D_HandleTypeDef *hdma2d);
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private constants ---------------------------------------------------------*/
|
||||
|
||||
/** @addtogroup DMA2D_Private_Constants DMA2D Private Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup DMA2D_Maximum_Line_WaterMark DMA2D Maximum Line Watermark
|
||||
* @{
|
||||
*/
|
||||
#define DMA2D_LINE_WATERMARK_MAX DMA2D_LWR_LW /*!< DMA2D maximum line watermark */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup DMA2D_Color_Value DMA2D Color Value
|
||||
* @{
|
||||
*/
|
||||
#define DMA2D_COLOR_VALUE 0x000000FFU /*!< Color value mask */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup DMA2D_Max_Layer DMA2D Maximum Number of Layers
|
||||
* @{
|
||||
*/
|
||||
#define DMA2D_MAX_LAYER 2U /*!< DMA2D maximum number of layers */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup DMA2D_Layers DMA2D Layers
|
||||
* @{
|
||||
*/
|
||||
#define DMA2D_BACKGROUND_LAYER 0x00000000U /*!< DMA2D Background Layer (layer 0) */
|
||||
#define DMA2D_FOREGROUND_LAYER 0x00000001U /*!< DMA2D Foreground Layer (layer 1) */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup DMA2D_Offset DMA2D Offset
|
||||
* @{
|
||||
*/
|
||||
#define DMA2D_OFFSET DMA2D_FGOR_LO /*!< maximum Line Offset */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup DMA2D_Size DMA2D Size
|
||||
* @{
|
||||
*/
|
||||
#define DMA2D_PIXEL (DMA2D_NLR_PL >> 16U) /*!< DMA2D maximum number of pixels per line */
|
||||
#define DMA2D_LINE DMA2D_NLR_NL /*!< DMA2D maximum number of lines */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup DMA2D_CLUT_Size DMA2D CLUT Size
|
||||
* @{
|
||||
*/
|
||||
#define DMA2D_CLUT_SIZE (DMA2D_FGPFCCR_CS >> 8U) /*!< DMA2D maximum CLUT size */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
|
||||
/* Private macros ------------------------------------------------------------*/
|
||||
/** @defgroup DMA2D_Private_Macros DMA2D Private Macros
|
||||
* @{
|
||||
*/
|
||||
#define IS_DMA2D_LAYER(LAYER) (((LAYER) == DMA2D_BACKGROUND_LAYER)\
|
||||
|| ((LAYER) == DMA2D_FOREGROUND_LAYER))
|
||||
|
||||
#define IS_DMA2D_MODE(MODE) (((MODE) == DMA2D_M2M) || ((MODE) == DMA2D_M2M_PFC) || \
|
||||
((MODE) == DMA2D_M2M_BLEND) || ((MODE) == DMA2D_R2M))
|
||||
|
||||
#define IS_DMA2D_CMODE(MODE_ARGB) (((MODE_ARGB) == DMA2D_OUTPUT_ARGB8888) || \
|
||||
((MODE_ARGB) == DMA2D_OUTPUT_RGB888) || \
|
||||
((MODE_ARGB) == DMA2D_OUTPUT_RGB565) || \
|
||||
((MODE_ARGB) == DMA2D_OUTPUT_ARGB1555) || \
|
||||
((MODE_ARGB) == DMA2D_OUTPUT_ARGB4444))
|
||||
|
||||
#define IS_DMA2D_COLOR(COLOR) ((COLOR) <= DMA2D_COLOR_VALUE)
|
||||
#define IS_DMA2D_LINE(LINE) ((LINE) <= DMA2D_LINE)
|
||||
#define IS_DMA2D_PIXEL(PIXEL) ((PIXEL) <= DMA2D_PIXEL)
|
||||
#define IS_DMA2D_OFFSET(OOFFSET) ((OOFFSET) <= DMA2D_OFFSET)
|
||||
|
||||
#define IS_DMA2D_INPUT_COLOR_MODE(INPUT_CM) (((INPUT_CM) == DMA2D_INPUT_ARGB8888) || \
|
||||
((INPUT_CM) == DMA2D_INPUT_RGB888) || \
|
||||
((INPUT_CM) == DMA2D_INPUT_RGB565) || \
|
||||
((INPUT_CM) == DMA2D_INPUT_ARGB1555) || \
|
||||
((INPUT_CM) == DMA2D_INPUT_ARGB4444) || \
|
||||
((INPUT_CM) == DMA2D_INPUT_L8) || \
|
||||
((INPUT_CM) == DMA2D_INPUT_AL44) || \
|
||||
((INPUT_CM) == DMA2D_INPUT_AL88) || \
|
||||
((INPUT_CM) == DMA2D_INPUT_L4) || \
|
||||
((INPUT_CM) == DMA2D_INPUT_A8) || \
|
||||
((INPUT_CM) == DMA2D_INPUT_A4))
|
||||
|
||||
#define IS_DMA2D_ALPHA_MODE(AlphaMode) (((AlphaMode) == DMA2D_NO_MODIF_ALPHA) || \
|
||||
((AlphaMode) == DMA2D_REPLACE_ALPHA) || \
|
||||
((AlphaMode) == DMA2D_COMBINE_ALPHA))
|
||||
|
||||
#if defined (DMA2D_ALPHA_INV_RB_SWAP_SUPPORT)
|
||||
#define IS_DMA2D_ALPHA_INVERTED(Alpha_Inverted) (((Alpha_Inverted) == DMA2D_REGULAR_ALPHA) || \
|
||||
((Alpha_Inverted) == DMA2D_INVERTED_ALPHA))
|
||||
|
||||
#define IS_DMA2D_RB_SWAP(RB_Swap) (((RB_Swap) == DMA2D_RB_REGULAR) || \
|
||||
((RB_Swap) == DMA2D_RB_SWAP))
|
||||
#endif /* DMA2D_ALPHA_INV_RB_SWAP_SUPPORT */
|
||||
|
||||
|
||||
|
||||
|
||||
#define IS_DMA2D_CLUT_CM(CLUT_CM) (((CLUT_CM) == DMA2D_CCM_ARGB8888) || ((CLUT_CM) == DMA2D_CCM_RGB888))
|
||||
#define IS_DMA2D_CLUT_SIZE(CLUT_SIZE) ((CLUT_SIZE) <= DMA2D_CLUT_SIZE)
|
||||
#define IS_DMA2D_LINEWATERMARK(LineWatermark) ((LineWatermark) <= DMA2D_LINE_WATERMARK_MAX)
|
||||
#define IS_DMA2D_IT(IT) (((IT) == DMA2D_IT_CTC) || ((IT) == DMA2D_IT_CAE) || \
|
||||
((IT) == DMA2D_IT_TW) || ((IT) == DMA2D_IT_TC) || \
|
||||
((IT) == DMA2D_IT_TE) || ((IT) == DMA2D_IT_CE))
|
||||
#define IS_DMA2D_GET_FLAG(FLAG) (((FLAG) == DMA2D_FLAG_CTC) || ((FLAG) == DMA2D_FLAG_CAE) || \
|
||||
((FLAG) == DMA2D_FLAG_TW) || ((FLAG) == DMA2D_FLAG_TC) || \
|
||||
((FLAG) == DMA2D_FLAG_TE) || ((FLAG) == DMA2D_FLAG_CE))
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#endif /* defined (DMA2D) */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* STM32F7xx_HAL_DMA2D_H */
|
||||
183
project/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_dma_ex.h
Normal file
183
project/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_dma_ex.h
Normal file
@@ -0,0 +1,183 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f7xx_hal_dma_ex.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of DMA HAL extension module.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file in
|
||||
* the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __STM32F7xx_HAL_DMA_EX_H
|
||||
#define __STM32F7xx_HAL_DMA_EX_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f7xx_hal_def.h"
|
||||
|
||||
/** @addtogroup STM32F7xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup DMAEx
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/** @defgroup DMAEx_Exported_Types DMAEx Exported Types
|
||||
* @brief DMAEx Exported types
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief HAL DMA Memory definition
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
MEMORY0 = 0x00U, /*!< Memory 0 */
|
||||
MEMORY1 = 0x01U, /*!< Memory 1 */
|
||||
|
||||
}HAL_DMA_MemoryTypeDef;
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
|
||||
/** @defgroup DMA_Exported_Constants DMA Exported Constants
|
||||
* @brief DMA Exported constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup DMAEx_Channel_selection DMA Channel selection
|
||||
* @brief DMAEx channel selection
|
||||
* @{
|
||||
*/
|
||||
#define DMA_CHANNEL_0 0x00000000U /*!< DMA Channel 0 */
|
||||
#define DMA_CHANNEL_1 0x02000000U /*!< DMA Channel 1 */
|
||||
#define DMA_CHANNEL_2 0x04000000U /*!< DMA Channel 2 */
|
||||
#define DMA_CHANNEL_3 0x06000000U /*!< DMA Channel 3 */
|
||||
#define DMA_CHANNEL_4 0x08000000U /*!< DMA Channel 4 */
|
||||
#define DMA_CHANNEL_5 0x0A000000U /*!< DMA Channel 5 */
|
||||
#define DMA_CHANNEL_6 0x0C000000U /*!< DMA Channel 6 */
|
||||
#define DMA_CHANNEL_7 0x0E000000U /*!< DMA Channel 7 */
|
||||
#if defined (STM32F722xx) || defined (STM32F723xx) || defined (STM32F732xx) || defined (STM32F733xx) ||\
|
||||
defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) ||\
|
||||
defined (STM32F779xx) || defined (STM32F730xx)
|
||||
#define DMA_CHANNEL_8 0x10000000U /*!< DMA Channel 8 */
|
||||
#define DMA_CHANNEL_9 0x12000000U /*!< DMA Channel 9 */
|
||||
#define DMA_CHANNEL_10 0x14000000U /*!< DMA Channel 10*/
|
||||
#define DMA_CHANNEL_11 0x16000000U /*!< DMA Channel 11*/
|
||||
#define DMA_CHANNEL_12 0x18000000U /*!< DMA Channel 12*/
|
||||
#define DMA_CHANNEL_13 0x1A000000U /*!< DMA Channel 13*/
|
||||
#define DMA_CHANNEL_14 0x1C000000U /*!< DMA Channel 14*/
|
||||
#define DMA_CHANNEL_15 0x1E000000U /*!< DMA Channel 15*/
|
||||
#endif /* STM32F722xx || STM32F723xx || STM32F732xx || STM32F733xx || STM32F765xx || STM32F767xx ||
|
||||
STM32F769xx || STM32F777xx || STM32F779xx || STM32F730xx */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @defgroup DMAEx_Exported_Functions DMAEx Exported Functions
|
||||
* @brief DMAEx Exported functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup DMAEx_Exported_Functions_Group1 Extended features functions
|
||||
* @brief Extended features functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* IO operation functions *******************************************************/
|
||||
HAL_StatusTypeDef HAL_DMAEx_MultiBufferStart(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t SecondMemAddress, uint32_t DataLength);
|
||||
HAL_StatusTypeDef HAL_DMAEx_MultiBufferStart_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t SecondMemAddress, uint32_t DataLength);
|
||||
HAL_StatusTypeDef HAL_DMAEx_ChangeMemory(DMA_HandleTypeDef *hdma, uint32_t Address, HAL_DMA_MemoryTypeDef memory);
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private macros ------------------------------------------------------------*/
|
||||
/** @defgroup DMAEx_Private_Macros DMA Private Macros
|
||||
* @brief DMAEx private macros
|
||||
* @{
|
||||
*/
|
||||
#if defined (STM32F722xx) || defined (STM32F723xx) || defined (STM32F732xx) || defined (STM32F733xx) ||\
|
||||
defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) ||\
|
||||
defined (STM32F779xx) || defined (STM32F730xx)
|
||||
#define IS_DMA_CHANNEL(CHANNEL) (((CHANNEL) == DMA_CHANNEL_0) || \
|
||||
((CHANNEL) == DMA_CHANNEL_1) || \
|
||||
((CHANNEL) == DMA_CHANNEL_2) || \
|
||||
((CHANNEL) == DMA_CHANNEL_3) || \
|
||||
((CHANNEL) == DMA_CHANNEL_4) || \
|
||||
((CHANNEL) == DMA_CHANNEL_5) || \
|
||||
((CHANNEL) == DMA_CHANNEL_6) || \
|
||||
((CHANNEL) == DMA_CHANNEL_7) || \
|
||||
((CHANNEL) == DMA_CHANNEL_8) || \
|
||||
((CHANNEL) == DMA_CHANNEL_9) || \
|
||||
((CHANNEL) == DMA_CHANNEL_10) || \
|
||||
((CHANNEL) == DMA_CHANNEL_11) || \
|
||||
((CHANNEL) == DMA_CHANNEL_12) || \
|
||||
((CHANNEL) == DMA_CHANNEL_13) || \
|
||||
((CHANNEL) == DMA_CHANNEL_14) || \
|
||||
((CHANNEL) == DMA_CHANNEL_15))
|
||||
#else
|
||||
#define IS_DMA_CHANNEL(CHANNEL) (((CHANNEL) == DMA_CHANNEL_0) || \
|
||||
((CHANNEL) == DMA_CHANNEL_1) || \
|
||||
((CHANNEL) == DMA_CHANNEL_2) || \
|
||||
((CHANNEL) == DMA_CHANNEL_3) || \
|
||||
((CHANNEL) == DMA_CHANNEL_4) || \
|
||||
((CHANNEL) == DMA_CHANNEL_5) || \
|
||||
((CHANNEL) == DMA_CHANNEL_6) || \
|
||||
((CHANNEL) == DMA_CHANNEL_7))
|
||||
#endif /* STM32F722xx || STM32F723xx || STM32F732xx || STM32F733xx || STM32F765xx || STM32F767xx ||
|
||||
STM32F769xx || STM32F777xx || STM32F779xx || STM32F730xx*/
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private functions ---------------------------------------------------------*/
|
||||
/** @defgroup DMAEx_Private_Functions DMAEx Private Functions
|
||||
* @brief DMAEx Private functions
|
||||
* @{
|
||||
*/
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __STM32F7xx_HAL_DMA_H */
|
||||
|
||||
1377
project/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_dsi.h
Normal file
1377
project/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_dsi.h
Normal file
File diff suppressed because it is too large
Load Diff
2144
project/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_eth.h
Normal file
2144
project/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_eth.h
Normal file
File diff suppressed because it is too large
Load Diff
317
project/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_exti.h
Normal file
317
project/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_exti.h
Normal file
@@ -0,0 +1,317 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f7xx_hal_exti.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of EXTI HAL module.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2018 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef STM32F7xx_HAL_EXTI_H
|
||||
#define STM32F7xx_HAL_EXTI_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f7xx_hal_def.h"
|
||||
|
||||
/** @addtogroup STM32F7xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup EXTI EXTI
|
||||
* @brief EXTI HAL module driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
|
||||
/** @defgroup EXTI_Exported_Types EXTI Exported Types
|
||||
* @{
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
HAL_EXTI_COMMON_CB_ID = 0x00U
|
||||
} EXTI_CallbackIDTypeDef;
|
||||
|
||||
/**
|
||||
* @brief EXTI Handle structure definition
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint32_t Line; /*!< Exti line number */
|
||||
void (* PendingCallback)(void); /*!< Exti pending callback */
|
||||
} EXTI_HandleTypeDef;
|
||||
|
||||
/**
|
||||
* @brief EXTI Configuration structure definition
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint32_t Line; /*!< The Exti line to be configured. This parameter
|
||||
can be a value of @ref EXTI_Line */
|
||||
uint32_t Mode; /*!< The Exit Mode to be configured for a core.
|
||||
This parameter can be a combination of @ref EXTI_Mode */
|
||||
uint32_t Trigger; /*!< The Exti Trigger to be configured. This parameter
|
||||
can be a value of @ref EXTI_Trigger */
|
||||
uint32_t GPIOSel; /*!< The Exti GPIO multiplexer selection to be configured.
|
||||
This parameter is only possible for line 0 to 15. It
|
||||
can be a value of @ref EXTI_GPIOSel */
|
||||
} EXTI_ConfigTypeDef;
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/** @defgroup EXTI_Exported_Constants EXTI Exported Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup EXTI_Line EXTI Line
|
||||
* @{
|
||||
*/
|
||||
#define EXTI_LINE_0 (EXTI_GPIO | 0x00u) /*!< External interrupt line 0 */
|
||||
#define EXTI_LINE_1 (EXTI_GPIO | 0x01u) /*!< External interrupt line 1 */
|
||||
#define EXTI_LINE_2 (EXTI_GPIO | 0x02u) /*!< External interrupt line 2 */
|
||||
#define EXTI_LINE_3 (EXTI_GPIO | 0x03u) /*!< External interrupt line 3 */
|
||||
#define EXTI_LINE_4 (EXTI_GPIO | 0x04u) /*!< External interrupt line 4 */
|
||||
#define EXTI_LINE_5 (EXTI_GPIO | 0x05u) /*!< External interrupt line 5 */
|
||||
#define EXTI_LINE_6 (EXTI_GPIO | 0x06u) /*!< External interrupt line 6 */
|
||||
#define EXTI_LINE_7 (EXTI_GPIO | 0x07u) /*!< External interrupt line 7 */
|
||||
#define EXTI_LINE_8 (EXTI_GPIO | 0x08u) /*!< External interrupt line 8 */
|
||||
#define EXTI_LINE_9 (EXTI_GPIO | 0x09u) /*!< External interrupt line 9 */
|
||||
#define EXTI_LINE_10 (EXTI_GPIO | 0x0Au) /*!< External interrupt line 10 */
|
||||
#define EXTI_LINE_11 (EXTI_GPIO | 0x0Bu) /*!< External interrupt line 11 */
|
||||
#define EXTI_LINE_12 (EXTI_GPIO | 0x0Cu) /*!< External interrupt line 12 */
|
||||
#define EXTI_LINE_13 (EXTI_GPIO | 0x0Du) /*!< External interrupt line 13 */
|
||||
#define EXTI_LINE_14 (EXTI_GPIO | 0x0Eu) /*!< External interrupt line 14 */
|
||||
#define EXTI_LINE_15 (EXTI_GPIO | 0x0Fu) /*!< External interrupt line 15 */
|
||||
#define EXTI_LINE_16 (EXTI_CONFIG | 0x10u) /*!< External interrupt line 16 Connected to the PVD Output */
|
||||
#define EXTI_LINE_17 (EXTI_CONFIG | 0x11u) /*!< External interrupt line 17 Connected to the RTC Alarm event */
|
||||
#define EXTI_LINE_18 (EXTI_CONFIG | 0x12u) /*!< External interrupt line 18 Connected to the USB OTG FS Wakeup from suspend event */
|
||||
#if defined(ETH)
|
||||
#define EXTI_LINE_19 (EXTI_CONFIG | 0x13u) /*!< External interrupt line 19 Connected to the Ethernet Wakeup event */
|
||||
#else
|
||||
#define EXTI_LINE_19 (EXTI_RESERVED | 0x13u) /*!< No interrupt supported in this line */
|
||||
#endif /* ETH */
|
||||
#define EXTI_LINE_20 (EXTI_CONFIG | 0x14u) /*!< External interrupt line 20 Connected to the USB OTG HS (configured in FS) Wakeup event */
|
||||
#define EXTI_LINE_21 (EXTI_CONFIG | 0x15u) /*!< External interrupt line 21 Connected to the RTC Tamper and Time Stamp events */
|
||||
#define EXTI_LINE_22 (EXTI_CONFIG | 0x16u) /*!< External interrupt line 22 Connected to the RTC Wakeup event */
|
||||
#define EXTI_LINE_23 (EXTI_CONFIG | 0x17u) /*!< External interrupt line 23 Connected to the LPTIM Wakeup event */
|
||||
#if defined(EXTI_IMR_IM24)
|
||||
#define EXTI_LINE_24 (EXTI_CONFIG | 0x18u) /*!< External interrupt line 24 Connected to the MDIO Slave global Interrupt Wakeup event */
|
||||
#endif /* EXTI_IMR_IM24 */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup EXTI_Mode EXTI Mode
|
||||
* @{
|
||||
*/
|
||||
#define EXTI_MODE_NONE 0x00000000u
|
||||
#define EXTI_MODE_INTERRUPT 0x00000001u
|
||||
#define EXTI_MODE_EVENT 0x00000002u
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup EXTI_Trigger EXTI Trigger
|
||||
* @{
|
||||
*/
|
||||
|
||||
#define EXTI_TRIGGER_NONE 0x00000000u
|
||||
#define EXTI_TRIGGER_RISING 0x00000001u
|
||||
#define EXTI_TRIGGER_FALLING 0x00000002u
|
||||
#define EXTI_TRIGGER_RISING_FALLING (EXTI_TRIGGER_RISING | EXTI_TRIGGER_FALLING)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup EXTI_GPIOSel EXTI GPIOSel
|
||||
* @brief
|
||||
* @{
|
||||
*/
|
||||
#define EXTI_GPIOA 0x00000000u
|
||||
#define EXTI_GPIOB 0x00000001u
|
||||
#define EXTI_GPIOC 0x00000002u
|
||||
#define EXTI_GPIOD 0x00000003u
|
||||
#define EXTI_GPIOE 0x00000004u
|
||||
#define EXTI_GPIOF 0x00000005u
|
||||
#define EXTI_GPIOG 0x00000006u
|
||||
#define EXTI_GPIOH 0x00000007u
|
||||
#define EXTI_GPIOI 0x00000008u
|
||||
#define EXTI_GPIOJ 0x00000009u
|
||||
#if defined (GPIOK)
|
||||
#define EXTI_GPIOK 0x0000000Au
|
||||
#endif /* GPIOK */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/** @defgroup EXTI_Exported_Macros EXTI Exported Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private constants --------------------------------------------------------*/
|
||||
/** @defgroup EXTI_Private_Constants EXTI Private Constants
|
||||
* @{
|
||||
*/
|
||||
/**
|
||||
* @brief EXTI Line property definition
|
||||
*/
|
||||
#define EXTI_PROPERTY_SHIFT 24u
|
||||
#define EXTI_CONFIG (0x02uL << EXTI_PROPERTY_SHIFT)
|
||||
#define EXTI_GPIO ((0x04uL << EXTI_PROPERTY_SHIFT) | EXTI_CONFIG)
|
||||
#define EXTI_RESERVED (0x08uL << EXTI_PROPERTY_SHIFT)
|
||||
#define EXTI_PROPERTY_MASK (EXTI_CONFIG | EXTI_GPIO)
|
||||
|
||||
/**
|
||||
* @brief EXTI bit usage
|
||||
*/
|
||||
#define EXTI_PIN_MASK 0x0000001Fu
|
||||
|
||||
/**
|
||||
* @brief EXTI Mask for interrupt & event mode
|
||||
*/
|
||||
#define EXTI_MODE_MASK (EXTI_MODE_EVENT | EXTI_MODE_INTERRUPT)
|
||||
|
||||
/**
|
||||
* @brief EXTI Mask for trigger possibilities
|
||||
*/
|
||||
#define EXTI_TRIGGER_MASK (EXTI_TRIGGER_RISING | EXTI_TRIGGER_FALLING)
|
||||
|
||||
/**
|
||||
* @brief EXTI Line number
|
||||
*/
|
||||
#if defined(EXTI_IMR_IM24)
|
||||
#define EXTI_LINE_NB 25u
|
||||
#else
|
||||
#define EXTI_LINE_NB 24u
|
||||
#endif /* EXTI_IMR_IM24 */
|
||||
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private macros ------------------------------------------------------------*/
|
||||
/** @defgroup EXTI_Private_Macros EXTI Private Macros
|
||||
* @{
|
||||
*/
|
||||
#define IS_EXTI_LINE(__EXTI_LINE__) ((((__EXTI_LINE__) & ~(EXTI_PROPERTY_MASK | EXTI_PIN_MASK)) == 0x00u) && \
|
||||
((((__EXTI_LINE__) & EXTI_PROPERTY_MASK) == EXTI_CONFIG) || \
|
||||
(((__EXTI_LINE__) & EXTI_PROPERTY_MASK) == EXTI_GPIO)) && \
|
||||
(((__EXTI_LINE__) & EXTI_PIN_MASK) < EXTI_LINE_NB))
|
||||
|
||||
#define IS_EXTI_MODE(__EXTI_LINE__) ((((__EXTI_LINE__) & EXTI_MODE_MASK) != 0x00u) && \
|
||||
(((__EXTI_LINE__) & ~EXTI_MODE_MASK) == 0x00u))
|
||||
|
||||
#define IS_EXTI_TRIGGER(__EXTI_LINE__) (((__EXTI_LINE__) & ~EXTI_TRIGGER_MASK) == 0x00u)
|
||||
|
||||
#define IS_EXTI_PENDING_EDGE(__EXTI_LINE__) (((__EXTI_LINE__) == EXTI_TRIGGER_FALLING) || \
|
||||
((__EXTI_LINE__) == EXTI_TRIGGER_RISING) || \
|
||||
((__EXTI_LINE__) == EXTI_TRIGGER_RISING_FALLING))
|
||||
|
||||
#define IS_EXTI_CONFIG_LINE(__EXTI_LINE__) (((__EXTI_LINE__) & EXTI_CONFIG) != 0x00u)
|
||||
|
||||
#if defined (GPIOK)
|
||||
#define IS_EXTI_GPIO_PORT(__PORT__) (((__PORT__) == EXTI_GPIOA) || \
|
||||
((__PORT__) == EXTI_GPIOB) || \
|
||||
((__PORT__) == EXTI_GPIOC) || \
|
||||
((__PORT__) == EXTI_GPIOD) || \
|
||||
((__PORT__) == EXTI_GPIOE) || \
|
||||
((__PORT__) == EXTI_GPIOF) || \
|
||||
((__PORT__) == EXTI_GPIOG) || \
|
||||
((__PORT__) == EXTI_GPIOH) || \
|
||||
((__PORT__) == EXTI_GPIOI) || \
|
||||
((__PORT__) == EXTI_GPIOJ) || \
|
||||
((__PORT__) == EXTI_GPIOK))
|
||||
#else
|
||||
#define IS_EXTI_GPIO_PORT(__PORT__) (((__PORT__) == EXTI_GPIOA) || \
|
||||
((__PORT__) == EXTI_GPIOB) || \
|
||||
((__PORT__) == EXTI_GPIOC) || \
|
||||
((__PORT__) == EXTI_GPIOD) || \
|
||||
((__PORT__) == EXTI_GPIOE) || \
|
||||
((__PORT__) == EXTI_GPIOF) || \
|
||||
((__PORT__) == EXTI_GPIOG) || \
|
||||
((__PORT__) == EXTI_GPIOH) || \
|
||||
((__PORT__) == EXTI_GPIOI) || \
|
||||
((__PORT__) == EXTI_GPIOJ))
|
||||
#endif /* GPIOK */
|
||||
|
||||
#define IS_EXTI_GPIO_PIN(__PIN__) ((__PIN__) < 16U)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @defgroup EXTI_Exported_Functions EXTI Exported Functions
|
||||
* @brief EXTI Exported Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup EXTI_Exported_Functions_Group1 Configuration functions
|
||||
* @brief Configuration functions
|
||||
* @{
|
||||
*/
|
||||
/* Configuration functions ****************************************************/
|
||||
HAL_StatusTypeDef HAL_EXTI_SetConfigLine(EXTI_HandleTypeDef *hexti, EXTI_ConfigTypeDef *pExtiConfig);
|
||||
HAL_StatusTypeDef HAL_EXTI_GetConfigLine(EXTI_HandleTypeDef *hexti, EXTI_ConfigTypeDef *pExtiConfig);
|
||||
HAL_StatusTypeDef HAL_EXTI_ClearConfigLine(EXTI_HandleTypeDef *hexti);
|
||||
HAL_StatusTypeDef HAL_EXTI_RegisterCallback(EXTI_HandleTypeDef *hexti, EXTI_CallbackIDTypeDef CallbackID, void (*pPendingCbfn)(void));
|
||||
HAL_StatusTypeDef HAL_EXTI_GetHandle(EXTI_HandleTypeDef *hexti, uint32_t ExtiLine);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup EXTI_Exported_Functions_Group2 IO operation functions
|
||||
* @brief IO operation functions
|
||||
* @{
|
||||
*/
|
||||
/* IO operation functions *****************************************************/
|
||||
void HAL_EXTI_IRQHandler(EXTI_HandleTypeDef *hexti);
|
||||
uint32_t HAL_EXTI_GetPending(EXTI_HandleTypeDef *hexti, uint32_t Edge);
|
||||
void HAL_EXTI_ClearPending(EXTI_HandleTypeDef *hexti, uint32_t Edge);
|
||||
void HAL_EXTI_GenerateSWI(EXTI_HandleTypeDef *hexti);
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* STM32F7xx_HAL_EXTI_H */
|
||||
|
||||
415
project/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_flash.h
Normal file
415
project/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_flash.h
Normal file
@@ -0,0 +1,415 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f7xx_hal_flash.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of FLASH HAL module.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file in
|
||||
* the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __STM32F7xx_HAL_FLASH_H
|
||||
#define __STM32F7xx_HAL_FLASH_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f7xx_hal_def.h"
|
||||
|
||||
/** @addtogroup STM32F7xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup FLASH
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/** @defgroup FLASH_Exported_Types FLASH Exported Types
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief FLASH Procedure structure definition
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
FLASH_PROC_NONE = 0U,
|
||||
FLASH_PROC_SECTERASE,
|
||||
FLASH_PROC_MASSERASE,
|
||||
FLASH_PROC_PROGRAM
|
||||
} FLASH_ProcedureTypeDef;
|
||||
|
||||
|
||||
/**
|
||||
* @brief FLASH handle Structure definition
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
__IO FLASH_ProcedureTypeDef ProcedureOnGoing; /* Internal variable to indicate which procedure is ongoing or not in IT context */
|
||||
|
||||
__IO uint32_t NbSectorsToErase; /* Internal variable to save the remaining sectors to erase in IT context */
|
||||
|
||||
__IO uint8_t VoltageForErase; /* Internal variable to provide voltage range selected by user in IT context */
|
||||
|
||||
__IO uint32_t Sector; /* Internal variable to define the current sector which is erasing */
|
||||
|
||||
__IO uint32_t Address; /* Internal variable to save address selected for program */
|
||||
|
||||
HAL_LockTypeDef Lock; /* FLASH locking object */
|
||||
|
||||
__IO uint32_t ErrorCode; /* FLASH error code */
|
||||
|
||||
}FLASH_ProcessTypeDef;
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/** @defgroup FLASH_Exported_Constants FLASH Exported Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup FLASH_Error_Code FLASH Error Code
|
||||
* @brief FLASH Error Code
|
||||
* @{
|
||||
*/
|
||||
#define HAL_FLASH_ERROR_NONE ((uint32_t)0x00000000U) /*!< No error */
|
||||
#define HAL_FLASH_ERROR_ERS ((uint32_t)0x00000002U) /*!< Programming Sequence error */
|
||||
#define HAL_FLASH_ERROR_PGP ((uint32_t)0x00000004U) /*!< Programming Parallelism error */
|
||||
#define HAL_FLASH_ERROR_PGA ((uint32_t)0x00000008U) /*!< Programming Alignment error */
|
||||
#define HAL_FLASH_ERROR_WRP ((uint32_t)0x00000010U) /*!< Write protection error */
|
||||
#define HAL_FLASH_ERROR_OPERATION ((uint32_t)0x00000020U) /*!< Operation Error */
|
||||
#define HAL_FLASH_ERROR_RD ((uint32_t)0x00000040U) /*!< Read Protection Error */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup FLASH_Type_Program FLASH Type Program
|
||||
* @{
|
||||
*/
|
||||
#define FLASH_TYPEPROGRAM_BYTE ((uint32_t)0x00U) /*!< Program byte (8-bit) at a specified address */
|
||||
#define FLASH_TYPEPROGRAM_HALFWORD ((uint32_t)0x01U) /*!< Program a half-word (16-bit) at a specified address */
|
||||
#define FLASH_TYPEPROGRAM_WORD ((uint32_t)0x02U) /*!< Program a word (32-bit) at a specified address */
|
||||
#define FLASH_TYPEPROGRAM_DOUBLEWORD ((uint32_t)0x03U) /*!< Program a double word (64-bit) at a specified address */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup FLASH_Flag_definition FLASH Flag definition
|
||||
* @brief Flag definition
|
||||
* @{
|
||||
*/
|
||||
#define FLASH_FLAG_EOP FLASH_SR_EOP /*!< FLASH End of Operation flag */
|
||||
#define FLASH_FLAG_OPERR FLASH_SR_OPERR /*!< FLASH operation Error flag */
|
||||
#define FLASH_FLAG_WRPERR FLASH_SR_WRPERR /*!< FLASH Write protected error flag */
|
||||
#define FLASH_FLAG_PGAERR FLASH_SR_PGAERR /*!< FLASH Programming Alignment error flag */
|
||||
#define FLASH_FLAG_PGPERR FLASH_SR_PGPERR /*!< FLASH Programming Parallelism error flag */
|
||||
#define FLASH_FLAG_ERSERR FLASH_SR_ERSERR /*!< FLASH Erasing Sequence error flag */
|
||||
#define FLASH_FLAG_BSY FLASH_SR_BSY /*!< FLASH Busy flag */
|
||||
|
||||
#if defined (FLASH_OPTCR2_PCROP)
|
||||
#define FLASH_FLAG_RDERR FLASH_SR_RDERR /*!< FLASH Read protection error flag */
|
||||
#define FLASH_FLAG_ALL_ERRORS (FLASH_FLAG_OPERR | FLASH_FLAG_WRPERR | FLASH_FLAG_PGAERR | \
|
||||
FLASH_FLAG_PGPERR | FLASH_FLAG_ERSERR | FLASH_FLAG_RDERR)
|
||||
#else
|
||||
#define FLASH_FLAG_ALL_ERRORS (FLASH_FLAG_OPERR | FLASH_FLAG_WRPERR | FLASH_FLAG_PGAERR | \
|
||||
FLASH_FLAG_PGPERR | FLASH_FLAG_ERSERR)
|
||||
#endif /* FLASH_OPTCR2_PCROP */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup FLASH_Interrupt_definition FLASH Interrupt definition
|
||||
* @brief FLASH Interrupt definition
|
||||
* @{
|
||||
*/
|
||||
#define FLASH_IT_EOP FLASH_CR_EOPIE /*!< End of FLASH Operation Interrupt source */
|
||||
#define FLASH_IT_ERR ((uint32_t)0x02000000U) /*!< Error Interrupt source */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup FLASH_Program_Parallelism FLASH Program Parallelism
|
||||
* @{
|
||||
*/
|
||||
#define FLASH_PSIZE_BYTE ((uint32_t)0x00000000U)
|
||||
#define FLASH_PSIZE_HALF_WORD ((uint32_t)FLASH_CR_PSIZE_0)
|
||||
#define FLASH_PSIZE_WORD ((uint32_t)FLASH_CR_PSIZE_1)
|
||||
#define FLASH_PSIZE_DOUBLE_WORD ((uint32_t)FLASH_CR_PSIZE)
|
||||
#define CR_PSIZE_MASK ((uint32_t)0xFFFFFCFFU)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup FLASH_Keys FLASH Keys
|
||||
* @{
|
||||
*/
|
||||
#define FLASH_KEY1 ((uint32_t)0x45670123U)
|
||||
#define FLASH_KEY2 ((uint32_t)0xCDEF89ABU)
|
||||
#define FLASH_OPT_KEY1 ((uint32_t)0x08192A3BU)
|
||||
#define FLASH_OPT_KEY2 ((uint32_t)0x4C5D6E7FU)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup FLASH_Sectors FLASH Sectors
|
||||
* @{
|
||||
*/
|
||||
#if (FLASH_SECTOR_TOTAL == 2)
|
||||
#define FLASH_SECTOR_0 ((uint32_t)0U) /*!< Sector Number 0 */
|
||||
#define FLASH_SECTOR_1 ((uint32_t)1U) /*!< Sector Number 1 */
|
||||
#elif (FLASH_SECTOR_TOTAL == 4)
|
||||
#define FLASH_SECTOR_0 ((uint32_t)0U) /*!< Sector Number 0 */
|
||||
#define FLASH_SECTOR_1 ((uint32_t)1U) /*!< Sector Number 1 */
|
||||
#define FLASH_SECTOR_2 ((uint32_t)2U) /*!< Sector Number 2 */
|
||||
#define FLASH_SECTOR_3 ((uint32_t)3U) /*!< Sector Number 3 */
|
||||
#else
|
||||
#define FLASH_SECTOR_0 ((uint32_t)0U) /*!< Sector Number 0 */
|
||||
#define FLASH_SECTOR_1 ((uint32_t)1U) /*!< Sector Number 1 */
|
||||
#define FLASH_SECTOR_2 ((uint32_t)2U) /*!< Sector Number 2 */
|
||||
#define FLASH_SECTOR_3 ((uint32_t)3U) /*!< Sector Number 3 */
|
||||
#define FLASH_SECTOR_4 ((uint32_t)4U) /*!< Sector Number 4 */
|
||||
#define FLASH_SECTOR_5 ((uint32_t)5U) /*!< Sector Number 5 */
|
||||
#define FLASH_SECTOR_6 ((uint32_t)6U) /*!< Sector Number 6 */
|
||||
#define FLASH_SECTOR_7 ((uint32_t)7U) /*!< Sector Number 7 */
|
||||
#endif /* FLASH_SECTOR_TOTAL */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/** @defgroup FLASH_Exported_Macros FLASH Exported Macros
|
||||
* @{
|
||||
*/
|
||||
/**
|
||||
* @brief Set the FLASH Latency.
|
||||
* @param __LATENCY__ FLASH Latency
|
||||
* The value of this parameter depend on device used within the same series
|
||||
* @retval none
|
||||
*/
|
||||
#define __HAL_FLASH_SET_LATENCY(__LATENCY__) \
|
||||
MODIFY_REG(FLASH->ACR, FLASH_ACR_LATENCY, (uint32_t)(__LATENCY__))
|
||||
|
||||
/**
|
||||
* @brief Get the FLASH Latency.
|
||||
* @retval FLASH Latency
|
||||
* The value of this parameter depend on device used within the same series
|
||||
*/
|
||||
#define __HAL_FLASH_GET_LATENCY() (READ_BIT((FLASH->ACR), FLASH_ACR_LATENCY))
|
||||
|
||||
/**
|
||||
* @brief Enable the FLASH prefetch buffer.
|
||||
* @retval none
|
||||
*/
|
||||
#define __HAL_FLASH_PREFETCH_BUFFER_ENABLE() (FLASH->ACR |= FLASH_ACR_PRFTEN)
|
||||
|
||||
/**
|
||||
* @brief Disable the FLASH prefetch buffer.
|
||||
* @retval none
|
||||
*/
|
||||
#define __HAL_FLASH_PREFETCH_BUFFER_DISABLE() (FLASH->ACR &= (~FLASH_ACR_PRFTEN))
|
||||
|
||||
/**
|
||||
* @brief Enable the FLASH Adaptive Real-Time memory accelerator.
|
||||
* @note The ART accelerator is available only for flash access on ITCM interface.
|
||||
* @retval none
|
||||
*/
|
||||
#define __HAL_FLASH_ART_ENABLE() SET_BIT(FLASH->ACR, FLASH_ACR_ARTEN)
|
||||
|
||||
/**
|
||||
* @brief Disable the FLASH Adaptive Real-Time memory accelerator.
|
||||
* @retval none
|
||||
*/
|
||||
#define __HAL_FLASH_ART_DISABLE() CLEAR_BIT(FLASH->ACR, FLASH_ACR_ARTEN)
|
||||
|
||||
/**
|
||||
* @brief Resets the FLASH Adaptive Real-Time memory accelerator.
|
||||
* @note This function must be used only when the Adaptive Real-Time memory accelerator
|
||||
* is disabled.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_FLASH_ART_RESET() (FLASH->ACR |= FLASH_ACR_ARTRST)
|
||||
|
||||
/**
|
||||
* @brief Enable the specified FLASH interrupt.
|
||||
* @param __INTERRUPT__ FLASH interrupt
|
||||
* This parameter can be any combination of the following values:
|
||||
* @arg FLASH_IT_EOP: End of FLASH Operation Interrupt
|
||||
* @arg FLASH_IT_ERR: Error Interrupt
|
||||
* @retval none
|
||||
*/
|
||||
#define __HAL_FLASH_ENABLE_IT(__INTERRUPT__) (FLASH->CR |= (__INTERRUPT__))
|
||||
|
||||
/**
|
||||
* @brief Disable the specified FLASH interrupt.
|
||||
* @param __INTERRUPT__ FLASH interrupt
|
||||
* This parameter can be any combination of the following values:
|
||||
* @arg FLASH_IT_EOP: End of FLASH Operation Interrupt
|
||||
* @arg FLASH_IT_ERR: Error Interrupt
|
||||
* @retval none
|
||||
*/
|
||||
#define __HAL_FLASH_DISABLE_IT(__INTERRUPT__) (FLASH->CR &= ~(uint32_t)(__INTERRUPT__))
|
||||
|
||||
/**
|
||||
* @brief Get the specified FLASH flag status.
|
||||
* @param __FLAG__ specifies the FLASH flag to check.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg FLASH_FLAG_EOP : FLASH End of Operation flag
|
||||
* @arg FLASH_FLAG_OPERR : FLASH operation Error flag
|
||||
* @arg FLASH_FLAG_WRPERR: FLASH Write protected error flag
|
||||
* @arg FLASH_FLAG_PGAERR: FLASH Programming Alignment error flag
|
||||
* @arg FLASH_FLAG_PGPERR: FLASH Programming Parallelism error flag
|
||||
* @arg FLASH_FLAG_ERSERR : FLASH Erasing Sequence error flag
|
||||
* @arg FLASH_FLAG_BSY : FLASH Busy flag
|
||||
* @retval The new state of __FLAG__ (SET or RESET).
|
||||
*/
|
||||
#define __HAL_FLASH_GET_FLAG(__FLAG__) ((FLASH->SR & (__FLAG__)))
|
||||
|
||||
/**
|
||||
* @brief Clear the specified FLASH flag.
|
||||
* @param __FLAG__ specifies the FLASH flags to clear.
|
||||
* This parameter can be any combination of the following values:
|
||||
* @arg FLASH_FLAG_EOP : FLASH End of Operation flag
|
||||
* @arg FLASH_FLAG_OPERR : FLASH operation Error flag
|
||||
* @arg FLASH_FLAG_WRPERR: FLASH Write protected error flag
|
||||
* @arg FLASH_FLAG_PGAERR: FLASH Programming Alignment error flag
|
||||
* @arg FLASH_FLAG_PGPERR: FLASH Programming Parallelism error flag
|
||||
* @arg FLASH_FLAG_ERSERR : FLASH Erasing Sequence error flag
|
||||
* @retval none
|
||||
*/
|
||||
#define __HAL_FLASH_CLEAR_FLAG(__FLAG__) (FLASH->SR = (__FLAG__))
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Include FLASH HAL Extension module */
|
||||
#include "stm32f7xx_hal_flash_ex.h"
|
||||
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @addtogroup FLASH_Exported_Functions
|
||||
* @{
|
||||
*/
|
||||
/** @addtogroup FLASH_Exported_Functions_Group1
|
||||
* @{
|
||||
*/
|
||||
/* Program operation functions ***********************************************/
|
||||
HAL_StatusTypeDef HAL_FLASH_Program(uint32_t TypeProgram, uint32_t Address, uint64_t Data);
|
||||
HAL_StatusTypeDef HAL_FLASH_Program_IT(uint32_t TypeProgram, uint32_t Address, uint64_t Data);
|
||||
/* FLASH IRQ handler method */
|
||||
void HAL_FLASH_IRQHandler(void);
|
||||
/* Callbacks in non blocking modes */
|
||||
void HAL_FLASH_EndOfOperationCallback(uint32_t ReturnValue);
|
||||
void HAL_FLASH_OperationErrorCallback(uint32_t ReturnValue);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup FLASH_Exported_Functions_Group2
|
||||
* @{
|
||||
*/
|
||||
/* Peripheral Control functions **********************************************/
|
||||
HAL_StatusTypeDef HAL_FLASH_Unlock(void);
|
||||
HAL_StatusTypeDef HAL_FLASH_Lock(void);
|
||||
HAL_StatusTypeDef HAL_FLASH_OB_Unlock(void);
|
||||
HAL_StatusTypeDef HAL_FLASH_OB_Lock(void);
|
||||
/* Option bytes control */
|
||||
HAL_StatusTypeDef HAL_FLASH_OB_Launch(void);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup FLASH_Exported_Functions_Group3
|
||||
* @{
|
||||
*/
|
||||
/* Peripheral State functions ************************************************/
|
||||
uint32_t HAL_FLASH_GetError(void);
|
||||
HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/* Private types -------------------------------------------------------------*/
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
/** @defgroup FLASH_Private_Variables FLASH Private Variables
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/* Private constants ---------------------------------------------------------*/
|
||||
/** @defgroup FLASH_Private_Constants FLASH Private Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief OPTCR register byte 1 (Bits[15:8]) base address
|
||||
*/
|
||||
#define OPTCR_BYTE1_ADDRESS ((uint32_t)0x40023C15)
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private macros ------------------------------------------------------------*/
|
||||
/** @defgroup FLASH_Private_Macros FLASH Private Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup FLASH_IS_FLASH_Definitions FLASH Private macros to check input parameters
|
||||
* @{
|
||||
*/
|
||||
#define IS_FLASH_TYPEPROGRAM(VALUE)(((VALUE) == FLASH_TYPEPROGRAM_BYTE) || \
|
||||
((VALUE) == FLASH_TYPEPROGRAM_HALFWORD) || \
|
||||
((VALUE) == FLASH_TYPEPROGRAM_WORD) || \
|
||||
((VALUE) == FLASH_TYPEPROGRAM_DOUBLEWORD))
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private functions ---------------------------------------------------------*/
|
||||
/** @defgroup FLASH_Private_Functions FLASH Private Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __STM32F7xx_HAL_FLASH_H */
|
||||
|
||||
@@ -0,0 +1,697 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f7xx_hal_flash_ex.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of FLASH HAL Extension module.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file in
|
||||
* the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __STM32F7xx_HAL_FLASH_EX_H
|
||||
#define __STM32F7xx_HAL_FLASH_EX_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f7xx_hal_def.h"
|
||||
|
||||
/** @addtogroup STM32F7xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup FLASHEx
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/** @defgroup FLASHEx_Exported_Types FLASH Exported Types
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief FLASH Erase structure definition
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint32_t TypeErase; /*!< Mass erase or sector Erase.
|
||||
This parameter can be a value of @ref FLASHEx_Type_Erase */
|
||||
|
||||
#if defined (FLASH_OPTCR_nDBANK)
|
||||
uint32_t Banks; /*!< Select banks to erase when Mass erase is enabled.
|
||||
This parameter must be a value of @ref FLASHEx_Banks */
|
||||
#endif /* FLASH_OPTCR_nDBANK */
|
||||
|
||||
uint32_t Sector; /*!< Initial FLASH sector to erase when Mass erase is disabled
|
||||
This parameter must be a value of @ref FLASHEx_Sectors */
|
||||
|
||||
uint32_t NbSectors; /*!< Number of sectors to be erased.
|
||||
This parameter must be a value between 1 and (max number of sectors - value of Initial sector)*/
|
||||
|
||||
uint32_t VoltageRange;/*!< The device voltage range which defines the erase parallelism
|
||||
This parameter must be a value of @ref FLASHEx_Voltage_Range */
|
||||
|
||||
} FLASH_EraseInitTypeDef;
|
||||
|
||||
/**
|
||||
* @brief FLASH Option Bytes Program structure definition
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint32_t OptionType; /*!< Option byte to be configured.
|
||||
This parameter can be a value of @ref FLASHEx_Option_Type */
|
||||
|
||||
uint32_t WRPState; /*!< Write protection activation or deactivation.
|
||||
This parameter can be a value of @ref FLASHEx_WRP_State */
|
||||
|
||||
uint32_t WRPSector; /*!< Specifies the sector(s) to be write protected.
|
||||
The value of this parameter depend on device used within the same series */
|
||||
|
||||
uint32_t RDPLevel; /*!< Set the read protection level.
|
||||
This parameter can be a value of @ref FLASHEx_Option_Bytes_Read_Protection */
|
||||
|
||||
uint32_t BORLevel; /*!< Set the BOR Level.
|
||||
This parameter can be a value of @ref FLASHEx_BOR_Reset_Level */
|
||||
|
||||
uint32_t USERConfig; /*!< Program the FLASH User Option Byte: WWDG_SW / IWDG_SW / RST_STOP / RST_STDBY /
|
||||
IWDG_FREEZE_STOP / IWDG_FREEZE_SANDBY / nDBANK / nDBOOT.
|
||||
nDBANK / nDBOOT are only available for STM32F76xxx/STM32F77xxx devices */
|
||||
|
||||
uint32_t BootAddr0; /*!< Boot base address when Boot pin = 0.
|
||||
This parameter can be a value of @ref FLASHEx_Boot_Address */
|
||||
|
||||
uint32_t BootAddr1; /*!< Boot base address when Boot pin = 1.
|
||||
This parameter can be a value of @ref FLASHEx_Boot_Address */
|
||||
|
||||
#if defined (FLASH_OPTCR2_PCROP)
|
||||
uint32_t PCROPSector; /*!< Set the PCROP sector.
|
||||
This parameter can be a value of @ref FLASHEx_Option_Bytes_PCROP_Sectors */
|
||||
|
||||
uint32_t PCROPRdp; /*!< Set the PCROP_RDP option.
|
||||
This parameter can be a value of @ref FLASHEx_Option_Bytes_PCROP_RDP */
|
||||
#endif /* FLASH_OPTCR2_PCROP */
|
||||
|
||||
} FLASH_OBProgramInitTypeDef;
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
|
||||
/** @defgroup FLASHEx_Exported_Constants FLASH Exported Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup FLASHEx_Type_Erase FLASH Type Erase
|
||||
* @{
|
||||
*/
|
||||
#define FLASH_TYPEERASE_SECTORS ((uint32_t)0x00U) /*!< Sectors erase only */
|
||||
#define FLASH_TYPEERASE_MASSERASE ((uint32_t)0x01U) /*!< Flash Mass erase activation */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup FLASHEx_Voltage_Range FLASH Voltage Range
|
||||
* @{
|
||||
*/
|
||||
#define FLASH_VOLTAGE_RANGE_1 ((uint32_t)0x00U) /*!< Device operating range: 1.8V to 2.1V */
|
||||
#define FLASH_VOLTAGE_RANGE_2 ((uint32_t)0x01U) /*!< Device operating range: 2.1V to 2.7V */
|
||||
#define FLASH_VOLTAGE_RANGE_3 ((uint32_t)0x02U) /*!< Device operating range: 2.7V to 3.6V */
|
||||
#define FLASH_VOLTAGE_RANGE_4 ((uint32_t)0x03U) /*!< Device operating range: 2.7V to 3.6V + External Vpp */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup FLASHEx_WRP_State FLASH WRP State
|
||||
* @{
|
||||
*/
|
||||
#define OB_WRPSTATE_DISABLE ((uint32_t)0x00U) /*!< Disable the write protection of the desired bank 1 sectors */
|
||||
#define OB_WRPSTATE_ENABLE ((uint32_t)0x01U) /*!< Enable the write protection of the desired bank 1 sectors */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup FLASHEx_Option_Type FLASH Option Type
|
||||
* @{
|
||||
*/
|
||||
#define OPTIONBYTE_WRP ((uint32_t)0x01U) /*!< WRP option byte configuration */
|
||||
#define OPTIONBYTE_RDP ((uint32_t)0x02U) /*!< RDP option byte configuration */
|
||||
#define OPTIONBYTE_USER ((uint32_t)0x04U) /*!< USER option byte configuration */
|
||||
#define OPTIONBYTE_BOR ((uint32_t)0x08U) /*!< BOR option byte configuration */
|
||||
#define OPTIONBYTE_BOOTADDR_0 ((uint32_t)0x10U) /*!< Boot 0 Address configuration */
|
||||
#define OPTIONBYTE_BOOTADDR_1 ((uint32_t)0x20U) /*!< Boot 1 Address configuration */
|
||||
#if defined (FLASH_OPTCR2_PCROP)
|
||||
#define OPTIONBYTE_PCROP ((uint32_t)0x40U) /*!< PCROP configuration */
|
||||
#define OPTIONBYTE_PCROP_RDP ((uint32_t)0x80U) /*!< PCROP_RDP configuration */
|
||||
#endif /* FLASH_OPTCR2_PCROP */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup FLASHEx_Option_Bytes_Read_Protection FLASH Option Bytes Read Protection
|
||||
* @{
|
||||
*/
|
||||
#define OB_RDP_LEVEL_0 ((uint8_t)0xAAU)
|
||||
#define OB_RDP_LEVEL_1 ((uint8_t)0x55U)
|
||||
#define OB_RDP_LEVEL_2 ((uint8_t)0xCCU) /*!< Warning: When enabling read protection level 2
|
||||
it s no more possible to go back to level 1 or 0 */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup FLASHEx_Option_Bytes_WWatchdog FLASH Option Bytes WWatchdog
|
||||
* @{
|
||||
*/
|
||||
#define OB_WWDG_SW ((uint32_t)0x10U) /*!< Software WWDG selected */
|
||||
#define OB_WWDG_HW ((uint32_t)0x00U) /*!< Hardware WWDG selected */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
|
||||
/** @defgroup FLASHEx_Option_Bytes_IWatchdog FLASH Option Bytes IWatchdog
|
||||
* @{
|
||||
*/
|
||||
#define OB_IWDG_SW ((uint32_t)0x20U) /*!< Software IWDG selected */
|
||||
#define OB_IWDG_HW ((uint32_t)0x00U) /*!< Hardware IWDG selected */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup FLASHEx_Option_Bytes_nRST_STOP FLASH Option Bytes nRST_STOP
|
||||
* @{
|
||||
*/
|
||||
#define OB_STOP_NO_RST ((uint32_t)0x40U) /*!< No reset generated when entering in STOP */
|
||||
#define OB_STOP_RST ((uint32_t)0x00U) /*!< Reset generated when entering in STOP */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup FLASHEx_Option_Bytes_nRST_STDBY FLASH Option Bytes nRST_STDBY
|
||||
* @{
|
||||
*/
|
||||
#define OB_STDBY_NO_RST ((uint32_t)0x80U) /*!< No reset generated when entering in STANDBY */
|
||||
#define OB_STDBY_RST ((uint32_t)0x00U) /*!< Reset generated when entering in STANDBY */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup FLASHEx_Option_Bytes_IWDG_FREEZE_STOP FLASH IWDG Counter Freeze in STOP
|
||||
* @{
|
||||
*/
|
||||
#define OB_IWDG_STOP_FREEZE ((uint32_t)0x00000000U) /*!< Freeze IWDG counter in STOP mode */
|
||||
#define OB_IWDG_STOP_ACTIVE ((uint32_t)0x80000000U) /*!< IWDG counter active in STOP mode */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup FLASHEx_Option_Bytes_IWDG_FREEZE_SANDBY FLASH IWDG Counter Freeze in STANDBY
|
||||
* @{
|
||||
*/
|
||||
#define OB_IWDG_STDBY_FREEZE ((uint32_t)0x00000000U) /*!< Freeze IWDG counter in STANDBY mode */
|
||||
#define OB_IWDG_STDBY_ACTIVE ((uint32_t)0x40000000U) /*!< IWDG counter active in STANDBY mode */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup FLASHEx_BOR_Reset_Level FLASH BOR Reset Level
|
||||
* @{
|
||||
*/
|
||||
#define OB_BOR_LEVEL3 ((uint32_t)0x00U) /*!< Supply voltage ranges from 2.70 to 3.60 V */
|
||||
#define OB_BOR_LEVEL2 ((uint32_t)0x04U) /*!< Supply voltage ranges from 2.40 to 2.70 V */
|
||||
#define OB_BOR_LEVEL1 ((uint32_t)0x08U) /*!< Supply voltage ranges from 2.10 to 2.40 V */
|
||||
#define OB_BOR_OFF ((uint32_t)0x0CU) /*!< Supply voltage ranges from 1.62 to 2.10 V */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#if defined (FLASH_OPTCR_nDBOOT)
|
||||
/** @defgroup FLASHEx_Option_Bytes_nDBOOT FLASH Option Bytes nDBOOT
|
||||
* @{
|
||||
*/
|
||||
#define OB_DUAL_BOOT_DISABLE ((uint32_t)0x10000000U) /* !< Dual Boot disable. Boot according to boot address option */
|
||||
#define OB_DUAL_BOOT_ENABLE ((uint32_t)0x00000000U) /* !< Dual Boot enable. Boot always from system memory if boot address in flash
|
||||
(Dual bank Boot mode), or RAM if Boot address option in RAM */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
#endif /* FLASH_OPTCR_nDBOOT */
|
||||
|
||||
#if defined (FLASH_OPTCR_nDBANK)
|
||||
/** @defgroup FLASHEx_Option_Bytes_nDBank FLASH Single Bank or Dual Bank
|
||||
* @{
|
||||
*/
|
||||
#define OB_NDBANK_SINGLE_BANK ((uint32_t)0x20000000U) /*!< NDBANK bit is set : Single Bank mode */
|
||||
#define OB_NDBANK_DUAL_BANK ((uint32_t)0x00000000U) /*!< NDBANK bit is reset : Dual Bank mode */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
#endif /* FLASH_OPTCR_nDBANK */
|
||||
|
||||
/** @defgroup FLASHEx_Boot_Address FLASH Boot Address
|
||||
* @{
|
||||
*/
|
||||
#define OB_BOOTADDR_ITCM_RAM ((uint32_t)0x0000U) /*!< Boot from ITCM RAM (0x00000000) */
|
||||
#define OB_BOOTADDR_SYSTEM ((uint32_t)0x0040U) /*!< Boot from System memory bootloader (0x00100000) */
|
||||
#define OB_BOOTADDR_ITCM_FLASH ((uint32_t)0x0080U) /*!< Boot from Flash on ITCM interface (0x00200000) */
|
||||
#define OB_BOOTADDR_AXIM_FLASH ((uint32_t)0x2000U) /*!< Boot from Flash on AXIM interface (0x08000000) */
|
||||
#define OB_BOOTADDR_DTCM_RAM ((uint32_t)0x8000U) /*!< Boot from DTCM RAM (0x20000000) */
|
||||
#define OB_BOOTADDR_SRAM1 ((uint32_t)0x8004U) /*!< Boot from SRAM1 (0x20010000) */
|
||||
#if (SRAM2_BASE == 0x2003C000U)
|
||||
#define OB_BOOTADDR_SRAM2 ((uint32_t)0x800FU) /*!< Boot from SRAM2 (0x2003C000) */
|
||||
#else
|
||||
#define OB_BOOTADDR_SRAM2 ((uint32_t)0x8013U) /*!< Boot from SRAM2 (0x2004C000) */
|
||||
#endif /* SRAM2_BASE == 0x2003C000U */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup FLASH_Latency FLASH Latency
|
||||
* @{
|
||||
*/
|
||||
#define FLASH_LATENCY_0 FLASH_ACR_LATENCY_0WS /*!< FLASH Zero Latency cycle */
|
||||
#define FLASH_LATENCY_1 FLASH_ACR_LATENCY_1WS /*!< FLASH One Latency cycle */
|
||||
#define FLASH_LATENCY_2 FLASH_ACR_LATENCY_2WS /*!< FLASH Two Latency cycles */
|
||||
#define FLASH_LATENCY_3 FLASH_ACR_LATENCY_3WS /*!< FLASH Three Latency cycles */
|
||||
#define FLASH_LATENCY_4 FLASH_ACR_LATENCY_4WS /*!< FLASH Four Latency cycles */
|
||||
#define FLASH_LATENCY_5 FLASH_ACR_LATENCY_5WS /*!< FLASH Five Latency cycles */
|
||||
#define FLASH_LATENCY_6 FLASH_ACR_LATENCY_6WS /*!< FLASH Six Latency cycles */
|
||||
#define FLASH_LATENCY_7 FLASH_ACR_LATENCY_7WS /*!< FLASH Seven Latency cycles */
|
||||
#define FLASH_LATENCY_8 FLASH_ACR_LATENCY_8WS /*!< FLASH Eight Latency cycles */
|
||||
#define FLASH_LATENCY_9 FLASH_ACR_LATENCY_9WS /*!< FLASH Nine Latency cycles */
|
||||
#define FLASH_LATENCY_10 FLASH_ACR_LATENCY_10WS /*!< FLASH Ten Latency cycles */
|
||||
#define FLASH_LATENCY_11 FLASH_ACR_LATENCY_11WS /*!< FLASH Eleven Latency cycles */
|
||||
#define FLASH_LATENCY_12 FLASH_ACR_LATENCY_12WS /*!< FLASH Twelve Latency cycles */
|
||||
#define FLASH_LATENCY_13 FLASH_ACR_LATENCY_13WS /*!< FLASH Thirteen Latency cycles */
|
||||
#define FLASH_LATENCY_14 FLASH_ACR_LATENCY_14WS /*!< FLASH Fourteen Latency cycles */
|
||||
#define FLASH_LATENCY_15 FLASH_ACR_LATENCY_15WS /*!< FLASH Fifteen Latency cycles */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#if defined (FLASH_OPTCR_nDBANK)
|
||||
/** @defgroup FLASHEx_Banks FLASH Banks
|
||||
* @{
|
||||
*/
|
||||
#define FLASH_BANK_1 ((uint32_t)0x01U) /*!< Bank 1 */
|
||||
#define FLASH_BANK_2 ((uint32_t)0x02U) /*!< Bank 2 */
|
||||
#define FLASH_BANK_BOTH ((uint32_t)(FLASH_BANK_1 | FLASH_BANK_2)) /*!< Bank1 and Bank2 */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
#endif /* FLASH_OPTCR_nDBANK */
|
||||
|
||||
/** @defgroup FLASHEx_MassErase_bit FLASH Mass Erase bit
|
||||
* @{
|
||||
*/
|
||||
#if defined (FLASH_OPTCR_nDBANK)
|
||||
#define FLASH_MER_BIT (FLASH_CR_MER1 | FLASH_CR_MER2) /*!< 2 MER bits */
|
||||
#else
|
||||
#define FLASH_MER_BIT (FLASH_CR_MER) /*!< only 1 MER bit */
|
||||
#endif /* FLASH_OPTCR_nDBANK */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup FLASHEx_Sectors FLASH Sectors
|
||||
* @{
|
||||
*/
|
||||
#if (FLASH_SECTOR_TOTAL == 24)
|
||||
#define FLASH_SECTOR_8 ((uint32_t)8U) /*!< Sector Number 8 */
|
||||
#define FLASH_SECTOR_9 ((uint32_t)9U) /*!< Sector Number 9 */
|
||||
#define FLASH_SECTOR_10 ((uint32_t)10U) /*!< Sector Number 10 */
|
||||
#define FLASH_SECTOR_11 ((uint32_t)11U) /*!< Sector Number 11 */
|
||||
#define FLASH_SECTOR_12 ((uint32_t)12U) /*!< Sector Number 12 */
|
||||
#define FLASH_SECTOR_13 ((uint32_t)13U) /*!< Sector Number 13 */
|
||||
#define FLASH_SECTOR_14 ((uint32_t)14U) /*!< Sector Number 14 */
|
||||
#define FLASH_SECTOR_15 ((uint32_t)15U) /*!< Sector Number 15 */
|
||||
#define FLASH_SECTOR_16 ((uint32_t)16U) /*!< Sector Number 16 */
|
||||
#define FLASH_SECTOR_17 ((uint32_t)17U) /*!< Sector Number 17 */
|
||||
#define FLASH_SECTOR_18 ((uint32_t)18U) /*!< Sector Number 18 */
|
||||
#define FLASH_SECTOR_19 ((uint32_t)19U) /*!< Sector Number 19 */
|
||||
#define FLASH_SECTOR_20 ((uint32_t)20U) /*!< Sector Number 20 */
|
||||
#define FLASH_SECTOR_21 ((uint32_t)21U) /*!< Sector Number 21 */
|
||||
#define FLASH_SECTOR_22 ((uint32_t)22U) /*!< Sector Number 22 */
|
||||
#define FLASH_SECTOR_23 ((uint32_t)23U) /*!< Sector Number 23 */
|
||||
#endif /* FLASH_SECTOR_TOTAL == 24 */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#if (FLASH_SECTOR_TOTAL == 24)
|
||||
/** @defgroup FLASHEx_Option_Bytes_Write_Protection FLASH Option Bytes Write Protection
|
||||
* @note For Single Bank mode, use OB_WRP_SECTOR_x defines: In fact, in FLASH_OPTCR register,
|
||||
* nWRP[11:0] bits contain the value of the write-protection option bytes for sectors 0 to 11.
|
||||
* For Dual Bank mode, use OB_WRP_DB_SECTOR_x defines: In fact, in FLASH_OPTCR register,
|
||||
* nWRP[11:0] bits are divided on two groups, one group dedicated for bank 1 and
|
||||
* a second one dedicated for bank 2 (nWRP[i] activates Write protection on sector 2*i and 2*i+1).
|
||||
* This behavior is applicable only for STM32F76xxx / STM32F77xxx devices.
|
||||
* @{
|
||||
*/
|
||||
/* Single Bank Sectors */
|
||||
#define OB_WRP_SECTOR_0 ((uint32_t)0x00010000U) /*!< Write protection of Single Bank Sector0 */
|
||||
#define OB_WRP_SECTOR_1 ((uint32_t)0x00020000U) /*!< Write protection of Single Bank Sector1 */
|
||||
#define OB_WRP_SECTOR_2 ((uint32_t)0x00040000U) /*!< Write protection of Single Bank Sector2 */
|
||||
#define OB_WRP_SECTOR_3 ((uint32_t)0x00080000U) /*!< Write protection of Single Bank Sector3 */
|
||||
#define OB_WRP_SECTOR_4 ((uint32_t)0x00100000U) /*!< Write protection of Single Bank Sector4 */
|
||||
#define OB_WRP_SECTOR_5 ((uint32_t)0x00200000U) /*!< Write protection of Single Bank Sector5 */
|
||||
#define OB_WRP_SECTOR_6 ((uint32_t)0x00400000U) /*!< Write protection of Single Bank Sector6 */
|
||||
#define OB_WRP_SECTOR_7 ((uint32_t)0x00800000U) /*!< Write protection of Single Bank Sector7 */
|
||||
#define OB_WRP_SECTOR_8 ((uint32_t)0x01000000U) /*!< Write protection of Single Bank Sector8 */
|
||||
#define OB_WRP_SECTOR_9 ((uint32_t)0x02000000U) /*!< Write protection of Single Bank Sector9 */
|
||||
#define OB_WRP_SECTOR_10 ((uint32_t)0x04000000U) /*!< Write protection of Single Bank Sector10 */
|
||||
#define OB_WRP_SECTOR_11 ((uint32_t)0x08000000U) /*!< Write protection of Single Bank Sector11 */
|
||||
#define OB_WRP_SECTOR_All ((uint32_t)0x0FFF0000U) /*!< Write protection of all Sectors for Single Bank Flash */
|
||||
|
||||
/* Dual Bank Sectors */
|
||||
#define OB_WRP_DB_SECTOR_0 ((uint32_t)0x00010000U) /*!< Write protection of Dual Bank Sector0 */
|
||||
#define OB_WRP_DB_SECTOR_1 ((uint32_t)0x00010000U) /*!< Write protection of Dual Bank Sector1 */
|
||||
#define OB_WRP_DB_SECTOR_2 ((uint32_t)0x00020000U) /*!< Write protection of Dual Bank Sector2 */
|
||||
#define OB_WRP_DB_SECTOR_3 ((uint32_t)0x00020000U) /*!< Write protection of Dual Bank Sector3 */
|
||||
#define OB_WRP_DB_SECTOR_4 ((uint32_t)0x00040000U) /*!< Write protection of Dual Bank Sector4 */
|
||||
#define OB_WRP_DB_SECTOR_5 ((uint32_t)0x00040000U) /*!< Write protection of Dual Bank Sector5 */
|
||||
#define OB_WRP_DB_SECTOR_6 ((uint32_t)0x00080000U) /*!< Write protection of Dual Bank Sector6 */
|
||||
#define OB_WRP_DB_SECTOR_7 ((uint32_t)0x00080000U) /*!< Write protection of Dual Bank Sector7 */
|
||||
#define OB_WRP_DB_SECTOR_8 ((uint32_t)0x00100000U) /*!< Write protection of Dual Bank Sector8 */
|
||||
#define OB_WRP_DB_SECTOR_9 ((uint32_t)0x00100000U) /*!< Write protection of Dual Bank Sector9 */
|
||||
#define OB_WRP_DB_SECTOR_10 ((uint32_t)0x00200000U) /*!< Write protection of Dual Bank Sector10 */
|
||||
#define OB_WRP_DB_SECTOR_11 ((uint32_t)0x00200000U) /*!< Write protection of Dual Bank Sector11 */
|
||||
#define OB_WRP_DB_SECTOR_12 ((uint32_t)0x00400000U) /*!< Write protection of Dual Bank Sector12 */
|
||||
#define OB_WRP_DB_SECTOR_13 ((uint32_t)0x00400000U) /*!< Write protection of Dual Bank Sector13 */
|
||||
#define OB_WRP_DB_SECTOR_14 ((uint32_t)0x00800000U) /*!< Write protection of Dual Bank Sector14 */
|
||||
#define OB_WRP_DB_SECTOR_15 ((uint32_t)0x00800000U) /*!< Write protection of Dual Bank Sector15 */
|
||||
#define OB_WRP_DB_SECTOR_16 ((uint32_t)0x01000000U) /*!< Write protection of Dual Bank Sector16 */
|
||||
#define OB_WRP_DB_SECTOR_17 ((uint32_t)0x01000000U) /*!< Write protection of Dual Bank Sector17 */
|
||||
#define OB_WRP_DB_SECTOR_18 ((uint32_t)0x02000000U) /*!< Write protection of Dual Bank Sector18 */
|
||||
#define OB_WRP_DB_SECTOR_19 ((uint32_t)0x02000000U) /*!< Write protection of Dual Bank Sector19 */
|
||||
#define OB_WRP_DB_SECTOR_20 ((uint32_t)0x04000000U) /*!< Write protection of Dual Bank Sector20 */
|
||||
#define OB_WRP_DB_SECTOR_21 ((uint32_t)0x04000000U) /*!< Write protection of Dual Bank Sector21 */
|
||||
#define OB_WRP_DB_SECTOR_22 ((uint32_t)0x08000000U) /*!< Write protection of Dual Bank Sector22 */
|
||||
#define OB_WRP_DB_SECTOR_23 ((uint32_t)0x08000000U) /*!< Write protection of Dual Bank Sector23 */
|
||||
#define OB_WRP_DB_SECTOR_All ((uint32_t)0x0FFF0000U) /*!< Write protection of all Sectors for Dual Bank Flash */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
#endif /* FLASH_SECTOR_TOTAL == 24 */
|
||||
|
||||
#if (FLASH_SECTOR_TOTAL == 8)
|
||||
/** @defgroup FLASHEx_Option_Bytes_Write_Protection FLASH Option Bytes Write Protection
|
||||
* @{
|
||||
*/
|
||||
#define OB_WRP_SECTOR_0 ((uint32_t)0x00010000U) /*!< Write protection of Sector0 */
|
||||
#define OB_WRP_SECTOR_1 ((uint32_t)0x00020000U) /*!< Write protection of Sector1 */
|
||||
#define OB_WRP_SECTOR_2 ((uint32_t)0x00040000U) /*!< Write protection of Sector2 */
|
||||
#define OB_WRP_SECTOR_3 ((uint32_t)0x00080000U) /*!< Write protection of Sector3 */
|
||||
#define OB_WRP_SECTOR_4 ((uint32_t)0x00100000U) /*!< Write protection of Sector4 */
|
||||
#define OB_WRP_SECTOR_5 ((uint32_t)0x00200000U) /*!< Write protection of Sector5 */
|
||||
#define OB_WRP_SECTOR_6 ((uint32_t)0x00400000U) /*!< Write protection of Sector6 */
|
||||
#define OB_WRP_SECTOR_7 ((uint32_t)0x00800000U) /*!< Write protection of Sector7 */
|
||||
#define OB_WRP_SECTOR_All ((uint32_t)0x00FF0000U) /*!< Write protection of all Sectors */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
#endif /* FLASH_SECTOR_TOTAL == 8 */
|
||||
|
||||
#if (FLASH_SECTOR_TOTAL == 4)
|
||||
/** @defgroup FLASHEx_Option_Bytes_Write_Protection FLASH Option Bytes Write Protection
|
||||
* @{
|
||||
*/
|
||||
#define OB_WRP_SECTOR_0 ((uint32_t)0x00010000U) /*!< Write protection of Sector0 */
|
||||
#define OB_WRP_SECTOR_1 ((uint32_t)0x00020000U) /*!< Write protection of Sector1 */
|
||||
#define OB_WRP_SECTOR_2 ((uint32_t)0x00040000U) /*!< Write protection of Sector2 */
|
||||
#define OB_WRP_SECTOR_3 ((uint32_t)0x00080000U) /*!< Write protection of Sector3 */
|
||||
#define OB_WRP_SECTOR_All ((uint32_t)0x000F0000U) /*!< Write protection of all Sectors */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
#endif /* FLASH_SECTOR_TOTAL == 4 */
|
||||
|
||||
#if (FLASH_SECTOR_TOTAL == 2)
|
||||
/** @defgroup FLASHEx_Option_Bytes_Write_Protection FLASH Option Bytes Write Protection
|
||||
* @{
|
||||
*/
|
||||
#define OB_WRP_SECTOR_0 ((uint32_t)0x00010000U) /*!< Write protection of Sector0 */
|
||||
#define OB_WRP_SECTOR_1 ((uint32_t)0x00020000U) /*!< Write protection of Sector1 */
|
||||
#define OB_WRP_SECTOR_All ((uint32_t)0x00030000U) /*!< Write protection of all Sectors */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
#endif /* FLASH_SECTOR_TOTAL == 2 */
|
||||
|
||||
#if defined (FLASH_OPTCR2_PCROP)
|
||||
#if (FLASH_SECTOR_TOTAL == 8)
|
||||
/** @defgroup FLASHEx_Option_Bytes_PCROP_Sectors FLASH Option Bytes PCROP Sectors
|
||||
* @{
|
||||
*/
|
||||
#define OB_PCROP_SECTOR_0 ((uint32_t)0x00000001U) /*!< PC Readout protection of Sector0 */
|
||||
#define OB_PCROP_SECTOR_1 ((uint32_t)0x00000002U) /*!< PC Readout protection of Sector1 */
|
||||
#define OB_PCROP_SECTOR_2 ((uint32_t)0x00000004U) /*!< PC Readout protection of Sector2 */
|
||||
#define OB_PCROP_SECTOR_3 ((uint32_t)0x00000008U) /*!< PC Readout protection of Sector3 */
|
||||
#define OB_PCROP_SECTOR_4 ((uint32_t)0x00000010U) /*!< PC Readout protection of Sector4 */
|
||||
#define OB_PCROP_SECTOR_5 ((uint32_t)0x00000020U) /*!< PC Readout protection of Sector5 */
|
||||
#define OB_PCROP_SECTOR_6 ((uint32_t)0x00000040U) /*!< PC Readout protection of Sector6 */
|
||||
#define OB_PCROP_SECTOR_7 ((uint32_t)0x00000080U) /*!< PC Readout protection of Sector7 */
|
||||
#define OB_PCROP_SECTOR_All ((uint32_t)0x000000FFU) /*!< PC Readout protection of all Sectors */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
#endif /* FLASH_SECTOR_TOTAL == 8 */
|
||||
|
||||
#if (FLASH_SECTOR_TOTAL == 4)
|
||||
/** @defgroup FLASHEx_Option_Bytes_PCROP_Sectors FLASH Option Bytes PCROP Sectors
|
||||
* @{
|
||||
*/
|
||||
#define OB_PCROP_SECTOR_0 ((uint32_t)0x00000001U) /*!< PC Readout protection of Sector0 */
|
||||
#define OB_PCROP_SECTOR_1 ((uint32_t)0x00000002U) /*!< PC Readout protection of Sector1 */
|
||||
#define OB_PCROP_SECTOR_2 ((uint32_t)0x00000004U) /*!< PC Readout protection of Sector2 */
|
||||
#define OB_PCROP_SECTOR_3 ((uint32_t)0x00000008U) /*!< PC Readout protection of Sector3 */
|
||||
#define OB_PCROP_SECTOR_All ((uint32_t)0x0000000FU) /*!< PC Readout protection of all Sectors */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
#endif /* FLASH_SECTOR_TOTAL == 4 */
|
||||
|
||||
/** @defgroup FLASHEx_Option_Bytes_PCROP_RDP FLASH Option Bytes PCROP_RDP Bit
|
||||
* @{
|
||||
*/
|
||||
#define OB_PCROP_RDP_ENABLE ((uint32_t)0x80000000U) /*!< PCROP_RDP Enable */
|
||||
#define OB_PCROP_RDP_DISABLE ((uint32_t)0x00000000U) /*!< PCROP_RDP Disable */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
#endif /* FLASH_OPTCR2_PCROP */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/** @defgroup FLASH_Exported_Macros FLASH Exported Macros
|
||||
* @{
|
||||
*/
|
||||
/**
|
||||
* @brief Calculate the FLASH Boot Base Address (BOOT_ADD0 or BOOT_ADD1)
|
||||
* @note Returned value BOOT_ADDx[15:0] corresponds to boot address [29:14].
|
||||
* @param __ADDRESS__ FLASH Boot Address (in the range 0x0000 0000 to 0x2004 FFFF with a granularity of 16KB)
|
||||
* @retval The FLASH Boot Base Address
|
||||
*/
|
||||
#define __HAL_FLASH_CALC_BOOT_BASE_ADR(__ADDRESS__) ((__ADDRESS__) >> 14)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @addtogroup FLASHEx_Exported_Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup FLASHEx_Exported_Functions_Group1
|
||||
* @{
|
||||
*/
|
||||
/* Extension Program operation functions *************************************/
|
||||
HAL_StatusTypeDef HAL_FLASHEx_Erase(FLASH_EraseInitTypeDef *pEraseInit, uint32_t *SectorError);
|
||||
HAL_StatusTypeDef HAL_FLASHEx_Erase_IT(FLASH_EraseInitTypeDef *pEraseInit);
|
||||
HAL_StatusTypeDef HAL_FLASHEx_OBProgram(FLASH_OBProgramInitTypeDef *pOBInit);
|
||||
void HAL_FLASHEx_OBGetConfig(FLASH_OBProgramInitTypeDef *pOBInit);
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/* Private types -------------------------------------------------------------*/
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
/* Private constants ---------------------------------------------------------*/
|
||||
/* Private macros ------------------------------------------------------------*/
|
||||
/** @defgroup FLASHEx_Private_Macros FLASH Private Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup FLASHEx_IS_FLASH_Definitions FLASH Private macros to check input parameters
|
||||
* @{
|
||||
*/
|
||||
|
||||
#define IS_FLASH_TYPEERASE(VALUE)(((VALUE) == FLASH_TYPEERASE_SECTORS) || \
|
||||
((VALUE) == FLASH_TYPEERASE_MASSERASE))
|
||||
|
||||
#define IS_VOLTAGERANGE(RANGE)(((RANGE) == FLASH_VOLTAGE_RANGE_1) || \
|
||||
((RANGE) == FLASH_VOLTAGE_RANGE_2) || \
|
||||
((RANGE) == FLASH_VOLTAGE_RANGE_3) || \
|
||||
((RANGE) == FLASH_VOLTAGE_RANGE_4))
|
||||
|
||||
#define IS_WRPSTATE(VALUE)(((VALUE) == OB_WRPSTATE_DISABLE) || \
|
||||
((VALUE) == OB_WRPSTATE_ENABLE))
|
||||
|
||||
#if defined (FLASH_OPTCR2_PCROP)
|
||||
#define IS_OPTIONBYTE(VALUE)(((VALUE) <= (OPTIONBYTE_WRP | OPTIONBYTE_RDP | OPTIONBYTE_USER |\
|
||||
OPTIONBYTE_BOR | OPTIONBYTE_BOOTADDR_0 | OPTIONBYTE_BOOTADDR_1 |\
|
||||
OPTIONBYTE_PCROP | OPTIONBYTE_PCROP_RDP)))
|
||||
#else
|
||||
#define IS_OPTIONBYTE(VALUE)(((VALUE) <= (OPTIONBYTE_WRP | OPTIONBYTE_RDP | OPTIONBYTE_USER |\
|
||||
OPTIONBYTE_BOR | OPTIONBYTE_BOOTADDR_0 | OPTIONBYTE_BOOTADDR_1)))
|
||||
#endif /* FLASH_OPTCR2_PCROP */
|
||||
|
||||
#define IS_OB_BOOT_ADDRESS(ADDRESS) ((ADDRESS) <= 0x8013)
|
||||
|
||||
#define IS_OB_RDP_LEVEL(LEVEL) (((LEVEL) == OB_RDP_LEVEL_0) ||\
|
||||
((LEVEL) == OB_RDP_LEVEL_1) ||\
|
||||
((LEVEL) == OB_RDP_LEVEL_2))
|
||||
|
||||
#define IS_OB_WWDG_SOURCE(SOURCE) (((SOURCE) == OB_WWDG_SW) || ((SOURCE) == OB_WWDG_HW))
|
||||
|
||||
#define IS_OB_IWDG_SOURCE(SOURCE) (((SOURCE) == OB_IWDG_SW) || ((SOURCE) == OB_IWDG_HW))
|
||||
|
||||
#define IS_OB_STOP_SOURCE(SOURCE) (((SOURCE) == OB_STOP_NO_RST) || ((SOURCE) == OB_STOP_RST))
|
||||
|
||||
#define IS_OB_STDBY_SOURCE(SOURCE) (((SOURCE) == OB_STDBY_NO_RST) || ((SOURCE) == OB_STDBY_RST))
|
||||
|
||||
#define IS_OB_IWDG_STOP_FREEZE(FREEZE) (((FREEZE) == OB_IWDG_STOP_FREEZE) || ((FREEZE) == OB_IWDG_STOP_ACTIVE))
|
||||
|
||||
#define IS_OB_IWDG_STDBY_FREEZE(FREEZE) (((FREEZE) == OB_IWDG_STDBY_FREEZE) || ((FREEZE) == OB_IWDG_STDBY_ACTIVE))
|
||||
|
||||
#define IS_OB_BOR_LEVEL(LEVEL) (((LEVEL) == OB_BOR_LEVEL1) || ((LEVEL) == OB_BOR_LEVEL2) ||\
|
||||
((LEVEL) == OB_BOR_LEVEL3) || ((LEVEL) == OB_BOR_OFF))
|
||||
|
||||
#define IS_FLASH_LATENCY(LATENCY) (((LATENCY) == FLASH_LATENCY_0) || \
|
||||
((LATENCY) == FLASH_LATENCY_1) || \
|
||||
((LATENCY) == FLASH_LATENCY_2) || \
|
||||
((LATENCY) == FLASH_LATENCY_3) || \
|
||||
((LATENCY) == FLASH_LATENCY_4) || \
|
||||
((LATENCY) == FLASH_LATENCY_5) || \
|
||||
((LATENCY) == FLASH_LATENCY_6) || \
|
||||
((LATENCY) == FLASH_LATENCY_7) || \
|
||||
((LATENCY) == FLASH_LATENCY_8) || \
|
||||
((LATENCY) == FLASH_LATENCY_9) || \
|
||||
((LATENCY) == FLASH_LATENCY_10) || \
|
||||
((LATENCY) == FLASH_LATENCY_11) || \
|
||||
((LATENCY) == FLASH_LATENCY_12) || \
|
||||
((LATENCY) == FLASH_LATENCY_13) || \
|
||||
((LATENCY) == FLASH_LATENCY_14) || \
|
||||
((LATENCY) == FLASH_LATENCY_15))
|
||||
|
||||
#define IS_FLASH_ADDRESS(ADDRESS) ((((ADDRESS) >= FLASH_BASE) && ((ADDRESS) <= FLASH_END)) || \
|
||||
(((ADDRESS) >= FLASH_OTP_BASE) && ((ADDRESS) <= FLASH_OTP_END)))
|
||||
#define IS_FLASH_NBSECTORS(NBSECTORS) (((NBSECTORS) != 0U) && ((NBSECTORS) <= FLASH_SECTOR_TOTAL))
|
||||
|
||||
#if (FLASH_SECTOR_TOTAL == 8)
|
||||
#define IS_FLASH_SECTOR(SECTOR) (((SECTOR) == FLASH_SECTOR_0) || ((SECTOR) == FLASH_SECTOR_1) ||\
|
||||
((SECTOR) == FLASH_SECTOR_2) || ((SECTOR) == FLASH_SECTOR_3) ||\
|
||||
((SECTOR) == FLASH_SECTOR_4) || ((SECTOR) == FLASH_SECTOR_5) ||\
|
||||
((SECTOR) == FLASH_SECTOR_6) || ((SECTOR) == FLASH_SECTOR_7))
|
||||
|
||||
#define IS_OB_WRP_SECTOR(SECTOR) ((((SECTOR) & 0xFF00FFFFU) == 0x00000000U) && ((SECTOR) != 0x00000000U))
|
||||
#endif /* FLASH_SECTOR_TOTAL == 8 */
|
||||
|
||||
#if (FLASH_SECTOR_TOTAL == 24)
|
||||
#define IS_FLASH_SECTOR(SECTOR) (((SECTOR) == FLASH_SECTOR_0) || ((SECTOR) == FLASH_SECTOR_1) ||\
|
||||
((SECTOR) == FLASH_SECTOR_2) || ((SECTOR) == FLASH_SECTOR_3) ||\
|
||||
((SECTOR) == FLASH_SECTOR_4) || ((SECTOR) == FLASH_SECTOR_5) ||\
|
||||
((SECTOR) == FLASH_SECTOR_6) || ((SECTOR) == FLASH_SECTOR_7) ||\
|
||||
((SECTOR) == FLASH_SECTOR_8) || ((SECTOR) == FLASH_SECTOR_9) ||\
|
||||
((SECTOR) == FLASH_SECTOR_10) || ((SECTOR) == FLASH_SECTOR_11) ||\
|
||||
((SECTOR) == FLASH_SECTOR_12) || ((SECTOR) == FLASH_SECTOR_13) ||\
|
||||
((SECTOR) == FLASH_SECTOR_14) || ((SECTOR) == FLASH_SECTOR_15) ||\
|
||||
((SECTOR) == FLASH_SECTOR_16) || ((SECTOR) == FLASH_SECTOR_17) ||\
|
||||
((SECTOR) == FLASH_SECTOR_18) || ((SECTOR) == FLASH_SECTOR_19) ||\
|
||||
((SECTOR) == FLASH_SECTOR_20) || ((SECTOR) == FLASH_SECTOR_21) ||\
|
||||
((SECTOR) == FLASH_SECTOR_22) || ((SECTOR) == FLASH_SECTOR_23))
|
||||
|
||||
#define IS_OB_WRP_SECTOR(SECTOR) ((((SECTOR) & 0xF000FFFFU) == 0x00000000U) && ((SECTOR) != 0x00000000U))
|
||||
#endif /* FLASH_SECTOR_TOTAL == 24 */
|
||||
|
||||
#if (FLASH_SECTOR_TOTAL == 4)
|
||||
#define IS_FLASH_SECTOR(SECTOR) (((SECTOR) == FLASH_SECTOR_0) || ((SECTOR) == FLASH_SECTOR_1) ||\
|
||||
((SECTOR) == FLASH_SECTOR_2) || ((SECTOR) == FLASH_SECTOR_3))
|
||||
|
||||
#define IS_OB_WRP_SECTOR(SECTOR) ((((SECTOR) & 0xFFF0FFFFU) == 0x00000000U) && ((SECTOR) != 0x00000000U))
|
||||
#endif /* FLASH_SECTOR_TOTAL == 4 */
|
||||
|
||||
#if (FLASH_SECTOR_TOTAL == 2)
|
||||
#define IS_FLASH_SECTOR(SECTOR) (((SECTOR) == FLASH_SECTOR_0) || ((SECTOR) == FLASH_SECTOR_1))
|
||||
|
||||
#define IS_OB_WRP_SECTOR(SECTOR) ((((SECTOR) & 0xFFFCFFFFU) == 0x00000000U) && ((SECTOR) != 0x00000000U))
|
||||
#endif /* FLASH_SECTOR_TOTAL == 2 */
|
||||
|
||||
#if defined (FLASH_OPTCR_nDBANK)
|
||||
#define IS_OB_NDBANK(VALUE) (((VALUE) == OB_NDBANK_SINGLE_BANK) || \
|
||||
((VALUE) == OB_NDBANK_DUAL_BANK))
|
||||
|
||||
#define IS_FLASH_BANK(BANK) (((BANK) == FLASH_BANK_1) || \
|
||||
((BANK) == FLASH_BANK_2) || \
|
||||
((BANK) == FLASH_BANK_BOTH))
|
||||
#endif /* FLASH_OPTCR_nDBANK */
|
||||
|
||||
#if defined (FLASH_OPTCR_nDBOOT)
|
||||
#define IS_OB_NDBOOT(VALUE) (((VALUE) == OB_DUAL_BOOT_DISABLE) || \
|
||||
((VALUE) == OB_DUAL_BOOT_ENABLE))
|
||||
#endif /* FLASH_OPTCR_nDBOOT */
|
||||
|
||||
#if defined (FLASH_OPTCR2_PCROP)
|
||||
#define IS_OB_PCROP_SECTOR(SECTOR) (((SECTOR) & (uint32_t)0xFFFFFF00U) == 0x00000000U)
|
||||
#define IS_OB_PCROP_RDP_VALUE(VALUE) (((VALUE) == OB_PCROP_RDP_DISABLE) || \
|
||||
((VALUE) == OB_PCROP_RDP_ENABLE))
|
||||
#endif /* FLASH_OPTCR2_PCROP */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private functions ---------------------------------------------------------*/
|
||||
/** @defgroup FLASHEx_Private_Functions FLASH Private Functions
|
||||
* @{
|
||||
*/
|
||||
void FLASH_Erase_Sector(uint32_t Sector, uint8_t VoltageRange);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __STM32F7xx_HAL_FLASH_EX_H */
|
||||
|
||||
323
project/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_gpio.h
Normal file
323
project/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_gpio.h
Normal file
@@ -0,0 +1,323 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f7xx_hal_gpio.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of GPIO HAL module.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __STM32F7xx_HAL_GPIO_H
|
||||
#define __STM32F7xx_HAL_GPIO_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f7xx_hal_def.h"
|
||||
|
||||
/** @addtogroup STM32F7xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup GPIO
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/** @defgroup GPIO_Exported_Types GPIO Exported Types
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief GPIO Init structure definition
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint32_t Pin; /*!< Specifies the GPIO pins to be configured.
|
||||
This parameter can be any value of @ref GPIO_pins_define */
|
||||
|
||||
uint32_t Mode; /*!< Specifies the operating mode for the selected pins.
|
||||
This parameter can be a value of @ref GPIO_mode_define */
|
||||
|
||||
uint32_t Pull; /*!< Specifies the Pull-up or Pull-Down activation for the selected pins.
|
||||
This parameter can be a value of @ref GPIO_pull_define */
|
||||
|
||||
uint32_t Speed; /*!< Specifies the speed for the selected pins.
|
||||
This parameter can be a value of @ref GPIO_speed_define */
|
||||
|
||||
uint32_t Alternate; /*!< Peripheral to be connected to the selected pins.
|
||||
This parameter can be a value of @ref GPIO_Alternate_function_selection */
|
||||
}GPIO_InitTypeDef;
|
||||
|
||||
/**
|
||||
* @brief GPIO Bit SET and Bit RESET enumeration
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
GPIO_PIN_RESET = 0,
|
||||
GPIO_PIN_SET
|
||||
}GPIO_PinState;
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
|
||||
/** @defgroup GPIO_Exported_Constants GPIO Exported Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup GPIO_pins_define GPIO pins define
|
||||
* @{
|
||||
*/
|
||||
#define GPIO_PIN_0 ((uint16_t)0x0001U) /* Pin 0 selected */
|
||||
#define GPIO_PIN_1 ((uint16_t)0x0002U) /* Pin 1 selected */
|
||||
#define GPIO_PIN_2 ((uint16_t)0x0004U) /* Pin 2 selected */
|
||||
#define GPIO_PIN_3 ((uint16_t)0x0008U) /* Pin 3 selected */
|
||||
#define GPIO_PIN_4 ((uint16_t)0x0010U) /* Pin 4 selected */
|
||||
#define GPIO_PIN_5 ((uint16_t)0x0020U) /* Pin 5 selected */
|
||||
#define GPIO_PIN_6 ((uint16_t)0x0040U) /* Pin 6 selected */
|
||||
#define GPIO_PIN_7 ((uint16_t)0x0080U) /* Pin 7 selected */
|
||||
#define GPIO_PIN_8 ((uint16_t)0x0100U) /* Pin 8 selected */
|
||||
#define GPIO_PIN_9 ((uint16_t)0x0200U) /* Pin 9 selected */
|
||||
#define GPIO_PIN_10 ((uint16_t)0x0400U) /* Pin 10 selected */
|
||||
#define GPIO_PIN_11 ((uint16_t)0x0800U) /* Pin 11 selected */
|
||||
#define GPIO_PIN_12 ((uint16_t)0x1000U) /* Pin 12 selected */
|
||||
#define GPIO_PIN_13 ((uint16_t)0x2000U) /* Pin 13 selected */
|
||||
#define GPIO_PIN_14 ((uint16_t)0x4000U) /* Pin 14 selected */
|
||||
#define GPIO_PIN_15 ((uint16_t)0x8000U) /* Pin 15 selected */
|
||||
#define GPIO_PIN_All ((uint16_t)0xFFFFU) /* All pins selected */
|
||||
|
||||
#define GPIO_PIN_MASK ((uint32_t)0x0000FFFFU) /* PIN mask for assert test */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup GPIO_mode_define GPIO mode define
|
||||
* @brief GPIO Configuration Mode
|
||||
* Elements values convention: 0x00WX00YZ
|
||||
* - W : EXTI trigger detection on 3 bits
|
||||
* - X : EXTI mode (IT or Event) on 2 bits
|
||||
* - Y : Output type (Push Pull or Open Drain) on 1 bit
|
||||
* - Z : GPIO mode (Input, Output, Alternate or Analog) on 2 bits
|
||||
* @{
|
||||
*/
|
||||
#define GPIO_MODE_INPUT MODE_INPUT /*!< Input Floating Mode */
|
||||
#define GPIO_MODE_OUTPUT_PP (MODE_OUTPUT | OUTPUT_PP) /*!< Output Push Pull Mode */
|
||||
#define GPIO_MODE_OUTPUT_OD (MODE_OUTPUT | OUTPUT_OD) /*!< Output Open Drain Mode */
|
||||
#define GPIO_MODE_AF_PP (MODE_AF | OUTPUT_PP) /*!< Alternate Function Push Pull Mode */
|
||||
#define GPIO_MODE_AF_OD (MODE_AF | OUTPUT_OD) /*!< Alternate Function Open Drain Mode */
|
||||
|
||||
#define GPIO_MODE_ANALOG MODE_ANALOG /*!< Analog Mode */
|
||||
|
||||
#define GPIO_MODE_IT_RISING (MODE_INPUT | EXTI_IT | TRIGGER_RISING) /*!< External Interrupt Mode with Rising edge trigger detection */
|
||||
#define GPIO_MODE_IT_FALLING (MODE_INPUT | EXTI_IT | TRIGGER_FALLING) /*!< External Interrupt Mode with Falling edge trigger detection */
|
||||
#define GPIO_MODE_IT_RISING_FALLING (MODE_INPUT | EXTI_IT | TRIGGER_RISING | TRIGGER_FALLING) /*!< External Interrupt Mode with Rising/Falling edge trigger detection */
|
||||
|
||||
#define GPIO_MODE_EVT_RISING (MODE_INPUT | EXTI_EVT | TRIGGER_RISING) /*!< External Event Mode with Rising edge trigger detection */
|
||||
#define GPIO_MODE_EVT_FALLING (MODE_INPUT | EXTI_EVT | TRIGGER_FALLING) /*!< External Event Mode with Falling edge trigger detection */
|
||||
#define GPIO_MODE_EVT_RISING_FALLING (MODE_INPUT | EXTI_EVT | TRIGGER_RISING | TRIGGER_FALLING) /*!< External Event Mode with Rising/Falling edge trigger detection */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup GPIO_speed_define GPIO speed define
|
||||
* @brief GPIO Output Maximum frequency
|
||||
* @{
|
||||
*/
|
||||
#define GPIO_SPEED_FREQ_LOW ((uint32_t)0x00000000U) /*!< Low speed */
|
||||
#define GPIO_SPEED_FREQ_MEDIUM ((uint32_t)0x00000001U) /*!< Medium speed */
|
||||
#define GPIO_SPEED_FREQ_HIGH ((uint32_t)0x00000002U) /*!< Fast speed */
|
||||
#define GPIO_SPEED_FREQ_VERY_HIGH ((uint32_t)0x00000003U) /*!< High speed */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup GPIO_pull_define GPIO pull define
|
||||
* @brief GPIO Pull-Up or Pull-Down Activation
|
||||
* @{
|
||||
*/
|
||||
#define GPIO_NOPULL ((uint32_t)0x00000000U) /*!< No Pull-up or Pull-down activation */
|
||||
#define GPIO_PULLUP ((uint32_t)0x00000001U) /*!< Pull-up activation */
|
||||
#define GPIO_PULLDOWN ((uint32_t)0x00000002U) /*!< Pull-down activation */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/** @defgroup GPIO_Exported_Macros GPIO Exported Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Checks whether the specified EXTI line flag is set or not.
|
||||
* @param __EXTI_LINE__ specifies the EXTI line flag to check.
|
||||
* This parameter can be GPIO_PIN_x where x can be(0..15)
|
||||
* @retval The new state of __EXTI_LINE__ (SET or RESET).
|
||||
*/
|
||||
#define __HAL_GPIO_EXTI_GET_FLAG(__EXTI_LINE__) (EXTI->PR & (__EXTI_LINE__))
|
||||
|
||||
/**
|
||||
* @brief Clears the EXTI's line pending flags.
|
||||
* @param __EXTI_LINE__ specifies the EXTI lines flags to clear.
|
||||
* This parameter can be any combination of GPIO_PIN_x where x can be (0..15)
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_GPIO_EXTI_CLEAR_FLAG(__EXTI_LINE__) (EXTI->PR = (__EXTI_LINE__))
|
||||
|
||||
/**
|
||||
* @brief Checks whether the specified EXTI line is asserted or not.
|
||||
* @param __EXTI_LINE__ specifies the EXTI line to check.
|
||||
* This parameter can be GPIO_PIN_x where x can be(0..15)
|
||||
* @retval The new state of __EXTI_LINE__ (SET or RESET).
|
||||
*/
|
||||
#define __HAL_GPIO_EXTI_GET_IT(__EXTI_LINE__) (EXTI->PR & (__EXTI_LINE__))
|
||||
|
||||
/**
|
||||
* @brief Clears the EXTI's line pending bits.
|
||||
* @param __EXTI_LINE__ specifies the EXTI lines to clear.
|
||||
* This parameter can be any combination of GPIO_PIN_x where x can be (0..15)
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_GPIO_EXTI_CLEAR_IT(__EXTI_LINE__) (EXTI->PR = (__EXTI_LINE__))
|
||||
|
||||
/**
|
||||
* @brief Generates a Software interrupt on selected EXTI line.
|
||||
* @param __EXTI_LINE__ specifies the EXTI line to check.
|
||||
* This parameter can be GPIO_PIN_x where x can be(0..15)
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_GPIO_EXTI_GENERATE_SWIT(__EXTI_LINE__) (EXTI->SWIER |= (__EXTI_LINE__))
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Include GPIO HAL Extension module */
|
||||
#include "stm32f7xx_hal_gpio_ex.h"
|
||||
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @addtogroup GPIO_Exported_Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup GPIO_Exported_Functions_Group1
|
||||
* @{
|
||||
*/
|
||||
/* Initialization and de-initialization functions *****************************/
|
||||
void HAL_GPIO_Init(GPIO_TypeDef *GPIOx, GPIO_InitTypeDef *GPIO_Init);
|
||||
void HAL_GPIO_DeInit(GPIO_TypeDef *GPIOx, uint32_t GPIO_Pin);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup GPIO_Exported_Functions_Group2
|
||||
* @{
|
||||
*/
|
||||
/* IO operation functions *****************************************************/
|
||||
GPIO_PinState HAL_GPIO_ReadPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
|
||||
void HAL_GPIO_WritePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, GPIO_PinState PinState);
|
||||
void HAL_GPIO_TogglePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
|
||||
HAL_StatusTypeDef HAL_GPIO_LockPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
|
||||
void HAL_GPIO_EXTI_IRQHandler(uint16_t GPIO_Pin);
|
||||
void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin);
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/* Private types -------------------------------------------------------------*/
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
/* Private constants ---------------------------------------------------------*/
|
||||
/** @defgroup GPIO_Private_Constants GPIO Private Constants
|
||||
* @{
|
||||
*/
|
||||
#define GPIO_MODE_Pos 0U
|
||||
#define GPIO_MODE (0x3UL << GPIO_MODE_Pos)
|
||||
#define MODE_INPUT (0x0UL << GPIO_MODE_Pos)
|
||||
#define MODE_OUTPUT (0x1UL << GPIO_MODE_Pos)
|
||||
#define MODE_AF (0x2UL << GPIO_MODE_Pos)
|
||||
#define MODE_ANALOG (0x3UL << GPIO_MODE_Pos)
|
||||
#define OUTPUT_TYPE_Pos 4U
|
||||
#define OUTPUT_TYPE (0x1UL << OUTPUT_TYPE_Pos)
|
||||
#define OUTPUT_PP (0x0UL << OUTPUT_TYPE_Pos)
|
||||
#define OUTPUT_OD (0x1UL << OUTPUT_TYPE_Pos)
|
||||
#define EXTI_MODE_Pos 16U
|
||||
#define EXTI_MODE (0x3UL << EXTI_MODE_Pos)
|
||||
#define EXTI_IT (0x1UL << EXTI_MODE_Pos)
|
||||
#define EXTI_EVT (0x2UL << EXTI_MODE_Pos)
|
||||
#define TRIGGER_MODE_Pos 20U
|
||||
#define TRIGGER_MODE (0x7UL << TRIGGER_MODE_Pos)
|
||||
#define TRIGGER_RISING (0x1UL << TRIGGER_MODE_Pos)
|
||||
#define TRIGGER_FALLING (0x2UL << TRIGGER_MODE_Pos)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private macros ------------------------------------------------------------*/
|
||||
/** @defgroup GPIO_Private_Macros GPIO Private Macros
|
||||
* @{
|
||||
*/
|
||||
#define IS_GPIO_PIN_ACTION(ACTION) (((ACTION) == GPIO_PIN_RESET) || ((ACTION) == GPIO_PIN_SET))
|
||||
#define IS_GPIO_PIN(__PIN__) ((((uint32_t)(__PIN__) & GPIO_PIN_MASK) != 0x00U))
|
||||
#define IS_GPIO_MODE(MODE) (((MODE) == GPIO_MODE_INPUT) ||\
|
||||
((MODE) == GPIO_MODE_OUTPUT_PP) ||\
|
||||
((MODE) == GPIO_MODE_OUTPUT_OD) ||\
|
||||
((MODE) == GPIO_MODE_AF_PP) ||\
|
||||
((MODE) == GPIO_MODE_AF_OD) ||\
|
||||
((MODE) == GPIO_MODE_IT_RISING) ||\
|
||||
((MODE) == GPIO_MODE_IT_FALLING) ||\
|
||||
((MODE) == GPIO_MODE_IT_RISING_FALLING) ||\
|
||||
((MODE) == GPIO_MODE_EVT_RISING) ||\
|
||||
((MODE) == GPIO_MODE_EVT_FALLING) ||\
|
||||
((MODE) == GPIO_MODE_EVT_RISING_FALLING) ||\
|
||||
((MODE) == GPIO_MODE_ANALOG))
|
||||
#define IS_GPIO_SPEED(SPEED) (((SPEED) == GPIO_SPEED_LOW) || ((SPEED) == GPIO_SPEED_MEDIUM) || \
|
||||
((SPEED) == GPIO_SPEED_FAST) || ((SPEED) == GPIO_SPEED_HIGH))
|
||||
#define IS_GPIO_PULL(PULL) (((PULL) == GPIO_NOPULL) || ((PULL) == GPIO_PULLUP) || \
|
||||
((PULL) == GPIO_PULLDOWN))
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private functions ---------------------------------------------------------*/
|
||||
/** @defgroup GPIO_Private_Functions GPIO Private Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __STM32F7xx_HAL_GPIO_H */
|
||||
|
||||
656
project/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_gpio_ex.h
Normal file
656
project/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_gpio_ex.h
Normal file
@@ -0,0 +1,656 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f7xx_hal_gpio_ex.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of GPIO HAL Extension module.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __STM32F7xx_HAL_GPIO_EX_H
|
||||
#define __STM32F7xx_HAL_GPIO_EX_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f7xx_hal_def.h"
|
||||
|
||||
/** @addtogroup STM32F7xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup GPIOEx GPIOEx
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/** @defgroup GPIOEx_Exported_Constants GPIO Exported Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup GPIO_Alternate_function_selection GPIO Alternate Function Selection
|
||||
* @{
|
||||
*/
|
||||
/*--------------- STM32F74xxx/STM32F75xxx/STM32F76xxx/STM32F77xxx -------------*/
|
||||
#if defined (STM32F745xx) || defined (STM32F746xx) || defined (STM32F756xx) || defined (STM32F765xx) || defined (STM32F767xx) ||\
|
||||
defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx) || defined (STM32F750xx)
|
||||
/**
|
||||
* @brief AF 0 selection
|
||||
*/
|
||||
#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00U) /* RTC_50Hz Alternate Function mapping */
|
||||
#define GPIO_AF0_MCO ((uint8_t)0x00U) /* MCO (MCO1 and MCO2) Alternate Function mapping */
|
||||
#define GPIO_AF0_SWJ ((uint8_t)0x00U) /* SWJ (SWD and JTAG) Alternate Function mapping */
|
||||
#define GPIO_AF0_TRACE ((uint8_t)0x00U) /* TRACE Alternate Function mapping */
|
||||
|
||||
/**
|
||||
* @brief AF 1 selection
|
||||
*/
|
||||
#define GPIO_AF1_TIM1 ((uint8_t)0x01U) /* TIM1 Alternate Function mapping */
|
||||
#define GPIO_AF1_TIM2 ((uint8_t)0x01U) /* TIM2 Alternate Function mapping */
|
||||
#if defined (STM32F765xx) || defined(STM32F767xx) || defined(STM32F769xx) || defined(STM32F777xx) || defined(STM32F779xx)
|
||||
#define GPIO_AF1_UART5 ((uint8_t)0x01U) /* UART5 Alternate Function mapping */
|
||||
#define GPIO_AF1_I2C4 ((uint8_t)0x01U) /* I2C4 Alternate Function mapping */
|
||||
#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
|
||||
|
||||
/**
|
||||
* @brief AF 2 selection
|
||||
*/
|
||||
#define GPIO_AF2_TIM3 ((uint8_t)0x02U) /* TIM3 Alternate Function mapping */
|
||||
#define GPIO_AF2_TIM4 ((uint8_t)0x02U) /* TIM4 Alternate Function mapping */
|
||||
#define GPIO_AF2_TIM5 ((uint8_t)0x02U) /* TIM5 Alternate Function mapping */
|
||||
|
||||
/**
|
||||
* @brief AF 3 selection
|
||||
*/
|
||||
#define GPIO_AF3_TIM8 ((uint8_t)0x03U) /* TIM8 Alternate Function mapping */
|
||||
#define GPIO_AF3_TIM9 ((uint8_t)0x03U) /* TIM9 Alternate Function mapping */
|
||||
#define GPIO_AF3_TIM10 ((uint8_t)0x03U) /* TIM10 Alternate Function mapping */
|
||||
#define GPIO_AF3_TIM11 ((uint8_t)0x03U) /* TIM11 Alternate Function mapping */
|
||||
#define GPIO_AF3_LPTIM1 ((uint8_t)0x03U) /* LPTIM1 Alternate Function mapping */
|
||||
#define GPIO_AF3_CEC ((uint8_t)0x03U) /* CEC Alternate Function mapping */
|
||||
#if defined (STM32F765xx) || defined(STM32F767xx) || defined(STM32F769xx) || defined(STM32F777xx) || defined(STM32F779xx)
|
||||
#define GPIO_AF3_DFSDM1 ((uint8_t)0x03U) /* DFSDM1 Alternate Function mapping */
|
||||
#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
|
||||
/**
|
||||
* @brief AF 4 selection
|
||||
*/
|
||||
#define GPIO_AF4_I2C1 ((uint8_t)0x04U) /* I2C1 Alternate Function mapping */
|
||||
#define GPIO_AF4_I2C2 ((uint8_t)0x04U) /* I2C2 Alternate Function mapping */
|
||||
#define GPIO_AF4_I2C3 ((uint8_t)0x04U) /* I2C3 Alternate Function mapping */
|
||||
#define GPIO_AF4_I2C4 ((uint8_t)0x04U) /* I2C4 Alternate Function mapping */
|
||||
#define GPIO_AF4_CEC ((uint8_t)0x04U) /* CEC Alternate Function mapping */
|
||||
#if defined (STM32F765xx) || defined(STM32F767xx) || defined(STM32F769xx) || defined(STM32F777xx) || defined(STM32F779xx)
|
||||
#define GPIO_AF4_USART1 ((uint8_t)0x04) /* USART1 Alternate Function mapping */
|
||||
#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
|
||||
|
||||
/**
|
||||
* @brief AF 5 selection
|
||||
*/
|
||||
#define GPIO_AF5_SPI1 ((uint8_t)0x05U) /* SPI1 Alternate Function mapping */
|
||||
#define GPIO_AF5_SPI2 ((uint8_t)0x05U) /* SPI2/I2S2 Alternate Function mapping */
|
||||
#define GPIO_AF5_SPI3 ((uint8_t)0x05U) /* SPI3/I2S3 Alternate Function mapping */
|
||||
#define GPIO_AF5_SPI4 ((uint8_t)0x05U) /* SPI4 Alternate Function mapping */
|
||||
#define GPIO_AF5_SPI5 ((uint8_t)0x05U) /* SPI5 Alternate Function mapping */
|
||||
#define GPIO_AF5_SPI6 ((uint8_t)0x05U) /* SPI6 Alternate Function mapping */
|
||||
|
||||
/**
|
||||
* @brief AF 6 selection
|
||||
*/
|
||||
#define GPIO_AF6_SPI3 ((uint8_t)0x06U) /* SPI3/I2S3 Alternate Function mapping */
|
||||
#define GPIO_AF6_SAI1 ((uint8_t)0x06U) /* SAI1 Alternate Function mapping */
|
||||
#if defined (STM32F765xx) || defined(STM32F767xx) || defined(STM32F769xx) || defined(STM32F777xx) || defined(STM32F779xx)
|
||||
#define GPIO_AF6_UART4 ((uint8_t)0x06U) /* UART4 Alternate Function mapping */
|
||||
#define GPIO_AF6_DFSDM1 ((uint8_t)0x06U) /* DFSDM1 Alternate Function mapping */
|
||||
#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
|
||||
|
||||
/**
|
||||
* @brief AF 7 selection
|
||||
*/
|
||||
#define GPIO_AF7_USART1 ((uint8_t)0x07U) /* USART1 Alternate Function mapping */
|
||||
#define GPIO_AF7_USART2 ((uint8_t)0x07U) /* USART2 Alternate Function mapping */
|
||||
#define GPIO_AF7_USART3 ((uint8_t)0x07U) /* USART3 Alternate Function mapping */
|
||||
#define GPIO_AF7_UART5 ((uint8_t)0x07U) /* UART5 Alternate Function mapping */
|
||||
#define GPIO_AF7_SPDIFRX ((uint8_t)0x07U) /* SPDIF-RX Alternate Function mapping */
|
||||
#define GPIO_AF7_SPI2 ((uint8_t)0x07U) /* SPI2 Alternate Function mapping */
|
||||
#define GPIO_AF7_SPI3 ((uint8_t)0x07U) /* SPI3 Alternate Function mapping */
|
||||
#if defined (STM32F765xx) || defined(STM32F767xx) || defined(STM32F769xx) || defined(STM32F777xx) || defined(STM32F779xx)
|
||||
#define GPIO_AF7_SPI6 ((uint8_t)0x07U) /* SPI6 Alternate Function mapping */
|
||||
#define GPIO_AF7_DFSDM1 ((uint8_t)0x07U) /* DFSDM1 Alternate Function mapping */
|
||||
#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
|
||||
|
||||
/**
|
||||
* @brief AF 8 selection
|
||||
*/
|
||||
#define GPIO_AF8_UART4 ((uint8_t)0x08U) /* UART4 Alternate Function mapping */
|
||||
#define GPIO_AF8_UART5 ((uint8_t)0x08U) /* UART5 Alternate Function mapping */
|
||||
#define GPIO_AF8_USART6 ((uint8_t)0x08U) /* USART6 Alternate Function mapping */
|
||||
#define GPIO_AF8_UART7 ((uint8_t)0x08U) /* UART7 Alternate Function mapping */
|
||||
#define GPIO_AF8_UART8 ((uint8_t)0x08U) /* UART8 Alternate Function mapping */
|
||||
#define GPIO_AF8_SPDIFRX ((uint8_t)0x08U) /* SPIDIF-RX Alternate Function mapping */
|
||||
#define GPIO_AF8_SAI2 ((uint8_t)0x08U) /* SAI2 Alternate Function mapping */
|
||||
#if defined (STM32F765xx) || defined(STM32F767xx) || defined(STM32F769xx) || defined(STM32F777xx) || defined(STM32F779xx)
|
||||
#define GPIO_AF8_SPI6 ((uint8_t)0x08U) /* SPI6 Alternate Function mapping */
|
||||
#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
|
||||
|
||||
|
||||
/**
|
||||
* @brief AF 9 selection
|
||||
*/
|
||||
#define GPIO_AF9_CAN1 ((uint8_t)0x09U) /* CAN1 Alternate Function mapping */
|
||||
#define GPIO_AF9_CAN2 ((uint8_t)0x09U) /* CAN2 Alternate Function mapping */
|
||||
#define GPIO_AF9_TIM12 ((uint8_t)0x09U) /* TIM12 Alternate Function mapping */
|
||||
#define GPIO_AF9_TIM13 ((uint8_t)0x09U) /* TIM13 Alternate Function mapping */
|
||||
#define GPIO_AF9_TIM14 ((uint8_t)0x09U) /* TIM14 Alternate Function mapping */
|
||||
#define GPIO_AF9_QUADSPI ((uint8_t)0x09U) /* QUADSPI Alternate Function mapping */
|
||||
#if defined(STM32F746xx) || defined(STM32F756xx) || defined(STM32F767xx) || defined(STM32F769xx) || defined(STM32F777xx) || defined(STM32F779xx) || defined(STM32F750xx)
|
||||
#define GPIO_AF9_LTDC ((uint8_t)0x09U) /* LCD-TFT Alternate Function mapping */
|
||||
#endif /* STM32F746xx || STM32F756xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx || STM32F750xx */
|
||||
#if defined(STM32F746xx) || defined(STM32F756xx) || defined(STM32F765xx) || defined(STM32F765xx) || defined(STM32F767xx) || defined(STM32F769xx) || defined(STM32F777xx) || defined(STM32F779xx) || defined(STM32F750xx)
|
||||
#define GPIO_AF9_FMC ((uint8_t)0x09U) /* FMC Alternate Function mapping */
|
||||
#endif /* STM32F746xx || STM32F756xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx || STM32F750xx */
|
||||
/**
|
||||
* @brief AF 10 selection
|
||||
*/
|
||||
#define GPIO_AF10_OTG_FS ((uint8_t)0xAU) /* OTG_FS Alternate Function mapping */
|
||||
#define GPIO_AF10_OTG_HS ((uint8_t)0xAU) /* OTG_HS Alternate Function mapping */
|
||||
#define GPIO_AF10_QUADSPI ((uint8_t)0xAU) /* QUADSPI Alternate Function mapping */
|
||||
#define GPIO_AF10_SAI2 ((uint8_t)0xAU) /* SAI2 Alternate Function mapping */
|
||||
#if defined (STM32F765xx) || defined(STM32F767xx) || defined(STM32F769xx) || defined(STM32F777xx) || defined(STM32F779xx)
|
||||
#define GPIO_AF10_DFSDM1 ((uint8_t)0x0AU) /* DFSDM1 Alternate Function mapping */
|
||||
#define GPIO_AF10_SDMMC2 ((uint8_t)0x0AU) /* SDMMC2 Alternate Function mapping */
|
||||
#define GPIO_AF10_LTDC ((uint8_t)0x0AU) /* LCD-TFT Alternate Function mapping */
|
||||
#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
|
||||
|
||||
/**
|
||||
* @brief AF 11 selection
|
||||
*/
|
||||
#define GPIO_AF11_ETH ((uint8_t)0x0BU) /* ETHERNET Alternate Function mapping */
|
||||
#if defined(STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
|
||||
#define GPIO_AF11_CAN3 ((uint8_t)0x0BU) /* CAN3 Alternate Function mapping */
|
||||
#define GPIO_AF11_SDMMC2 ((uint8_t)0x0BU) /* SDMMC2 Alternate Function mapping */
|
||||
#define GPIO_AF11_I2C4 ((uint8_t)0x0BU) /* I2C4 Alternate Function mapping */
|
||||
#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
|
||||
|
||||
/**
|
||||
* @brief AF 12 selection
|
||||
*/
|
||||
#define GPIO_AF12_FMC ((uint8_t)0xCU) /* FMC Alternate Function mapping */
|
||||
#define GPIO_AF12_OTG_HS_FS ((uint8_t)0xCU) /* OTG HS configured in FS, Alternate Function mapping */
|
||||
#define GPIO_AF12_SDMMC1 ((uint8_t)0xCU) /* SDMMC1 Alternate Function mapping */
|
||||
#if defined(STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
|
||||
#define GPIO_AF12_MDIOS ((uint8_t)0xCU) /* SDMMC1 Alternate Function mapping */
|
||||
#define GPIO_AF12_UART7 ((uint8_t)0xCU) /* UART7 Alternate Function mapping */
|
||||
#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
|
||||
|
||||
/**
|
||||
* @brief AF 13 selection
|
||||
*/
|
||||
#define GPIO_AF13_DCMI ((uint8_t)0x0DU) /* DCMI Alternate Function mapping */
|
||||
#if defined (STM32F769xx) || defined (STM32F779xx)
|
||||
#define GPIO_AF13_DSI ((uint8_t)0x0DU) /* DSI Alternate Function mapping */
|
||||
#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
|
||||
#if defined(STM32F746xx) || defined(STM32F756xx) || defined(STM32F767xx) || defined(STM32F769xx) || defined(STM32F777xx) || defined(STM32F779xx) || defined(STM32F750xx)
|
||||
#define GPIO_AF13_LTDC ((uint8_t)0x0DU) /* LTDC Alternate Function mapping */
|
||||
|
||||
/**
|
||||
* @brief AF 14 selection
|
||||
*/
|
||||
#define GPIO_AF14_LTDC ((uint8_t)0x0EU) /* LCD-TFT Alternate Function mapping */
|
||||
#endif /* STM32F746xx || STM32F756xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx || STM32F750xx */
|
||||
/**
|
||||
* @brief AF 15 selection
|
||||
*/
|
||||
#define GPIO_AF15_EVENTOUT ((uint8_t)0x0FU) /* EVENTOUT Alternate Function mapping */
|
||||
#endif /* STM32F745xx || STM32F746xx || STM32F756xx || STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
|
||||
/*----------------------------------------------------------------------------*/
|
||||
|
||||
/*---------------------------- STM32F72xxx/STM32F73xxx -----------------------*/
|
||||
#if defined(STM32F722xx) || defined(STM32F723xx) || defined(STM32F732xx) || defined(STM32F733xx) || defined(STM32F730xx)
|
||||
/**
|
||||
* @brief AF 0 selection
|
||||
*/
|
||||
#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00U) /* RTC_50Hz Alternate Function mapping */
|
||||
#define GPIO_AF0_MCO ((uint8_t)0x00U) /* MCO (MCO1 and MCO2) Alternate Function mapping */
|
||||
#define GPIO_AF0_SWJ ((uint8_t)0x00U) /* SWJ (SWD and JTAG) Alternate Function mapping */
|
||||
#define GPIO_AF0_TRACE ((uint8_t)0x00U) /* TRACE Alternate Function mapping */
|
||||
|
||||
/**
|
||||
* @brief AF 1 selection
|
||||
*/
|
||||
#define GPIO_AF1_TIM1 ((uint8_t)0x01U) /* TIM1 Alternate Function mapping */
|
||||
#define GPIO_AF1_TIM2 ((uint8_t)0x01U) /* TIM2 Alternate Function mapping */
|
||||
|
||||
/**
|
||||
* @brief AF 2 selection
|
||||
*/
|
||||
#define GPIO_AF2_TIM3 ((uint8_t)0x02U) /* TIM3 Alternate Function mapping */
|
||||
#define GPIO_AF2_TIM4 ((uint8_t)0x02U) /* TIM4 Alternate Function mapping */
|
||||
#define GPIO_AF2_TIM5 ((uint8_t)0x02U) /* TIM5 Alternate Function mapping */
|
||||
|
||||
/**
|
||||
* @brief AF 3 selection
|
||||
*/
|
||||
#define GPIO_AF3_TIM8 ((uint8_t)0x03U) /* TIM8 Alternate Function mapping */
|
||||
#define GPIO_AF3_TIM9 ((uint8_t)0x03U) /* TIM9 Alternate Function mapping */
|
||||
#define GPIO_AF3_TIM10 ((uint8_t)0x03U) /* TIM10 Alternate Function mapping */
|
||||
#define GPIO_AF3_TIM11 ((uint8_t)0x03U) /* TIM11 Alternate Function mapping */
|
||||
#define GPIO_AF3_LPTIM1 ((uint8_t)0x03U) /* LPTIM1 Alternate Function mapping */
|
||||
|
||||
/**
|
||||
* @brief AF 4 selection
|
||||
*/
|
||||
#define GPIO_AF4_I2C1 ((uint8_t)0x04U) /* I2C1 Alternate Function mapping */
|
||||
#define GPIO_AF4_I2C2 ((uint8_t)0x04U) /* I2C2 Alternate Function mapping */
|
||||
#define GPIO_AF4_I2C3 ((uint8_t)0x04U) /* I2C3 Alternate Function mapping */
|
||||
|
||||
/**
|
||||
* @brief AF 5 selection
|
||||
*/
|
||||
#define GPIO_AF5_SPI1 ((uint8_t)0x05U) /* SPI1 Alternate Function mapping */
|
||||
#define GPIO_AF5_SPI2 ((uint8_t)0x05U) /* SPI2/I2S2 Alternate Function mapping */
|
||||
#define GPIO_AF5_SPI3 ((uint8_t)0x05U) /* SPI3/I2S3 Alternate Function mapping */
|
||||
#define GPIO_AF5_SPI4 ((uint8_t)0x05U) /* SPI4 Alternate Function mapping */
|
||||
#define GPIO_AF5_SPI5 ((uint8_t)0x05U) /* SPI5 Alternate Function mapping */
|
||||
|
||||
/**
|
||||
* @brief AF 6 selection
|
||||
*/
|
||||
#define GPIO_AF6_SPI3 ((uint8_t)0x06U) /* SPI3/I2S3 Alternate Function mapping */
|
||||
#define GPIO_AF6_SAI1 ((uint8_t)0x06U) /* SAI1 Alternate Function mapping */
|
||||
|
||||
/**
|
||||
* @brief AF 7 selection
|
||||
*/
|
||||
#define GPIO_AF7_USART1 ((uint8_t)0x07U) /* USART1 Alternate Function mapping */
|
||||
#define GPIO_AF7_USART2 ((uint8_t)0x07U) /* USART2 Alternate Function mapping */
|
||||
#define GPIO_AF7_USART3 ((uint8_t)0x07U) /* USART3 Alternate Function mapping */
|
||||
#define GPIO_AF7_UART5 ((uint8_t)0x07U) /* UART5 Alternate Function mapping */
|
||||
#define GPIO_AF7_SPI2 ((uint8_t)0x07U) /* SPI2 Alternate Function mapping */
|
||||
#define GPIO_AF7_SPI3 ((uint8_t)0x07U) /* SPI3 Alternate Function mapping */
|
||||
|
||||
/**
|
||||
* @brief AF 8 selection
|
||||
*/
|
||||
#define GPIO_AF8_UART4 ((uint8_t)0x08U) /* UART4 Alternate Function mapping */
|
||||
#define GPIO_AF8_UART5 ((uint8_t)0x08U) /* UART5 Alternate Function mapping */
|
||||
#define GPIO_AF8_USART6 ((uint8_t)0x08U) /* USART6 Alternate Function mapping */
|
||||
#define GPIO_AF8_UART7 ((uint8_t)0x08U) /* UART7 Alternate Function mapping */
|
||||
#define GPIO_AF8_UART8 ((uint8_t)0x08U) /* UART8 Alternate Function mapping */
|
||||
#define GPIO_AF8_SAI2 ((uint8_t)0x08U) /* SAI2 Alternate Function mapping */
|
||||
|
||||
/**
|
||||
* @brief AF 9 selection
|
||||
*/
|
||||
#define GPIO_AF9_CAN1 ((uint8_t)0x09U) /* CAN1 Alternate Function mapping */
|
||||
#define GPIO_AF9_TIM12 ((uint8_t)0x09U) /* TIM12 Alternate Function mapping */
|
||||
#define GPIO_AF9_TIM13 ((uint8_t)0x09U) /* TIM13 Alternate Function mapping */
|
||||
#define GPIO_AF9_TIM14 ((uint8_t)0x09U) /* TIM14 Alternate Function mapping */
|
||||
#define GPIO_AF9_QUADSPI ((uint8_t)0x09U) /* QUADSPI Alternate Function mapping */
|
||||
|
||||
/**
|
||||
* @brief AF 10 selection
|
||||
*/
|
||||
#define GPIO_AF10_OTG_FS ((uint8_t)0xAU) /* OTG_FS Alternate Function mapping */
|
||||
#define GPIO_AF10_OTG_HS ((uint8_t)0xAU) /* OTG_HS Alternate Function mapping */
|
||||
#define GPIO_AF10_QUADSPI ((uint8_t)0xAU) /* QUADSPI Alternate Function mapping */
|
||||
#define GPIO_AF10_SAI2 ((uint8_t)0xAU) /* SAI2 Alternate Function mapping */
|
||||
#define GPIO_AF10_SDMMC2 ((uint8_t)0x0AU) /* SDMMC2 Alternate Function mapping */
|
||||
|
||||
/**
|
||||
* @brief AF 11 selection
|
||||
*/
|
||||
#define GPIO_AF11_SDMMC2 ((uint8_t)0x0BU) /* SDMMC2 Alternate Function mapping */
|
||||
|
||||
/**
|
||||
* @brief AF 12 selection
|
||||
*/
|
||||
#define GPIO_AF12_FMC ((uint8_t)0xCU) /* FMC Alternate Function mapping */
|
||||
#define GPIO_AF12_OTG_HS_FS ((uint8_t)0xCU) /* OTG HS configured in FS, Alternate Function mapping */
|
||||
#define GPIO_AF12_SDMMC1 ((uint8_t)0xCU) /* SDMMC1 Alternate Function mapping */
|
||||
|
||||
/**
|
||||
* @brief AF 13 selection
|
||||
*/
|
||||
#define GPIO_AF13_RNG ((uint8_t)0x0DU) /* RNG Alternate Function mapping */
|
||||
|
||||
/**
|
||||
* @brief AF 15 selection
|
||||
*/
|
||||
#define GPIO_AF15_EVENTOUT ((uint8_t)0x0FU) /* EVENTOUT Alternate Function mapping */
|
||||
#endif /* STM32F722xx || STM32F723xx || STM32F732xx || STM32F733xx || STM32F730xx */
|
||||
/*----------------------------------------------------------------------------*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/** @defgroup GPIOEx_Exported_Macros GPIO Exported Macros
|
||||
* @{
|
||||
*/
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @defgroup GPIOEx_Exported_Functions GPIO Exported Functions
|
||||
* @{
|
||||
*/
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/* Private types -------------------------------------------------------------*/
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
/* Private constants ---------------------------------------------------------*/
|
||||
/** @defgroup GPIOEx_Private_Constants GPIO Private Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief GPIO pin available on the platform
|
||||
*/
|
||||
/* Defines the available pins per GPIOs */
|
||||
#define GPIOA_PIN_AVAILABLE GPIO_PIN_All
|
||||
#define GPIOB_PIN_AVAILABLE GPIO_PIN_All
|
||||
#define GPIOC_PIN_AVAILABLE GPIO_PIN_All
|
||||
#define GPIOD_PIN_AVAILABLE GPIO_PIN_All
|
||||
#define GPIOE_PIN_AVAILABLE GPIO_PIN_All
|
||||
#define GPIOF_PIN_AVAILABLE GPIO_PIN_All
|
||||
#define GPIOG_PIN_AVAILABLE GPIO_PIN_All
|
||||
#define GPIOI_PIN_AVAILABLE GPIO_PIN_All
|
||||
#define GPIOJ_PIN_AVAILABLE GPIO_PIN_All
|
||||
#define GPIOH_PIN_AVAILABLE GPIO_PIN_All
|
||||
#define GPIOK_PIN_AVAILABLE (GPIO_PIN_0 | GPIO_PIN_1 | GPIO_PIN_2 | GPIO_PIN_3 | GPIO_PIN_4 | \
|
||||
GPIO_PIN_5 | GPIO_PIN_6 | GPIO_PIN_7)
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private macros ------------------------------------------------------------*/
|
||||
/** @defgroup GPIOEx_Private_Macros GPIO Private Macros
|
||||
* @{
|
||||
*/
|
||||
/** @defgroup GPIOEx_Get_Port_Index GPIO Get Port Index
|
||||
* @{
|
||||
*/
|
||||
#if defined (STM32F745xx) || defined (STM32F746xx) || defined (STM32F756xx) || defined (STM32F765xx) ||\
|
||||
defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx) ||\
|
||||
defined (STM32F750xx)
|
||||
#define GPIO_GET_INDEX(__GPIOx__) (uint8_t)(((__GPIOx__) == (GPIOA))? 0U :\
|
||||
((__GPIOx__) == (GPIOB))? 1U :\
|
||||
((__GPIOx__) == (GPIOC))? 2U :\
|
||||
((__GPIOx__) == (GPIOD))? 3U :\
|
||||
((__GPIOx__) == (GPIOE))? 4U :\
|
||||
((__GPIOx__) == (GPIOF))? 5U :\
|
||||
((__GPIOx__) == (GPIOG))? 6U :\
|
||||
((__GPIOx__) == (GPIOH))? 7U :\
|
||||
((__GPIOx__) == (GPIOI))? 8U :\
|
||||
((__GPIOx__) == (GPIOJ))? 9U : 10U)
|
||||
#endif /* STM32F745xx || STM32F746xx || STM32F756xx || STM32F765xx || STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx || STM32F750xx */
|
||||
|
||||
#if defined (STM32F722xx) || defined (STM32F723xx) || defined (STM32F732xx) || defined (STM32F733xx) || defined (STM32F730xx)
|
||||
#define GPIO_GET_INDEX(__GPIOx__) (uint8_t)(((__GPIOx__) == (GPIOA))? 0U :\
|
||||
((__GPIOx__) == (GPIOB))? 1U :\
|
||||
((__GPIOx__) == (GPIOC))? 2U :\
|
||||
((__GPIOx__) == (GPIOD))? 3U :\
|
||||
((__GPIOx__) == (GPIOE))? 4U :\
|
||||
((__GPIOx__) == (GPIOF))? 5U :\
|
||||
((__GPIOx__) == (GPIOG))? 6U :\
|
||||
((__GPIOx__) == (GPIOH))? 7U : 8U)
|
||||
#endif /* STM32F722xx || STM32F723xx || STM32F732xx || STM32F733xx || STM32F730xx */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#define IS_GPIO_PIN_AVAILABLE(__INSTANCE__,__PIN__) \
|
||||
((((__INSTANCE__) == GPIOA) && (((__PIN__) & (GPIOA_PIN_AVAILABLE)) != 0) && (((__PIN__) | (GPIOA_PIN_AVAILABLE)) == (GPIOA_PIN_AVAILABLE))) || \
|
||||
(((__INSTANCE__) == GPIOB) && (((__PIN__) & (GPIOB_PIN_AVAILABLE)) != 0) && (((__PIN__) | (GPIOB_PIN_AVAILABLE)) == (GPIOB_PIN_AVAILABLE))) || \
|
||||
(((__INSTANCE__) == GPIOC) && (((__PIN__) & (GPIOC_PIN_AVAILABLE)) != 0) && (((__PIN__) | (GPIOC_PIN_AVAILABLE)) == (GPIOC_PIN_AVAILABLE))) || \
|
||||
(((__INSTANCE__) == GPIOD) && (((__PIN__) & (GPIOD_PIN_AVAILABLE)) != 0) && (((__PIN__) | (GPIOD_PIN_AVAILABLE)) == (GPIOD_PIN_AVAILABLE))) || \
|
||||
(((__INSTANCE__) == GPIOE) && (((__PIN__) & (GPIOE_PIN_AVAILABLE)) != 0) && (((__PIN__) | (GPIOE_PIN_AVAILABLE)) == (GPIOE_PIN_AVAILABLE))) || \
|
||||
(((__INSTANCE__) == GPIOF) && (((__PIN__) & (GPIOF_PIN_AVAILABLE)) != 0) && (((__PIN__) | (GPIOF_PIN_AVAILABLE)) == (GPIOF_PIN_AVAILABLE))) || \
|
||||
(((__INSTANCE__) == GPIOG) && (((__PIN__) & (GPIOG_PIN_AVAILABLE)) != 0) && (((__PIN__) | (GPIOG_PIN_AVAILABLE)) == (GPIOG_PIN_AVAILABLE))) || \
|
||||
(((__INSTANCE__) == GPIOI) && (((__PIN__) & (GPIOI_PIN_AVAILABLE)) != 0) && (((__PIN__) | (GPIOI_PIN_AVAILABLE)) == (GPIOI_PIN_AVAILABLE))) || \
|
||||
(((__INSTANCE__) == GPIOJ) && (((__PIN__) & (GPIOJ_PIN_AVAILABLE)) != 0) && (((__PIN__) | (GPIOJ_PIN_AVAILABLE)) == (GPIOJ_PIN_AVAILABLE))) || \
|
||||
(((__INSTANCE__) == GPIOK) && (((__PIN__) & (GPIOK_PIN_AVAILABLE)) != 0) && (((__PIN__) | (GPIOK_PIN_AVAILABLE)) == (GPIOK_PIN_AVAILABLE))) || \
|
||||
(((__INSTANCE__) == GPIOH) && (((__PIN__) & (GPIOH_PIN_AVAILABLE)) != 0) && (((__PIN__) | (GPIOH_PIN_AVAILABLE)) == (GPIOH_PIN_AVAILABLE))))
|
||||
/** @defgroup GPIOEx_IS_Alternat_function_selection GPIO Check Alternate Function
|
||||
* @{
|
||||
*/
|
||||
#if defined(STM32F756xx) || defined(STM32F746xx) || defined(STM32F750xx)
|
||||
#define IS_GPIO_AF(AF) (((AF) == GPIO_AF0_RTC_50Hz) || ((AF) == GPIO_AF1_TIM1) || \
|
||||
((AF) == GPIO_AF0_SWJ) || ((AF) == GPIO_AF0_TRACE) || \
|
||||
((AF) == GPIO_AF0_MCO) || ((AF) == GPIO_AF1_TIM2) || \
|
||||
((AF) == GPIO_AF2_TIM3) || ((AF) == GPIO_AF2_TIM4) || \
|
||||
((AF) == GPIO_AF2_TIM5) || ((AF) == GPIO_AF3_TIM8) || \
|
||||
((AF) == GPIO_AF3_TIM9) || ((AF) == GPIO_AF3_TIM10) || \
|
||||
((AF) == GPIO_AF3_TIM11) || ((AF) == GPIO_AF3_LPTIM1) || \
|
||||
((AF) == GPIO_AF3_CEC) || ((AF) == GPIO_AF4_CEC) || \
|
||||
((AF) == GPIO_AF4_I2C1) || ((AF) == GPIO_AF4_I2C2) || \
|
||||
((AF) == GPIO_AF4_I2C3) || ((AF) == GPIO_AF4_I2C4) || \
|
||||
((AF) == GPIO_AF5_SPI1) || ((AF) == GPIO_AF5_SPI2) || \
|
||||
((AF) == GPIO_AF5_SPI3) || ((AF) == GPIO_AF5_SPI4) || \
|
||||
((AF) == GPIO_AF5_SPI5) || ((AF) == GPIO_AF5_SPI6) || \
|
||||
((AF) == GPIO_AF6_SPI3) || ((AF) == GPIO_AF6_SAI1) || \
|
||||
((AF) == GPIO_AF7_SPI3) || ((AF) == GPIO_AF7_SPI2) || \
|
||||
((AF) == GPIO_AF7_USART1) || ((AF) == GPIO_AF7_USART2) || \
|
||||
((AF) == GPIO_AF7_USART3) || ((AF) == GPIO_AF7_UART5) || \
|
||||
((AF) == GPIO_AF7_SPDIFRX) || ((AF) == GPIO_AF8_SPDIFRX) || \
|
||||
((AF) == GPIO_AF8_SAI2) || ((AF) == GPIO_AF8_USART6) || \
|
||||
((AF) == GPIO_AF8_UART4) || ((AF) == GPIO_AF8_UART5) || \
|
||||
((AF) == GPIO_AF8_UART7) || ((AF) == GPIO_AF8_UART8) || \
|
||||
((AF) == GPIO_AF9_CAN1) || ((AF) == GPIO_AF9_CAN2) || \
|
||||
((AF) == GPIO_AF9_TIM12) || ((AF) == GPIO_AF9_TIM12) || \
|
||||
((AF) == GPIO_AF9_TIM14) || ((AF) == GPIO_AF9_QUADSPI) || \
|
||||
((AF) == GPIO_AF9_LTDC) || ((AF) == GPIO_AF10_OTG_FS) || \
|
||||
((AF) == GPIO_AF10_OTG_HS) || ((AF) == GPIO_AF10_SAI2) || \
|
||||
((AF) == GPIO_AF10_QUADSPI) || ((AF) == GPIO_AF11_ETH) || \
|
||||
((AF) == GPIO_AF12_OTG_HS_FS) || ((AF) == GPIO_AF12_SDMMC1) || \
|
||||
((AF) == GPIO_AF12_FMC) || ((AF) == GPIO_AF15_EVENTOUT) || \
|
||||
((AF) == GPIO_AF13_DCMI) || ((AF) == GPIO_AF14_LTDC))
|
||||
#elif defined(STM32F745xx)
|
||||
#define IS_GPIO_AF(AF) (((AF) == GPIO_AF0_RTC_50Hz) || ((AF) == GPIO_AF1_TIM1) || \
|
||||
((AF) == GPIO_AF0_SWJ) || ((AF) == GPIO_AF0_TRACE) || \
|
||||
((AF) == GPIO_AF0_MCO) || ((AF) == GPIO_AF1_TIM2) || \
|
||||
((AF) == GPIO_AF2_TIM3) || ((AF) == GPIO_AF2_TIM4) || \
|
||||
((AF) == GPIO_AF2_TIM5) || ((AF) == GPIO_AF3_TIM8) || \
|
||||
((AF) == GPIO_AF3_TIM9) || ((AF) == GPIO_AF3_TIM10) || \
|
||||
((AF) == GPIO_AF3_TIM11) || ((AF) == GPIO_AF3_LPTIM1) || \
|
||||
((AF) == GPIO_AF3_CEC) || ((AF) == GPIO_AF4_CEC) || \
|
||||
((AF) == GPIO_AF4_I2C1) || ((AF) == GPIO_AF4_I2C2) || \
|
||||
((AF) == GPIO_AF4_I2C3) || ((AF) == GPIO_AF4_I2C4) || \
|
||||
((AF) == GPIO_AF5_SPI1) || ((AF) == GPIO_AF5_SPI2) || \
|
||||
((AF) == GPIO_AF5_SPI3) || ((AF) == GPIO_AF5_SPI4) || \
|
||||
((AF) == GPIO_AF5_SPI5) || ((AF) == GPIO_AF5_SPI6) || \
|
||||
((AF) == GPIO_AF6_SPI3) || ((AF) == GPIO_AF6_SAI1) || \
|
||||
((AF) == GPIO_AF7_SPI3) || ((AF) == GPIO_AF7_SPI2) || \
|
||||
((AF) == GPIO_AF7_USART1) || ((AF) == GPIO_AF7_USART2) || \
|
||||
((AF) == GPIO_AF7_USART3) || ((AF) == GPIO_AF7_UART5) || \
|
||||
((AF) == GPIO_AF7_SPDIFRX) || ((AF) == GPIO_AF8_SPDIFRX) || \
|
||||
((AF) == GPIO_AF8_SAI2) || ((AF) == GPIO_AF8_USART6) || \
|
||||
((AF) == GPIO_AF8_UART4) || ((AF) == GPIO_AF8_UART5) || \
|
||||
((AF) == GPIO_AF8_UART7) || ((AF) == GPIO_AF8_UART8) || \
|
||||
((AF) == GPIO_AF9_CAN1) || ((AF) == GPIO_AF9_CAN2) || \
|
||||
((AF) == GPIO_AF9_TIM12) || ((AF) == GPIO_AF9_TIM12) || \
|
||||
((AF) == GPIO_AF9_TIM14) || ((AF) == GPIO_AF9_QUADSPI) || \
|
||||
((AF) == GPIO_AF13_DCMI) || ((AF) == GPIO_AF10_OTG_FS) || \
|
||||
((AF) == GPIO_AF10_OTG_HS) || ((AF) == GPIO_AF10_SAI2) || \
|
||||
((AF) == GPIO_AF10_QUADSPI) || ((AF) == GPIO_AF11_ETH) || \
|
||||
((AF) == GPIO_AF12_OTG_HS_FS) || ((AF) == GPIO_AF12_SDMMC1) || \
|
||||
((AF) == GPIO_AF12_FMC) || ((AF) == GPIO_AF15_EVENTOUT))
|
||||
#elif defined(STM32F767xx) || defined(STM32F777xx)
|
||||
#define IS_GPIO_AF(AF) (((AF) == GPIO_AF0_RTC_50Hz) || ((AF) == GPIO_AF1_TIM1) || \
|
||||
((AF) == GPIO_AF0_SWJ) || ((AF) == GPIO_AF0_TRACE) || \
|
||||
((AF) == GPIO_AF0_MCO) || ((AF) == GPIO_AF1_TIM2) || \
|
||||
((AF) == GPIO_AF2_TIM3) || ((AF) == GPIO_AF2_TIM4) || \
|
||||
((AF) == GPIO_AF2_TIM5) || ((AF) == GPIO_AF3_TIM8) || \
|
||||
((AF) == GPIO_AF3_TIM9) || ((AF) == GPIO_AF3_TIM10) || \
|
||||
((AF) == GPIO_AF3_TIM11) || ((AF) == GPIO_AF3_LPTIM1) || \
|
||||
((AF) == GPIO_AF3_CEC) || ((AF) == GPIO_AF4_CEC) || \
|
||||
((AF) == GPIO_AF4_I2C1) || ((AF) == GPIO_AF4_I2C2) || \
|
||||
((AF) == GPIO_AF4_I2C3) || ((AF) == GPIO_AF4_I2C4) || \
|
||||
((AF) == GPIO_AF5_SPI1) || ((AF) == GPIO_AF5_SPI2) || \
|
||||
((AF) == GPIO_AF5_SPI3) || ((AF) == GPIO_AF5_SPI4) || \
|
||||
((AF) == GPIO_AF5_SPI5) || ((AF) == GPIO_AF5_SPI6) || \
|
||||
((AF) == GPIO_AF6_SPI3) || ((AF) == GPIO_AF6_SAI1) || \
|
||||
((AF) == GPIO_AF7_SPI3) || ((AF) == GPIO_AF7_SPI2) || \
|
||||
((AF) == GPIO_AF7_USART1) || ((AF) == GPIO_AF7_USART2) || \
|
||||
((AF) == GPIO_AF7_USART3) || ((AF) == GPIO_AF7_UART5) || \
|
||||
((AF) == GPIO_AF7_SPDIFRX) || ((AF) == GPIO_AF8_SPDIFRX) || \
|
||||
((AF) == GPIO_AF8_SAI2) || ((AF) == GPIO_AF8_USART6) || \
|
||||
((AF) == GPIO_AF8_UART4) || ((AF) == GPIO_AF8_UART5) || \
|
||||
((AF) == GPIO_AF8_UART7) || ((AF) == GPIO_AF8_UART8) || \
|
||||
((AF) == GPIO_AF9_CAN1) || ((AF) == GPIO_AF9_CAN2) || \
|
||||
((AF) == GPIO_AF9_TIM12) || ((AF) == GPIO_AF9_TIM12) || \
|
||||
((AF) == GPIO_AF9_TIM14) || ((AF) == GPIO_AF9_QUADSPI) || \
|
||||
((AF) == GPIO_AF10_OTG_FS) || ((AF) == GPIO_AF9_LTDC) || \
|
||||
((AF) == GPIO_AF10_OTG_HS) || ((AF) == GPIO_AF10_SAI2) || \
|
||||
((AF) == GPIO_AF10_QUADSPI) || ((AF) == GPIO_AF11_ETH) || \
|
||||
((AF) == GPIO_AF10_SDMMC2) || ((AF) == GPIO_AF11_SDMMC2) || \
|
||||
((AF) == GPIO_AF11_CAN3) || ((AF) == GPIO_AF12_OTG_HS_FS) || \
|
||||
((AF) == GPIO_AF12_SDMMC1) || ((AF) == GPIO_AF12_FMC) || \
|
||||
((AF) == GPIO_AF15_EVENTOUT) || ((AF) == GPIO_AF13_DCMI) || \
|
||||
((AF) == GPIO_AF14_LTDC))
|
||||
#elif defined(STM32F769xx) || defined(STM32F779xx)
|
||||
#define IS_GPIO_AF(AF) (((AF) == GPIO_AF0_RTC_50Hz) || ((AF) == GPIO_AF1_TIM1) || \
|
||||
((AF) == GPIO_AF0_SWJ) || ((AF) == GPIO_AF0_TRACE) || \
|
||||
((AF) == GPIO_AF0_MCO) || ((AF) == GPIO_AF1_TIM2) || \
|
||||
((AF) == GPIO_AF2_TIM3) || ((AF) == GPIO_AF2_TIM4) || \
|
||||
((AF) == GPIO_AF2_TIM5) || ((AF) == GPIO_AF3_TIM8) || \
|
||||
((AF) == GPIO_AF3_TIM9) || ((AF) == GPIO_AF3_TIM10) || \
|
||||
((AF) == GPIO_AF3_TIM11) || ((AF) == GPIO_AF3_LPTIM1) || \
|
||||
((AF) == GPIO_AF3_CEC) || ((AF) == GPIO_AF4_CEC) || \
|
||||
((AF) == GPIO_AF4_I2C1) || ((AF) == GPIO_AF4_I2C2) || \
|
||||
((AF) == GPIO_AF4_I2C3) || ((AF) == GPIO_AF4_I2C4) || \
|
||||
((AF) == GPIO_AF5_SPI1) || ((AF) == GPIO_AF5_SPI2) || \
|
||||
((AF) == GPIO_AF5_SPI3) || ((AF) == GPIO_AF5_SPI4) || \
|
||||
((AF) == GPIO_AF5_SPI5) || ((AF) == GPIO_AF5_SPI6) || \
|
||||
((AF) == GPIO_AF6_SPI3) || ((AF) == GPIO_AF6_SAI1) || \
|
||||
((AF) == GPIO_AF7_SPI3) || ((AF) == GPIO_AF7_SPI2) || \
|
||||
((AF) == GPIO_AF7_USART1) || ((AF) == GPIO_AF7_USART2) || \
|
||||
((AF) == GPIO_AF7_USART3) || ((AF) == GPIO_AF7_UART5) || \
|
||||
((AF) == GPIO_AF7_SPDIFRX) || ((AF) == GPIO_AF8_SPDIFRX) || \
|
||||
((AF) == GPIO_AF8_SAI2) || ((AF) == GPIO_AF8_USART6) || \
|
||||
((AF) == GPIO_AF8_UART4) || ((AF) == GPIO_AF8_UART5) || \
|
||||
((AF) == GPIO_AF8_UART7) || ((AF) == GPIO_AF8_UART8) || \
|
||||
((AF) == GPIO_AF9_CAN1) || ((AF) == GPIO_AF9_CAN2) || \
|
||||
((AF) == GPIO_AF9_TIM12) || ((AF) == GPIO_AF9_TIM12) || \
|
||||
((AF) == GPIO_AF9_TIM14) || ((AF) == GPIO_AF9_QUADSPI) || \
|
||||
((AF) == GPIO_AF9_LTDC) || ((AF) == GPIO_AF10_OTG_FS) || \
|
||||
((AF) == GPIO_AF10_OTG_HS) || ((AF) == GPIO_AF10_SAI2) || \
|
||||
((AF) == GPIO_AF10_QUADSPI) || ((AF) == GPIO_AF11_ETH) || \
|
||||
((AF) == GPIO_AF10_SDMMC2) || ((AF) == GPIO_AF11_SDMMC2) || \
|
||||
((AF) == GPIO_AF11_CAN3) || ((AF) == GPIO_AF12_OTG_HS_FS) || \
|
||||
((AF) == GPIO_AF12_SDMMC1) || ((AF) == GPIO_AF12_FMC) || \
|
||||
((AF) == GPIO_AF15_EVENTOUT) || ((AF) == GPIO_AF13_DCMI) || \
|
||||
((AF) == GPIO_AF14_LTDC) || ((AF) == GPIO_AF13_DSI))
|
||||
#elif defined(STM32F765xx)
|
||||
#define IS_GPIO_AF(AF) (((AF) == GPIO_AF0_RTC_50Hz) || ((AF) == GPIO_AF1_TIM1) || \
|
||||
((AF) == GPIO_AF0_SWJ) || ((AF) == GPIO_AF0_TRACE) || \
|
||||
((AF) == GPIO_AF0_MCO) || ((AF) == GPIO_AF1_TIM2) || \
|
||||
((AF) == GPIO_AF2_TIM3) || ((AF) == GPIO_AF2_TIM4) || \
|
||||
((AF) == GPIO_AF2_TIM5) || ((AF) == GPIO_AF3_TIM8) || \
|
||||
((AF) == GPIO_AF3_TIM9) || ((AF) == GPIO_AF3_TIM10) || \
|
||||
((AF) == GPIO_AF3_TIM11) || ((AF) == GPIO_AF3_LPTIM1) || \
|
||||
((AF) == GPIO_AF3_CEC) || ((AF) == GPIO_AF4_CEC) || \
|
||||
((AF) == GPIO_AF4_I2C1) || ((AF) == GPIO_AF4_I2C2) || \
|
||||
((AF) == GPIO_AF4_I2C3) || ((AF) == GPIO_AF4_I2C4) || \
|
||||
((AF) == GPIO_AF5_SPI1) || ((AF) == GPIO_AF5_SPI2) || \
|
||||
((AF) == GPIO_AF5_SPI3) || ((AF) == GPIO_AF5_SPI4) || \
|
||||
((AF) == GPIO_AF5_SPI5) || ((AF) == GPIO_AF5_SPI6) || \
|
||||
((AF) == GPIO_AF6_SPI3) || ((AF) == GPIO_AF6_SAI1) || \
|
||||
((AF) == GPIO_AF7_SPI3) || ((AF) == GPIO_AF7_SPI2) || \
|
||||
((AF) == GPIO_AF7_USART1) || ((AF) == GPIO_AF7_USART2) || \
|
||||
((AF) == GPIO_AF7_USART3) || ((AF) == GPIO_AF7_UART5) || \
|
||||
((AF) == GPIO_AF7_SPDIFRX) || ((AF) == GPIO_AF8_SPDIFRX) || \
|
||||
((AF) == GPIO_AF8_SAI2) || ((AF) == GPIO_AF8_USART6) || \
|
||||
((AF) == GPIO_AF8_UART4) || ((AF) == GPIO_AF8_UART5) || \
|
||||
((AF) == GPIO_AF8_UART7) || ((AF) == GPIO_AF8_UART8) || \
|
||||
((AF) == GPIO_AF9_CAN1) || ((AF) == GPIO_AF9_CAN2) || \
|
||||
((AF) == GPIO_AF9_TIM12) || ((AF) == GPIO_AF9_TIM12) || \
|
||||
((AF) == GPIO_AF9_TIM14) || ((AF) == GPIO_AF9_QUADSPI) || \
|
||||
((AF) == GPIO_AF10_OTG_HS) || ((AF) == GPIO_AF10_SAI2) || \
|
||||
((AF) == GPIO_AF10_QUADSPI) || ((AF) == GPIO_AF11_ETH) || \
|
||||
((AF) == GPIO_AF10_SDMMC2) || ((AF) == GPIO_AF11_SDMMC2) || \
|
||||
((AF) == GPIO_AF11_CAN3) || ((AF) == GPIO_AF12_OTG_HS_FS) || \
|
||||
((AF) == GPIO_AF12_SDMMC1) || ((AF) == GPIO_AF12_FMC) || \
|
||||
((AF) == GPIO_AF15_EVENTOUT) || ((AF) == GPIO_AF13_DCMI) || \
|
||||
((AF) == GPIO_AF10_OTG_FS))
|
||||
#elif defined (STM32F722xx) || defined (STM32F723xx) || defined (STM32F732xx) || defined (STM32F733xx) || defined (STM32F730xx)
|
||||
#define IS_GPIO_AF(AF) (((AF) == GPIO_AF0_RTC_50Hz) || ((AF) == GPIO_AF1_TIM1) || \
|
||||
((AF) == GPIO_AF0_SWJ) || ((AF) == GPIO_AF0_TRACE) || \
|
||||
((AF) == GPIO_AF0_MCO) || ((AF) == GPIO_AF1_TIM2) || \
|
||||
((AF) == GPIO_AF2_TIM3) || ((AF) == GPIO_AF2_TIM4) || \
|
||||
((AF) == GPIO_AF2_TIM5) || ((AF) == GPIO_AF3_TIM8) || \
|
||||
((AF) == GPIO_AF3_TIM9) || ((AF) == GPIO_AF3_TIM10) || \
|
||||
((AF) == GPIO_AF3_TIM11) || ((AF) == GPIO_AF3_LPTIM1) || \
|
||||
((AF) == GPIO_AF4_I2C1) || ((AF) == GPIO_AF4_I2C2) || \
|
||||
((AF) == GPIO_AF4_I2C3) || ((AF) == GPIO_AF5_SPI1) || \
|
||||
((AF) == GPIO_AF5_SPI2) || ((AF) == GPIO_AF5_SPI3) || \
|
||||
((AF) == GPIO_AF5_SPI4) || ((AF) == GPIO_AF5_SPI5) || \
|
||||
((AF) == GPIO_AF6_SPI3) || ((AF) == GPIO_AF6_SAI1) || \
|
||||
((AF) == GPIO_AF7_SPI3) || ((AF) == GPIO_AF7_SPI2) || \
|
||||
((AF) == GPIO_AF7_USART1) || ((AF) == GPIO_AF7_USART2) || \
|
||||
((AF) == GPIO_AF7_USART3) || ((AF) == GPIO_AF7_UART5) || \
|
||||
((AF) == GPIO_AF8_SAI2) || ((AF) == GPIO_AF8_USART6) || \
|
||||
((AF) == GPIO_AF8_UART4) || ((AF) == GPIO_AF8_UART5) || \
|
||||
((AF) == GPIO_AF8_UART7) || ((AF) == GPIO_AF8_UART8) || \
|
||||
((AF) == GPIO_AF9_CAN1) || ((AF) == GPIO_AF9_TIM12) || \
|
||||
((AF) == GPIO_AF9_TIM12) || ((AF) == GPIO_AF9_TIM14) || \
|
||||
((AF) == GPIO_AF9_QUADSPI) || ((AF) == GPIO_AF10_OTG_HS) || \
|
||||
((AF) == GPIO_AF10_SAI2) || ((AF) == GPIO_AF10_QUADSPI) || \
|
||||
((AF) == GPIO_AF10_SDMMC2) || ((AF) == GPIO_AF11_SDMMC2) || \
|
||||
((AF) == GPIO_AF12_OTG_HS_FS) || ((AF) == GPIO_AF12_SDMMC1) || \
|
||||
((AF) == GPIO_AF12_FMC) || ((AF) == GPIO_AF15_EVENTOUT) || \
|
||||
((AF) == GPIO_AF10_OTG_FS))
|
||||
#endif /* STM32F756xx || STM32F746xx || STM32F750xx */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private functions ---------------------------------------------------------*/
|
||||
/** @defgroup GPIOEx_Private_Functions GPIO Private Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __STM32F7xx_HAL_GPIO_EX_H */
|
||||
|
||||
839
project/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_i2c.h
Normal file
839
project/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_i2c.h
Normal file
@@ -0,0 +1,839 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f7xx_hal_i2c.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of I2C HAL module.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef STM32F7xx_HAL_I2C_H
|
||||
#define STM32F7xx_HAL_I2C_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f7xx_hal_def.h"
|
||||
|
||||
/** @addtogroup STM32F7xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup I2C
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/** @defgroup I2C_Exported_Types I2C Exported Types
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup I2C_Configuration_Structure_definition I2C Configuration Structure definition
|
||||
* @brief I2C Configuration Structure definition
|
||||
* @{
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint32_t Timing; /*!< Specifies the I2C_TIMINGR_register value.
|
||||
This parameter calculated by referring to I2C initialization section
|
||||
in Reference manual */
|
||||
|
||||
uint32_t OwnAddress1; /*!< Specifies the first device own address.
|
||||
This parameter can be a 7-bit or 10-bit address. */
|
||||
|
||||
uint32_t AddressingMode; /*!< Specifies if 7-bit or 10-bit addressing mode is selected.
|
||||
This parameter can be a value of @ref I2C_ADDRESSING_MODE */
|
||||
|
||||
uint32_t DualAddressMode; /*!< Specifies if dual addressing mode is selected.
|
||||
This parameter can be a value of @ref I2C_DUAL_ADDRESSING_MODE */
|
||||
|
||||
uint32_t OwnAddress2; /*!< Specifies the second device own address if dual addressing mode is selected
|
||||
This parameter can be a 7-bit address. */
|
||||
|
||||
uint32_t OwnAddress2Masks; /*!< Specifies the acknowledge mask address second device own address if dual addressing
|
||||
mode is selected.
|
||||
This parameter can be a value of @ref I2C_OWN_ADDRESS2_MASKS */
|
||||
|
||||
uint32_t GeneralCallMode; /*!< Specifies if general call mode is selected.
|
||||
This parameter can be a value of @ref I2C_GENERAL_CALL_ADDRESSING_MODE */
|
||||
|
||||
uint32_t NoStretchMode; /*!< Specifies if nostretch mode is selected.
|
||||
This parameter can be a value of @ref I2C_NOSTRETCH_MODE */
|
||||
|
||||
} I2C_InitTypeDef;
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup HAL_state_structure_definition HAL state structure definition
|
||||
* @brief HAL State structure definition
|
||||
* @note HAL I2C State value coding follow below described bitmap :\n
|
||||
* b7-b6 Error information\n
|
||||
* 00 : No Error\n
|
||||
* 01 : Abort (Abort user request on going)\n
|
||||
* 10 : Timeout\n
|
||||
* 11 : Error\n
|
||||
* b5 Peripheral initialization status\n
|
||||
* 0 : Reset (peripheral not initialized)\n
|
||||
* 1 : Init done (peripheral initialized and ready to use. HAL I2C Init function called)\n
|
||||
* b4 (not used)\n
|
||||
* x : Should be set to 0\n
|
||||
* b3\n
|
||||
* 0 : Ready or Busy (No Listen mode ongoing)\n
|
||||
* 1 : Listen (peripheral in Address Listen Mode)\n
|
||||
* b2 Intrinsic process state\n
|
||||
* 0 : Ready\n
|
||||
* 1 : Busy (peripheral busy with some configuration or internal operations)\n
|
||||
* b1 Rx state\n
|
||||
* 0 : Ready (no Rx operation ongoing)\n
|
||||
* 1 : Busy (Rx operation ongoing)\n
|
||||
* b0 Tx state\n
|
||||
* 0 : Ready (no Tx operation ongoing)\n
|
||||
* 1 : Busy (Tx operation ongoing)
|
||||
* @{
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
HAL_I2C_STATE_RESET = 0x00U, /*!< Peripheral is not yet Initialized */
|
||||
HAL_I2C_STATE_READY = 0x20U, /*!< Peripheral Initialized and ready for use */
|
||||
HAL_I2C_STATE_BUSY = 0x24U, /*!< An internal process is ongoing */
|
||||
HAL_I2C_STATE_BUSY_TX = 0x21U, /*!< Data Transmission process is ongoing */
|
||||
HAL_I2C_STATE_BUSY_RX = 0x22U, /*!< Data Reception process is ongoing */
|
||||
HAL_I2C_STATE_LISTEN = 0x28U, /*!< Address Listen Mode is ongoing */
|
||||
HAL_I2C_STATE_BUSY_TX_LISTEN = 0x29U, /*!< Address Listen Mode and Data Transmission
|
||||
process is ongoing */
|
||||
HAL_I2C_STATE_BUSY_RX_LISTEN = 0x2AU, /*!< Address Listen Mode and Data Reception
|
||||
process is ongoing */
|
||||
HAL_I2C_STATE_ABORT = 0x60U, /*!< Abort user request ongoing */
|
||||
HAL_I2C_STATE_TIMEOUT = 0xA0U, /*!< Timeout state */
|
||||
HAL_I2C_STATE_ERROR = 0xE0U /*!< Error */
|
||||
|
||||
} HAL_I2C_StateTypeDef;
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup HAL_mode_structure_definition HAL mode structure definition
|
||||
* @brief HAL Mode structure definition
|
||||
* @note HAL I2C Mode value coding follow below described bitmap :\n
|
||||
* b7 (not used)\n
|
||||
* x : Should be set to 0\n
|
||||
* b6\n
|
||||
* 0 : None\n
|
||||
* 1 : Memory (HAL I2C communication is in Memory Mode)\n
|
||||
* b5\n
|
||||
* 0 : None\n
|
||||
* 1 : Slave (HAL I2C communication is in Slave Mode)\n
|
||||
* b4\n
|
||||
* 0 : None\n
|
||||
* 1 : Master (HAL I2C communication is in Master Mode)\n
|
||||
* b3-b2-b1-b0 (not used)\n
|
||||
* xxxx : Should be set to 0000
|
||||
* @{
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
HAL_I2C_MODE_NONE = 0x00U, /*!< No I2C communication on going */
|
||||
HAL_I2C_MODE_MASTER = 0x10U, /*!< I2C communication is in Master Mode */
|
||||
HAL_I2C_MODE_SLAVE = 0x20U, /*!< I2C communication is in Slave Mode */
|
||||
HAL_I2C_MODE_MEM = 0x40U /*!< I2C communication is in Memory Mode */
|
||||
|
||||
} HAL_I2C_ModeTypeDef;
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup I2C_Error_Code_definition I2C Error Code definition
|
||||
* @brief I2C Error Code definition
|
||||
* @{
|
||||
*/
|
||||
#define HAL_I2C_ERROR_NONE (0x00000000U) /*!< No error */
|
||||
#define HAL_I2C_ERROR_BERR (0x00000001U) /*!< BERR error */
|
||||
#define HAL_I2C_ERROR_ARLO (0x00000002U) /*!< ARLO error */
|
||||
#define HAL_I2C_ERROR_AF (0x00000004U) /*!< ACKF error */
|
||||
#define HAL_I2C_ERROR_OVR (0x00000008U) /*!< OVR error */
|
||||
#define HAL_I2C_ERROR_DMA (0x00000010U) /*!< DMA transfer error */
|
||||
#define HAL_I2C_ERROR_TIMEOUT (0x00000020U) /*!< Timeout error */
|
||||
#define HAL_I2C_ERROR_SIZE (0x00000040U) /*!< Size Management error */
|
||||
#define HAL_I2C_ERROR_DMA_PARAM (0x00000080U) /*!< DMA Parameter Error */
|
||||
#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1)
|
||||
#define HAL_I2C_ERROR_INVALID_CALLBACK (0x00000100U) /*!< Invalid Callback error */
|
||||
#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */
|
||||
#define HAL_I2C_ERROR_INVALID_PARAM (0x00000200U) /*!< Invalid Parameters error */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup I2C_handle_Structure_definition I2C handle Structure definition
|
||||
* @brief I2C handle Structure definition
|
||||
* @{
|
||||
*/
|
||||
typedef struct __I2C_HandleTypeDef
|
||||
{
|
||||
I2C_TypeDef *Instance; /*!< I2C registers base address */
|
||||
|
||||
I2C_InitTypeDef Init; /*!< I2C communication parameters */
|
||||
|
||||
uint8_t *pBuffPtr; /*!< Pointer to I2C transfer buffer */
|
||||
|
||||
uint16_t XferSize; /*!< I2C transfer size */
|
||||
|
||||
__IO uint16_t XferCount; /*!< I2C transfer counter */
|
||||
|
||||
__IO uint32_t XferOptions; /*!< I2C sequantial transfer options, this parameter can
|
||||
be a value of @ref I2C_XFEROPTIONS */
|
||||
|
||||
__IO uint32_t PreviousState; /*!< I2C communication Previous state */
|
||||
|
||||
HAL_StatusTypeDef(*XferISR)(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources);
|
||||
/*!< I2C transfer IRQ handler function pointer */
|
||||
|
||||
DMA_HandleTypeDef *hdmatx; /*!< I2C Tx DMA handle parameters */
|
||||
|
||||
DMA_HandleTypeDef *hdmarx; /*!< I2C Rx DMA handle parameters */
|
||||
|
||||
HAL_LockTypeDef Lock; /*!< I2C locking object */
|
||||
|
||||
__IO HAL_I2C_StateTypeDef State; /*!< I2C communication state */
|
||||
|
||||
__IO HAL_I2C_ModeTypeDef Mode; /*!< I2C communication mode */
|
||||
|
||||
__IO uint32_t ErrorCode; /*!< I2C Error code */
|
||||
|
||||
__IO uint32_t AddrEventCount; /*!< I2C Address Event counter */
|
||||
|
||||
__IO uint32_t Devaddress; /*!< I2C Target device address */
|
||||
|
||||
__IO uint32_t Memaddress; /*!< I2C Target memory address */
|
||||
|
||||
#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1)
|
||||
void (* MasterTxCpltCallback)(struct __I2C_HandleTypeDef *hi2c);
|
||||
/*!< I2C Master Tx Transfer completed callback */
|
||||
void (* MasterRxCpltCallback)(struct __I2C_HandleTypeDef *hi2c);
|
||||
/*!< I2C Master Rx Transfer completed callback */
|
||||
void (* SlaveTxCpltCallback)(struct __I2C_HandleTypeDef *hi2c);
|
||||
/*!< I2C Slave Tx Transfer completed callback */
|
||||
void (* SlaveRxCpltCallback)(struct __I2C_HandleTypeDef *hi2c);
|
||||
/*!< I2C Slave Rx Transfer completed callback */
|
||||
void (* ListenCpltCallback)(struct __I2C_HandleTypeDef *hi2c);
|
||||
/*!< I2C Listen Complete callback */
|
||||
void (* MemTxCpltCallback)(struct __I2C_HandleTypeDef *hi2c);
|
||||
/*!< I2C Memory Tx Transfer completed callback */
|
||||
void (* MemRxCpltCallback)(struct __I2C_HandleTypeDef *hi2c);
|
||||
/*!< I2C Memory Rx Transfer completed callback */
|
||||
void (* ErrorCallback)(struct __I2C_HandleTypeDef *hi2c);
|
||||
/*!< I2C Error callback */
|
||||
void (* AbortCpltCallback)(struct __I2C_HandleTypeDef *hi2c);
|
||||
/*!< I2C Abort callback */
|
||||
|
||||
void (* AddrCallback)(struct __I2C_HandleTypeDef *hi2c, uint8_t TransferDirection, uint16_t AddrMatchCode);
|
||||
/*!< I2C Slave Address Match callback */
|
||||
|
||||
void (* MspInitCallback)(struct __I2C_HandleTypeDef *hi2c);
|
||||
/*!< I2C Msp Init callback */
|
||||
void (* MspDeInitCallback)(struct __I2C_HandleTypeDef *hi2c);
|
||||
/*!< I2C Msp DeInit callback */
|
||||
|
||||
#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */
|
||||
} I2C_HandleTypeDef;
|
||||
|
||||
#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1)
|
||||
/**
|
||||
* @brief HAL I2C Callback ID enumeration definition
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
HAL_I2C_MASTER_TX_COMPLETE_CB_ID = 0x00U, /*!< I2C Master Tx Transfer completed callback ID */
|
||||
HAL_I2C_MASTER_RX_COMPLETE_CB_ID = 0x01U, /*!< I2C Master Rx Transfer completed callback ID */
|
||||
HAL_I2C_SLAVE_TX_COMPLETE_CB_ID = 0x02U, /*!< I2C Slave Tx Transfer completed callback ID */
|
||||
HAL_I2C_SLAVE_RX_COMPLETE_CB_ID = 0x03U, /*!< I2C Slave Rx Transfer completed callback ID */
|
||||
HAL_I2C_LISTEN_COMPLETE_CB_ID = 0x04U, /*!< I2C Listen Complete callback ID */
|
||||
HAL_I2C_MEM_TX_COMPLETE_CB_ID = 0x05U, /*!< I2C Memory Tx Transfer callback ID */
|
||||
HAL_I2C_MEM_RX_COMPLETE_CB_ID = 0x06U, /*!< I2C Memory Rx Transfer completed callback ID */
|
||||
HAL_I2C_ERROR_CB_ID = 0x07U, /*!< I2C Error callback ID */
|
||||
HAL_I2C_ABORT_CB_ID = 0x08U, /*!< I2C Abort callback ID */
|
||||
|
||||
HAL_I2C_MSPINIT_CB_ID = 0x09U, /*!< I2C Msp Init callback ID */
|
||||
HAL_I2C_MSPDEINIT_CB_ID = 0x0AU /*!< I2C Msp DeInit callback ID */
|
||||
|
||||
} HAL_I2C_CallbackIDTypeDef;
|
||||
|
||||
/**
|
||||
* @brief HAL I2C Callback pointer definition
|
||||
*/
|
||||
typedef void (*pI2C_CallbackTypeDef)(I2C_HandleTypeDef *hi2c);
|
||||
/*!< pointer to an I2C callback function */
|
||||
typedef void (*pI2C_AddrCallbackTypeDef)(I2C_HandleTypeDef *hi2c, uint8_t TransferDirection,
|
||||
uint16_t AddrMatchCode);
|
||||
/*!< pointer to an I2C Address Match callback function */
|
||||
|
||||
#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
|
||||
/** @defgroup I2C_Exported_Constants I2C Exported Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup I2C_XFEROPTIONS I2C Sequential Transfer Options
|
||||
* @{
|
||||
*/
|
||||
#define I2C_FIRST_FRAME ((uint32_t)I2C_SOFTEND_MODE)
|
||||
#define I2C_FIRST_AND_NEXT_FRAME ((uint32_t)(I2C_RELOAD_MODE | I2C_SOFTEND_MODE))
|
||||
#define I2C_NEXT_FRAME ((uint32_t)(I2C_RELOAD_MODE | I2C_SOFTEND_MODE))
|
||||
#define I2C_FIRST_AND_LAST_FRAME ((uint32_t)I2C_AUTOEND_MODE)
|
||||
#define I2C_LAST_FRAME ((uint32_t)I2C_AUTOEND_MODE)
|
||||
#define I2C_LAST_FRAME_NO_STOP ((uint32_t)I2C_SOFTEND_MODE)
|
||||
|
||||
/* List of XferOptions in usage of :
|
||||
* 1- Restart condition in all use cases (direction change or not)
|
||||
*/
|
||||
#define I2C_OTHER_FRAME (0x000000AAU)
|
||||
#define I2C_OTHER_AND_LAST_FRAME (0x0000AA00U)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup I2C_ADDRESSING_MODE I2C Addressing Mode
|
||||
* @{
|
||||
*/
|
||||
#define I2C_ADDRESSINGMODE_7BIT (0x00000001U)
|
||||
#define I2C_ADDRESSINGMODE_10BIT (0x00000002U)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup I2C_DUAL_ADDRESSING_MODE I2C Dual Addressing Mode
|
||||
* @{
|
||||
*/
|
||||
#define I2C_DUALADDRESS_DISABLE (0x00000000U)
|
||||
#define I2C_DUALADDRESS_ENABLE I2C_OAR2_OA2EN
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup I2C_OWN_ADDRESS2_MASKS I2C Own Address2 Masks
|
||||
* @{
|
||||
*/
|
||||
#define I2C_OA2_NOMASK ((uint8_t)0x00U)
|
||||
#define I2C_OA2_MASK01 ((uint8_t)0x01U)
|
||||
#define I2C_OA2_MASK02 ((uint8_t)0x02U)
|
||||
#define I2C_OA2_MASK03 ((uint8_t)0x03U)
|
||||
#define I2C_OA2_MASK04 ((uint8_t)0x04U)
|
||||
#define I2C_OA2_MASK05 ((uint8_t)0x05U)
|
||||
#define I2C_OA2_MASK06 ((uint8_t)0x06U)
|
||||
#define I2C_OA2_MASK07 ((uint8_t)0x07U)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup I2C_GENERAL_CALL_ADDRESSING_MODE I2C General Call Addressing Mode
|
||||
* @{
|
||||
*/
|
||||
#define I2C_GENERALCALL_DISABLE (0x00000000U)
|
||||
#define I2C_GENERALCALL_ENABLE I2C_CR1_GCEN
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup I2C_NOSTRETCH_MODE I2C No-Stretch Mode
|
||||
* @{
|
||||
*/
|
||||
#define I2C_NOSTRETCH_DISABLE (0x00000000U)
|
||||
#define I2C_NOSTRETCH_ENABLE I2C_CR1_NOSTRETCH
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup I2C_MEMORY_ADDRESS_SIZE I2C Memory Address Size
|
||||
* @{
|
||||
*/
|
||||
#define I2C_MEMADD_SIZE_8BIT (0x00000001U)
|
||||
#define I2C_MEMADD_SIZE_16BIT (0x00000002U)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup I2C_XFERDIRECTION I2C Transfer Direction Master Point of View
|
||||
* @{
|
||||
*/
|
||||
#define I2C_DIRECTION_TRANSMIT (0x00000000U)
|
||||
#define I2C_DIRECTION_RECEIVE (0x00000001U)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup I2C_RELOAD_END_MODE I2C Reload End Mode
|
||||
* @{
|
||||
*/
|
||||
#define I2C_RELOAD_MODE I2C_CR2_RELOAD
|
||||
#define I2C_AUTOEND_MODE I2C_CR2_AUTOEND
|
||||
#define I2C_SOFTEND_MODE (0x00000000U)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup I2C_START_STOP_MODE I2C Start or Stop Mode
|
||||
* @{
|
||||
*/
|
||||
#define I2C_NO_STARTSTOP (0x00000000U)
|
||||
#define I2C_GENERATE_STOP (uint32_t)(0x80000000U | I2C_CR2_STOP)
|
||||
#define I2C_GENERATE_START_READ (uint32_t)(0x80000000U | I2C_CR2_START | I2C_CR2_RD_WRN)
|
||||
#define I2C_GENERATE_START_WRITE (uint32_t)(0x80000000U | I2C_CR2_START)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup I2C_Interrupt_configuration_definition I2C Interrupt configuration definition
|
||||
* @brief I2C Interrupt definition
|
||||
* Elements values convention: 0xXXXXXXXX
|
||||
* - XXXXXXXX : Interrupt control mask
|
||||
* @{
|
||||
*/
|
||||
#define I2C_IT_ERRI I2C_CR1_ERRIE
|
||||
#define I2C_IT_TCI I2C_CR1_TCIE
|
||||
#define I2C_IT_STOPI I2C_CR1_STOPIE
|
||||
#define I2C_IT_NACKI I2C_CR1_NACKIE
|
||||
#define I2C_IT_ADDRI I2C_CR1_ADDRIE
|
||||
#define I2C_IT_RXI I2C_CR1_RXIE
|
||||
#define I2C_IT_TXI I2C_CR1_TXIE
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup I2C_Flag_definition I2C Flag definition
|
||||
* @{
|
||||
*/
|
||||
#define I2C_FLAG_TXE I2C_ISR_TXE
|
||||
#define I2C_FLAG_TXIS I2C_ISR_TXIS
|
||||
#define I2C_FLAG_RXNE I2C_ISR_RXNE
|
||||
#define I2C_FLAG_ADDR I2C_ISR_ADDR
|
||||
#define I2C_FLAG_AF I2C_ISR_NACKF
|
||||
#define I2C_FLAG_STOPF I2C_ISR_STOPF
|
||||
#define I2C_FLAG_TC I2C_ISR_TC
|
||||
#define I2C_FLAG_TCR I2C_ISR_TCR
|
||||
#define I2C_FLAG_BERR I2C_ISR_BERR
|
||||
#define I2C_FLAG_ARLO I2C_ISR_ARLO
|
||||
#define I2C_FLAG_OVR I2C_ISR_OVR
|
||||
#define I2C_FLAG_PECERR I2C_ISR_PECERR
|
||||
#define I2C_FLAG_TIMEOUT I2C_ISR_TIMEOUT
|
||||
#define I2C_FLAG_ALERT I2C_ISR_ALERT
|
||||
#define I2C_FLAG_BUSY I2C_ISR_BUSY
|
||||
#define I2C_FLAG_DIR I2C_ISR_DIR
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported macros -----------------------------------------------------------*/
|
||||
|
||||
/** @defgroup I2C_Exported_Macros I2C Exported Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @brief Reset I2C handle state.
|
||||
* @param __HANDLE__ specifies the I2C Handle.
|
||||
* @retval None
|
||||
*/
|
||||
#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1)
|
||||
#define __HAL_I2C_RESET_HANDLE_STATE(__HANDLE__) do{ \
|
||||
(__HANDLE__)->State = HAL_I2C_STATE_RESET; \
|
||||
(__HANDLE__)->MspInitCallback = NULL; \
|
||||
(__HANDLE__)->MspDeInitCallback = NULL; \
|
||||
} while(0)
|
||||
#else
|
||||
#define __HAL_I2C_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_I2C_STATE_RESET)
|
||||
#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */
|
||||
|
||||
/** @brief Enable the specified I2C interrupt.
|
||||
* @param __HANDLE__ specifies the I2C Handle.
|
||||
* @param __INTERRUPT__ specifies the interrupt source to enable.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg @ref I2C_IT_ERRI Errors interrupt enable
|
||||
* @arg @ref I2C_IT_TCI Transfer complete interrupt enable
|
||||
* @arg @ref I2C_IT_STOPI STOP detection interrupt enable
|
||||
* @arg @ref I2C_IT_NACKI NACK received interrupt enable
|
||||
* @arg @ref I2C_IT_ADDRI Address match interrupt enable
|
||||
* @arg @ref I2C_IT_RXI RX interrupt enable
|
||||
* @arg @ref I2C_IT_TXI TX interrupt enable
|
||||
*
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_I2C_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR1 |= (__INTERRUPT__))
|
||||
|
||||
/** @brief Disable the specified I2C interrupt.
|
||||
* @param __HANDLE__ specifies the I2C Handle.
|
||||
* @param __INTERRUPT__ specifies the interrupt source to disable.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg @ref I2C_IT_ERRI Errors interrupt enable
|
||||
* @arg @ref I2C_IT_TCI Transfer complete interrupt enable
|
||||
* @arg @ref I2C_IT_STOPI STOP detection interrupt enable
|
||||
* @arg @ref I2C_IT_NACKI NACK received interrupt enable
|
||||
* @arg @ref I2C_IT_ADDRI Address match interrupt enable
|
||||
* @arg @ref I2C_IT_RXI RX interrupt enable
|
||||
* @arg @ref I2C_IT_TXI TX interrupt enable
|
||||
*
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_I2C_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR1 &= (~(__INTERRUPT__)))
|
||||
|
||||
/** @brief Check whether the specified I2C interrupt source is enabled or not.
|
||||
* @param __HANDLE__ specifies the I2C Handle.
|
||||
* @param __INTERRUPT__ specifies the I2C interrupt source to check.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg @ref I2C_IT_ERRI Errors interrupt enable
|
||||
* @arg @ref I2C_IT_TCI Transfer complete interrupt enable
|
||||
* @arg @ref I2C_IT_STOPI STOP detection interrupt enable
|
||||
* @arg @ref I2C_IT_NACKI NACK received interrupt enable
|
||||
* @arg @ref I2C_IT_ADDRI Address match interrupt enable
|
||||
* @arg @ref I2C_IT_RXI RX interrupt enable
|
||||
* @arg @ref I2C_IT_TXI TX interrupt enable
|
||||
*
|
||||
* @retval The new state of __INTERRUPT__ (SET or RESET).
|
||||
*/
|
||||
#define __HAL_I2C_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR1 & \
|
||||
(__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
|
||||
|
||||
/** @brief Check whether the specified I2C flag is set or not.
|
||||
* @param __HANDLE__ specifies the I2C Handle.
|
||||
* @param __FLAG__ specifies the flag to check.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg @ref I2C_FLAG_TXE Transmit data register empty
|
||||
* @arg @ref I2C_FLAG_TXIS Transmit interrupt status
|
||||
* @arg @ref I2C_FLAG_RXNE Receive data register not empty
|
||||
* @arg @ref I2C_FLAG_ADDR Address matched (slave mode)
|
||||
* @arg @ref I2C_FLAG_AF Acknowledge failure received flag
|
||||
* @arg @ref I2C_FLAG_STOPF STOP detection flag
|
||||
* @arg @ref I2C_FLAG_TC Transfer complete (master mode)
|
||||
* @arg @ref I2C_FLAG_TCR Transfer complete reload
|
||||
* @arg @ref I2C_FLAG_BERR Bus error
|
||||
* @arg @ref I2C_FLAG_ARLO Arbitration lost
|
||||
* @arg @ref I2C_FLAG_OVR Overrun/Underrun
|
||||
* @arg @ref I2C_FLAG_PECERR PEC error in reception
|
||||
* @arg @ref I2C_FLAG_TIMEOUT Timeout or Tlow detection flag
|
||||
* @arg @ref I2C_FLAG_ALERT SMBus alert
|
||||
* @arg @ref I2C_FLAG_BUSY Bus busy
|
||||
* @arg @ref I2C_FLAG_DIR Transfer direction (slave mode)
|
||||
*
|
||||
* @retval The new state of __FLAG__ (SET or RESET).
|
||||
*/
|
||||
#define I2C_FLAG_MASK (0x0001FFFFU)
|
||||
#define __HAL_I2C_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & \
|
||||
(__FLAG__)) == (__FLAG__)) ? SET : RESET)
|
||||
|
||||
/** @brief Clear the I2C pending flags which are cleared by writing 1 in a specific bit.
|
||||
* @param __HANDLE__ specifies the I2C Handle.
|
||||
* @param __FLAG__ specifies the flag to clear.
|
||||
* This parameter can be any combination of the following values:
|
||||
* @arg @ref I2C_FLAG_TXE Transmit data register empty
|
||||
* @arg @ref I2C_FLAG_ADDR Address matched (slave mode)
|
||||
* @arg @ref I2C_FLAG_AF Acknowledge failure received flag
|
||||
* @arg @ref I2C_FLAG_STOPF STOP detection flag
|
||||
* @arg @ref I2C_FLAG_BERR Bus error
|
||||
* @arg @ref I2C_FLAG_ARLO Arbitration lost
|
||||
* @arg @ref I2C_FLAG_OVR Overrun/Underrun
|
||||
* @arg @ref I2C_FLAG_PECERR PEC error in reception
|
||||
* @arg @ref I2C_FLAG_TIMEOUT Timeout or Tlow detection flag
|
||||
* @arg @ref I2C_FLAG_ALERT SMBus alert
|
||||
*
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_I2C_CLEAR_FLAG(__HANDLE__, __FLAG__) (((__FLAG__) == I2C_FLAG_TXE) ? \
|
||||
((__HANDLE__)->Instance->ISR |= (__FLAG__)) : \
|
||||
((__HANDLE__)->Instance->ICR = (__FLAG__)))
|
||||
|
||||
/** @brief Enable the specified I2C peripheral.
|
||||
* @param __HANDLE__ specifies the I2C Handle.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_I2C_ENABLE(__HANDLE__) (SET_BIT((__HANDLE__)->Instance->CR1, I2C_CR1_PE))
|
||||
|
||||
/** @brief Disable the specified I2C peripheral.
|
||||
* @param __HANDLE__ specifies the I2C Handle.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_I2C_DISABLE(__HANDLE__) (CLEAR_BIT((__HANDLE__)->Instance->CR1, I2C_CR1_PE))
|
||||
|
||||
/** @brief Generate a Non-Acknowledge I2C peripheral in Slave mode.
|
||||
* @param __HANDLE__ specifies the I2C Handle.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_I2C_GENERATE_NACK(__HANDLE__) (SET_BIT((__HANDLE__)->Instance->CR2, I2C_CR2_NACK))
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Include I2C HAL Extended module */
|
||||
#include "stm32f7xx_hal_i2c_ex.h"
|
||||
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @addtogroup I2C_Exported_Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup I2C_Exported_Functions_Group1 Initialization and de-initialization functions
|
||||
* @{
|
||||
*/
|
||||
/* Initialization and de-initialization functions******************************/
|
||||
HAL_StatusTypeDef HAL_I2C_Init(I2C_HandleTypeDef *hi2c);
|
||||
HAL_StatusTypeDef HAL_I2C_DeInit(I2C_HandleTypeDef *hi2c);
|
||||
void HAL_I2C_MspInit(I2C_HandleTypeDef *hi2c);
|
||||
void HAL_I2C_MspDeInit(I2C_HandleTypeDef *hi2c);
|
||||
|
||||
/* Callbacks Register/UnRegister functions ***********************************/
|
||||
#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1)
|
||||
HAL_StatusTypeDef HAL_I2C_RegisterCallback(I2C_HandleTypeDef *hi2c, HAL_I2C_CallbackIDTypeDef CallbackID,
|
||||
pI2C_CallbackTypeDef pCallback);
|
||||
HAL_StatusTypeDef HAL_I2C_UnRegisterCallback(I2C_HandleTypeDef *hi2c, HAL_I2C_CallbackIDTypeDef CallbackID);
|
||||
|
||||
HAL_StatusTypeDef HAL_I2C_RegisterAddrCallback(I2C_HandleTypeDef *hi2c, pI2C_AddrCallbackTypeDef pCallback);
|
||||
HAL_StatusTypeDef HAL_I2C_UnRegisterAddrCallback(I2C_HandleTypeDef *hi2c);
|
||||
#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup I2C_Exported_Functions_Group2 Input and Output operation functions
|
||||
* @{
|
||||
*/
|
||||
/* IO operation functions ****************************************************/
|
||||
/******* Blocking mode: Polling */
|
||||
HAL_StatusTypeDef HAL_I2C_Master_Transmit(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData,
|
||||
uint16_t Size, uint32_t Timeout);
|
||||
HAL_StatusTypeDef HAL_I2C_Master_Receive(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData,
|
||||
uint16_t Size, uint32_t Timeout);
|
||||
HAL_StatusTypeDef HAL_I2C_Slave_Transmit(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size,
|
||||
uint32_t Timeout);
|
||||
HAL_StatusTypeDef HAL_I2C_Slave_Receive(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size,
|
||||
uint32_t Timeout);
|
||||
HAL_StatusTypeDef HAL_I2C_Mem_Write(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress,
|
||||
uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout);
|
||||
HAL_StatusTypeDef HAL_I2C_Mem_Read(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress,
|
||||
uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout);
|
||||
HAL_StatusTypeDef HAL_I2C_IsDeviceReady(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint32_t Trials,
|
||||
uint32_t Timeout);
|
||||
|
||||
/******* Non-Blocking mode: Interrupt */
|
||||
HAL_StatusTypeDef HAL_I2C_Master_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData,
|
||||
uint16_t Size);
|
||||
HAL_StatusTypeDef HAL_I2C_Master_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData,
|
||||
uint16_t Size);
|
||||
HAL_StatusTypeDef HAL_I2C_Slave_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size);
|
||||
HAL_StatusTypeDef HAL_I2C_Slave_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size);
|
||||
HAL_StatusTypeDef HAL_I2C_Mem_Write_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress,
|
||||
uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
|
||||
HAL_StatusTypeDef HAL_I2C_Mem_Read_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress,
|
||||
uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
|
||||
|
||||
HAL_StatusTypeDef HAL_I2C_Master_Seq_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData,
|
||||
uint16_t Size, uint32_t XferOptions);
|
||||
HAL_StatusTypeDef HAL_I2C_Master_Seq_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData,
|
||||
uint16_t Size, uint32_t XferOptions);
|
||||
HAL_StatusTypeDef HAL_I2C_Slave_Seq_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size,
|
||||
uint32_t XferOptions);
|
||||
HAL_StatusTypeDef HAL_I2C_Slave_Seq_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size,
|
||||
uint32_t XferOptions);
|
||||
HAL_StatusTypeDef HAL_I2C_EnableListen_IT(I2C_HandleTypeDef *hi2c);
|
||||
HAL_StatusTypeDef HAL_I2C_DisableListen_IT(I2C_HandleTypeDef *hi2c);
|
||||
HAL_StatusTypeDef HAL_I2C_Master_Abort_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress);
|
||||
|
||||
/******* Non-Blocking mode: DMA */
|
||||
HAL_StatusTypeDef HAL_I2C_Master_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData,
|
||||
uint16_t Size);
|
||||
HAL_StatusTypeDef HAL_I2C_Master_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData,
|
||||
uint16_t Size);
|
||||
HAL_StatusTypeDef HAL_I2C_Slave_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size);
|
||||
HAL_StatusTypeDef HAL_I2C_Slave_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size);
|
||||
HAL_StatusTypeDef HAL_I2C_Mem_Write_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress,
|
||||
uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
|
||||
HAL_StatusTypeDef HAL_I2C_Mem_Read_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress,
|
||||
uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
|
||||
|
||||
HAL_StatusTypeDef HAL_I2C_Master_Seq_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData,
|
||||
uint16_t Size, uint32_t XferOptions);
|
||||
HAL_StatusTypeDef HAL_I2C_Master_Seq_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData,
|
||||
uint16_t Size, uint32_t XferOptions);
|
||||
HAL_StatusTypeDef HAL_I2C_Slave_Seq_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size,
|
||||
uint32_t XferOptions);
|
||||
HAL_StatusTypeDef HAL_I2C_Slave_Seq_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size,
|
||||
uint32_t XferOptions);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup I2C_IRQ_Handler_and_Callbacks IRQ Handler and Callbacks
|
||||
* @{
|
||||
*/
|
||||
/******* I2C IRQHandler and Callbacks used in non blocking modes (Interrupt and DMA) */
|
||||
void HAL_I2C_EV_IRQHandler(I2C_HandleTypeDef *hi2c);
|
||||
void HAL_I2C_ER_IRQHandler(I2C_HandleTypeDef *hi2c);
|
||||
void HAL_I2C_MasterTxCpltCallback(I2C_HandleTypeDef *hi2c);
|
||||
void HAL_I2C_MasterRxCpltCallback(I2C_HandleTypeDef *hi2c);
|
||||
void HAL_I2C_SlaveTxCpltCallback(I2C_HandleTypeDef *hi2c);
|
||||
void HAL_I2C_SlaveRxCpltCallback(I2C_HandleTypeDef *hi2c);
|
||||
void HAL_I2C_AddrCallback(I2C_HandleTypeDef *hi2c, uint8_t TransferDirection, uint16_t AddrMatchCode);
|
||||
void HAL_I2C_ListenCpltCallback(I2C_HandleTypeDef *hi2c);
|
||||
void HAL_I2C_MemTxCpltCallback(I2C_HandleTypeDef *hi2c);
|
||||
void HAL_I2C_MemRxCpltCallback(I2C_HandleTypeDef *hi2c);
|
||||
void HAL_I2C_ErrorCallback(I2C_HandleTypeDef *hi2c);
|
||||
void HAL_I2C_AbortCpltCallback(I2C_HandleTypeDef *hi2c);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup I2C_Exported_Functions_Group3 Peripheral State, Mode and Error functions
|
||||
* @{
|
||||
*/
|
||||
/* Peripheral State, Mode and Error functions *********************************/
|
||||
HAL_I2C_StateTypeDef HAL_I2C_GetState(I2C_HandleTypeDef *hi2c);
|
||||
HAL_I2C_ModeTypeDef HAL_I2C_GetMode(I2C_HandleTypeDef *hi2c);
|
||||
uint32_t HAL_I2C_GetError(I2C_HandleTypeDef *hi2c);
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private constants ---------------------------------------------------------*/
|
||||
/** @defgroup I2C_Private_Constants I2C Private Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private macros ------------------------------------------------------------*/
|
||||
/** @defgroup I2C_Private_Macro I2C Private Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
#define IS_I2C_ADDRESSING_MODE(MODE) (((MODE) == I2C_ADDRESSINGMODE_7BIT) || \
|
||||
((MODE) == I2C_ADDRESSINGMODE_10BIT))
|
||||
|
||||
#define IS_I2C_DUAL_ADDRESS(ADDRESS) (((ADDRESS) == I2C_DUALADDRESS_DISABLE) || \
|
||||
((ADDRESS) == I2C_DUALADDRESS_ENABLE))
|
||||
|
||||
#define IS_I2C_OWN_ADDRESS2_MASK(MASK) (((MASK) == I2C_OA2_NOMASK) || \
|
||||
((MASK) == I2C_OA2_MASK01) || \
|
||||
((MASK) == I2C_OA2_MASK02) || \
|
||||
((MASK) == I2C_OA2_MASK03) || \
|
||||
((MASK) == I2C_OA2_MASK04) || \
|
||||
((MASK) == I2C_OA2_MASK05) || \
|
||||
((MASK) == I2C_OA2_MASK06) || \
|
||||
((MASK) == I2C_OA2_MASK07))
|
||||
|
||||
#define IS_I2C_GENERAL_CALL(CALL) (((CALL) == I2C_GENERALCALL_DISABLE) || \
|
||||
((CALL) == I2C_GENERALCALL_ENABLE))
|
||||
|
||||
#define IS_I2C_NO_STRETCH(STRETCH) (((STRETCH) == I2C_NOSTRETCH_DISABLE) || \
|
||||
((STRETCH) == I2C_NOSTRETCH_ENABLE))
|
||||
|
||||
#define IS_I2C_MEMADD_SIZE(SIZE) (((SIZE) == I2C_MEMADD_SIZE_8BIT) || \
|
||||
((SIZE) == I2C_MEMADD_SIZE_16BIT))
|
||||
|
||||
#define IS_TRANSFER_MODE(MODE) (((MODE) == I2C_RELOAD_MODE) || \
|
||||
((MODE) == I2C_AUTOEND_MODE) || \
|
||||
((MODE) == I2C_SOFTEND_MODE))
|
||||
|
||||
#define IS_TRANSFER_REQUEST(REQUEST) (((REQUEST) == I2C_GENERATE_STOP) || \
|
||||
((REQUEST) == I2C_GENERATE_START_READ) || \
|
||||
((REQUEST) == I2C_GENERATE_START_WRITE) || \
|
||||
((REQUEST) == I2C_NO_STARTSTOP))
|
||||
|
||||
#define IS_I2C_TRANSFER_OPTIONS_REQUEST(REQUEST) (((REQUEST) == I2C_FIRST_FRAME) || \
|
||||
((REQUEST) == I2C_FIRST_AND_NEXT_FRAME) || \
|
||||
((REQUEST) == I2C_NEXT_FRAME) || \
|
||||
((REQUEST) == I2C_FIRST_AND_LAST_FRAME) || \
|
||||
((REQUEST) == I2C_LAST_FRAME) || \
|
||||
((REQUEST) == I2C_LAST_FRAME_NO_STOP) || \
|
||||
IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(REQUEST))
|
||||
|
||||
#define IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(REQUEST) (((REQUEST) == I2C_OTHER_FRAME) || \
|
||||
((REQUEST) == I2C_OTHER_AND_LAST_FRAME))
|
||||
|
||||
#define I2C_RESET_CR2(__HANDLE__) ((__HANDLE__)->Instance->CR2 &= \
|
||||
(uint32_t)~((uint32_t)(I2C_CR2_SADD | I2C_CR2_HEAD10R | \
|
||||
I2C_CR2_NBYTES | I2C_CR2_RELOAD | \
|
||||
I2C_CR2_RD_WRN)))
|
||||
|
||||
#define I2C_GET_ADDR_MATCH(__HANDLE__) ((uint16_t)(((__HANDLE__)->Instance->ISR & I2C_ISR_ADDCODE) \
|
||||
>> 16U))
|
||||
#define I2C_GET_DIR(__HANDLE__) ((uint8_t)(((__HANDLE__)->Instance->ISR & I2C_ISR_DIR) \
|
||||
>> 16U))
|
||||
#define I2C_GET_STOP_MODE(__HANDLE__) ((__HANDLE__)->Instance->CR2 & I2C_CR2_AUTOEND)
|
||||
#define I2C_GET_OWN_ADDRESS1(__HANDLE__) ((uint16_t)((__HANDLE__)->Instance->OAR1 & I2C_OAR1_OA1))
|
||||
#define I2C_GET_OWN_ADDRESS2(__HANDLE__) ((uint16_t)((__HANDLE__)->Instance->OAR2 & I2C_OAR2_OA2))
|
||||
|
||||
#define IS_I2C_OWN_ADDRESS1(ADDRESS1) ((ADDRESS1) <= 0x000003FFU)
|
||||
#define IS_I2C_OWN_ADDRESS2(ADDRESS2) ((ADDRESS2) <= (uint16_t)0x00FFU)
|
||||
|
||||
#define I2C_MEM_ADD_MSB(__ADDRESS__) ((uint8_t)((uint16_t)(((uint16_t)((__ADDRESS__) & \
|
||||
(uint16_t)(0xFF00U))) >> 8U)))
|
||||
#define I2C_MEM_ADD_LSB(__ADDRESS__) ((uint8_t)((uint16_t)((__ADDRESS__) & (uint16_t)(0x00FFU))))
|
||||
|
||||
#define I2C_GENERATE_START(__ADDMODE__,__ADDRESS__) (((__ADDMODE__) == I2C_ADDRESSINGMODE_7BIT) ? \
|
||||
(uint32_t)((((uint32_t)(__ADDRESS__) & (I2C_CR2_SADD)) | \
|
||||
(I2C_CR2_START) | (I2C_CR2_AUTOEND)) & \
|
||||
(~I2C_CR2_RD_WRN)) : \
|
||||
(uint32_t)((((uint32_t)(__ADDRESS__) & (I2C_CR2_SADD)) | \
|
||||
(I2C_CR2_ADD10) | (I2C_CR2_START)) & \
|
||||
(~I2C_CR2_RD_WRN)))
|
||||
|
||||
#define I2C_CHECK_FLAG(__ISR__, __FLAG__) ((((__ISR__) & ((__FLAG__) & I2C_FLAG_MASK)) == \
|
||||
((__FLAG__) & I2C_FLAG_MASK)) ? SET : RESET)
|
||||
#define I2C_CHECK_IT_SOURCE(__CR1__, __IT__) ((((__CR1__) & (__IT__)) == (__IT__)) ? SET : RESET)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private Functions ---------------------------------------------------------*/
|
||||
/** @defgroup I2C_Private_Functions I2C Private Functions
|
||||
* @{
|
||||
*/
|
||||
/* Private functions are defined in stm32f7xx_hal_i2c.c file */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
|
||||
#endif /* STM32F7xx_HAL_I2C_H */
|
||||
212
project/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_i2c_ex.h
Normal file
212
project/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_i2c_ex.h
Normal file
@@ -0,0 +1,212 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f7xx_hal_i2c_ex.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of I2C HAL Extended module.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef STM32F7xx_HAL_I2C_EX_H
|
||||
#define STM32F7xx_HAL_I2C_EX_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f7xx_hal_def.h"
|
||||
|
||||
/** @addtogroup STM32F7xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup I2CEx
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/** @defgroup I2CEx_Exported_Constants I2C Extended Exported Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup I2CEx_Analog_Filter I2C Extended Analog Filter
|
||||
* @{
|
||||
*/
|
||||
#define I2C_ANALOGFILTER_ENABLE 0x00000000U
|
||||
#define I2C_ANALOGFILTER_DISABLE I2C_CR1_ANFOFF
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup I2CEx_FastModePlus I2C Extended Fast Mode Plus
|
||||
* @{
|
||||
*/
|
||||
#define I2C_FMP_NOT_SUPPORTED 0xAAAA0000U /*!< Fast Mode Plus not supported */
|
||||
#if defined(SYSCFG_PMC_I2C_PB6_FMP)
|
||||
#define I2C_FASTMODEPLUS_PB6 SYSCFG_PMC_I2C_PB6_FMP /*!< Enable Fast Mode Plus on PB6 */
|
||||
#define I2C_FASTMODEPLUS_PB7 SYSCFG_PMC_I2C_PB7_FMP /*!< Enable Fast Mode Plus on PB7 */
|
||||
#else
|
||||
#define I2C_FASTMODEPLUS_PB6 (uint32_t)(0x00000004U | I2C_FMP_NOT_SUPPORTED) /*!< Fast Mode Plus PB6 not supported */
|
||||
#define I2C_FASTMODEPLUS_PB7 (uint32_t)(0x00000008U | I2C_FMP_NOT_SUPPORTED) /*!< Fast Mode Plus PB7 not supported */
|
||||
#endif /* SYSCFG_PMC_I2C_PB6_FMP */
|
||||
#if defined(SYSCFG_PMC_I2C_PB8_FMP)
|
||||
#define I2C_FASTMODEPLUS_PB8 SYSCFG_PMC_I2C_PB8_FMP /*!< Enable Fast Mode Plus on PB8 */
|
||||
#define I2C_FASTMODEPLUS_PB9 SYSCFG_PMC_I2C_PB9_FMP /*!< Enable Fast Mode Plus on PB9 */
|
||||
#else
|
||||
#define I2C_FASTMODEPLUS_PB8 (uint32_t)(0x00000010U | I2C_FMP_NOT_SUPPORTED) /*!< Fast Mode Plus PB8 not supported */
|
||||
#define I2C_FASTMODEPLUS_PB9 (uint32_t)(0x00000012U | I2C_FMP_NOT_SUPPORTED) /*!< Fast Mode Plus PB9 not supported */
|
||||
#endif /* SYSCFG_PMC_I2C_PB8_FMP */
|
||||
#if defined(SYSCFG_PMC_I2C1_FMP)
|
||||
#define I2C_FASTMODEPLUS_I2C1 SYSCFG_PMC_I2C1_FMP /*!< Enable Fast Mode Plus on I2C1 pins */
|
||||
#else
|
||||
#define I2C_FASTMODEPLUS_I2C1 (uint32_t)(0x00000100U | I2C_FMP_NOT_SUPPORTED) /*!< Fast Mode Plus I2C1 not supported */
|
||||
#endif /* SYSCFG_PMC_I2C1_FMP */
|
||||
#if defined(SYSCFG_PMC_I2C2_FMP)
|
||||
#define I2C_FASTMODEPLUS_I2C2 SYSCFG_PMC_I2C2_FMP /*!< Enable Fast Mode Plus on I2C2 pins */
|
||||
#else
|
||||
#define I2C_FASTMODEPLUS_I2C2 (uint32_t)(0x00000200U | I2C_FMP_NOT_SUPPORTED) /*!< Fast Mode Plus I2C2 not supported */
|
||||
#endif /* SYSCFG_PMC_I2C2_FMP */
|
||||
#if defined(SYSCFG_PMC_I2C3_FMP)
|
||||
#define I2C_FASTMODEPLUS_I2C3 SYSCFG_PMC_I2C3_FMP /*!< Enable Fast Mode Plus on I2C3 pins */
|
||||
#else
|
||||
#define I2C_FASTMODEPLUS_I2C3 (uint32_t)(0x00000400U | I2C_FMP_NOT_SUPPORTED) /*!< Fast Mode Plus I2C3 not supported */
|
||||
#endif /* SYSCFG_PMC_I2C3_FMP */
|
||||
#if defined(SYSCFG_PMC_I2C4_FMP)
|
||||
#define I2C_FASTMODEPLUS_I2C4 SYSCFG_PMC_I2C4_FMP /*!< Enable Fast Mode Plus on I2C4 pins */
|
||||
#else
|
||||
#define I2C_FASTMODEPLUS_I2C4 (uint32_t)(0x00000800U | I2C_FMP_NOT_SUPPORTED) /*!< Fast Mode Plus I2C4 not supported */
|
||||
#endif /* SYSCFG_PMC_I2C4_FMP */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/** @defgroup I2CEx_Exported_Macros I2C Extended Exported Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @addtogroup I2CEx_Exported_Functions I2C Extended Exported Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup I2CEx_Exported_Functions_Group1 Filter Mode Functions
|
||||
* @{
|
||||
*/
|
||||
/* Peripheral Control functions ************************************************/
|
||||
HAL_StatusTypeDef HAL_I2CEx_ConfigAnalogFilter(I2C_HandleTypeDef *hi2c, uint32_t AnalogFilter);
|
||||
HAL_StatusTypeDef HAL_I2CEx_ConfigDigitalFilter(I2C_HandleTypeDef *hi2c, uint32_t DigitalFilter);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
#if (defined(SYSCFG_PMC_I2C_PB6_FMP) || defined(SYSCFG_PMC_I2C_PB7_FMP)) || (defined(SYSCFG_PMC_I2C_PB8_FMP) || defined(SYSCFG_PMC_I2C_PB9_FMP)) || (defined(SYSCFG_PMC_I2C1_FMP)) || (defined(SYSCFG_PMC_I2C2_FMP)) || defined(SYSCFG_PMC_I2C3_FMP) || defined(SYSCFG_PMC_I2C4_FMP)
|
||||
|
||||
/** @addtogroup I2CEx_Exported_Functions_Group3 Fast Mode Plus Functions
|
||||
* @{
|
||||
*/
|
||||
void HAL_I2CEx_EnableFastModePlus(uint32_t ConfigFastModePlus);
|
||||
void HAL_I2CEx_DisableFastModePlus(uint32_t ConfigFastModePlus);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
#endif /* Fast Mode Plus Availability */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private constants ---------------------------------------------------------*/
|
||||
/** @defgroup I2CEx_Private_Constants I2C Extended Private Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private macros ------------------------------------------------------------*/
|
||||
/** @defgroup I2CEx_Private_Macro I2C Extended Private Macros
|
||||
* @{
|
||||
*/
|
||||
#define IS_I2C_ANALOG_FILTER(FILTER) (((FILTER) == I2C_ANALOGFILTER_ENABLE) || \
|
||||
((FILTER) == I2C_ANALOGFILTER_DISABLE))
|
||||
|
||||
#define IS_I2C_DIGITAL_FILTER(FILTER) ((FILTER) <= 0x0000000FU)
|
||||
|
||||
#if defined(SYSCFG_PMC_I2C4_FMP)
|
||||
#define IS_I2C_FASTMODEPLUS(__CONFIG__) ((((__CONFIG__) & I2C_FASTMODEPLUS_PB6) == I2C_FASTMODEPLUS_PB6) || \
|
||||
(((__CONFIG__) & I2C_FASTMODEPLUS_PB7) == I2C_FASTMODEPLUS_PB7) || \
|
||||
(((__CONFIG__) & I2C_FASTMODEPLUS_PB8) == I2C_FASTMODEPLUS_PB8) || \
|
||||
(((__CONFIG__) & I2C_FASTMODEPLUS_PB9) == I2C_FASTMODEPLUS_PB9) || \
|
||||
(((__CONFIG__) & I2C_FASTMODEPLUS_I2C1) == I2C_FASTMODEPLUS_I2C1) || \
|
||||
(((__CONFIG__) & I2C_FASTMODEPLUS_I2C2) == I2C_FASTMODEPLUS_I2C2) || \
|
||||
(((__CONFIG__) & I2C_FASTMODEPLUS_I2C3) == I2C_FASTMODEPLUS_I2C3) || \
|
||||
(((__CONFIG__) & I2C_FASTMODEPLUS_I2C4) == I2C_FASTMODEPLUS_I2C4))
|
||||
#elif defined(SYSCFG_PMC_I2C3_FMP)
|
||||
#define IS_I2C_FASTMODEPLUS(__CONFIG__) ((((__CONFIG__) & I2C_FASTMODEPLUS_PB6) == I2C_FASTMODEPLUS_PB6) || \
|
||||
(((__CONFIG__) & I2C_FASTMODEPLUS_PB7) == I2C_FASTMODEPLUS_PB7) || \
|
||||
(((__CONFIG__) & I2C_FASTMODEPLUS_PB8) == I2C_FASTMODEPLUS_PB8) || \
|
||||
(((__CONFIG__) & I2C_FASTMODEPLUS_PB9) == I2C_FASTMODEPLUS_PB9) || \
|
||||
(((__CONFIG__) & I2C_FASTMODEPLUS_I2C1) == I2C_FASTMODEPLUS_I2C1) || \
|
||||
(((__CONFIG__) & I2C_FASTMODEPLUS_I2C2) == I2C_FASTMODEPLUS_I2C2) || \
|
||||
(((__CONFIG__) & I2C_FASTMODEPLUS_I2C3) == I2C_FASTMODEPLUS_I2C3))
|
||||
#elif defined(SYSCFG_PMC_I2C2_FMP)
|
||||
#define IS_I2C_FASTMODEPLUS(__CONFIG__) ((((__CONFIG__) & I2C_FASTMODEPLUS_PB6) == I2C_FASTMODEPLUS_PB6) || \
|
||||
(((__CONFIG__) & I2C_FASTMODEPLUS_PB7) == I2C_FASTMODEPLUS_PB7) || \
|
||||
(((__CONFIG__) & I2C_FASTMODEPLUS_PB8) == I2C_FASTMODEPLUS_PB8) || \
|
||||
(((__CONFIG__) & I2C_FASTMODEPLUS_PB9) == I2C_FASTMODEPLUS_PB9) || \
|
||||
(((__CONFIG__) & I2C_FASTMODEPLUS_I2C1) == I2C_FASTMODEPLUS_I2C1) || \
|
||||
(((__CONFIG__) & I2C_FASTMODEPLUS_I2C2) == I2C_FASTMODEPLUS_I2C2))
|
||||
#elif defined(SYSCFG_PMC_I2C1_FMP)
|
||||
#define IS_I2C_FASTMODEPLUS(__CONFIG__) ((((__CONFIG__) & I2C_FASTMODEPLUS_PB6) == I2C_FASTMODEPLUS_PB6) || \
|
||||
(((__CONFIG__) & I2C_FASTMODEPLUS_PB7) == I2C_FASTMODEPLUS_PB7) || \
|
||||
(((__CONFIG__) & I2C_FASTMODEPLUS_PB8) == I2C_FASTMODEPLUS_PB8) || \
|
||||
(((__CONFIG__) & I2C_FASTMODEPLUS_PB9) == I2C_FASTMODEPLUS_PB9) || \
|
||||
(((__CONFIG__) & I2C_FASTMODEPLUS_I2C1) == I2C_FASTMODEPLUS_I2C1))
|
||||
#endif /* SYSCFG_PMC_I2C1_FMP && SYSCFG_PMC_I2C2_FMP && SYSCFG_PMC_I2C3_FMP && SYSCFG_PMC_I2C4_FMP */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private Functions ---------------------------------------------------------*/
|
||||
/** @defgroup I2CEx_Private_Functions I2C Extended Private Functions
|
||||
* @{
|
||||
*/
|
||||
/* Private functions are defined in stm32f7xx_hal_i2c_ex.c file */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* STM32F7xx_HAL_I2C_EX_H */
|
||||
719
project/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_ltdc.h
Normal file
719
project/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_ltdc.h
Normal file
@@ -0,0 +1,719 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f7xx_hal_ltdc.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of LTDC HAL module.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef STM32F7xx_HAL_LTDC_H
|
||||
#define STM32F7xx_HAL_LTDC_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f7xx_hal_def.h"
|
||||
|
||||
#if defined (LTDC)
|
||||
|
||||
/** @addtogroup STM32F7xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup LTDC LTDC
|
||||
* @brief LTDC HAL module driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/** @defgroup LTDC_Exported_Types LTDC Exported Types
|
||||
* @{
|
||||
*/
|
||||
#define MAX_LAYER 2U
|
||||
|
||||
/**
|
||||
* @brief LTDC color structure definition
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint8_t Blue; /*!< Configures the blue value.
|
||||
This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. */
|
||||
|
||||
uint8_t Green; /*!< Configures the green value.
|
||||
This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. */
|
||||
|
||||
uint8_t Red; /*!< Configures the red value.
|
||||
This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. */
|
||||
|
||||
uint8_t Reserved; /*!< Reserved 0xFF */
|
||||
} LTDC_ColorTypeDef;
|
||||
|
||||
/**
|
||||
* @brief LTDC Init structure definition
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint32_t HSPolarity; /*!< configures the horizontal synchronization polarity.
|
||||
This parameter can be one value of @ref LTDC_HS_POLARITY */
|
||||
|
||||
uint32_t VSPolarity; /*!< configures the vertical synchronization polarity.
|
||||
This parameter can be one value of @ref LTDC_VS_POLARITY */
|
||||
|
||||
uint32_t DEPolarity; /*!< configures the data enable polarity.
|
||||
This parameter can be one of value of @ref LTDC_DE_POLARITY */
|
||||
|
||||
uint32_t PCPolarity; /*!< configures the pixel clock polarity.
|
||||
This parameter can be one of value of @ref LTDC_PC_POLARITY */
|
||||
|
||||
uint32_t HorizontalSync; /*!< configures the number of Horizontal synchronization width.
|
||||
This parameter must be a number between
|
||||
Min_Data = 0x000 and Max_Data = 0xFFF. */
|
||||
|
||||
uint32_t VerticalSync; /*!< configures the number of Vertical synchronization height.
|
||||
This parameter must be a number between
|
||||
Min_Data = 0x000 and Max_Data = 0x7FF. */
|
||||
|
||||
uint32_t AccumulatedHBP; /*!< configures the accumulated horizontal back porch width.
|
||||
This parameter must be a number between
|
||||
Min_Data = LTDC_HorizontalSync and Max_Data = 0xFFF. */
|
||||
|
||||
uint32_t AccumulatedVBP; /*!< configures the accumulated vertical back porch height.
|
||||
This parameter must be a number between
|
||||
Min_Data = LTDC_VerticalSync and Max_Data = 0x7FF. */
|
||||
|
||||
uint32_t AccumulatedActiveW; /*!< configures the accumulated active width.
|
||||
This parameter must be a number between
|
||||
Min_Data = LTDC_AccumulatedHBP and Max_Data = 0xFFF. */
|
||||
|
||||
uint32_t AccumulatedActiveH; /*!< configures the accumulated active height.
|
||||
This parameter must be a number between
|
||||
Min_Data = LTDC_AccumulatedVBP and Max_Data = 0x7FF. */
|
||||
|
||||
uint32_t TotalWidth; /*!< configures the total width.
|
||||
This parameter must be a number between
|
||||
Min_Data = LTDC_AccumulatedActiveW and Max_Data = 0xFFF. */
|
||||
|
||||
uint32_t TotalHeigh; /*!< configures the total height.
|
||||
This parameter must be a number between
|
||||
Min_Data = LTDC_AccumulatedActiveH and Max_Data = 0x7FF. */
|
||||
|
||||
LTDC_ColorTypeDef Backcolor; /*!< Configures the background color. */
|
||||
} LTDC_InitTypeDef;
|
||||
|
||||
/**
|
||||
* @brief LTDC Layer structure definition
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint32_t WindowX0; /*!< Configures the Window Horizontal Start Position.
|
||||
This parameter must be a number between
|
||||
Min_Data = 0x000 and Max_Data = 0xFFF. */
|
||||
|
||||
uint32_t WindowX1; /*!< Configures the Window Horizontal Stop Position.
|
||||
This parameter must be a number between
|
||||
Min_Data = 0x000 and Max_Data = 0xFFF. */
|
||||
|
||||
uint32_t WindowY0; /*!< Configures the Window vertical Start Position.
|
||||
This parameter must be a number between
|
||||
Min_Data = 0x000 and Max_Data = 0x7FF. */
|
||||
|
||||
uint32_t WindowY1; /*!< Configures the Window vertical Stop Position.
|
||||
This parameter must be a number between
|
||||
Min_Data = 0x0000 and Max_Data = 0x7FF. */
|
||||
|
||||
uint32_t PixelFormat; /*!< Specifies the pixel format.
|
||||
This parameter can be one of value of @ref LTDC_Pixelformat */
|
||||
|
||||
uint32_t Alpha; /*!< Specifies the constant alpha used for blending.
|
||||
This parameter must be a number between
|
||||
Min_Data = 0x00 and Max_Data = 0xFF. */
|
||||
|
||||
uint32_t Alpha0; /*!< Configures the default alpha value.
|
||||
This parameter must be a number between
|
||||
Min_Data = 0x00 and Max_Data = 0xFF. */
|
||||
|
||||
uint32_t BlendingFactor1; /*!< Select the blending factor 1.
|
||||
This parameter can be one of value of @ref LTDC_BlendingFactor1 */
|
||||
|
||||
uint32_t BlendingFactor2; /*!< Select the blending factor 2.
|
||||
This parameter can be one of value of @ref LTDC_BlendingFactor2 */
|
||||
|
||||
uint32_t FBStartAdress; /*!< Configures the color frame buffer address */
|
||||
|
||||
uint32_t ImageWidth; /*!< Configures the color frame buffer line length.
|
||||
This parameter must be a number between
|
||||
Min_Data = 0x0000 and Max_Data = 0x1FFF. */
|
||||
|
||||
uint32_t ImageHeight; /*!< Specifies the number of line in frame buffer.
|
||||
This parameter must be a number between
|
||||
Min_Data = 0x000 and Max_Data = 0x7FF. */
|
||||
|
||||
LTDC_ColorTypeDef Backcolor; /*!< Configures the layer background color. */
|
||||
} LTDC_LayerCfgTypeDef;
|
||||
|
||||
/**
|
||||
* @brief HAL LTDC State structures definition
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
HAL_LTDC_STATE_RESET = 0x00U, /*!< LTDC not yet initialized or disabled */
|
||||
HAL_LTDC_STATE_READY = 0x01U, /*!< LTDC initialized and ready for use */
|
||||
HAL_LTDC_STATE_BUSY = 0x02U, /*!< LTDC internal process is ongoing */
|
||||
HAL_LTDC_STATE_TIMEOUT = 0x03U, /*!< LTDC Timeout state */
|
||||
HAL_LTDC_STATE_ERROR = 0x04U /*!< LTDC state error */
|
||||
} HAL_LTDC_StateTypeDef;
|
||||
|
||||
/**
|
||||
* @brief LTDC handle Structure definition
|
||||
*/
|
||||
#if (USE_HAL_LTDC_REGISTER_CALLBACKS == 1)
|
||||
typedef struct __LTDC_HandleTypeDef
|
||||
#else
|
||||
typedef struct
|
||||
#endif /* USE_HAL_LTDC_REGISTER_CALLBACKS */
|
||||
{
|
||||
LTDC_TypeDef *Instance; /*!< LTDC Register base address */
|
||||
|
||||
LTDC_InitTypeDef Init; /*!< LTDC parameters */
|
||||
|
||||
LTDC_LayerCfgTypeDef LayerCfg[MAX_LAYER]; /*!< LTDC Layers parameters */
|
||||
|
||||
HAL_LockTypeDef Lock; /*!< LTDC Lock */
|
||||
|
||||
__IO HAL_LTDC_StateTypeDef State; /*!< LTDC state */
|
||||
|
||||
__IO uint32_t ErrorCode; /*!< LTDC Error code */
|
||||
|
||||
#if (USE_HAL_LTDC_REGISTER_CALLBACKS == 1)
|
||||
void (* LineEventCallback)(struct __LTDC_HandleTypeDef *hltdc); /*!< LTDC Line Event Callback */
|
||||
void (* ReloadEventCallback)(struct __LTDC_HandleTypeDef *hltdc); /*!< LTDC Reload Event Callback */
|
||||
void (* ErrorCallback)(struct __LTDC_HandleTypeDef *hltdc); /*!< LTDC Error Callback */
|
||||
|
||||
void (* MspInitCallback)(struct __LTDC_HandleTypeDef *hltdc); /*!< LTDC Msp Init callback */
|
||||
void (* MspDeInitCallback)(struct __LTDC_HandleTypeDef *hltdc); /*!< LTDC Msp DeInit callback */
|
||||
|
||||
#endif /* USE_HAL_LTDC_REGISTER_CALLBACKS */
|
||||
|
||||
|
||||
} LTDC_HandleTypeDef;
|
||||
|
||||
#if (USE_HAL_LTDC_REGISTER_CALLBACKS == 1)
|
||||
/**
|
||||
* @brief HAL LTDC Callback ID enumeration definition
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
HAL_LTDC_MSPINIT_CB_ID = 0x00U, /*!< LTDC MspInit callback ID */
|
||||
HAL_LTDC_MSPDEINIT_CB_ID = 0x01U, /*!< LTDC MspDeInit callback ID */
|
||||
|
||||
HAL_LTDC_LINE_EVENT_CB_ID = 0x02U, /*!< LTDC Line Event Callback ID */
|
||||
HAL_LTDC_RELOAD_EVENT_CB_ID = 0x03U, /*!< LTDC Reload Callback ID */
|
||||
HAL_LTDC_ERROR_CB_ID = 0x04U /*!< LTDC Error Callback ID */
|
||||
|
||||
} HAL_LTDC_CallbackIDTypeDef;
|
||||
|
||||
/**
|
||||
* @brief HAL LTDC Callback pointer definition
|
||||
*/
|
||||
typedef void (*pLTDC_CallbackTypeDef)(LTDC_HandleTypeDef *hltdc); /*!< pointer to an LTDC callback function */
|
||||
|
||||
#endif /* USE_HAL_LTDC_REGISTER_CALLBACKS */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/** @defgroup LTDC_Exported_Constants LTDC Exported Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup LTDC_Error_Code LTDC Error Code
|
||||
* @{
|
||||
*/
|
||||
#define HAL_LTDC_ERROR_NONE 0x00000000U /*!< LTDC No error */
|
||||
#define HAL_LTDC_ERROR_TE 0x00000001U /*!< LTDC Transfer error */
|
||||
#define HAL_LTDC_ERROR_FU 0x00000002U /*!< LTDC FIFO Underrun */
|
||||
#define HAL_LTDC_ERROR_TIMEOUT 0x00000020U /*!< LTDC Timeout error */
|
||||
#if (USE_HAL_LTDC_REGISTER_CALLBACKS == 1)
|
||||
#define HAL_LTDC_ERROR_INVALID_CALLBACK 0x00000040U /*!< LTDC Invalid Callback error */
|
||||
#endif /* USE_HAL_LTDC_REGISTER_CALLBACKS */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup LTDC_Layer LTDC Layer
|
||||
* @{
|
||||
*/
|
||||
#define LTDC_LAYER_1 0x00000000U /*!< LTDC Layer 1 */
|
||||
#define LTDC_LAYER_2 0x00000001U /*!< LTDC Layer 2 */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup LTDC_HS_POLARITY LTDC HS POLARITY
|
||||
* @{
|
||||
*/
|
||||
#define LTDC_HSPOLARITY_AL 0x00000000U /*!< Horizontal Synchronization is active low. */
|
||||
#define LTDC_HSPOLARITY_AH LTDC_GCR_HSPOL /*!< Horizontal Synchronization is active high. */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup LTDC_VS_POLARITY LTDC VS POLARITY
|
||||
* @{
|
||||
*/
|
||||
#define LTDC_VSPOLARITY_AL 0x00000000U /*!< Vertical Synchronization is active low. */
|
||||
#define LTDC_VSPOLARITY_AH LTDC_GCR_VSPOL /*!< Vertical Synchronization is active high. */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup LTDC_DE_POLARITY LTDC DE POLARITY
|
||||
* @{
|
||||
*/
|
||||
#define LTDC_DEPOLARITY_AL 0x00000000U /*!< Data Enable, is active low. */
|
||||
#define LTDC_DEPOLARITY_AH LTDC_GCR_DEPOL /*!< Data Enable, is active high. */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup LTDC_PC_POLARITY LTDC PC POLARITY
|
||||
* @{
|
||||
*/
|
||||
#define LTDC_PCPOLARITY_IPC 0x00000000U /*!< input pixel clock. */
|
||||
#define LTDC_PCPOLARITY_IIPC LTDC_GCR_PCPOL /*!< inverted input pixel clock. */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup LTDC_SYNC LTDC SYNC
|
||||
* @{
|
||||
*/
|
||||
#define LTDC_HORIZONTALSYNC (LTDC_SSCR_HSW >> 16U) /*!< Horizontal synchronization width. */
|
||||
#define LTDC_VERTICALSYNC LTDC_SSCR_VSH /*!< Vertical synchronization height. */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup LTDC_BACK_COLOR LTDC BACK COLOR
|
||||
* @{
|
||||
*/
|
||||
#define LTDC_COLOR 0x000000FFU /*!< Color mask */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup LTDC_BlendingFactor1 LTDC Blending Factor1
|
||||
* @{
|
||||
*/
|
||||
#define LTDC_BLENDING_FACTOR1_CA 0x00000400U /*!< Blending factor : Cte Alpha */
|
||||
#define LTDC_BLENDING_FACTOR1_PAxCA 0x00000600U /*!< Blending factor : Cte Alpha x Pixel Alpha*/
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup LTDC_BlendingFactor2 LTDC Blending Factor2
|
||||
* @{
|
||||
*/
|
||||
#define LTDC_BLENDING_FACTOR2_CA 0x00000005U /*!< Blending factor : Cte Alpha */
|
||||
#define LTDC_BLENDING_FACTOR2_PAxCA 0x00000007U /*!< Blending factor : Cte Alpha x Pixel Alpha*/
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup LTDC_Pixelformat LTDC Pixel format
|
||||
* @{
|
||||
*/
|
||||
#define LTDC_PIXEL_FORMAT_ARGB8888 0x00000000U /*!< ARGB8888 LTDC pixel format */
|
||||
#define LTDC_PIXEL_FORMAT_RGB888 0x00000001U /*!< RGB888 LTDC pixel format */
|
||||
#define LTDC_PIXEL_FORMAT_RGB565 0x00000002U /*!< RGB565 LTDC pixel format */
|
||||
#define LTDC_PIXEL_FORMAT_ARGB1555 0x00000003U /*!< ARGB1555 LTDC pixel format */
|
||||
#define LTDC_PIXEL_FORMAT_ARGB4444 0x00000004U /*!< ARGB4444 LTDC pixel format */
|
||||
#define LTDC_PIXEL_FORMAT_L8 0x00000005U /*!< L8 LTDC pixel format */
|
||||
#define LTDC_PIXEL_FORMAT_AL44 0x00000006U /*!< AL44 LTDC pixel format */
|
||||
#define LTDC_PIXEL_FORMAT_AL88 0x00000007U /*!< AL88 LTDC pixel format */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup LTDC_Alpha LTDC Alpha
|
||||
* @{
|
||||
*/
|
||||
#define LTDC_ALPHA LTDC_LxCACR_CONSTA /*!< LTDC Constant Alpha mask */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup LTDC_LAYER_Config LTDC LAYER Config
|
||||
* @{
|
||||
*/
|
||||
#define LTDC_STOPPOSITION (LTDC_LxWHPCR_WHSPPOS >> 16U) /*!< LTDC Layer stop position */
|
||||
#define LTDC_STARTPOSITION LTDC_LxWHPCR_WHSTPOS /*!< LTDC Layer start position */
|
||||
|
||||
#define LTDC_COLOR_FRAME_BUFFER LTDC_LxCFBLR_CFBLL /*!< LTDC Layer Line length */
|
||||
#define LTDC_LINE_NUMBER LTDC_LxCFBLNR_CFBLNBR /*!< LTDC Layer Line number */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup LTDC_Interrupts LTDC Interrupts
|
||||
* @{
|
||||
*/
|
||||
#define LTDC_IT_LI LTDC_IER_LIE /*!< LTDC Line Interrupt */
|
||||
#define LTDC_IT_FU LTDC_IER_FUIE /*!< LTDC FIFO Underrun Interrupt */
|
||||
#define LTDC_IT_TE LTDC_IER_TERRIE /*!< LTDC Transfer Error Interrupt */
|
||||
#define LTDC_IT_RR LTDC_IER_RRIE /*!< LTDC Register Reload Interrupt */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup LTDC_Flags LTDC Flags
|
||||
* @{
|
||||
*/
|
||||
#define LTDC_FLAG_LI LTDC_ISR_LIF /*!< LTDC Line Interrupt Flag */
|
||||
#define LTDC_FLAG_FU LTDC_ISR_FUIF /*!< LTDC FIFO Underrun interrupt Flag */
|
||||
#define LTDC_FLAG_TE LTDC_ISR_TERRIF /*!< LTDC Transfer Error interrupt Flag */
|
||||
#define LTDC_FLAG_RR LTDC_ISR_RRIF /*!< LTDC Register Reload interrupt Flag */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup LTDC_Reload_Type LTDC Reload Type
|
||||
* @{
|
||||
*/
|
||||
#define LTDC_RELOAD_IMMEDIATE LTDC_SRCR_IMR /*!< Immediate Reload */
|
||||
#define LTDC_RELOAD_VERTICAL_BLANKING LTDC_SRCR_VBR /*!< Vertical Blanking Reload */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/** @defgroup LTDC_Exported_Macros LTDC Exported Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @brief Reset LTDC handle state.
|
||||
* @param __HANDLE__ LTDC handle
|
||||
* @retval None
|
||||
*/
|
||||
#if (USE_HAL_LTDC_REGISTER_CALLBACKS == 1)
|
||||
#define __HAL_LTDC_RESET_HANDLE_STATE(__HANDLE__) do{ \
|
||||
(__HANDLE__)->State = HAL_LTDC_STATE_RESET; \
|
||||
(__HANDLE__)->MspInitCallback = NULL; \
|
||||
(__HANDLE__)->MspDeInitCallback = NULL; \
|
||||
} while(0)
|
||||
#else
|
||||
#define __HAL_LTDC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_LTDC_STATE_RESET)
|
||||
#endif /*USE_HAL_LTDC_REGISTER_CALLBACKS */
|
||||
|
||||
/**
|
||||
* @brief Enable the LTDC.
|
||||
* @param __HANDLE__ LTDC handle
|
||||
* @retval None.
|
||||
*/
|
||||
#define __HAL_LTDC_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->GCR |= LTDC_GCR_LTDCEN)
|
||||
|
||||
/**
|
||||
* @brief Disable the LTDC.
|
||||
* @param __HANDLE__ LTDC handle
|
||||
* @retval None.
|
||||
*/
|
||||
#define __HAL_LTDC_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->GCR &= ~(LTDC_GCR_LTDCEN))
|
||||
|
||||
/**
|
||||
* @brief Enable the LTDC Layer.
|
||||
* @param __HANDLE__ LTDC handle
|
||||
* @param __LAYER__ Specify the layer to be enabled.
|
||||
* This parameter can be LTDC_LAYER_1 (0) or LTDC_LAYER_2 (1).
|
||||
* @retval None.
|
||||
*/
|
||||
#define __HAL_LTDC_LAYER_ENABLE(__HANDLE__, __LAYER__) ((LTDC_LAYER((__HANDLE__), (__LAYER__)))->CR\
|
||||
|= (uint32_t)LTDC_LxCR_LEN)
|
||||
|
||||
/**
|
||||
* @brief Disable the LTDC Layer.
|
||||
* @param __HANDLE__ LTDC handle
|
||||
* @param __LAYER__ Specify the layer to be disabled.
|
||||
* This parameter can be LTDC_LAYER_1 (0) or LTDC_LAYER_2 (1).
|
||||
* @retval None.
|
||||
*/
|
||||
#define __HAL_LTDC_LAYER_DISABLE(__HANDLE__, __LAYER__) ((LTDC_LAYER((__HANDLE__), (__LAYER__)))->CR\
|
||||
&= ~(uint32_t)LTDC_LxCR_LEN)
|
||||
|
||||
/**
|
||||
* @brief Reload immediately all LTDC Layers.
|
||||
* @param __HANDLE__ LTDC handle
|
||||
* @retval None.
|
||||
*/
|
||||
#define __HAL_LTDC_RELOAD_IMMEDIATE_CONFIG(__HANDLE__) ((__HANDLE__)->Instance->SRCR |= LTDC_SRCR_IMR)
|
||||
|
||||
/**
|
||||
* @brief Reload during vertical blanking period all LTDC Layers.
|
||||
* @param __HANDLE__ LTDC handle
|
||||
* @retval None.
|
||||
*/
|
||||
#define __HAL_LTDC_VERTICAL_BLANKING_RELOAD_CONFIG(__HANDLE__) ((__HANDLE__)->Instance->SRCR |= LTDC_SRCR_VBR)
|
||||
|
||||
/* Interrupt & Flag management */
|
||||
/**
|
||||
* @brief Get the LTDC pending flags.
|
||||
* @param __HANDLE__ LTDC handle
|
||||
* @param __FLAG__ Get the specified flag.
|
||||
* This parameter can be any combination of the following values:
|
||||
* @arg LTDC_FLAG_LI: Line Interrupt flag
|
||||
* @arg LTDC_FLAG_FU: FIFO Underrun Interrupt flag
|
||||
* @arg LTDC_FLAG_TE: Transfer Error interrupt flag
|
||||
* @arg LTDC_FLAG_RR: Register Reload Interrupt Flag
|
||||
* @retval The state of FLAG (SET or RESET).
|
||||
*/
|
||||
#define __HAL_LTDC_GET_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR & (__FLAG__))
|
||||
|
||||
/**
|
||||
* @brief Clears the LTDC pending flags.
|
||||
* @param __HANDLE__ LTDC handle
|
||||
* @param __FLAG__ Specify the flag to clear.
|
||||
* This parameter can be any combination of the following values:
|
||||
* @arg LTDC_FLAG_LI: Line Interrupt flag
|
||||
* @arg LTDC_FLAG_FU: FIFO Underrun Interrupt flag
|
||||
* @arg LTDC_FLAG_TE: Transfer Error interrupt flag
|
||||
* @arg LTDC_FLAG_RR: Register Reload Interrupt Flag
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_LTDC_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ICR = (__FLAG__))
|
||||
|
||||
/**
|
||||
* @brief Enables the specified LTDC interrupts.
|
||||
* @param __HANDLE__ LTDC handle
|
||||
* @param __INTERRUPT__ Specify the LTDC interrupt sources to be enabled.
|
||||
* This parameter can be any combination of the following values:
|
||||
* @arg LTDC_IT_LI: Line Interrupt flag
|
||||
* @arg LTDC_IT_FU: FIFO Underrun Interrupt flag
|
||||
* @arg LTDC_IT_TE: Transfer Error interrupt flag
|
||||
* @arg LTDC_IT_RR: Register Reload Interrupt Flag
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_LTDC_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER |= (__INTERRUPT__))
|
||||
|
||||
/**
|
||||
* @brief Disables the specified LTDC interrupts.
|
||||
* @param __HANDLE__ LTDC handle
|
||||
* @param __INTERRUPT__ Specify the LTDC interrupt sources to be disabled.
|
||||
* This parameter can be any combination of the following values:
|
||||
* @arg LTDC_IT_LI: Line Interrupt flag
|
||||
* @arg LTDC_IT_FU: FIFO Underrun Interrupt flag
|
||||
* @arg LTDC_IT_TE: Transfer Error interrupt flag
|
||||
* @arg LTDC_IT_RR: Register Reload Interrupt Flag
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_LTDC_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER &= ~(__INTERRUPT__))
|
||||
|
||||
/**
|
||||
* @brief Check whether the specified LTDC interrupt has occurred or not.
|
||||
* @param __HANDLE__ LTDC handle
|
||||
* @param __INTERRUPT__ Specify the LTDC interrupt source to check.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg LTDC_IT_LI: Line Interrupt flag
|
||||
* @arg LTDC_IT_FU: FIFO Underrun Interrupt flag
|
||||
* @arg LTDC_IT_TE: Transfer Error interrupt flag
|
||||
* @arg LTDC_IT_RR: Register Reload Interrupt Flag
|
||||
* @retval The state of INTERRUPT (SET or RESET).
|
||||
*/
|
||||
#define __HAL_LTDC_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER & (__INTERRUPT__))
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Include LTDC HAL Extension module */
|
||||
#include "stm32f7xx_hal_ltdc_ex.h"
|
||||
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @addtogroup LTDC_Exported_Functions
|
||||
* @{
|
||||
*/
|
||||
/** @addtogroup LTDC_Exported_Functions_Group1
|
||||
* @{
|
||||
*/
|
||||
/* Initialization and de-initialization functions *****************************/
|
||||
HAL_StatusTypeDef HAL_LTDC_Init(LTDC_HandleTypeDef *hltdc);
|
||||
HAL_StatusTypeDef HAL_LTDC_DeInit(LTDC_HandleTypeDef *hltdc);
|
||||
void HAL_LTDC_MspInit(LTDC_HandleTypeDef *hltdc);
|
||||
void HAL_LTDC_MspDeInit(LTDC_HandleTypeDef *hltdc);
|
||||
void HAL_LTDC_ErrorCallback(LTDC_HandleTypeDef *hltdc);
|
||||
void HAL_LTDC_LineEventCallback(LTDC_HandleTypeDef *hltdc);
|
||||
void HAL_LTDC_ReloadEventCallback(LTDC_HandleTypeDef *hltdc);
|
||||
|
||||
/* Callbacks Register/UnRegister functions ***********************************/
|
||||
#if (USE_HAL_LTDC_REGISTER_CALLBACKS == 1)
|
||||
HAL_StatusTypeDef HAL_LTDC_RegisterCallback(LTDC_HandleTypeDef *hltdc, HAL_LTDC_CallbackIDTypeDef CallbackID,
|
||||
pLTDC_CallbackTypeDef pCallback);
|
||||
HAL_StatusTypeDef HAL_LTDC_UnRegisterCallback(LTDC_HandleTypeDef *hltdc, HAL_LTDC_CallbackIDTypeDef CallbackID);
|
||||
#endif /* USE_HAL_LTDC_REGISTER_CALLBACKS */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup LTDC_Exported_Functions_Group2
|
||||
* @{
|
||||
*/
|
||||
/* IO operation functions *****************************************************/
|
||||
void HAL_LTDC_IRQHandler(LTDC_HandleTypeDef *hltdc);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup LTDC_Exported_Functions_Group3
|
||||
* @{
|
||||
*/
|
||||
/* Peripheral Control functions ***********************************************/
|
||||
HAL_StatusTypeDef HAL_LTDC_ConfigLayer(LTDC_HandleTypeDef *hltdc, LTDC_LayerCfgTypeDef *pLayerCfg, uint32_t LayerIdx);
|
||||
HAL_StatusTypeDef HAL_LTDC_SetWindowSize(LTDC_HandleTypeDef *hltdc, uint32_t XSize, uint32_t YSize, uint32_t LayerIdx);
|
||||
HAL_StatusTypeDef HAL_LTDC_SetWindowPosition(LTDC_HandleTypeDef *hltdc, uint32_t X0, uint32_t Y0, uint32_t LayerIdx);
|
||||
HAL_StatusTypeDef HAL_LTDC_SetPixelFormat(LTDC_HandleTypeDef *hltdc, uint32_t Pixelformat, uint32_t LayerIdx);
|
||||
HAL_StatusTypeDef HAL_LTDC_SetAlpha(LTDC_HandleTypeDef *hltdc, uint32_t Alpha, uint32_t LayerIdx);
|
||||
HAL_StatusTypeDef HAL_LTDC_SetAddress(LTDC_HandleTypeDef *hltdc, uint32_t Address, uint32_t LayerIdx);
|
||||
HAL_StatusTypeDef HAL_LTDC_SetPitch(LTDC_HandleTypeDef *hltdc, uint32_t LinePitchInPixels, uint32_t LayerIdx);
|
||||
HAL_StatusTypeDef HAL_LTDC_ConfigColorKeying(LTDC_HandleTypeDef *hltdc, uint32_t RGBValue, uint32_t LayerIdx);
|
||||
HAL_StatusTypeDef HAL_LTDC_ConfigCLUT(LTDC_HandleTypeDef *hltdc, uint32_t *pCLUT, uint32_t CLUTSize, uint32_t LayerIdx);
|
||||
HAL_StatusTypeDef HAL_LTDC_EnableColorKeying(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx);
|
||||
HAL_StatusTypeDef HAL_LTDC_DisableColorKeying(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx);
|
||||
HAL_StatusTypeDef HAL_LTDC_EnableCLUT(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx);
|
||||
HAL_StatusTypeDef HAL_LTDC_DisableCLUT(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx);
|
||||
HAL_StatusTypeDef HAL_LTDC_ProgramLineEvent(LTDC_HandleTypeDef *hltdc, uint32_t Line);
|
||||
HAL_StatusTypeDef HAL_LTDC_EnableDither(LTDC_HandleTypeDef *hltdc);
|
||||
HAL_StatusTypeDef HAL_LTDC_DisableDither(LTDC_HandleTypeDef *hltdc);
|
||||
HAL_StatusTypeDef HAL_LTDC_Reload(LTDC_HandleTypeDef *hltdc, uint32_t ReloadType);
|
||||
HAL_StatusTypeDef HAL_LTDC_ConfigLayer_NoReload(LTDC_HandleTypeDef *hltdc, LTDC_LayerCfgTypeDef *pLayerCfg,
|
||||
uint32_t LayerIdx);
|
||||
HAL_StatusTypeDef HAL_LTDC_SetWindowSize_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t XSize, uint32_t YSize,
|
||||
uint32_t LayerIdx);
|
||||
HAL_StatusTypeDef HAL_LTDC_SetWindowPosition_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t X0, uint32_t Y0,
|
||||
uint32_t LayerIdx);
|
||||
HAL_StatusTypeDef HAL_LTDC_SetPixelFormat_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t Pixelformat, uint32_t LayerIdx);
|
||||
HAL_StatusTypeDef HAL_LTDC_SetAlpha_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t Alpha, uint32_t LayerIdx);
|
||||
HAL_StatusTypeDef HAL_LTDC_SetAddress_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t Address, uint32_t LayerIdx);
|
||||
HAL_StatusTypeDef HAL_LTDC_SetPitch_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t LinePitchInPixels, uint32_t LayerIdx);
|
||||
HAL_StatusTypeDef HAL_LTDC_ConfigColorKeying_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t RGBValue, uint32_t LayerIdx);
|
||||
HAL_StatusTypeDef HAL_LTDC_EnableColorKeying_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx);
|
||||
HAL_StatusTypeDef HAL_LTDC_DisableColorKeying_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx);
|
||||
HAL_StatusTypeDef HAL_LTDC_EnableCLUT_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx);
|
||||
HAL_StatusTypeDef HAL_LTDC_DisableCLUT_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx);
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup LTDC_Exported_Functions_Group4
|
||||
* @{
|
||||
*/
|
||||
/* Peripheral State functions *************************************************/
|
||||
HAL_LTDC_StateTypeDef HAL_LTDC_GetState(LTDC_HandleTypeDef *hltdc);
|
||||
uint32_t HAL_LTDC_GetError(LTDC_HandleTypeDef *hltdc);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private types -------------------------------------------------------------*/
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
/* Private constants ---------------------------------------------------------*/
|
||||
/* Private macros ------------------------------------------------------------*/
|
||||
/** @defgroup LTDC_Private_Macros LTDC Private Macros
|
||||
* @{
|
||||
*/
|
||||
#define LTDC_LAYER(__HANDLE__, __LAYER__) ((LTDC_Layer_TypeDef *)((uint32_t)(\
|
||||
((uint32_t)((__HANDLE__)->Instance))\
|
||||
+ 0x84U + (0x80U*(__LAYER__)))))
|
||||
#define IS_LTDC_LAYER(__LAYER__) ((__LAYER__) < MAX_LAYER)
|
||||
#define IS_LTDC_HSPOL(__HSPOL__) (((__HSPOL__) == LTDC_HSPOLARITY_AL)\
|
||||
|| ((__HSPOL__) == LTDC_HSPOLARITY_AH))
|
||||
#define IS_LTDC_VSPOL(__VSPOL__) (((__VSPOL__) == LTDC_VSPOLARITY_AL)\
|
||||
|| ((__VSPOL__) == LTDC_VSPOLARITY_AH))
|
||||
#define IS_LTDC_DEPOL(__DEPOL__) (((__DEPOL__) == LTDC_DEPOLARITY_AL)\
|
||||
|| ((__DEPOL__) == LTDC_DEPOLARITY_AH))
|
||||
#define IS_LTDC_PCPOL(__PCPOL__) (((__PCPOL__) == LTDC_PCPOLARITY_IPC)\
|
||||
|| ((__PCPOL__) == LTDC_PCPOLARITY_IIPC))
|
||||
#define IS_LTDC_HSYNC(__HSYNC__) ((__HSYNC__) <= LTDC_HORIZONTALSYNC)
|
||||
#define IS_LTDC_VSYNC(__VSYNC__) ((__VSYNC__) <= LTDC_VERTICALSYNC)
|
||||
#define IS_LTDC_AHBP(__AHBP__) ((__AHBP__) <= LTDC_HORIZONTALSYNC)
|
||||
#define IS_LTDC_AVBP(__AVBP__) ((__AVBP__) <= LTDC_VERTICALSYNC)
|
||||
#define IS_LTDC_AAW(__AAW__) ((__AAW__) <= LTDC_HORIZONTALSYNC)
|
||||
#define IS_LTDC_AAH(__AAH__) ((__AAH__) <= LTDC_VERTICALSYNC)
|
||||
#define IS_LTDC_TOTALW(__TOTALW__) ((__TOTALW__) <= LTDC_HORIZONTALSYNC)
|
||||
#define IS_LTDC_TOTALH(__TOTALH__) ((__TOTALH__) <= LTDC_VERTICALSYNC)
|
||||
#define IS_LTDC_BLUEVALUE(__BBLUE__) ((__BBLUE__) <= LTDC_COLOR)
|
||||
#define IS_LTDC_GREENVALUE(__BGREEN__) ((__BGREEN__) <= LTDC_COLOR)
|
||||
#define IS_LTDC_REDVALUE(__BRED__) ((__BRED__) <= LTDC_COLOR)
|
||||
#define IS_LTDC_BLENDING_FACTOR1(__BLENDING_FACTOR1__) (((__BLENDING_FACTOR1__) == LTDC_BLENDING_FACTOR1_CA) || \
|
||||
((__BLENDING_FACTOR1__) == LTDC_BLENDING_FACTOR1_PAxCA))
|
||||
#define IS_LTDC_BLENDING_FACTOR2(__BLENDING_FACTOR1__) (((__BLENDING_FACTOR1__) == LTDC_BLENDING_FACTOR2_CA) || \
|
||||
((__BLENDING_FACTOR1__) == LTDC_BLENDING_FACTOR2_PAxCA))
|
||||
#define IS_LTDC_PIXEL_FORMAT(__PIXEL_FORMAT__) (((__PIXEL_FORMAT__) == LTDC_PIXEL_FORMAT_ARGB8888) || \
|
||||
((__PIXEL_FORMAT__) == LTDC_PIXEL_FORMAT_RGB888) || \
|
||||
((__PIXEL_FORMAT__) == LTDC_PIXEL_FORMAT_RGB565) || \
|
||||
((__PIXEL_FORMAT__) == LTDC_PIXEL_FORMAT_ARGB1555) || \
|
||||
((__PIXEL_FORMAT__) == LTDC_PIXEL_FORMAT_ARGB4444) || \
|
||||
((__PIXEL_FORMAT__) == LTDC_PIXEL_FORMAT_L8) || \
|
||||
((__PIXEL_FORMAT__) == LTDC_PIXEL_FORMAT_AL44) || \
|
||||
((__PIXEL_FORMAT__) == LTDC_PIXEL_FORMAT_AL88))
|
||||
#define IS_LTDC_ALPHA(__ALPHA__) ((__ALPHA__) <= LTDC_ALPHA)
|
||||
#define IS_LTDC_HCONFIGST(__HCONFIGST__) ((__HCONFIGST__) <= LTDC_STARTPOSITION)
|
||||
#define IS_LTDC_HCONFIGSP(__HCONFIGSP__) ((__HCONFIGSP__) <= LTDC_STOPPOSITION)
|
||||
#define IS_LTDC_VCONFIGST(__VCONFIGST__) ((__VCONFIGST__) <= LTDC_STARTPOSITION)
|
||||
#define IS_LTDC_VCONFIGSP(__VCONFIGSP__) ((__VCONFIGSP__) <= LTDC_STOPPOSITION)
|
||||
#define IS_LTDC_CFBP(__CFBP__) ((__CFBP__) <= LTDC_COLOR_FRAME_BUFFER)
|
||||
#define IS_LTDC_CFBLL(__CFBLL__) ((__CFBLL__) <= LTDC_COLOR_FRAME_BUFFER)
|
||||
#define IS_LTDC_CFBLNBR(__CFBLNBR__) ((__CFBLNBR__) <= LTDC_LINE_NUMBER)
|
||||
#define IS_LTDC_LIPOS(__LIPOS__) ((__LIPOS__) <= 0x7FFU)
|
||||
#define IS_LTDC_RELOAD(__RELOADTYPE__) (((__RELOADTYPE__) == LTDC_RELOAD_IMMEDIATE) || \
|
||||
((__RELOADTYPE__) == LTDC_RELOAD_VERTICAL_BLANKING))
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private functions ---------------------------------------------------------*/
|
||||
/** @defgroup LTDC_Private_Functions LTDC Private Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#endif /* LTDC */
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* STM32F7xx_HAL_LTDC_H */
|
||||
|
||||
@@ -0,0 +1,83 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f7xx_hal_ltdc_ex.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of LTDC HAL Extension module.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef STM32F7xx_HAL_LTDC_EX_H
|
||||
#define STM32F7xx_HAL_LTDC_EX_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f7xx_hal_def.h"
|
||||
|
||||
#if defined (LTDC) && defined (DSI)
|
||||
|
||||
#include "stm32f7xx_hal_dsi.h"
|
||||
|
||||
/** @addtogroup STM32F7xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup LTDCEx
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @addtogroup LTDCEx_Exported_Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup LTDCEx_Exported_Functions_Group1
|
||||
* @{
|
||||
*/
|
||||
HAL_StatusTypeDef HAL_LTDCEx_StructInitFromVideoConfig(LTDC_HandleTypeDef *hltdc, DSI_VidCfgTypeDef *VidCfg);
|
||||
HAL_StatusTypeDef HAL_LTDCEx_StructInitFromAdaptedCommandConfig(LTDC_HandleTypeDef *hltdc, DSI_CmdCfgTypeDef *CmdCfg);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private types -------------------------------------------------------------*/
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
/* Private constants ---------------------------------------------------------*/
|
||||
/* Private macros ------------------------------------------------------------*/
|
||||
/* Private functions ---------------------------------------------------------*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#endif /* LTDC && DSI */
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* STM32F7xx_HAL_LTDC_EX_H */
|
||||
402
project/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_pwr.h
Normal file
402
project/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_pwr.h
Normal file
@@ -0,0 +1,402 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f7xx_hal_pwr.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of PWR HAL module.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __STM32F7xx_HAL_PWR_H
|
||||
#define __STM32F7xx_HAL_PWR_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f7xx_hal_def.h"
|
||||
|
||||
/** @addtogroup STM32F7xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup PWR
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
|
||||
/** @defgroup PWR_Exported_Types PWR Exported Types
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief PWR PVD configuration structure definition
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint32_t PVDLevel; /*!< PVDLevel: Specifies the PVD detection level.
|
||||
This parameter can be a value of @ref PWR_PVD_detection_level */
|
||||
|
||||
uint32_t Mode; /*!< Mode: Specifies the operating mode for the selected pins.
|
||||
This parameter can be a value of @ref PWR_PVD_Mode */
|
||||
}PWR_PVDTypeDef;
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/** @defgroup PWR_Exported_Constants PWR Exported Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup PWR_PVD_detection_level PWR PVD detection level
|
||||
* @{
|
||||
*/
|
||||
#define PWR_PVDLEVEL_0 PWR_CR1_PLS_LEV0
|
||||
#define PWR_PVDLEVEL_1 PWR_CR1_PLS_LEV1
|
||||
#define PWR_PVDLEVEL_2 PWR_CR1_PLS_LEV2
|
||||
#define PWR_PVDLEVEL_3 PWR_CR1_PLS_LEV3
|
||||
#define PWR_PVDLEVEL_4 PWR_CR1_PLS_LEV4
|
||||
#define PWR_PVDLEVEL_5 PWR_CR1_PLS_LEV5
|
||||
#define PWR_PVDLEVEL_6 PWR_CR1_PLS_LEV6
|
||||
#define PWR_PVDLEVEL_7 PWR_CR1_PLS_LEV7/* External input analog voltage
|
||||
(Compare internally to VREFINT) */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup PWR_PVD_Mode PWR PVD Mode
|
||||
* @{
|
||||
*/
|
||||
#define PWR_PVD_MODE_NORMAL ((uint32_t)0x00000000U) /*!< basic mode is used */
|
||||
#define PWR_PVD_MODE_IT_RISING ((uint32_t)0x00010001U) /*!< External Interrupt Mode with Rising edge trigger detection */
|
||||
#define PWR_PVD_MODE_IT_FALLING ((uint32_t)0x00010002U) /*!< External Interrupt Mode with Falling edge trigger detection */
|
||||
#define PWR_PVD_MODE_IT_RISING_FALLING ((uint32_t)0x00010003U) /*!< External Interrupt Mode with Rising/Falling edge trigger detection */
|
||||
#define PWR_PVD_MODE_EVENT_RISING ((uint32_t)0x00020001U) /*!< Event Mode with Rising edge trigger detection */
|
||||
#define PWR_PVD_MODE_EVENT_FALLING ((uint32_t)0x00020002U) /*!< Event Mode with Falling edge trigger detection */
|
||||
#define PWR_PVD_MODE_EVENT_RISING_FALLING ((uint32_t)0x00020003U) /*!< Event Mode with Rising/Falling edge trigger detection */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup PWR_Regulator_state_in_STOP_mode PWR Regulator state in SLEEP/STOP mode
|
||||
* @{
|
||||
*/
|
||||
#define PWR_MAINREGULATOR_ON ((uint32_t)0x00000000U)
|
||||
#define PWR_LOWPOWERREGULATOR_ON PWR_CR1_LPDS
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup PWR_SLEEP_mode_entry PWR SLEEP mode entry
|
||||
* @{
|
||||
*/
|
||||
#define PWR_SLEEPENTRY_WFI ((uint8_t)0x01U)
|
||||
#define PWR_SLEEPENTRY_WFE ((uint8_t)0x02U)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup PWR_STOP_mode_entry PWR STOP mode entry
|
||||
* @{
|
||||
*/
|
||||
#define PWR_STOPENTRY_WFI ((uint8_t)0x01U)
|
||||
#define PWR_STOPENTRY_WFE ((uint8_t)0x02U)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup PWR_Regulator_Voltage_Scale PWR Regulator Voltage Scale
|
||||
* @{
|
||||
*/
|
||||
#define PWR_REGULATOR_VOLTAGE_SCALE1 PWR_CR1_VOS
|
||||
#define PWR_REGULATOR_VOLTAGE_SCALE2 PWR_CR1_VOS_1
|
||||
#define PWR_REGULATOR_VOLTAGE_SCALE3 PWR_CR1_VOS_0
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup PWR_Flag PWR Flag
|
||||
* @{
|
||||
*/
|
||||
#define PWR_FLAG_WU PWR_CSR1_WUIF
|
||||
#define PWR_FLAG_SB PWR_CSR1_SBF
|
||||
#define PWR_FLAG_PVDO PWR_CSR1_PVDO
|
||||
#define PWR_FLAG_BRR PWR_CSR1_BRR
|
||||
#define PWR_FLAG_VOSRDY PWR_CSR1_VOSRDY
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/** @defgroup PWR_Exported_Macro PWR Exported Macro
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @brief macros configure the main internal regulator output voltage.
|
||||
* @param __REGULATOR__ specifies the regulator output voltage to achieve
|
||||
* a tradeoff between performance and power consumption when the device does
|
||||
* not operate at the maximum frequency (refer to the datasheets for more details).
|
||||
* This parameter can be one of the following values:
|
||||
* @arg PWR_REGULATOR_VOLTAGE_SCALE1: Regulator voltage output Scale 1 mode
|
||||
* @arg PWR_REGULATOR_VOLTAGE_SCALE2: Regulator voltage output Scale 2 mode
|
||||
* @arg PWR_REGULATOR_VOLTAGE_SCALE3: Regulator voltage output Scale 3 mode
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_PWR_VOLTAGESCALING_CONFIG(__REGULATOR__) do { \
|
||||
__IO uint32_t tmpreg; \
|
||||
MODIFY_REG(PWR->CR1, PWR_CR1_VOS, (__REGULATOR__)); \
|
||||
/* Delay after an RCC peripheral clock enabling */ \
|
||||
tmpreg = READ_BIT(PWR->CR1, PWR_CR1_VOS); \
|
||||
UNUSED(tmpreg); \
|
||||
} while(0)
|
||||
|
||||
/** @brief Check PWR flag is set or not.
|
||||
* @param __FLAG__ specifies the flag to check.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg PWR_FLAG_WU: Wake Up flag. This flag indicates that a wakeup event
|
||||
* was received on the internal wakeup line in standby mode (RTC alarm (Alarm A or Alarm B),
|
||||
* RTC Tamper event, RTC TimeStamp event or RTC Wakeup)).
|
||||
* @arg PWR_FLAG_SB: StandBy flag. This flag indicates that the system was
|
||||
* resumed from StandBy mode.
|
||||
* @arg PWR_FLAG_PVDO: PVD Output. This flag is valid only if PVD is enabled
|
||||
* by the HAL_PWR_EnablePVD() function. The PVD is stopped by Standby mode
|
||||
* For this reason, this bit is equal to 0 after Standby or reset
|
||||
* until the PVDE bit is set.
|
||||
* @arg PWR_FLAG_BRR: Backup regulator ready flag. This bit is not reset
|
||||
* when the device wakes up from Standby mode or by a system reset
|
||||
* or power reset.
|
||||
* @arg PWR_FLAG_VOSRDY: This flag indicates that the Regulator voltage
|
||||
* scaling output selection is ready.
|
||||
* @retval The new state of __FLAG__ (TRUE or FALSE).
|
||||
*/
|
||||
#define __HAL_PWR_GET_FLAG(__FLAG__) ((PWR->CSR1 & (__FLAG__)) == (__FLAG__))
|
||||
|
||||
/** @brief Clear the PWR's pending flags.
|
||||
* @param __FLAG__ specifies the flag to clear.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg PWR_FLAG_SB: StandBy flag
|
||||
*/
|
||||
#define __HAL_PWR_CLEAR_FLAG(__FLAG__) (PWR->CR1 |= (__FLAG__) << 2)
|
||||
|
||||
/**
|
||||
* @brief Enable the PVD Exti Line 16.
|
||||
* @retval None.
|
||||
*/
|
||||
#define __HAL_PWR_PVD_EXTI_ENABLE_IT() (EXTI->IMR |= (PWR_EXTI_LINE_PVD))
|
||||
|
||||
/**
|
||||
* @brief Disable the PVD EXTI Line 16.
|
||||
* @retval None.
|
||||
*/
|
||||
#define __HAL_PWR_PVD_EXTI_DISABLE_IT() (EXTI->IMR &= ~(PWR_EXTI_LINE_PVD))
|
||||
|
||||
/**
|
||||
* @brief Enable event on PVD Exti Line 16.
|
||||
* @retval None.
|
||||
*/
|
||||
#define __HAL_PWR_PVD_EXTI_ENABLE_EVENT() (EXTI->EMR |= (PWR_EXTI_LINE_PVD))
|
||||
|
||||
/**
|
||||
* @brief Disable event on PVD Exti Line 16.
|
||||
* @retval None.
|
||||
*/
|
||||
#define __HAL_PWR_PVD_EXTI_DISABLE_EVENT() (EXTI->EMR &= ~(PWR_EXTI_LINE_PVD))
|
||||
|
||||
/**
|
||||
* @brief Enable the PVD Extended Interrupt Rising Trigger.
|
||||
* @retval None.
|
||||
*/
|
||||
#define __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE() SET_BIT(EXTI->RTSR, PWR_EXTI_LINE_PVD)
|
||||
|
||||
/**
|
||||
* @brief Disable the PVD Extended Interrupt Rising Trigger.
|
||||
* @retval None.
|
||||
*/
|
||||
#define __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE() CLEAR_BIT(EXTI->RTSR, PWR_EXTI_LINE_PVD)
|
||||
|
||||
/**
|
||||
* @brief Enable the PVD Extended Interrupt Falling Trigger.
|
||||
* @retval None.
|
||||
*/
|
||||
#define __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE() SET_BIT(EXTI->FTSR, PWR_EXTI_LINE_PVD)
|
||||
|
||||
|
||||
/**
|
||||
* @brief Disable the PVD Extended Interrupt Falling Trigger.
|
||||
* @retval None.
|
||||
*/
|
||||
#define __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE() CLEAR_BIT(EXTI->FTSR, PWR_EXTI_LINE_PVD)
|
||||
|
||||
|
||||
/**
|
||||
* @brief PVD EXTI line configuration: set rising & falling edge trigger.
|
||||
* @retval None.
|
||||
*/
|
||||
#define __HAL_PWR_PVD_EXTI_ENABLE_RISING_FALLING_EDGE() __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE();__HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE();
|
||||
|
||||
/**
|
||||
* @brief Disable the PVD Extended Interrupt Rising & Falling Trigger.
|
||||
* @retval None.
|
||||
*/
|
||||
#define __HAL_PWR_PVD_EXTI_DISABLE_RISING_FALLING_EDGE() __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE();__HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE();
|
||||
|
||||
/**
|
||||
* @brief checks whether the specified PVD Exti interrupt flag is set or not.
|
||||
* @retval EXTI PVD Line Status.
|
||||
*/
|
||||
#define __HAL_PWR_PVD_EXTI_GET_FLAG() (EXTI->PR & (PWR_EXTI_LINE_PVD))
|
||||
|
||||
/**
|
||||
* @brief Clear the PVD Exti flag.
|
||||
* @retval None.
|
||||
*/
|
||||
#define __HAL_PWR_PVD_EXTI_CLEAR_FLAG() (EXTI->PR = (PWR_EXTI_LINE_PVD))
|
||||
|
||||
/**
|
||||
* @brief Generates a Software interrupt on PVD EXTI line.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_PWR_PVD_EXTI_GENERATE_SWIT() (EXTI->SWIER |= (PWR_EXTI_LINE_PVD))
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Include PWR HAL Extension module */
|
||||
#include "stm32f7xx_hal_pwr_ex.h"
|
||||
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @addtogroup PWR_Exported_Functions PWR Exported Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup PWR_Exported_Functions_Group1 Initialization and de-initialization functions
|
||||
* @{
|
||||
*/
|
||||
/* Initialization and de-initialization functions *****************************/
|
||||
void HAL_PWR_DeInit(void);
|
||||
void HAL_PWR_EnableBkUpAccess(void);
|
||||
void HAL_PWR_DisableBkUpAccess(void);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup PWR_Exported_Functions_Group2 Peripheral Control functions
|
||||
* @{
|
||||
*/
|
||||
/* Peripheral Control functions **********************************************/
|
||||
/* PVD configuration */
|
||||
void HAL_PWR_ConfigPVD(PWR_PVDTypeDef *sConfigPVD);
|
||||
void HAL_PWR_EnablePVD(void);
|
||||
void HAL_PWR_DisablePVD(void);
|
||||
|
||||
/* WakeUp pins configuration */
|
||||
void HAL_PWR_EnableWakeUpPin(uint32_t WakeUpPinPolarity);
|
||||
void HAL_PWR_DisableWakeUpPin(uint32_t WakeUpPinx);
|
||||
|
||||
/* Low Power modes entry */
|
||||
void HAL_PWR_EnterSTOPMode(uint32_t Regulator, uint8_t STOPEntry);
|
||||
void HAL_PWR_EnterSLEEPMode(uint32_t Regulator, uint8_t SLEEPEntry);
|
||||
void HAL_PWR_EnterSTANDBYMode(void);
|
||||
|
||||
/* Power PVD IRQ Handler */
|
||||
void HAL_PWR_PVD_IRQHandler(void);
|
||||
void HAL_PWR_PVDCallback(void);
|
||||
|
||||
/* Cortex System Control functions *******************************************/
|
||||
void HAL_PWR_EnableSleepOnExit(void);
|
||||
void HAL_PWR_DisableSleepOnExit(void);
|
||||
void HAL_PWR_EnableSEVOnPend(void);
|
||||
void HAL_PWR_DisableSEVOnPend(void);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private types -------------------------------------------------------------*/
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
/* Private constants ---------------------------------------------------------*/
|
||||
/** @defgroup PWR_Private_Constants PWR Private Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup PWR_PVD_EXTI_Line PWR PVD EXTI Line
|
||||
* @{
|
||||
*/
|
||||
#define PWR_EXTI_LINE_PVD ((uint32_t)EXTI_IMR_IM16) /*!< External interrupt line 16 Connected to the PVD EXTI Line */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/* Private macros ------------------------------------------------------------*/
|
||||
/** @defgroup PWR_Private_Macros PWR Private Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup PWR_IS_PWR_Definitions PWR Private macros to check input parameters
|
||||
* @{
|
||||
*/
|
||||
#define IS_PWR_PVD_LEVEL(LEVEL) (((LEVEL) == PWR_PVDLEVEL_0) || ((LEVEL) == PWR_PVDLEVEL_1)|| \
|
||||
((LEVEL) == PWR_PVDLEVEL_2) || ((LEVEL) == PWR_PVDLEVEL_3)|| \
|
||||
((LEVEL) == PWR_PVDLEVEL_4) || ((LEVEL) == PWR_PVDLEVEL_5)|| \
|
||||
((LEVEL) == PWR_PVDLEVEL_6) || ((LEVEL) == PWR_PVDLEVEL_7))
|
||||
#define IS_PWR_PVD_MODE(MODE) (((MODE) == PWR_PVD_MODE_IT_RISING)|| ((MODE) == PWR_PVD_MODE_IT_FALLING) || \
|
||||
((MODE) == PWR_PVD_MODE_IT_RISING_FALLING) || ((MODE) == PWR_PVD_MODE_EVENT_RISING) || \
|
||||
((MODE) == PWR_PVD_MODE_EVENT_FALLING) || ((MODE) == PWR_PVD_MODE_EVENT_RISING_FALLING) || \
|
||||
((MODE) == PWR_PVD_MODE_NORMAL))
|
||||
#define IS_PWR_REGULATOR(REGULATOR) (((REGULATOR) == PWR_MAINREGULATOR_ON) || \
|
||||
((REGULATOR) == PWR_LOWPOWERREGULATOR_ON))
|
||||
#define IS_PWR_SLEEP_ENTRY(ENTRY) (((ENTRY) == PWR_SLEEPENTRY_WFI) || ((ENTRY) == PWR_SLEEPENTRY_WFE))
|
||||
#define IS_PWR_STOP_ENTRY(ENTRY) (((ENTRY) == PWR_STOPENTRY_WFI) || ((ENTRY) == PWR_STOPENTRY_WFE))
|
||||
#define IS_PWR_REGULATOR_VOLTAGE(VOLTAGE) (((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE1) || \
|
||||
((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE2) || \
|
||||
((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE3))
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
|
||||
#endif /* __STM32F7xx_HAL_PWR_H */
|
||||
|
||||
260
project/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_pwr_ex.h
Normal file
260
project/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_pwr_ex.h
Normal file
@@ -0,0 +1,260 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f7xx_hal_pwr_ex.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of PWR HAL Extension module.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __STM32F7xx_HAL_PWR_EX_H
|
||||
#define __STM32F7xx_HAL_PWR_EX_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f7xx_hal_def.h"
|
||||
|
||||
/** @addtogroup STM32F7xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup PWREx
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/** @defgroup PWREx_Exported_Constants PWREx Exported Constants
|
||||
* @{
|
||||
*/
|
||||
/** @defgroup PWREx_WakeUp_Pins PWREx Wake Up Pins
|
||||
* @{
|
||||
*/
|
||||
#define PWR_WAKEUP_PIN1 PWR_CSR2_EWUP1
|
||||
#define PWR_WAKEUP_PIN2 PWR_CSR2_EWUP2
|
||||
#define PWR_WAKEUP_PIN3 PWR_CSR2_EWUP3
|
||||
#define PWR_WAKEUP_PIN4 PWR_CSR2_EWUP4
|
||||
#define PWR_WAKEUP_PIN5 PWR_CSR2_EWUP5
|
||||
#define PWR_WAKEUP_PIN6 PWR_CSR2_EWUP6
|
||||
#define PWR_WAKEUP_PIN1_HIGH PWR_CSR2_EWUP1
|
||||
#define PWR_WAKEUP_PIN2_HIGH PWR_CSR2_EWUP2
|
||||
#define PWR_WAKEUP_PIN3_HIGH PWR_CSR2_EWUP3
|
||||
#define PWR_WAKEUP_PIN4_HIGH PWR_CSR2_EWUP4
|
||||
#define PWR_WAKEUP_PIN5_HIGH PWR_CSR2_EWUP5
|
||||
#define PWR_WAKEUP_PIN6_HIGH PWR_CSR2_EWUP6
|
||||
#define PWR_WAKEUP_PIN1_LOW (uint32_t)((PWR_CR2_WUPP1<<6) | PWR_CSR2_EWUP1)
|
||||
#define PWR_WAKEUP_PIN2_LOW (uint32_t)((PWR_CR2_WUPP2<<6) | PWR_CSR2_EWUP2)
|
||||
#define PWR_WAKEUP_PIN3_LOW (uint32_t)((PWR_CR2_WUPP3<<6) | PWR_CSR2_EWUP3)
|
||||
#define PWR_WAKEUP_PIN4_LOW (uint32_t)((PWR_CR2_WUPP4<<6) | PWR_CSR2_EWUP4)
|
||||
#define PWR_WAKEUP_PIN5_LOW (uint32_t)((PWR_CR2_WUPP5<<6) | PWR_CSR2_EWUP5)
|
||||
#define PWR_WAKEUP_PIN6_LOW (uint32_t)((PWR_CR2_WUPP6<<6) | PWR_CSR2_EWUP6)
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup PWREx_Regulator_state_in_UnderDrive_mode PWREx Regulator state in UnderDrive mode
|
||||
* @{
|
||||
*/
|
||||
#define PWR_MAINREGULATOR_UNDERDRIVE_ON PWR_CR1_MRUDS
|
||||
#define PWR_LOWPOWERREGULATOR_UNDERDRIVE_ON ((uint32_t)(PWR_CR1_LPDS | PWR_CR1_LPUDS))
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup PWREx_Over_Under_Drive_Flag PWREx Over Under Drive Flag
|
||||
* @{
|
||||
*/
|
||||
#define PWR_FLAG_ODRDY PWR_CSR1_ODRDY
|
||||
#define PWR_FLAG_ODSWRDY PWR_CSR1_ODSWRDY
|
||||
#define PWR_FLAG_UDRDY PWR_CSR1_UDRDY
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup PWREx_Wakeup_Pins_Flag PWREx Wake Up Pin Flags
|
||||
* @{
|
||||
*/
|
||||
#define PWR_WAKEUP_PIN_FLAG1 PWR_CSR2_WUPF1
|
||||
#define PWR_WAKEUP_PIN_FLAG2 PWR_CSR2_WUPF2
|
||||
#define PWR_WAKEUP_PIN_FLAG3 PWR_CSR2_WUPF3
|
||||
#define PWR_WAKEUP_PIN_FLAG4 PWR_CSR2_WUPF4
|
||||
#define PWR_WAKEUP_PIN_FLAG5 PWR_CSR2_WUPF5
|
||||
#define PWR_WAKEUP_PIN_FLAG6 PWR_CSR2_WUPF6
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/** @defgroup PWREx_Exported_Macro PWREx Exported Macro
|
||||
* @{
|
||||
*/
|
||||
/** @brief Macros to enable or disable the Over drive mode.
|
||||
*/
|
||||
#define __HAL_PWR_OVERDRIVE_ENABLE() (PWR->CR1 |= (uint32_t)PWR_CR1_ODEN)
|
||||
#define __HAL_PWR_OVERDRIVE_DISABLE() (PWR->CR1 &= (uint32_t)(~PWR_CR1_ODEN))
|
||||
|
||||
/** @brief Macros to enable or disable the Over drive switching.
|
||||
*/
|
||||
#define __HAL_PWR_OVERDRIVESWITCHING_ENABLE() (PWR->CR1 |= (uint32_t)PWR_CR1_ODSWEN)
|
||||
#define __HAL_PWR_OVERDRIVESWITCHING_DISABLE() (PWR->CR1 &= (uint32_t)(~PWR_CR1_ODSWEN))
|
||||
|
||||
/** @brief Macros to enable or disable the Under drive mode.
|
||||
* @note This mode is enabled only with STOP low power mode.
|
||||
* In this mode, the 1.2V domain is preserved in reduced leakage mode. This
|
||||
* mode is only available when the main regulator or the low power regulator
|
||||
* is in low voltage mode.
|
||||
* @note If the Under-drive mode was enabled, it is automatically disabled after
|
||||
* exiting Stop mode.
|
||||
* When the voltage regulator operates in Under-drive mode, an additional
|
||||
* startup delay is induced when waking up from Stop mode.
|
||||
*/
|
||||
#define __HAL_PWR_UNDERDRIVE_ENABLE() (PWR->CR1 |= (uint32_t)PWR_CR1_UDEN)
|
||||
#define __HAL_PWR_UNDERDRIVE_DISABLE() (PWR->CR1 &= (uint32_t)(~PWR_CR1_UDEN))
|
||||
|
||||
/** @brief Check PWR flag is set or not.
|
||||
* @param __FLAG__ specifies the flag to check.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg PWR_FLAG_ODRDY: This flag indicates that the Over-drive mode
|
||||
* is ready
|
||||
* @arg PWR_FLAG_ODSWRDY: This flag indicates that the Over-drive mode
|
||||
* switching is ready
|
||||
* @arg PWR_FLAG_UDRDY: This flag indicates that the Under-drive mode
|
||||
* is enabled in Stop mode
|
||||
* @retval The new state of __FLAG__ (TRUE or FALSE).
|
||||
*/
|
||||
#define __HAL_PWR_GET_ODRUDR_FLAG(__FLAG__) ((PWR->CSR1 & (__FLAG__)) == (__FLAG__))
|
||||
|
||||
/** @brief Clear the Under-Drive Ready flag.
|
||||
*/
|
||||
#define __HAL_PWR_CLEAR_ODRUDR_FLAG() (PWR->CSR1 |= (PWR_FLAG_UDRDY | PWR_CSR1_EIWUP))
|
||||
|
||||
/** @brief Check Wake Up flag is set or not.
|
||||
* @param __WUFLAG__ specifies the Wake Up flag to check.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg PWR_WAKEUP_PIN_FLAG1: Wakeup Pin Flag for PA0
|
||||
* @arg PWR_WAKEUP_PIN_FLAG2: Wakeup Pin Flag for PA2
|
||||
* @arg PWR_WAKEUP_PIN_FLAG3: Wakeup Pin Flag for PC1
|
||||
* @arg PWR_WAKEUP_PIN_FLAG4: Wakeup Pin Flag for PC13
|
||||
* @arg PWR_WAKEUP_PIN_FLAG5: Wakeup Pin Flag for PI8
|
||||
* @arg PWR_WAKEUP_PIN_FLAG6: Wakeup Pin Flag for PI11
|
||||
*/
|
||||
#define __HAL_PWR_GET_WAKEUP_FLAG(__WUFLAG__) (PWR->CSR2 & (__WUFLAG__))
|
||||
|
||||
/** @brief Clear the WakeUp pins flags.
|
||||
* @param __WUFLAG__ specifies the Wake Up pin flag to clear.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg PWR_WAKEUP_PIN_FLAG1: Wakeup Pin Flag for PA0
|
||||
* @arg PWR_WAKEUP_PIN_FLAG2: Wakeup Pin Flag for PA2
|
||||
* @arg PWR_WAKEUP_PIN_FLAG3: Wakeup Pin Flag for PC1
|
||||
* @arg PWR_WAKEUP_PIN_FLAG4: Wakeup Pin Flag for PC13
|
||||
* @arg PWR_WAKEUP_PIN_FLAG5: Wakeup Pin Flag for PI8
|
||||
* @arg PWR_WAKEUP_PIN_FLAG6: Wakeup Pin Flag for PI11
|
||||
*/
|
||||
#define __HAL_PWR_CLEAR_WAKEUP_FLAG(__WUFLAG__) (PWR->CR2 |= (__WUFLAG__))
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @addtogroup PWREx_Exported_Functions PWREx Exported Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup PWREx_Exported_Functions_Group1
|
||||
* @{
|
||||
*/
|
||||
uint32_t HAL_PWREx_GetVoltageRange(void);
|
||||
HAL_StatusTypeDef HAL_PWREx_ControlVoltageScaling(uint32_t VoltageScaling);
|
||||
|
||||
void HAL_PWREx_EnableFlashPowerDown(void);
|
||||
void HAL_PWREx_DisableFlashPowerDown(void);
|
||||
HAL_StatusTypeDef HAL_PWREx_EnableBkUpReg(void);
|
||||
HAL_StatusTypeDef HAL_PWREx_DisableBkUpReg(void);
|
||||
|
||||
void HAL_PWREx_EnableMainRegulatorLowVoltage(void);
|
||||
void HAL_PWREx_DisableMainRegulatorLowVoltage(void);
|
||||
void HAL_PWREx_EnableLowRegulatorLowVoltage(void);
|
||||
void HAL_PWREx_DisableLowRegulatorLowVoltage(void);
|
||||
|
||||
HAL_StatusTypeDef HAL_PWREx_EnableOverDrive(void);
|
||||
HAL_StatusTypeDef HAL_PWREx_DisableOverDrive(void);
|
||||
HAL_StatusTypeDef HAL_PWREx_EnterUnderDriveSTOPMode(uint32_t Regulator, uint8_t STOPEntry);
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/* Private types -------------------------------------------------------------*/
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
/* Private constants ---------------------------------------------------------*/
|
||||
/* Private macros ------------------------------------------------------------*/
|
||||
/** @defgroup PWREx_Private_Macros PWREx Private Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup PWREx_IS_PWR_Definitions PWREx Private macros to check input parameters
|
||||
* @{
|
||||
*/
|
||||
#define IS_PWR_REGULATOR_UNDERDRIVE(REGULATOR) (((REGULATOR) == PWR_MAINREGULATOR_UNDERDRIVE_ON) || \
|
||||
((REGULATOR) == PWR_LOWPOWERREGULATOR_UNDERDRIVE_ON))
|
||||
#define IS_PWR_WAKEUP_PIN(__PIN__) (((__PIN__) == PWR_WAKEUP_PIN1) || \
|
||||
((__PIN__) == PWR_WAKEUP_PIN2) || \
|
||||
((__PIN__) == PWR_WAKEUP_PIN3) || \
|
||||
((__PIN__) == PWR_WAKEUP_PIN4) || \
|
||||
((__PIN__) == PWR_WAKEUP_PIN5) || \
|
||||
((__PIN__) == PWR_WAKEUP_PIN6) || \
|
||||
((__PIN__) == PWR_WAKEUP_PIN1_HIGH) || \
|
||||
((__PIN__) == PWR_WAKEUP_PIN2_HIGH) || \
|
||||
((__PIN__) == PWR_WAKEUP_PIN3_HIGH) || \
|
||||
((__PIN__) == PWR_WAKEUP_PIN4_HIGH) || \
|
||||
((__PIN__) == PWR_WAKEUP_PIN5_HIGH) || \
|
||||
((__PIN__) == PWR_WAKEUP_PIN6_HIGH) || \
|
||||
((__PIN__) == PWR_WAKEUP_PIN1_LOW) || \
|
||||
((__PIN__) == PWR_WAKEUP_PIN2_LOW) || \
|
||||
((__PIN__) == PWR_WAKEUP_PIN3_LOW) || \
|
||||
((__PIN__) == PWR_WAKEUP_PIN4_LOW) || \
|
||||
((__PIN__) == PWR_WAKEUP_PIN5_LOW) || \
|
||||
((__PIN__) == PWR_WAKEUP_PIN6_LOW))
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
|
||||
#endif /* __STM32F7xx_HAL_PWR_EX_H */
|
||||
|
||||
1307
project/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_rcc.h
Normal file
1307
project/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_rcc.h
Normal file
File diff suppressed because it is too large
Load Diff
3521
project/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_rcc_ex.h
Normal file
3521
project/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_rcc_ex.h
Normal file
File diff suppressed because it is too large
Load Diff
236
project/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_sdram.h
Normal file
236
project/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_sdram.h
Normal file
@@ -0,0 +1,236 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f7xx_hal_sdram.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of SDRAM HAL module.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef STM32F7xx_HAL_SDRAM_H
|
||||
#define STM32F7xx_HAL_SDRAM_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f7xx_ll_fmc.h"
|
||||
|
||||
/** @addtogroup STM32F7xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup SDRAM
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Exported typedef ----------------------------------------------------------*/
|
||||
|
||||
/** @defgroup SDRAM_Exported_Types SDRAM Exported Types
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief HAL SDRAM State structure definition
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
HAL_SDRAM_STATE_RESET = 0x00U, /*!< SDRAM not yet initialized or disabled */
|
||||
HAL_SDRAM_STATE_READY = 0x01U, /*!< SDRAM initialized and ready for use */
|
||||
HAL_SDRAM_STATE_BUSY = 0x02U, /*!< SDRAM internal process is ongoing */
|
||||
HAL_SDRAM_STATE_ERROR = 0x03U, /*!< SDRAM error state */
|
||||
HAL_SDRAM_STATE_WRITE_PROTECTED = 0x04U, /*!< SDRAM device write protected */
|
||||
HAL_SDRAM_STATE_PRECHARGED = 0x05U /*!< SDRAM device precharged */
|
||||
|
||||
} HAL_SDRAM_StateTypeDef;
|
||||
|
||||
/**
|
||||
* @brief SDRAM handle Structure definition
|
||||
*/
|
||||
#if (USE_HAL_SDRAM_REGISTER_CALLBACKS == 1)
|
||||
typedef struct __SDRAM_HandleTypeDef
|
||||
#else
|
||||
typedef struct
|
||||
#endif /* USE_HAL_SDRAM_REGISTER_CALLBACKS */
|
||||
{
|
||||
FMC_SDRAM_TypeDef *Instance; /*!< Register base address */
|
||||
|
||||
FMC_SDRAM_InitTypeDef Init; /*!< SDRAM device configuration parameters */
|
||||
|
||||
__IO HAL_SDRAM_StateTypeDef State; /*!< SDRAM access state */
|
||||
|
||||
HAL_LockTypeDef Lock; /*!< SDRAM locking object */
|
||||
|
||||
DMA_HandleTypeDef *hdma; /*!< Pointer DMA handler */
|
||||
|
||||
#if (USE_HAL_SDRAM_REGISTER_CALLBACKS == 1)
|
||||
void (* MspInitCallback)(struct __SDRAM_HandleTypeDef *hsdram); /*!< SDRAM Msp Init callback */
|
||||
void (* MspDeInitCallback)(struct __SDRAM_HandleTypeDef *hsdram); /*!< SDRAM Msp DeInit callback */
|
||||
void (* RefreshErrorCallback)(struct __SDRAM_HandleTypeDef *hsdram); /*!< SDRAM Refresh Error callback */
|
||||
void (* DmaXferCpltCallback)(DMA_HandleTypeDef *hdma); /*!< SDRAM DMA Xfer Complete callback */
|
||||
void (* DmaXferErrorCallback)(DMA_HandleTypeDef *hdma); /*!< SDRAM DMA Xfer Error callback */
|
||||
#endif /* USE_HAL_SDRAM_REGISTER_CALLBACKS */
|
||||
} SDRAM_HandleTypeDef;
|
||||
|
||||
#if (USE_HAL_SDRAM_REGISTER_CALLBACKS == 1)
|
||||
/**
|
||||
* @brief HAL SDRAM Callback ID enumeration definition
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
HAL_SDRAM_MSP_INIT_CB_ID = 0x00U, /*!< SDRAM MspInit Callback ID */
|
||||
HAL_SDRAM_MSP_DEINIT_CB_ID = 0x01U, /*!< SDRAM MspDeInit Callback ID */
|
||||
HAL_SDRAM_REFRESH_ERR_CB_ID = 0x02U, /*!< SDRAM Refresh Error Callback ID */
|
||||
HAL_SDRAM_DMA_XFER_CPLT_CB_ID = 0x03U, /*!< SDRAM DMA Xfer Complete Callback ID */
|
||||
HAL_SDRAM_DMA_XFER_ERR_CB_ID = 0x04U /*!< SDRAM DMA Xfer Error Callback ID */
|
||||
} HAL_SDRAM_CallbackIDTypeDef;
|
||||
|
||||
/**
|
||||
* @brief HAL SDRAM Callback pointer definition
|
||||
*/
|
||||
typedef void (*pSDRAM_CallbackTypeDef)(SDRAM_HandleTypeDef *hsdram);
|
||||
typedef void (*pSDRAM_DmaCallbackTypeDef)(DMA_HandleTypeDef *hdma);
|
||||
#endif /* USE_HAL_SDRAM_REGISTER_CALLBACKS */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
|
||||
/** @defgroup SDRAM_Exported_Macros SDRAM Exported Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @brief Reset SDRAM handle state
|
||||
* @param __HANDLE__ specifies the SDRAM handle.
|
||||
* @retval None
|
||||
*/
|
||||
#if (USE_HAL_SDRAM_REGISTER_CALLBACKS == 1)
|
||||
#define __HAL_SDRAM_RESET_HANDLE_STATE(__HANDLE__) do { \
|
||||
(__HANDLE__)->State = HAL_SDRAM_STATE_RESET; \
|
||||
(__HANDLE__)->MspInitCallback = NULL; \
|
||||
(__HANDLE__)->MspDeInitCallback = NULL; \
|
||||
} while(0)
|
||||
#else
|
||||
#define __HAL_SDRAM_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SDRAM_STATE_RESET)
|
||||
#endif /* USE_HAL_SDRAM_REGISTER_CALLBACKS */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
|
||||
/** @addtogroup SDRAM_Exported_Functions SDRAM Exported Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup SDRAM_Exported_Functions_Group1
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Initialization/de-initialization functions *********************************/
|
||||
HAL_StatusTypeDef HAL_SDRAM_Init(SDRAM_HandleTypeDef *hsdram, FMC_SDRAM_TimingTypeDef *Timing);
|
||||
HAL_StatusTypeDef HAL_SDRAM_DeInit(SDRAM_HandleTypeDef *hsdram);
|
||||
void HAL_SDRAM_MspInit(SDRAM_HandleTypeDef *hsdram);
|
||||
void HAL_SDRAM_MspDeInit(SDRAM_HandleTypeDef *hsdram);
|
||||
|
||||
void HAL_SDRAM_IRQHandler(SDRAM_HandleTypeDef *hsdram);
|
||||
void HAL_SDRAM_RefreshErrorCallback(SDRAM_HandleTypeDef *hsdram);
|
||||
void HAL_SDRAM_DMA_XferCpltCallback(DMA_HandleTypeDef *hdma);
|
||||
void HAL_SDRAM_DMA_XferErrorCallback(DMA_HandleTypeDef *hdma);
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup SDRAM_Exported_Functions_Group2
|
||||
* @{
|
||||
*/
|
||||
/* I/O operation functions ****************************************************/
|
||||
HAL_StatusTypeDef HAL_SDRAM_Read_8b(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint8_t *pDstBuffer,
|
||||
uint32_t BufferSize);
|
||||
HAL_StatusTypeDef HAL_SDRAM_Write_8b(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint8_t *pSrcBuffer,
|
||||
uint32_t BufferSize);
|
||||
HAL_StatusTypeDef HAL_SDRAM_Read_16b(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint16_t *pDstBuffer,
|
||||
uint32_t BufferSize);
|
||||
HAL_StatusTypeDef HAL_SDRAM_Write_16b(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint16_t *pSrcBuffer,
|
||||
uint32_t BufferSize);
|
||||
HAL_StatusTypeDef HAL_SDRAM_Read_32b(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint32_t *pDstBuffer,
|
||||
uint32_t BufferSize);
|
||||
HAL_StatusTypeDef HAL_SDRAM_Write_32b(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint32_t *pSrcBuffer,
|
||||
uint32_t BufferSize);
|
||||
|
||||
HAL_StatusTypeDef HAL_SDRAM_Read_DMA(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint32_t *pDstBuffer,
|
||||
uint32_t BufferSize);
|
||||
HAL_StatusTypeDef HAL_SDRAM_Write_DMA(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint32_t *pSrcBuffer,
|
||||
uint32_t BufferSize);
|
||||
|
||||
#if (USE_HAL_SDRAM_REGISTER_CALLBACKS == 1)
|
||||
/* SDRAM callback registering/unregistering */
|
||||
HAL_StatusTypeDef HAL_SDRAM_RegisterCallback(SDRAM_HandleTypeDef *hsdram, HAL_SDRAM_CallbackIDTypeDef CallbackId,
|
||||
pSDRAM_CallbackTypeDef pCallback);
|
||||
HAL_StatusTypeDef HAL_SDRAM_UnRegisterCallback(SDRAM_HandleTypeDef *hsdram, HAL_SDRAM_CallbackIDTypeDef CallbackId);
|
||||
HAL_StatusTypeDef HAL_SDRAM_RegisterDmaCallback(SDRAM_HandleTypeDef *hsdram, HAL_SDRAM_CallbackIDTypeDef CallbackId,
|
||||
pSDRAM_DmaCallbackTypeDef pCallback);
|
||||
#endif /* USE_HAL_SDRAM_REGISTER_CALLBACKS */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup SDRAM_Exported_Functions_Group3
|
||||
* @{
|
||||
*/
|
||||
/* SDRAM Control functions *****************************************************/
|
||||
HAL_StatusTypeDef HAL_SDRAM_WriteProtection_Enable(SDRAM_HandleTypeDef *hsdram);
|
||||
HAL_StatusTypeDef HAL_SDRAM_WriteProtection_Disable(SDRAM_HandleTypeDef *hsdram);
|
||||
HAL_StatusTypeDef HAL_SDRAM_SendCommand(SDRAM_HandleTypeDef *hsdram, FMC_SDRAM_CommandTypeDef *Command,
|
||||
uint32_t Timeout);
|
||||
HAL_StatusTypeDef HAL_SDRAM_ProgramRefreshRate(SDRAM_HandleTypeDef *hsdram, uint32_t RefreshRate);
|
||||
HAL_StatusTypeDef HAL_SDRAM_SetAutoRefreshNumber(SDRAM_HandleTypeDef *hsdram, uint32_t AutoRefreshNumber);
|
||||
uint32_t HAL_SDRAM_GetModeStatus(SDRAM_HandleTypeDef *hsdram);
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup SDRAM_Exported_Functions_Group4
|
||||
* @{
|
||||
*/
|
||||
/* SDRAM State functions ********************************************************/
|
||||
HAL_SDRAM_StateTypeDef HAL_SDRAM_GetState(SDRAM_HandleTypeDef *hsdram);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* STM32F7xx_HAL_SDRAM_H */
|
||||
2415
project/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_tim.h
Normal file
2415
project/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_tim.h
Normal file
File diff suppressed because it is too large
Load Diff
360
project/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_tim_ex.h
Normal file
360
project/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_tim_ex.h
Normal file
@@ -0,0 +1,360 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f7xx_hal_tim_ex.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of TIM HAL Extended module.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef STM32F7xx_HAL_TIM_EX_H
|
||||
#define STM32F7xx_HAL_TIM_EX_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f7xx_hal_def.h"
|
||||
|
||||
/** @addtogroup STM32F7xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup TIMEx
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/** @defgroup TIMEx_Exported_Types TIM Extended Exported Types
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief TIM Hall sensor Configuration Structure definition
|
||||
*/
|
||||
|
||||
typedef struct
|
||||
{
|
||||
uint32_t IC1Polarity; /*!< Specifies the active edge of the input signal.
|
||||
This parameter can be a value of @ref TIM_Input_Capture_Polarity */
|
||||
|
||||
uint32_t IC1Prescaler; /*!< Specifies the Input Capture Prescaler.
|
||||
This parameter can be a value of @ref TIM_Input_Capture_Prescaler */
|
||||
|
||||
uint32_t IC1Filter; /*!< Specifies the input capture filter.
|
||||
This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
|
||||
|
||||
uint32_t Commutation_Delay; /*!< Specifies the pulse value to be loaded into the Capture Compare Register.
|
||||
This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */
|
||||
} TIM_HallSensor_InitTypeDef;
|
||||
#if defined(TIM_BREAK_INPUT_SUPPORT)
|
||||
|
||||
/**
|
||||
* @brief TIM Break/Break2 input configuration
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint32_t Source; /*!< Specifies the source of the timer break input.
|
||||
This parameter can be a value of @ref TIMEx_Break_Input_Source */
|
||||
uint32_t Enable; /*!< Specifies whether or not the break input source is enabled.
|
||||
This parameter can be a value of @ref TIMEx_Break_Input_Source_Enable */
|
||||
uint32_t Polarity; /*!< Specifies the break input source polarity.
|
||||
This parameter can be a value of @ref TIMEx_Break_Input_Source_Polarity
|
||||
Not relevant when analog watchdog output of the DFSDM1 used as break input source */
|
||||
} TIMEx_BreakInputConfigTypeDef;
|
||||
|
||||
#endif /* TIM_BREAK_INPUT_SUPPORT */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/* End of exported types -----------------------------------------------------*/
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/** @defgroup TIMEx_Exported_Constants TIM Extended Exported Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup TIMEx_Remap TIM Extended Remapping
|
||||
* @{
|
||||
*/
|
||||
#define TIM_TIM2_TIM8_TRGO (0x00000000U)
|
||||
#define TIM_TIM2_ETH_PTP (0x00000400U)
|
||||
#define TIM_TIM2_USBFS_SOF (0x00000800U)
|
||||
#define TIM_TIM2_USBHS_SOF (0x00000C00U)
|
||||
#define TIM_TIM5_GPIO (0x00000000U)
|
||||
#define TIM_TIM5_LSI (0x00000040U)
|
||||
#define TIM_TIM5_LSE (0x00000080U)
|
||||
#define TIM_TIM5_RTC (0x000000C0U)
|
||||
#define TIM_TIM11_GPIO (0x00000000U)
|
||||
#define TIM_TIM11_SPDIFRX (0x00000001U)
|
||||
#define TIM_TIM11_HSE (0x00000002U)
|
||||
#define TIM_TIM11_MCO1 (0x00000003U)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
#if defined(TIM_BREAK_INPUT_SUPPORT)
|
||||
|
||||
/** @defgroup TIMEx_Break_Input TIM Extended Break input
|
||||
* @{
|
||||
*/
|
||||
#define TIM_BREAKINPUT_BRK 0x00000001U /*!< Timer break input */
|
||||
#define TIM_BREAKINPUT_BRK2 0x00000002U /*!< Timer break2 input */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup TIMEx_Break_Input_Source TIM Extended Break input source
|
||||
* @{
|
||||
*/
|
||||
#define TIM_BREAKINPUTSOURCE_BKIN (0x00000001U) /* !< An external source (GPIO) is connected to the BKIN pin */
|
||||
#define TIM_BREAKINPUTSOURCE_DFSDM1 (0x00000008U) /* !< The analog watchdog output of the DFSDM1 peripheral is connected to the break input */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup TIMEx_Break_Input_Source_Enable TIM Extended Break input source enabling
|
||||
* @{
|
||||
*/
|
||||
#define TIM_BREAKINPUTSOURCE_DISABLE 0x00000000U /*!< Break input source is disabled */
|
||||
#define TIM_BREAKINPUTSOURCE_ENABLE 0x00000001U /*!< Break input source is enabled */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup TIMEx_Break_Input_Source_Polarity TIM Extended Break input polarity
|
||||
* @{
|
||||
*/
|
||||
#define TIM_BREAKINPUTSOURCE_POLARITY_LOW 0x00000001U /*!< Break input source is active low */
|
||||
#define TIM_BREAKINPUTSOURCE_POLARITY_HIGH 0x00000000U /*!< Break input source is active_high */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
#endif /* TIM_BREAK_INPUT_SUPPORT */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/* End of exported constants -------------------------------------------------*/
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/** @defgroup TIMEx_Exported_Macros TIM Extended Exported Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/* End of exported macro -----------------------------------------------------*/
|
||||
|
||||
/* Private macro -------------------------------------------------------------*/
|
||||
/** @defgroup TIMEx_Private_Macros TIM Extended Private Macros
|
||||
* @{
|
||||
*/
|
||||
#define IS_TIM_REMAP(__TIM_REMAP__) (((__TIM_REMAP__) == TIM_TIM2_TIM8_TRGO)||\
|
||||
((__TIM_REMAP__) == TIM_TIM2_ETH_PTP) ||\
|
||||
((__TIM_REMAP__) == TIM_TIM2_USBFS_SOF)||\
|
||||
((__TIM_REMAP__) == TIM_TIM2_USBHS_SOF)||\
|
||||
((__TIM_REMAP__) == TIM_TIM5_GPIO) ||\
|
||||
((__TIM_REMAP__) == TIM_TIM5_LSI) ||\
|
||||
((__TIM_REMAP__) == TIM_TIM5_LSE) ||\
|
||||
((__TIM_REMAP__) == TIM_TIM5_RTC) ||\
|
||||
((__TIM_REMAP__) == TIM_TIM11_GPIO) ||\
|
||||
((__TIM_REMAP__) == TIM_TIM11_SPDIFRX) ||\
|
||||
((__TIM_REMAP__) == TIM_TIM11_HSE) ||\
|
||||
((__TIM_REMAP__) == TIM_TIM11_MCO1))
|
||||
#if defined(TIM_BREAK_INPUT_SUPPORT)
|
||||
|
||||
#define IS_TIM_BREAKINPUT(__BREAKINPUT__) (((__BREAKINPUT__) == TIM_BREAKINPUT_BRK) || \
|
||||
((__BREAKINPUT__) == TIM_BREAKINPUT_BRK2))
|
||||
|
||||
#define IS_TIM_BREAKINPUTSOURCE(__SOURCE__) (((__SOURCE__) == TIM_BREAKINPUTSOURCE_BKIN) || \
|
||||
((__SOURCE__) == TIM_BREAKINPUTSOURCE_DFSDM))
|
||||
|
||||
#define IS_TIM_BREAKINPUTSOURCE_STATE(__STATE__) (((__STATE__) == TIM_BREAKINPUTSOURCE_DISABLE) || \
|
||||
((__STATE__) == TIM_BREAKINPUTSOURCE_ENABLE))
|
||||
|
||||
#define IS_TIM_BREAKINPUTSOURCE_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_BREAKINPUTSOURCE_POLARITY_LOW) || \
|
||||
((__POLARITY__) == TIM_BREAKINPUTSOURCE_POLARITY_HIGH))
|
||||
#endif /* TIM_BREAK_INPUT_SUPPORT */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/* End of private macro ------------------------------------------------------*/
|
||||
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @addtogroup TIMEx_Exported_Functions TIM Extended Exported Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup TIMEx_Exported_Functions_Group1 Extended Timer Hall Sensor functions
|
||||
* @brief Timer Hall Sensor functions
|
||||
* @{
|
||||
*/
|
||||
/* Timer Hall Sensor functions **********************************************/
|
||||
HAL_StatusTypeDef HAL_TIMEx_HallSensor_Init(TIM_HandleTypeDef *htim, const TIM_HallSensor_InitTypeDef *sConfig);
|
||||
HAL_StatusTypeDef HAL_TIMEx_HallSensor_DeInit(TIM_HandleTypeDef *htim);
|
||||
|
||||
void HAL_TIMEx_HallSensor_MspInit(TIM_HandleTypeDef *htim);
|
||||
void HAL_TIMEx_HallSensor_MspDeInit(TIM_HandleTypeDef *htim);
|
||||
|
||||
/* Blocking mode: Polling */
|
||||
HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start(TIM_HandleTypeDef *htim);
|
||||
HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop(TIM_HandleTypeDef *htim);
|
||||
/* Non-Blocking mode: Interrupt */
|
||||
HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_IT(TIM_HandleTypeDef *htim);
|
||||
HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_IT(TIM_HandleTypeDef *htim);
|
||||
/* Non-Blocking mode: DMA */
|
||||
HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length);
|
||||
HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_DMA(TIM_HandleTypeDef *htim);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup TIMEx_Exported_Functions_Group2 Extended Timer Complementary Output Compare functions
|
||||
* @brief Timer Complementary Output Compare functions
|
||||
* @{
|
||||
*/
|
||||
/* Timer Complementary Output Compare functions *****************************/
|
||||
/* Blocking mode: Polling */
|
||||
HAL_StatusTypeDef HAL_TIMEx_OCN_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
|
||||
HAL_StatusTypeDef HAL_TIMEx_OCN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
|
||||
|
||||
/* Non-Blocking mode: Interrupt */
|
||||
HAL_StatusTypeDef HAL_TIMEx_OCN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
|
||||
HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
|
||||
|
||||
/* Non-Blocking mode: DMA */
|
||||
HAL_StatusTypeDef HAL_TIMEx_OCN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, const uint32_t *pData,
|
||||
uint16_t Length);
|
||||
HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup TIMEx_Exported_Functions_Group3 Extended Timer Complementary PWM functions
|
||||
* @brief Timer Complementary PWM functions
|
||||
* @{
|
||||
*/
|
||||
/* Timer Complementary PWM functions ****************************************/
|
||||
/* Blocking mode: Polling */
|
||||
HAL_StatusTypeDef HAL_TIMEx_PWMN_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
|
||||
HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
|
||||
|
||||
/* Non-Blocking mode: Interrupt */
|
||||
HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
|
||||
HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
|
||||
/* Non-Blocking mode: DMA */
|
||||
HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, const uint32_t *pData,
|
||||
uint16_t Length);
|
||||
HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup TIMEx_Exported_Functions_Group4 Extended Timer Complementary One Pulse functions
|
||||
* @brief Timer Complementary One Pulse functions
|
||||
* @{
|
||||
*/
|
||||
/* Timer Complementary One Pulse functions **********************************/
|
||||
/* Blocking mode: Polling */
|
||||
HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
|
||||
HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
|
||||
|
||||
/* Non-Blocking mode: Interrupt */
|
||||
HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
|
||||
HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup TIMEx_Exported_Functions_Group5 Extended Peripheral Control functions
|
||||
* @brief Peripheral Control functions
|
||||
* @{
|
||||
*/
|
||||
/* Extended Control functions ************************************************/
|
||||
HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent(TIM_HandleTypeDef *htim, uint32_t InputTrigger,
|
||||
uint32_t CommutationSource);
|
||||
HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent_IT(TIM_HandleTypeDef *htim, uint32_t InputTrigger,
|
||||
uint32_t CommutationSource);
|
||||
HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent_DMA(TIM_HandleTypeDef *htim, uint32_t InputTrigger,
|
||||
uint32_t CommutationSource);
|
||||
HAL_StatusTypeDef HAL_TIMEx_MasterConfigSynchronization(TIM_HandleTypeDef *htim,
|
||||
const TIM_MasterConfigTypeDef *sMasterConfig);
|
||||
HAL_StatusTypeDef HAL_TIMEx_ConfigBreakDeadTime(TIM_HandleTypeDef *htim,
|
||||
const TIM_BreakDeadTimeConfigTypeDef *sBreakDeadTimeConfig);
|
||||
#if defined(TIM_BREAK_INPUT_SUPPORT)
|
||||
HAL_StatusTypeDef HAL_TIMEx_ConfigBreakInput(TIM_HandleTypeDef *htim, uint32_t BreakInput,
|
||||
const TIMEx_BreakInputConfigTypeDef *sBreakInputConfig);
|
||||
#endif /* TIM_BREAK_INPUT_SUPPORT */
|
||||
HAL_StatusTypeDef HAL_TIMEx_GroupChannel5(TIM_HandleTypeDef *htim, uint32_t Channels);
|
||||
HAL_StatusTypeDef HAL_TIMEx_RemapConfig(TIM_HandleTypeDef *htim, uint32_t Remap);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup TIMEx_Exported_Functions_Group6 Extended Callbacks functions
|
||||
* @brief Extended Callbacks functions
|
||||
* @{
|
||||
*/
|
||||
/* Extended Callback **********************************************************/
|
||||
void HAL_TIMEx_CommutCallback(TIM_HandleTypeDef *htim);
|
||||
void HAL_TIMEx_CommutHalfCpltCallback(TIM_HandleTypeDef *htim);
|
||||
void HAL_TIMEx_BreakCallback(TIM_HandleTypeDef *htim);
|
||||
void HAL_TIMEx_Break2Callback(TIM_HandleTypeDef *htim);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup TIMEx_Exported_Functions_Group7 Extended Peripheral State functions
|
||||
* @brief Extended Peripheral State functions
|
||||
* @{
|
||||
*/
|
||||
/* Extended Peripheral State functions ***************************************/
|
||||
HAL_TIM_StateTypeDef HAL_TIMEx_HallSensor_GetState(const TIM_HandleTypeDef *htim);
|
||||
HAL_TIM_ChannelStateTypeDef HAL_TIMEx_GetChannelNState(const TIM_HandleTypeDef *htim, uint32_t ChannelN);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/* End of exported functions -------------------------------------------------*/
|
||||
|
||||
/* Private functions----------------------------------------------------------*/
|
||||
/** @addtogroup TIMEx_Private_Functions TIM Extended Private Functions
|
||||
* @{
|
||||
*/
|
||||
void TIMEx_DMACommutationCplt(DMA_HandleTypeDef *hdma);
|
||||
void TIMEx_DMACommutationHalfCplt(DMA_HandleTypeDef *hdma);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/* End of private functions --------------------------------------------------*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
|
||||
#endif /* STM32F7xx_HAL_TIM_EX_H */
|
||||
1655
project/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_uart.h
Normal file
1655
project/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_uart.h
Normal file
File diff suppressed because it is too large
Load Diff
430
project/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_uart_ex.h
Normal file
430
project/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_uart_ex.h
Normal file
@@ -0,0 +1,430 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f7xx_hal_uart_ex.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of UART HAL Extended module.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef STM32F7xx_HAL_UART_EX_H
|
||||
#define STM32F7xx_HAL_UART_EX_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f7xx_hal_def.h"
|
||||
|
||||
/** @addtogroup STM32F7xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup UARTEx
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/** @defgroup UARTEx_Exported_Types UARTEx Exported Types
|
||||
* @{
|
||||
*/
|
||||
|
||||
#if defined(USART_CR1_UESM)
|
||||
/**
|
||||
* @brief UART wake up from stop mode parameters
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint32_t WakeUpEvent; /*!< Specifies which event will activate the Wakeup from Stop mode flag (WUF).
|
||||
This parameter can be a value of @ref UART_WakeUp_from_Stop_Selection.
|
||||
If set to UART_WAKEUP_ON_ADDRESS, the two other fields below must
|
||||
be filled up. */
|
||||
|
||||
uint16_t AddressLength; /*!< Specifies whether the address is 4 or 7-bit long.
|
||||
This parameter can be a value of @ref UARTEx_WakeUp_Address_Length. */
|
||||
|
||||
uint8_t Address; /*!< UART/USART node address (7-bit long max). */
|
||||
} UART_WakeUpTypeDef;
|
||||
|
||||
#endif /* USART_CR1_UESM */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/** @defgroup UARTEx_Exported_Constants UARTEx Exported Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup UARTEx_Word_Length UARTEx Word Length
|
||||
* @{
|
||||
*/
|
||||
#define UART_WORDLENGTH_7B USART_CR1_M1 /*!< 7-bit long UART frame */
|
||||
#define UART_WORDLENGTH_8B 0x00000000U /*!< 8-bit long UART frame */
|
||||
#define UART_WORDLENGTH_9B USART_CR1_M0 /*!< 9-bit long UART frame */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup UARTEx_WakeUp_Address_Length UARTEx WakeUp Address Length
|
||||
* @{
|
||||
*/
|
||||
#define UART_ADDRESS_DETECT_4B 0x00000000U /*!< 4-bit long wake-up address */
|
||||
#define UART_ADDRESS_DETECT_7B USART_CR2_ADDM7 /*!< 7-bit long wake-up address */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported macros -----------------------------------------------------------*/
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @addtogroup UARTEx_Exported_Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup UARTEx_Exported_Functions_Group1
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Initialization and de-initialization functions ****************************/
|
||||
HAL_StatusTypeDef HAL_RS485Ex_Init(UART_HandleTypeDef *huart, uint32_t Polarity, uint32_t AssertionTime,
|
||||
uint32_t DeassertionTime);
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup UARTEx_Exported_Functions_Group2
|
||||
* @{
|
||||
*/
|
||||
|
||||
#if defined(USART_CR1_UESM)
|
||||
void HAL_UARTEx_WakeupCallback(UART_HandleTypeDef *huart);
|
||||
|
||||
#endif /* USART_CR1_UESM */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup UARTEx_Exported_Functions_Group3
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Peripheral Control functions **********************************************/
|
||||
#if defined(USART_CR1_UESM)
|
||||
HAL_StatusTypeDef HAL_UARTEx_StopModeWakeUpSourceConfig(UART_HandleTypeDef *huart, UART_WakeUpTypeDef WakeUpSelection);
|
||||
HAL_StatusTypeDef HAL_UARTEx_EnableStopMode(UART_HandleTypeDef *huart);
|
||||
HAL_StatusTypeDef HAL_UARTEx_DisableStopMode(UART_HandleTypeDef *huart);
|
||||
|
||||
#endif /* USART_CR1_UESM */
|
||||
#if defined(USART_CR3_UCESM)
|
||||
HAL_StatusTypeDef HAL_UARTEx_EnableClockStopMode(UART_HandleTypeDef *huart);
|
||||
HAL_StatusTypeDef HAL_UARTEx_DisableClockStopMode(UART_HandleTypeDef *huart);
|
||||
|
||||
#endif /* USART_CR3_UCESM */
|
||||
HAL_StatusTypeDef HAL_MultiProcessorEx_AddressLength_Set(UART_HandleTypeDef *huart, uint32_t AddressLength);
|
||||
|
||||
|
||||
HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint16_t *RxLen,
|
||||
uint32_t Timeout);
|
||||
HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
|
||||
HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
|
||||
|
||||
HAL_UART_RxEventTypeTypeDef HAL_UARTEx_GetRxEventType(UART_HandleTypeDef *huart);
|
||||
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private macros ------------------------------------------------------------*/
|
||||
/** @defgroup UARTEx_Private_Macros UARTEx Private Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @brief Report the UART clock source.
|
||||
* @param __HANDLE__ specifies the UART Handle.
|
||||
* @param __CLOCKSOURCE__ output variable.
|
||||
* @retval UART clocking source, written in __CLOCKSOURCE__.
|
||||
*/
|
||||
#define UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
|
||||
do { \
|
||||
if((__HANDLE__)->Instance == USART1) \
|
||||
{ \
|
||||
switch(__HAL_RCC_GET_USART1_SOURCE()) \
|
||||
{ \
|
||||
case RCC_USART1CLKSOURCE_PCLK2: \
|
||||
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK2; \
|
||||
break; \
|
||||
case RCC_USART1CLKSOURCE_HSI: \
|
||||
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
|
||||
break; \
|
||||
case RCC_USART1CLKSOURCE_SYSCLK: \
|
||||
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \
|
||||
break; \
|
||||
case RCC_USART1CLKSOURCE_LSE: \
|
||||
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
|
||||
break; \
|
||||
default: \
|
||||
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
|
||||
break; \
|
||||
} \
|
||||
} \
|
||||
else if((__HANDLE__)->Instance == USART2) \
|
||||
{ \
|
||||
switch(__HAL_RCC_GET_USART2_SOURCE()) \
|
||||
{ \
|
||||
case RCC_USART2CLKSOURCE_PCLK1: \
|
||||
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
|
||||
break; \
|
||||
case RCC_USART2CLKSOURCE_HSI: \
|
||||
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
|
||||
break; \
|
||||
case RCC_USART2CLKSOURCE_SYSCLK: \
|
||||
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \
|
||||
break; \
|
||||
case RCC_USART2CLKSOURCE_LSE: \
|
||||
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
|
||||
break; \
|
||||
default: \
|
||||
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
|
||||
break; \
|
||||
} \
|
||||
} \
|
||||
else if((__HANDLE__)->Instance == USART3) \
|
||||
{ \
|
||||
switch(__HAL_RCC_GET_USART3_SOURCE()) \
|
||||
{ \
|
||||
case RCC_USART3CLKSOURCE_PCLK1: \
|
||||
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
|
||||
break; \
|
||||
case RCC_USART3CLKSOURCE_HSI: \
|
||||
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
|
||||
break; \
|
||||
case RCC_USART3CLKSOURCE_SYSCLK: \
|
||||
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \
|
||||
break; \
|
||||
case RCC_USART3CLKSOURCE_LSE: \
|
||||
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
|
||||
break; \
|
||||
default: \
|
||||
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
|
||||
break; \
|
||||
} \
|
||||
} \
|
||||
else if((__HANDLE__)->Instance == UART4) \
|
||||
{ \
|
||||
switch(__HAL_RCC_GET_UART4_SOURCE()) \
|
||||
{ \
|
||||
case RCC_UART4CLKSOURCE_PCLK1: \
|
||||
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
|
||||
break; \
|
||||
case RCC_UART4CLKSOURCE_HSI: \
|
||||
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
|
||||
break; \
|
||||
case RCC_UART4CLKSOURCE_SYSCLK: \
|
||||
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \
|
||||
break; \
|
||||
case RCC_UART4CLKSOURCE_LSE: \
|
||||
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
|
||||
break; \
|
||||
default: \
|
||||
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
|
||||
break; \
|
||||
} \
|
||||
} \
|
||||
else if ((__HANDLE__)->Instance == UART5) \
|
||||
{ \
|
||||
switch(__HAL_RCC_GET_UART5_SOURCE()) \
|
||||
{ \
|
||||
case RCC_UART5CLKSOURCE_PCLK1: \
|
||||
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
|
||||
break; \
|
||||
case RCC_UART5CLKSOURCE_HSI: \
|
||||
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
|
||||
break; \
|
||||
case RCC_UART5CLKSOURCE_SYSCLK: \
|
||||
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \
|
||||
break; \
|
||||
case RCC_UART5CLKSOURCE_LSE: \
|
||||
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
|
||||
break; \
|
||||
default: \
|
||||
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
|
||||
break; \
|
||||
} \
|
||||
} \
|
||||
else if((__HANDLE__)->Instance == USART6) \
|
||||
{ \
|
||||
switch(__HAL_RCC_GET_USART6_SOURCE()) \
|
||||
{ \
|
||||
case RCC_USART6CLKSOURCE_PCLK2: \
|
||||
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK2; \
|
||||
break; \
|
||||
case RCC_USART6CLKSOURCE_HSI: \
|
||||
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
|
||||
break; \
|
||||
case RCC_USART6CLKSOURCE_SYSCLK: \
|
||||
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \
|
||||
break; \
|
||||
case RCC_USART6CLKSOURCE_LSE: \
|
||||
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
|
||||
break; \
|
||||
default: \
|
||||
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
|
||||
break; \
|
||||
} \
|
||||
} \
|
||||
else if ((__HANDLE__)->Instance == UART7) \
|
||||
{ \
|
||||
switch(__HAL_RCC_GET_UART7_SOURCE()) \
|
||||
{ \
|
||||
case RCC_UART7CLKSOURCE_PCLK1: \
|
||||
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
|
||||
break; \
|
||||
case RCC_UART7CLKSOURCE_HSI: \
|
||||
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
|
||||
break; \
|
||||
case RCC_UART7CLKSOURCE_SYSCLK: \
|
||||
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \
|
||||
break; \
|
||||
case RCC_UART7CLKSOURCE_LSE: \
|
||||
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
|
||||
break; \
|
||||
default: \
|
||||
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
|
||||
break; \
|
||||
} \
|
||||
} \
|
||||
else if ((__HANDLE__)->Instance == UART8) \
|
||||
{ \
|
||||
switch(__HAL_RCC_GET_UART8_SOURCE()) \
|
||||
{ \
|
||||
case RCC_UART8CLKSOURCE_PCLK1: \
|
||||
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
|
||||
break; \
|
||||
case RCC_UART8CLKSOURCE_HSI: \
|
||||
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
|
||||
break; \
|
||||
case RCC_UART8CLKSOURCE_SYSCLK: \
|
||||
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \
|
||||
break; \
|
||||
case RCC_UART8CLKSOURCE_LSE: \
|
||||
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
|
||||
break; \
|
||||
default: \
|
||||
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
|
||||
break; \
|
||||
} \
|
||||
} \
|
||||
else \
|
||||
{ \
|
||||
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
|
||||
} \
|
||||
} while(0U)
|
||||
|
||||
/** @brief Report the UART mask to apply to retrieve the received data
|
||||
* according to the word length and to the parity bits activation.
|
||||
* @note If PCE = 1, the parity bit is not included in the data extracted
|
||||
* by the reception API().
|
||||
* This masking operation is not carried out in the case of
|
||||
* DMA transfers.
|
||||
* @param __HANDLE__ specifies the UART Handle.
|
||||
* @retval None, the mask to apply to UART RDR register is stored in (__HANDLE__)->Mask field.
|
||||
*/
|
||||
#define UART_MASK_COMPUTATION(__HANDLE__) \
|
||||
do { \
|
||||
if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_9B) \
|
||||
{ \
|
||||
if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \
|
||||
{ \
|
||||
(__HANDLE__)->Mask = 0x01FFU ; \
|
||||
} \
|
||||
else \
|
||||
{ \
|
||||
(__HANDLE__)->Mask = 0x00FFU ; \
|
||||
} \
|
||||
} \
|
||||
else if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_8B) \
|
||||
{ \
|
||||
if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \
|
||||
{ \
|
||||
(__HANDLE__)->Mask = 0x00FFU ; \
|
||||
} \
|
||||
else \
|
||||
{ \
|
||||
(__HANDLE__)->Mask = 0x007FU ; \
|
||||
} \
|
||||
} \
|
||||
else if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_7B) \
|
||||
{ \
|
||||
if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \
|
||||
{ \
|
||||
(__HANDLE__)->Mask = 0x007FU ; \
|
||||
} \
|
||||
else \
|
||||
{ \
|
||||
(__HANDLE__)->Mask = 0x003FU ; \
|
||||
} \
|
||||
} \
|
||||
else \
|
||||
{ \
|
||||
(__HANDLE__)->Mask = 0x0000U; \
|
||||
} \
|
||||
} while(0U)
|
||||
|
||||
/**
|
||||
* @brief Ensure that UART frame length is valid.
|
||||
* @param __LENGTH__ UART frame length.
|
||||
* @retval SET (__LENGTH__ is valid) or RESET (__LENGTH__ is invalid)
|
||||
*/
|
||||
#define IS_UART_WORD_LENGTH(__LENGTH__) (((__LENGTH__) == UART_WORDLENGTH_7B) || \
|
||||
((__LENGTH__) == UART_WORDLENGTH_8B) || \
|
||||
((__LENGTH__) == UART_WORDLENGTH_9B))
|
||||
|
||||
/**
|
||||
* @brief Ensure that UART wake-up address length is valid.
|
||||
* @param __ADDRESS__ UART wake-up address length.
|
||||
* @retval SET (__ADDRESS__ is valid) or RESET (__ADDRESS__ is invalid)
|
||||
*/
|
||||
#define IS_UART_ADDRESSLENGTH_DETECT(__ADDRESS__) (((__ADDRESS__) == UART_ADDRESS_DETECT_4B) || \
|
||||
((__ADDRESS__) == UART_ADDRESS_DETECT_7B))
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private functions ---------------------------------------------------------*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* STM32F7xx_HAL_UART_EX_H */
|
||||
|
||||
1973
project/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_bus.h
Normal file
1973
project/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_bus.h
Normal file
File diff suppressed because it is too large
Load Diff
639
project/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_cortex.h
Normal file
639
project/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_cortex.h
Normal file
@@ -0,0 +1,639 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f7xx_ll_cortex.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of CORTEX LL module.
|
||||
@verbatim
|
||||
==============================================================================
|
||||
##### How to use this driver #####
|
||||
==============================================================================
|
||||
[..]
|
||||
The LL CORTEX driver contains a set of generic APIs that can be
|
||||
used by user:
|
||||
(+) SYSTICK configuration used by LL_mDelay and LL_Init1msTick
|
||||
functions
|
||||
(+) Low power mode configuration (SCB register of Cortex-MCU)
|
||||
(+) MPU API to configure and enable regions
|
||||
(+) API to access to MCU info (CPUID register)
|
||||
(+) API to enable fault handler (SHCSR accesses)
|
||||
|
||||
@endverbatim
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file in
|
||||
* the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __STM32F7xx_LL_CORTEX_H
|
||||
#define __STM32F7xx_LL_CORTEX_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f7xx.h"
|
||||
|
||||
/** @addtogroup STM32F7xx_LL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup CORTEX_LL CORTEX
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Private types -------------------------------------------------------------*/
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
|
||||
/* Private constants ---------------------------------------------------------*/
|
||||
|
||||
/* Private macros ------------------------------------------------------------*/
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/** @defgroup CORTEX_LL_Exported_Constants CORTEX Exported Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup CORTEX_LL_EC_CLKSOURCE_HCLK SYSTICK Clock Source
|
||||
* @{
|
||||
*/
|
||||
#define LL_SYSTICK_CLKSOURCE_HCLK_DIV8 0x00000000U /*!< AHB clock divided by 8 selected as SysTick clock source.*/
|
||||
#define LL_SYSTICK_CLKSOURCE_HCLK SysTick_CTRL_CLKSOURCE_Msk /*!< AHB clock selected as SysTick clock source. */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CORTEX_LL_EC_FAULT Handler Fault type
|
||||
* @{
|
||||
*/
|
||||
#define LL_HANDLER_FAULT_USG SCB_SHCSR_USGFAULTENA_Msk /*!< Usage fault */
|
||||
#define LL_HANDLER_FAULT_BUS SCB_SHCSR_BUSFAULTENA_Msk /*!< Bus fault */
|
||||
#define LL_HANDLER_FAULT_MEM SCB_SHCSR_MEMFAULTENA_Msk /*!< Memory management fault */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#if __MPU_PRESENT
|
||||
|
||||
/** @defgroup CORTEX_LL_EC_CTRL_HFNMI_PRIVDEF MPU Control
|
||||
* @{
|
||||
*/
|
||||
#define LL_MPU_CTRL_HFNMI_PRIVDEF_NONE 0x00000000U /*!< Disable NMI and privileged SW access */
|
||||
#define LL_MPU_CTRL_HARDFAULT_NMI MPU_CTRL_HFNMIENA_Msk /*!< Enables the operation of MPU during hard fault, NMI, and FAULTMASK handlers */
|
||||
#define LL_MPU_CTRL_PRIVILEGED_DEFAULT MPU_CTRL_PRIVDEFENA_Msk /*!< Enable privileged software access to default memory map */
|
||||
#define LL_MPU_CTRL_HFNMI_PRIVDEF (MPU_CTRL_HFNMIENA_Msk | MPU_CTRL_PRIVDEFENA_Msk) /*!< Enable NMI and privileged SW access */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CORTEX_LL_EC_REGION MPU Region Number
|
||||
* @{
|
||||
*/
|
||||
#define LL_MPU_REGION_NUMBER0 0x00U /*!< REGION Number 0 */
|
||||
#define LL_MPU_REGION_NUMBER1 0x01U /*!< REGION Number 1 */
|
||||
#define LL_MPU_REGION_NUMBER2 0x02U /*!< REGION Number 2 */
|
||||
#define LL_MPU_REGION_NUMBER3 0x03U /*!< REGION Number 3 */
|
||||
#define LL_MPU_REGION_NUMBER4 0x04U /*!< REGION Number 4 */
|
||||
#define LL_MPU_REGION_NUMBER5 0x05U /*!< REGION Number 5 */
|
||||
#define LL_MPU_REGION_NUMBER6 0x06U /*!< REGION Number 6 */
|
||||
#define LL_MPU_REGION_NUMBER7 0x07U /*!< REGION Number 7 */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CORTEX_LL_EC_REGION_SIZE MPU Region Size
|
||||
* @{
|
||||
*/
|
||||
#define LL_MPU_REGION_SIZE_32B (0x04U << MPU_RASR_SIZE_Pos) /*!< 32B Size of the MPU protection region */
|
||||
#define LL_MPU_REGION_SIZE_64B (0x05U << MPU_RASR_SIZE_Pos) /*!< 64B Size of the MPU protection region */
|
||||
#define LL_MPU_REGION_SIZE_128B (0x06U << MPU_RASR_SIZE_Pos) /*!< 128B Size of the MPU protection region */
|
||||
#define LL_MPU_REGION_SIZE_256B (0x07U << MPU_RASR_SIZE_Pos) /*!< 256B Size of the MPU protection region */
|
||||
#define LL_MPU_REGION_SIZE_512B (0x08U << MPU_RASR_SIZE_Pos) /*!< 512B Size of the MPU protection region */
|
||||
#define LL_MPU_REGION_SIZE_1KB (0x09U << MPU_RASR_SIZE_Pos) /*!< 1KB Size of the MPU protection region */
|
||||
#define LL_MPU_REGION_SIZE_2KB (0x0AU << MPU_RASR_SIZE_Pos) /*!< 2KB Size of the MPU protection region */
|
||||
#define LL_MPU_REGION_SIZE_4KB (0x0BU << MPU_RASR_SIZE_Pos) /*!< 4KB Size of the MPU protection region */
|
||||
#define LL_MPU_REGION_SIZE_8KB (0x0CU << MPU_RASR_SIZE_Pos) /*!< 8KB Size of the MPU protection region */
|
||||
#define LL_MPU_REGION_SIZE_16KB (0x0DU << MPU_RASR_SIZE_Pos) /*!< 16KB Size of the MPU protection region */
|
||||
#define LL_MPU_REGION_SIZE_32KB (0x0EU << MPU_RASR_SIZE_Pos) /*!< 32KB Size of the MPU protection region */
|
||||
#define LL_MPU_REGION_SIZE_64KB (0x0FU << MPU_RASR_SIZE_Pos) /*!< 64KB Size of the MPU protection region */
|
||||
#define LL_MPU_REGION_SIZE_128KB (0x10U << MPU_RASR_SIZE_Pos) /*!< 128KB Size of the MPU protection region */
|
||||
#define LL_MPU_REGION_SIZE_256KB (0x11U << MPU_RASR_SIZE_Pos) /*!< 256KB Size of the MPU protection region */
|
||||
#define LL_MPU_REGION_SIZE_512KB (0x12U << MPU_RASR_SIZE_Pos) /*!< 512KB Size of the MPU protection region */
|
||||
#define LL_MPU_REGION_SIZE_1MB (0x13U << MPU_RASR_SIZE_Pos) /*!< 1MB Size of the MPU protection region */
|
||||
#define LL_MPU_REGION_SIZE_2MB (0x14U << MPU_RASR_SIZE_Pos) /*!< 2MB Size of the MPU protection region */
|
||||
#define LL_MPU_REGION_SIZE_4MB (0x15U << MPU_RASR_SIZE_Pos) /*!< 4MB Size of the MPU protection region */
|
||||
#define LL_MPU_REGION_SIZE_8MB (0x16U << MPU_RASR_SIZE_Pos) /*!< 8MB Size of the MPU protection region */
|
||||
#define LL_MPU_REGION_SIZE_16MB (0x17U << MPU_RASR_SIZE_Pos) /*!< 16MB Size of the MPU protection region */
|
||||
#define LL_MPU_REGION_SIZE_32MB (0x18U << MPU_RASR_SIZE_Pos) /*!< 32MB Size of the MPU protection region */
|
||||
#define LL_MPU_REGION_SIZE_64MB (0x19U << MPU_RASR_SIZE_Pos) /*!< 64MB Size of the MPU protection region */
|
||||
#define LL_MPU_REGION_SIZE_128MB (0x1AU << MPU_RASR_SIZE_Pos) /*!< 128MB Size of the MPU protection region */
|
||||
#define LL_MPU_REGION_SIZE_256MB (0x1BU << MPU_RASR_SIZE_Pos) /*!< 256MB Size of the MPU protection region */
|
||||
#define LL_MPU_REGION_SIZE_512MB (0x1CU << MPU_RASR_SIZE_Pos) /*!< 512MB Size of the MPU protection region */
|
||||
#define LL_MPU_REGION_SIZE_1GB (0x1DU << MPU_RASR_SIZE_Pos) /*!< 1GB Size of the MPU protection region */
|
||||
#define LL_MPU_REGION_SIZE_2GB (0x1EU << MPU_RASR_SIZE_Pos) /*!< 2GB Size of the MPU protection region */
|
||||
#define LL_MPU_REGION_SIZE_4GB (0x1FU << MPU_RASR_SIZE_Pos) /*!< 4GB Size of the MPU protection region */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CORTEX_LL_EC_REGION_PRIVILEDGES MPU Region Privileges
|
||||
* @{
|
||||
*/
|
||||
#define LL_MPU_REGION_NO_ACCESS (0x00U << MPU_RASR_AP_Pos) /*!< No access*/
|
||||
#define LL_MPU_REGION_PRIV_RW (0x01U << MPU_RASR_AP_Pos) /*!< RW privileged (privileged access only)*/
|
||||
#define LL_MPU_REGION_PRIV_RW_URO (0x02U << MPU_RASR_AP_Pos) /*!< RW privileged - RO user (Write in a user program generates a fault) */
|
||||
#define LL_MPU_REGION_FULL_ACCESS (0x03U << MPU_RASR_AP_Pos) /*!< RW privileged & user (Full access) */
|
||||
#define LL_MPU_REGION_PRIV_RO (0x05U << MPU_RASR_AP_Pos) /*!< RO privileged (privileged read only)*/
|
||||
#define LL_MPU_REGION_PRIV_RO_URO (0x06U << MPU_RASR_AP_Pos) /*!< RO privileged & user (read only) */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CORTEX_LL_EC_TEX MPU TEX Level
|
||||
* @{
|
||||
*/
|
||||
#define LL_MPU_TEX_LEVEL0 (0x00U << MPU_RASR_TEX_Pos) /*!< b000 for TEX bits */
|
||||
#define LL_MPU_TEX_LEVEL1 (0x01U << MPU_RASR_TEX_Pos) /*!< b001 for TEX bits */
|
||||
#define LL_MPU_TEX_LEVEL2 (0x02U << MPU_RASR_TEX_Pos) /*!< b010 for TEX bits */
|
||||
|
||||
/* Legacy Define */
|
||||
#define LL_MPU_TEX_LEVEL4 (0x04U << MPU_RASR_TEX_Pos) /*!< b100 for TEX bits */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CORTEX_LL_EC_INSTRUCTION_ACCESS MPU Instruction Access
|
||||
* @{
|
||||
*/
|
||||
#define LL_MPU_INSTRUCTION_ACCESS_ENABLE 0x00U /*!< Instruction fetches enabled */
|
||||
#define LL_MPU_INSTRUCTION_ACCESS_DISABLE MPU_RASR_XN_Msk /*!< Instruction fetches disabled*/
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CORTEX_LL_EC_SHAREABLE_ACCESS MPU Shareable Access
|
||||
* @{
|
||||
*/
|
||||
#define LL_MPU_ACCESS_SHAREABLE MPU_RASR_S_Msk /*!< Shareable memory attribute */
|
||||
#define LL_MPU_ACCESS_NOT_SHAREABLE 0x00U /*!< Not Shareable memory attribute */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CORTEX_LL_EC_CACHEABLE_ACCESS MPU Cacheable Access
|
||||
* @{
|
||||
*/
|
||||
#define LL_MPU_ACCESS_CACHEABLE MPU_RASR_C_Msk /*!< Cacheable memory attribute */
|
||||
#define LL_MPU_ACCESS_NOT_CACHEABLE 0x00U /*!< Not Cacheable memory attribute */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CORTEX_LL_EC_BUFFERABLE_ACCESS MPU Bufferable Access
|
||||
* @{
|
||||
*/
|
||||
#define LL_MPU_ACCESS_BUFFERABLE MPU_RASR_B_Msk /*!< Bufferable memory attribute */
|
||||
#define LL_MPU_ACCESS_NOT_BUFFERABLE 0x00U /*!< Not Bufferable memory attribute */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
#endif /* __MPU_PRESENT */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @defgroup CORTEX_LL_Exported_Functions CORTEX Exported Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup CORTEX_LL_EF_SYSTICK SYSTICK
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief This function checks if the Systick counter flag is active or not.
|
||||
* @note It can be used in timeout function on application side.
|
||||
* @rmtoll STK_CTRL COUNTFLAG LL_SYSTICK_IsActiveCounterFlag
|
||||
* @retval State of bit (1 or 0).
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_SYSTICK_IsActiveCounterFlag(void)
|
||||
{
|
||||
return ((SysTick->CTRL & SysTick_CTRL_COUNTFLAG_Msk) == (SysTick_CTRL_COUNTFLAG_Msk));
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Configures the SysTick clock source
|
||||
* @rmtoll STK_CTRL CLKSOURCE LL_SYSTICK_SetClkSource
|
||||
* @param Source This parameter can be one of the following values:
|
||||
* @arg @ref LL_SYSTICK_CLKSOURCE_HCLK_DIV8
|
||||
* @arg @ref LL_SYSTICK_CLKSOURCE_HCLK
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_SYSTICK_SetClkSource(uint32_t Source)
|
||||
{
|
||||
if (Source == LL_SYSTICK_CLKSOURCE_HCLK)
|
||||
{
|
||||
SET_BIT(SysTick->CTRL, LL_SYSTICK_CLKSOURCE_HCLK);
|
||||
}
|
||||
else
|
||||
{
|
||||
CLEAR_BIT(SysTick->CTRL, LL_SYSTICK_CLKSOURCE_HCLK);
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Get the SysTick clock source
|
||||
* @rmtoll STK_CTRL CLKSOURCE LL_SYSTICK_GetClkSource
|
||||
* @retval Returned value can be one of the following values:
|
||||
* @arg @ref LL_SYSTICK_CLKSOURCE_HCLK_DIV8
|
||||
* @arg @ref LL_SYSTICK_CLKSOURCE_HCLK
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_SYSTICK_GetClkSource(void)
|
||||
{
|
||||
return READ_BIT(SysTick->CTRL, LL_SYSTICK_CLKSOURCE_HCLK);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Enable SysTick exception request
|
||||
* @rmtoll STK_CTRL TICKINT LL_SYSTICK_EnableIT
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_SYSTICK_EnableIT(void)
|
||||
{
|
||||
SET_BIT(SysTick->CTRL, SysTick_CTRL_TICKINT_Msk);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Disable SysTick exception request
|
||||
* @rmtoll STK_CTRL TICKINT LL_SYSTICK_DisableIT
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_SYSTICK_DisableIT(void)
|
||||
{
|
||||
CLEAR_BIT(SysTick->CTRL, SysTick_CTRL_TICKINT_Msk);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Checks if the SYSTICK interrupt is enabled or disabled.
|
||||
* @rmtoll STK_CTRL TICKINT LL_SYSTICK_IsEnabledIT
|
||||
* @retval State of bit (1 or 0).
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_SYSTICK_IsEnabledIT(void)
|
||||
{
|
||||
return (READ_BIT(SysTick->CTRL, SysTick_CTRL_TICKINT_Msk) == (SysTick_CTRL_TICKINT_Msk));
|
||||
}
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CORTEX_LL_EF_LOW_POWER_MODE LOW POWER MODE
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Processor uses sleep as its low power mode
|
||||
* @rmtoll SCB_SCR SLEEPDEEP LL_LPM_EnableSleep
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_LPM_EnableSleep(void)
|
||||
{
|
||||
/* Clear SLEEPDEEP bit of Cortex System Control Register */
|
||||
CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk));
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Processor uses deep sleep as its low power mode
|
||||
* @rmtoll SCB_SCR SLEEPDEEP LL_LPM_EnableDeepSleep
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_LPM_EnableDeepSleep(void)
|
||||
{
|
||||
/* Set SLEEPDEEP bit of Cortex System Control Register */
|
||||
SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk));
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Configures sleep-on-exit when returning from Handler mode to Thread mode.
|
||||
* @note Setting this bit to 1 enables an interrupt-driven application to avoid returning to an
|
||||
* empty main application.
|
||||
* @rmtoll SCB_SCR SLEEPONEXIT LL_LPM_EnableSleepOnExit
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_LPM_EnableSleepOnExit(void)
|
||||
{
|
||||
/* Set SLEEPONEXIT bit of Cortex System Control Register */
|
||||
SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPONEXIT_Msk));
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Do not sleep when returning to Thread mode.
|
||||
* @rmtoll SCB_SCR SLEEPONEXIT LL_LPM_DisableSleepOnExit
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_LPM_DisableSleepOnExit(void)
|
||||
{
|
||||
/* Clear SLEEPONEXIT bit of Cortex System Control Register */
|
||||
CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPONEXIT_Msk));
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Enabled events and all interrupts, including disabled interrupts, can wakeup the
|
||||
* processor.
|
||||
* @rmtoll SCB_SCR SEVEONPEND LL_LPM_EnableEventOnPend
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_LPM_EnableEventOnPend(void)
|
||||
{
|
||||
/* Set SEVEONPEND bit of Cortex System Control Register */
|
||||
SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SEVONPEND_Msk));
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Only enabled interrupts or events can wakeup the processor, disabled interrupts are
|
||||
* excluded
|
||||
* @rmtoll SCB_SCR SEVEONPEND LL_LPM_DisableEventOnPend
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_LPM_DisableEventOnPend(void)
|
||||
{
|
||||
/* Clear SEVEONPEND bit of Cortex System Control Register */
|
||||
CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SEVONPEND_Msk));
|
||||
}
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CORTEX_LL_EF_HANDLER HANDLER
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Enable a fault in System handler control register (SHCSR)
|
||||
* @rmtoll SCB_SHCSR MEMFAULTENA LL_HANDLER_EnableFault
|
||||
* @param Fault This parameter can be a combination of the following values:
|
||||
* @arg @ref LL_HANDLER_FAULT_USG
|
||||
* @arg @ref LL_HANDLER_FAULT_BUS
|
||||
* @arg @ref LL_HANDLER_FAULT_MEM
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_HANDLER_EnableFault(uint32_t Fault)
|
||||
{
|
||||
/* Enable the system handler fault */
|
||||
SET_BIT(SCB->SHCSR, Fault);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Disable a fault in System handler control register (SHCSR)
|
||||
* @rmtoll SCB_SHCSR MEMFAULTENA LL_HANDLER_DisableFault
|
||||
* @param Fault This parameter can be a combination of the following values:
|
||||
* @arg @ref LL_HANDLER_FAULT_USG
|
||||
* @arg @ref LL_HANDLER_FAULT_BUS
|
||||
* @arg @ref LL_HANDLER_FAULT_MEM
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_HANDLER_DisableFault(uint32_t Fault)
|
||||
{
|
||||
/* Disable the system handler fault */
|
||||
CLEAR_BIT(SCB->SHCSR, Fault);
|
||||
}
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CORTEX_LL_EF_MCU_INFO MCU INFO
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Get Implementer code
|
||||
* @rmtoll SCB_CPUID IMPLEMENTER LL_CPUID_GetImplementer
|
||||
* @retval Value should be equal to 0x41 for ARM
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_CPUID_GetImplementer(void)
|
||||
{
|
||||
return (uint32_t)(READ_BIT(SCB->CPUID, SCB_CPUID_IMPLEMENTER_Msk) >> SCB_CPUID_IMPLEMENTER_Pos);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Get Variant number (The r value in the rnpn product revision identifier)
|
||||
* @rmtoll SCB_CPUID VARIANT LL_CPUID_GetVariant
|
||||
* @retval Value between 0 and 255 (0x0: revision 0)
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_CPUID_GetVariant(void)
|
||||
{
|
||||
return (uint32_t)(READ_BIT(SCB->CPUID, SCB_CPUID_VARIANT_Msk) >> SCB_CPUID_VARIANT_Pos);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Get Constant number
|
||||
* @rmtoll SCB_CPUID ARCHITECTURE LL_CPUID_GetConstant
|
||||
* @retval Value should be equal to 0xF for Cortex-M7 devices
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_CPUID_GetConstant(void)
|
||||
{
|
||||
return (uint32_t)(READ_BIT(SCB->CPUID, SCB_CPUID_ARCHITECTURE_Msk) >> SCB_CPUID_ARCHITECTURE_Pos);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Get Part number
|
||||
* @rmtoll SCB_CPUID PARTNO LL_CPUID_GetParNo
|
||||
* @retval Value should be equal to 0xC27 for Cortex-M7
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_CPUID_GetParNo(void)
|
||||
{
|
||||
return (uint32_t)(READ_BIT(SCB->CPUID, SCB_CPUID_PARTNO_Msk) >> SCB_CPUID_PARTNO_Pos);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Get Revision number (The p value in the rnpn product revision identifier, indicates patch release)
|
||||
* @rmtoll SCB_CPUID REVISION LL_CPUID_GetRevision
|
||||
* @retval Value between 0 and 255 (0x1: patch 1)
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_CPUID_GetRevision(void)
|
||||
{
|
||||
return (uint32_t)(READ_BIT(SCB->CPUID, SCB_CPUID_REVISION_Msk) >> SCB_CPUID_REVISION_Pos);
|
||||
}
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#if __MPU_PRESENT
|
||||
/** @defgroup CORTEX_LL_EF_MPU MPU
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Enable MPU with input options
|
||||
* @rmtoll MPU_CTRL ENABLE LL_MPU_Enable
|
||||
* @param Options This parameter can be one of the following values:
|
||||
* @arg @ref LL_MPU_CTRL_HFNMI_PRIVDEF_NONE
|
||||
* @arg @ref LL_MPU_CTRL_HARDFAULT_NMI
|
||||
* @arg @ref LL_MPU_CTRL_PRIVILEGED_DEFAULT
|
||||
* @arg @ref LL_MPU_CTRL_HFNMI_PRIVDEF
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_MPU_Enable(uint32_t Options)
|
||||
{
|
||||
/* Enable the MPU*/
|
||||
WRITE_REG(MPU->CTRL, (MPU_CTRL_ENABLE_Msk | Options));
|
||||
/* Ensure MPU settings take effects */
|
||||
__DSB();
|
||||
/* Sequence instruction fetches using update settings */
|
||||
__ISB();
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Disable MPU
|
||||
* @rmtoll MPU_CTRL ENABLE LL_MPU_Disable
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_MPU_Disable(void)
|
||||
{
|
||||
/* Make sure outstanding transfers are done */
|
||||
__DMB();
|
||||
/* Disable MPU*/
|
||||
WRITE_REG(MPU->CTRL, 0U);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Check if MPU is enabled or not
|
||||
* @rmtoll MPU_CTRL ENABLE LL_MPU_IsEnabled
|
||||
* @retval State of bit (1 or 0).
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_MPU_IsEnabled(void)
|
||||
{
|
||||
return (READ_BIT(MPU->CTRL, MPU_CTRL_ENABLE_Msk) == (MPU_CTRL_ENABLE_Msk));
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Enable a MPU region
|
||||
* @rmtoll MPU_RASR ENABLE LL_MPU_EnableRegion
|
||||
* @param Region This parameter can be one of the following values:
|
||||
* @arg @ref LL_MPU_REGION_NUMBER0
|
||||
* @arg @ref LL_MPU_REGION_NUMBER1
|
||||
* @arg @ref LL_MPU_REGION_NUMBER2
|
||||
* @arg @ref LL_MPU_REGION_NUMBER3
|
||||
* @arg @ref LL_MPU_REGION_NUMBER4
|
||||
* @arg @ref LL_MPU_REGION_NUMBER5
|
||||
* @arg @ref LL_MPU_REGION_NUMBER6
|
||||
* @arg @ref LL_MPU_REGION_NUMBER7
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_MPU_EnableRegion(uint32_t Region)
|
||||
{
|
||||
/* Set Region number */
|
||||
WRITE_REG(MPU->RNR, Region);
|
||||
/* Enable the MPU region */
|
||||
SET_BIT(MPU->RASR, MPU_RASR_ENABLE_Msk);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Configure and enable a region
|
||||
* @rmtoll MPU_RNR REGION LL_MPU_ConfigRegion\n
|
||||
* MPU_RBAR REGION LL_MPU_ConfigRegion\n
|
||||
* MPU_RBAR ADDR LL_MPU_ConfigRegion\n
|
||||
* MPU_RASR XN LL_MPU_ConfigRegion\n
|
||||
* MPU_RASR AP LL_MPU_ConfigRegion\n
|
||||
* MPU_RASR S LL_MPU_ConfigRegion\n
|
||||
* MPU_RASR C LL_MPU_ConfigRegion\n
|
||||
* MPU_RASR B LL_MPU_ConfigRegion\n
|
||||
* MPU_RASR SIZE LL_MPU_ConfigRegion
|
||||
* @param Region This parameter can be one of the following values:
|
||||
* @arg @ref LL_MPU_REGION_NUMBER0
|
||||
* @arg @ref LL_MPU_REGION_NUMBER1
|
||||
* @arg @ref LL_MPU_REGION_NUMBER2
|
||||
* @arg @ref LL_MPU_REGION_NUMBER3
|
||||
* @arg @ref LL_MPU_REGION_NUMBER4
|
||||
* @arg @ref LL_MPU_REGION_NUMBER5
|
||||
* @arg @ref LL_MPU_REGION_NUMBER6
|
||||
* @arg @ref LL_MPU_REGION_NUMBER7
|
||||
* @param Address Value of region base address
|
||||
* @param SubRegionDisable Sub-region disable value between Min_Data = 0x00 and Max_Data = 0xFF
|
||||
* @param Attributes This parameter can be a combination of the following values:
|
||||
* @arg @ref LL_MPU_REGION_SIZE_32B or @ref LL_MPU_REGION_SIZE_64B or @ref LL_MPU_REGION_SIZE_128B or @ref LL_MPU_REGION_SIZE_256B or @ref LL_MPU_REGION_SIZE_512B
|
||||
* or @ref LL_MPU_REGION_SIZE_1KB or @ref LL_MPU_REGION_SIZE_2KB or @ref LL_MPU_REGION_SIZE_4KB or @ref LL_MPU_REGION_SIZE_8KB or @ref LL_MPU_REGION_SIZE_16KB
|
||||
* or @ref LL_MPU_REGION_SIZE_32KB or @ref LL_MPU_REGION_SIZE_64KB or @ref LL_MPU_REGION_SIZE_128KB or @ref LL_MPU_REGION_SIZE_256KB or @ref LL_MPU_REGION_SIZE_512KB
|
||||
* or @ref LL_MPU_REGION_SIZE_1MB or @ref LL_MPU_REGION_SIZE_2MB or @ref LL_MPU_REGION_SIZE_4MB or @ref LL_MPU_REGION_SIZE_8MB or @ref LL_MPU_REGION_SIZE_16MB
|
||||
* or @ref LL_MPU_REGION_SIZE_32MB or @ref LL_MPU_REGION_SIZE_64MB or @ref LL_MPU_REGION_SIZE_128MB or @ref LL_MPU_REGION_SIZE_256MB or @ref LL_MPU_REGION_SIZE_512MB
|
||||
* or @ref LL_MPU_REGION_SIZE_1GB or @ref LL_MPU_REGION_SIZE_2GB or @ref LL_MPU_REGION_SIZE_4GB
|
||||
* @arg @ref LL_MPU_REGION_NO_ACCESS or @ref LL_MPU_REGION_PRIV_RW or @ref LL_MPU_REGION_PRIV_RW_URO or @ref LL_MPU_REGION_FULL_ACCESS
|
||||
* or @ref LL_MPU_REGION_PRIV_RO or @ref LL_MPU_REGION_PRIV_RO_URO
|
||||
* @arg @ref LL_MPU_TEX_LEVEL0 or @ref LL_MPU_TEX_LEVEL1 or @ref LL_MPU_TEX_LEVEL2
|
||||
* @arg @ref LL_MPU_INSTRUCTION_ACCESS_ENABLE or @ref LL_MPU_INSTRUCTION_ACCESS_DISABLE
|
||||
* @arg @ref LL_MPU_ACCESS_SHAREABLE or @ref LL_MPU_ACCESS_NOT_SHAREABLE
|
||||
* @arg @ref LL_MPU_ACCESS_CACHEABLE or @ref LL_MPU_ACCESS_NOT_CACHEABLE
|
||||
* @arg @ref LL_MPU_ACCESS_BUFFERABLE or @ref LL_MPU_ACCESS_NOT_BUFFERABLE
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_MPU_ConfigRegion(uint32_t Region, uint32_t SubRegionDisable, uint32_t Address, uint32_t Attributes)
|
||||
{
|
||||
/* Set Region number */
|
||||
WRITE_REG(MPU->RNR, Region);
|
||||
/* Set base address */
|
||||
WRITE_REG(MPU->RBAR, (Address & 0xFFFFFFE0U));
|
||||
/* Configure MPU */
|
||||
WRITE_REG(MPU->RASR, (MPU_RASR_ENABLE_Msk | Attributes | SubRegionDisable << MPU_RASR_SRD_Pos));
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Disable a region
|
||||
* @rmtoll MPU_RNR REGION LL_MPU_DisableRegion\n
|
||||
* MPU_RASR ENABLE LL_MPU_DisableRegion
|
||||
* @param Region This parameter can be one of the following values:
|
||||
* @arg @ref LL_MPU_REGION_NUMBER0
|
||||
* @arg @ref LL_MPU_REGION_NUMBER1
|
||||
* @arg @ref LL_MPU_REGION_NUMBER2
|
||||
* @arg @ref LL_MPU_REGION_NUMBER3
|
||||
* @arg @ref LL_MPU_REGION_NUMBER4
|
||||
* @arg @ref LL_MPU_REGION_NUMBER5
|
||||
* @arg @ref LL_MPU_REGION_NUMBER6
|
||||
* @arg @ref LL_MPU_REGION_NUMBER7
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_MPU_DisableRegion(uint32_t Region)
|
||||
{
|
||||
/* Set Region number */
|
||||
WRITE_REG(MPU->RNR, Region);
|
||||
/* Disable the MPU region */
|
||||
CLEAR_BIT(MPU->RASR, MPU_RASR_ENABLE_Msk);
|
||||
}
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#endif /* __MPU_PRESENT */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __STM32F7xx_LL_CORTEX_H */
|
||||
|
||||
2891
project/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_dma.h
Normal file
2891
project/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_dma.h
Normal file
File diff suppressed because it is too large
Load Diff
2117
project/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_dma2d.h
Normal file
2117
project/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_dma2d.h
Normal file
File diff suppressed because it is too large
Load Diff
948
project/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_exti.h
Normal file
948
project/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_exti.h
Normal file
@@ -0,0 +1,948 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f7xx_ll_exti.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of EXTI LL module.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __STM32F7xx_LL_EXTI_H
|
||||
#define __STM32F7xx_LL_EXTI_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f7xx.h"
|
||||
|
||||
/** @addtogroup STM32F7xx_LL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
#if defined (EXTI)
|
||||
|
||||
/** @defgroup EXTI_LL EXTI
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Private types -------------------------------------------------------------*/
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
/* Private constants ---------------------------------------------------------*/
|
||||
/* Private Macros ------------------------------------------------------------*/
|
||||
#if defined(USE_FULL_LL_DRIVER)
|
||||
/** @defgroup EXTI_LL_Private_Macros EXTI Private Macros
|
||||
* @{
|
||||
*/
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
#endif /*USE_FULL_LL_DRIVER*/
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
#if defined(USE_FULL_LL_DRIVER)
|
||||
/** @defgroup EXTI_LL_ES_INIT EXTI Exported Init structure
|
||||
* @{
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
|
||||
uint32_t Line_0_31; /*!< Specifies the EXTI lines to be enabled or disabled for Lines in range 0 to 31
|
||||
This parameter can be any combination of @ref EXTI_LL_EC_LINE */
|
||||
|
||||
FunctionalState LineCommand; /*!< Specifies the new state of the selected EXTI lines.
|
||||
This parameter can be set either to ENABLE or DISABLE */
|
||||
|
||||
uint8_t Mode; /*!< Specifies the mode for the EXTI lines.
|
||||
This parameter can be a value of @ref EXTI_LL_EC_MODE. */
|
||||
|
||||
uint8_t Trigger; /*!< Specifies the trigger signal active edge for the EXTI lines.
|
||||
This parameter can be a value of @ref EXTI_LL_EC_TRIGGER. */
|
||||
} LL_EXTI_InitTypeDef;
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
#endif /*USE_FULL_LL_DRIVER*/
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/** @defgroup EXTI_LL_Exported_Constants EXTI Exported Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup EXTI_LL_EC_LINE LINE
|
||||
* @{
|
||||
*/
|
||||
#define LL_EXTI_LINE_0 EXTI_IMR_IM0 /*!< Extended line 0 */
|
||||
#define LL_EXTI_LINE_1 EXTI_IMR_IM1 /*!< Extended line 1 */
|
||||
#define LL_EXTI_LINE_2 EXTI_IMR_IM2 /*!< Extended line 2 */
|
||||
#define LL_EXTI_LINE_3 EXTI_IMR_IM3 /*!< Extended line 3 */
|
||||
#define LL_EXTI_LINE_4 EXTI_IMR_IM4 /*!< Extended line 4 */
|
||||
#define LL_EXTI_LINE_5 EXTI_IMR_IM5 /*!< Extended line 5 */
|
||||
#define LL_EXTI_LINE_6 EXTI_IMR_IM6 /*!< Extended line 6 */
|
||||
#define LL_EXTI_LINE_7 EXTI_IMR_IM7 /*!< Extended line 7 */
|
||||
#define LL_EXTI_LINE_8 EXTI_IMR_IM8 /*!< Extended line 8 */
|
||||
#define LL_EXTI_LINE_9 EXTI_IMR_IM9 /*!< Extended line 9 */
|
||||
#define LL_EXTI_LINE_10 EXTI_IMR_IM10 /*!< Extended line 10 */
|
||||
#define LL_EXTI_LINE_11 EXTI_IMR_IM11 /*!< Extended line 11 */
|
||||
#define LL_EXTI_LINE_12 EXTI_IMR_IM12 /*!< Extended line 12 */
|
||||
#define LL_EXTI_LINE_13 EXTI_IMR_IM13 /*!< Extended line 13 */
|
||||
#define LL_EXTI_LINE_14 EXTI_IMR_IM14 /*!< Extended line 14 */
|
||||
#define LL_EXTI_LINE_15 EXTI_IMR_IM15 /*!< Extended line 15 */
|
||||
#if defined(EXTI_IMR_IM16)
|
||||
#define LL_EXTI_LINE_16 EXTI_IMR_IM16 /*!< Extended line 16 */
|
||||
#endif
|
||||
#define LL_EXTI_LINE_17 EXTI_IMR_IM17 /*!< Extended line 17 */
|
||||
#if defined(EXTI_IMR_IM18)
|
||||
#define LL_EXTI_LINE_18 EXTI_IMR_IM18 /*!< Extended line 18 */
|
||||
#endif
|
||||
#define LL_EXTI_LINE_19 EXTI_IMR_IM19 /*!< Extended line 19 */
|
||||
#if defined(EXTI_IMR_IM20)
|
||||
#define LL_EXTI_LINE_20 EXTI_IMR_IM20 /*!< Extended line 20 */
|
||||
#endif
|
||||
#if defined(EXTI_IMR_IM21)
|
||||
#define LL_EXTI_LINE_21 EXTI_IMR_IM21 /*!< Extended line 21 */
|
||||
#endif
|
||||
#if defined(EXTI_IMR_IM22)
|
||||
#define LL_EXTI_LINE_22 EXTI_IMR_IM22 /*!< Extended line 22 */
|
||||
#endif
|
||||
#define LL_EXTI_LINE_23 EXTI_IMR_IM23 /*!< Extended line 23 */
|
||||
#if defined(EXTI_IMR_IM24)
|
||||
#define LL_EXTI_LINE_24 EXTI_IMR_IM24 /*!< Extended line 24 */
|
||||
#endif
|
||||
#if defined(EXTI_IMR_IM25)
|
||||
#define LL_EXTI_LINE_25 EXTI_IMR_IM25 /*!< Extended line 25 */
|
||||
#endif
|
||||
#if defined(EXTI_IMR_IM26)
|
||||
#define LL_EXTI_LINE_26 EXTI_IMR_IM26 /*!< Extended line 26 */
|
||||
#endif
|
||||
#if defined(EXTI_IMR_IM27)
|
||||
#define LL_EXTI_LINE_27 EXTI_IMR_IM27 /*!< Extended line 27 */
|
||||
#endif
|
||||
#if defined(EXTI_IMR_IM28)
|
||||
#define LL_EXTI_LINE_28 EXTI_IMR_IM28 /*!< Extended line 28 */
|
||||
#endif
|
||||
#if defined(EXTI_IMR_IM29)
|
||||
#define LL_EXTI_LINE_29 EXTI_IMR_IM29 /*!< Extended line 29 */
|
||||
#endif
|
||||
#if defined(EXTI_IMR_IM30)
|
||||
#define LL_EXTI_LINE_30 EXTI_IMR_IM30 /*!< Extended line 30 */
|
||||
#endif
|
||||
#if defined(EXTI_IMR_IM31)
|
||||
#define LL_EXTI_LINE_31 EXTI_IMR_IM31 /*!< Extended line 31 */
|
||||
#endif
|
||||
#define LL_EXTI_LINE_ALL_0_31 EXTI_IMR_IM /*!< All Extended line not reserved*/
|
||||
|
||||
|
||||
#define LL_EXTI_LINE_ALL (0xFFFFFFFFU) /*!< All Extended line */
|
||||
|
||||
#if defined(USE_FULL_LL_DRIVER)
|
||||
#define LL_EXTI_LINE_NONE (0x00000000U) /*!< None Extended line */
|
||||
#endif /*USE_FULL_LL_DRIVER*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
#if defined(USE_FULL_LL_DRIVER)
|
||||
|
||||
/** @defgroup EXTI_LL_EC_MODE Mode
|
||||
* @{
|
||||
*/
|
||||
#define LL_EXTI_MODE_IT ((uint8_t)0x00U) /*!< Interrupt Mode */
|
||||
#define LL_EXTI_MODE_EVENT ((uint8_t)0x01U) /*!< Event Mode */
|
||||
#define LL_EXTI_MODE_IT_EVENT ((uint8_t)0x02U) /*!< Interrupt & Event Mode */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup EXTI_LL_EC_TRIGGER Edge Trigger
|
||||
* @{
|
||||
*/
|
||||
#define LL_EXTI_TRIGGER_NONE ((uint8_t)0x00U) /*!< No Trigger Mode */
|
||||
#define LL_EXTI_TRIGGER_RISING ((uint8_t)0x01U) /*!< Trigger Rising Mode */
|
||||
#define LL_EXTI_TRIGGER_FALLING ((uint8_t)0x02U) /*!< Trigger Falling Mode */
|
||||
#define LL_EXTI_TRIGGER_RISING_FALLING ((uint8_t)0x03U) /*!< Trigger Rising & Falling Mode */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
|
||||
#endif /*USE_FULL_LL_DRIVER*/
|
||||
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/** @defgroup EXTI_LL_Exported_Macros EXTI Exported Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup EXTI_LL_EM_WRITE_READ Common Write and read registers Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Write a value in EXTI register
|
||||
* @param __REG__ Register to be written
|
||||
* @param __VALUE__ Value to be written in the register
|
||||
* @retval None
|
||||
*/
|
||||
#define LL_EXTI_WriteReg(__REG__, __VALUE__) WRITE_REG(EXTI->__REG__, (__VALUE__))
|
||||
|
||||
/**
|
||||
* @brief Read a value in EXTI register
|
||||
* @param __REG__ Register to be read
|
||||
* @retval Register value
|
||||
*/
|
||||
#define LL_EXTI_ReadReg(__REG__) READ_REG(EXTI->__REG__)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
|
||||
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @defgroup EXTI_LL_Exported_Functions EXTI Exported Functions
|
||||
* @{
|
||||
*/
|
||||
/** @defgroup EXTI_LL_EF_IT_Management IT_Management
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Enable ExtiLine Interrupt request for Lines in range 0 to 31
|
||||
* @note The reset value for the direct or internal lines (see RM)
|
||||
* is set to 1 in order to enable the interrupt by default.
|
||||
* Bits are set automatically at Power on.
|
||||
* @rmtoll IMR IMx LL_EXTI_EnableIT_0_31
|
||||
* @param ExtiLine This parameter can be one of the following values:
|
||||
* @arg @ref LL_EXTI_LINE_0
|
||||
* @arg @ref LL_EXTI_LINE_1
|
||||
* @arg @ref LL_EXTI_LINE_2
|
||||
* @arg @ref LL_EXTI_LINE_3
|
||||
* @arg @ref LL_EXTI_LINE_4
|
||||
* @arg @ref LL_EXTI_LINE_5
|
||||
* @arg @ref LL_EXTI_LINE_6
|
||||
* @arg @ref LL_EXTI_LINE_7
|
||||
* @arg @ref LL_EXTI_LINE_8
|
||||
* @arg @ref LL_EXTI_LINE_9
|
||||
* @arg @ref LL_EXTI_LINE_10
|
||||
* @arg @ref LL_EXTI_LINE_11
|
||||
* @arg @ref LL_EXTI_LINE_12
|
||||
* @arg @ref LL_EXTI_LINE_13
|
||||
* @arg @ref LL_EXTI_LINE_14
|
||||
* @arg @ref LL_EXTI_LINE_15
|
||||
* @arg @ref LL_EXTI_LINE_16
|
||||
* @arg @ref LL_EXTI_LINE_17
|
||||
* @arg @ref LL_EXTI_LINE_18
|
||||
* @arg @ref LL_EXTI_LINE_19
|
||||
* @arg @ref LL_EXTI_LINE_20
|
||||
* @arg @ref LL_EXTI_LINE_21
|
||||
* @arg @ref LL_EXTI_LINE_22
|
||||
* @arg @ref LL_EXTI_LINE_23
|
||||
* @arg @ref LL_EXTI_LINE_24(*)
|
||||
* @arg @ref LL_EXTI_LINE_ALL_0_31
|
||||
* @note (*): Available in some devices
|
||||
* @note Please check each device line mapping for EXTI Line availability
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_EXTI_EnableIT_0_31(uint32_t ExtiLine)
|
||||
{
|
||||
SET_BIT(EXTI->IMR, ExtiLine);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Disable ExtiLine Interrupt request for Lines in range 0 to 31
|
||||
* @note The reset value for the direct or internal lines (see RM)
|
||||
* is set to 1 in order to enable the interrupt by default.
|
||||
* Bits are set automatically at Power on.
|
||||
* @rmtoll IMR IMx LL_EXTI_DisableIT_0_31
|
||||
* @param ExtiLine This parameter can be one of the following values:
|
||||
* @arg @ref LL_EXTI_LINE_0
|
||||
* @arg @ref LL_EXTI_LINE_1
|
||||
* @arg @ref LL_EXTI_LINE_2
|
||||
* @arg @ref LL_EXTI_LINE_3
|
||||
* @arg @ref LL_EXTI_LINE_4
|
||||
* @arg @ref LL_EXTI_LINE_5
|
||||
* @arg @ref LL_EXTI_LINE_6
|
||||
* @arg @ref LL_EXTI_LINE_7
|
||||
* @arg @ref LL_EXTI_LINE_8
|
||||
* @arg @ref LL_EXTI_LINE_9
|
||||
* @arg @ref LL_EXTI_LINE_10
|
||||
* @arg @ref LL_EXTI_LINE_11
|
||||
* @arg @ref LL_EXTI_LINE_12
|
||||
* @arg @ref LL_EXTI_LINE_13
|
||||
* @arg @ref LL_EXTI_LINE_14
|
||||
* @arg @ref LL_EXTI_LINE_15
|
||||
* @arg @ref LL_EXTI_LINE_16
|
||||
* @arg @ref LL_EXTI_LINE_17
|
||||
* @arg @ref LL_EXTI_LINE_18
|
||||
* @arg @ref LL_EXTI_LINE_19
|
||||
* @arg @ref LL_EXTI_LINE_20
|
||||
* @arg @ref LL_EXTI_LINE_21
|
||||
* @arg @ref LL_EXTI_LINE_22
|
||||
* @arg @ref LL_EXTI_LINE_23
|
||||
* @arg @ref LL_EXTI_LINE_24(*)
|
||||
* @arg @ref LL_EXTI_LINE_ALL_0_31
|
||||
* @note (*): Available in some devices
|
||||
* @note Please check each device line mapping for EXTI Line availability
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_EXTI_DisableIT_0_31(uint32_t ExtiLine)
|
||||
{
|
||||
CLEAR_BIT(EXTI->IMR, ExtiLine);
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
* @brief Indicate if ExtiLine Interrupt request is enabled for Lines in range 0 to 31
|
||||
* @note The reset value for the direct or internal lines (see RM)
|
||||
* is set to 1 in order to enable the interrupt by default.
|
||||
* Bits are set automatically at Power on.
|
||||
* @rmtoll IMR IMx LL_EXTI_IsEnabledIT_0_31
|
||||
* @param ExtiLine This parameter can be one of the following values:
|
||||
* @arg @ref LL_EXTI_LINE_0
|
||||
* @arg @ref LL_EXTI_LINE_1
|
||||
* @arg @ref LL_EXTI_LINE_2
|
||||
* @arg @ref LL_EXTI_LINE_3
|
||||
* @arg @ref LL_EXTI_LINE_4
|
||||
* @arg @ref LL_EXTI_LINE_5
|
||||
* @arg @ref LL_EXTI_LINE_6
|
||||
* @arg @ref LL_EXTI_LINE_7
|
||||
* @arg @ref LL_EXTI_LINE_8
|
||||
* @arg @ref LL_EXTI_LINE_9
|
||||
* @arg @ref LL_EXTI_LINE_10
|
||||
* @arg @ref LL_EXTI_LINE_11
|
||||
* @arg @ref LL_EXTI_LINE_12
|
||||
* @arg @ref LL_EXTI_LINE_13
|
||||
* @arg @ref LL_EXTI_LINE_14
|
||||
* @arg @ref LL_EXTI_LINE_15
|
||||
* @arg @ref LL_EXTI_LINE_16
|
||||
* @arg @ref LL_EXTI_LINE_17
|
||||
* @arg @ref LL_EXTI_LINE_18
|
||||
* @arg @ref LL_EXTI_LINE_19
|
||||
* @arg @ref LL_EXTI_LINE_20
|
||||
* @arg @ref LL_EXTI_LINE_21
|
||||
* @arg @ref LL_EXTI_LINE_22
|
||||
* @arg @ref LL_EXTI_LINE_23
|
||||
* @arg @ref LL_EXTI_LINE_24(*)
|
||||
* @arg @ref LL_EXTI_LINE_ALL_0_31
|
||||
* @note (*): Available in some devices
|
||||
* @note Please check each device line mapping for EXTI Line availability
|
||||
* @retval State of bit (1 or 0).
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_EXTI_IsEnabledIT_0_31(uint32_t ExtiLine)
|
||||
{
|
||||
return (READ_BIT(EXTI->IMR, ExtiLine) == (ExtiLine));
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup EXTI_LL_EF_Event_Management Event_Management
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Enable ExtiLine Event request for Lines in range 0 to 31
|
||||
* @rmtoll EMR EMx LL_EXTI_EnableEvent_0_31
|
||||
* @param ExtiLine This parameter can be one of the following values:
|
||||
* @arg @ref LL_EXTI_LINE_0
|
||||
* @arg @ref LL_EXTI_LINE_1
|
||||
* @arg @ref LL_EXTI_LINE_2
|
||||
* @arg @ref LL_EXTI_LINE_3
|
||||
* @arg @ref LL_EXTI_LINE_4
|
||||
* @arg @ref LL_EXTI_LINE_5
|
||||
* @arg @ref LL_EXTI_LINE_6
|
||||
* @arg @ref LL_EXTI_LINE_7
|
||||
* @arg @ref LL_EXTI_LINE_8
|
||||
* @arg @ref LL_EXTI_LINE_9
|
||||
* @arg @ref LL_EXTI_LINE_10
|
||||
* @arg @ref LL_EXTI_LINE_11
|
||||
* @arg @ref LL_EXTI_LINE_12
|
||||
* @arg @ref LL_EXTI_LINE_13
|
||||
* @arg @ref LL_EXTI_LINE_14
|
||||
* @arg @ref LL_EXTI_LINE_15
|
||||
* @arg @ref LL_EXTI_LINE_16
|
||||
* @arg @ref LL_EXTI_LINE_17
|
||||
* @arg @ref LL_EXTI_LINE_18
|
||||
* @arg @ref LL_EXTI_LINE_19
|
||||
* @arg @ref LL_EXTI_LINE_20
|
||||
* @arg @ref LL_EXTI_LINE_21
|
||||
* @arg @ref LL_EXTI_LINE_22
|
||||
* @arg @ref LL_EXTI_LINE_23
|
||||
* @arg @ref LL_EXTI_LINE_24(*)
|
||||
* @arg @ref LL_EXTI_LINE_ALL_0_31
|
||||
* @note (*): Available in some devices
|
||||
* @note Please check each device line mapping for EXTI Line availability
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_EXTI_EnableEvent_0_31(uint32_t ExtiLine)
|
||||
{
|
||||
SET_BIT(EXTI->EMR, ExtiLine);
|
||||
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
* @brief Disable ExtiLine Event request for Lines in range 0 to 31
|
||||
* @rmtoll EMR EMx LL_EXTI_DisableEvent_0_31
|
||||
* @param ExtiLine This parameter can be one of the following values:
|
||||
* @arg @ref LL_EXTI_LINE_0
|
||||
* @arg @ref LL_EXTI_LINE_1
|
||||
* @arg @ref LL_EXTI_LINE_2
|
||||
* @arg @ref LL_EXTI_LINE_3
|
||||
* @arg @ref LL_EXTI_LINE_4
|
||||
* @arg @ref LL_EXTI_LINE_5
|
||||
* @arg @ref LL_EXTI_LINE_6
|
||||
* @arg @ref LL_EXTI_LINE_7
|
||||
* @arg @ref LL_EXTI_LINE_8
|
||||
* @arg @ref LL_EXTI_LINE_9
|
||||
* @arg @ref LL_EXTI_LINE_10
|
||||
* @arg @ref LL_EXTI_LINE_11
|
||||
* @arg @ref LL_EXTI_LINE_12
|
||||
* @arg @ref LL_EXTI_LINE_13
|
||||
* @arg @ref LL_EXTI_LINE_14
|
||||
* @arg @ref LL_EXTI_LINE_15
|
||||
* @arg @ref LL_EXTI_LINE_16
|
||||
* @arg @ref LL_EXTI_LINE_17
|
||||
* @arg @ref LL_EXTI_LINE_18
|
||||
* @arg @ref LL_EXTI_LINE_19
|
||||
* @arg @ref LL_EXTI_LINE_20
|
||||
* @arg @ref LL_EXTI_LINE_21
|
||||
* @arg @ref LL_EXTI_LINE_22
|
||||
* @arg @ref LL_EXTI_LINE_23
|
||||
* @arg @ref LL_EXTI_LINE_24(*)
|
||||
* @arg @ref LL_EXTI_LINE_ALL_0_31
|
||||
* @note (*): Available in some devices
|
||||
* @note Please check each device line mapping for EXTI Line availability
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_EXTI_DisableEvent_0_31(uint32_t ExtiLine)
|
||||
{
|
||||
CLEAR_BIT(EXTI->EMR, ExtiLine);
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
* @brief Indicate if ExtiLine Event request is enabled for Lines in range 0 to 31
|
||||
* @rmtoll EMR EMx LL_EXTI_IsEnabledEvent_0_31
|
||||
* @param ExtiLine This parameter can be one of the following values:
|
||||
* @arg @ref LL_EXTI_LINE_0
|
||||
* @arg @ref LL_EXTI_LINE_1
|
||||
* @arg @ref LL_EXTI_LINE_2
|
||||
* @arg @ref LL_EXTI_LINE_3
|
||||
* @arg @ref LL_EXTI_LINE_4
|
||||
* @arg @ref LL_EXTI_LINE_5
|
||||
* @arg @ref LL_EXTI_LINE_6
|
||||
* @arg @ref LL_EXTI_LINE_7
|
||||
* @arg @ref LL_EXTI_LINE_8
|
||||
* @arg @ref LL_EXTI_LINE_9
|
||||
* @arg @ref LL_EXTI_LINE_10
|
||||
* @arg @ref LL_EXTI_LINE_11
|
||||
* @arg @ref LL_EXTI_LINE_12
|
||||
* @arg @ref LL_EXTI_LINE_13
|
||||
* @arg @ref LL_EXTI_LINE_14
|
||||
* @arg @ref LL_EXTI_LINE_15
|
||||
* @arg @ref LL_EXTI_LINE_16
|
||||
* @arg @ref LL_EXTI_LINE_17
|
||||
* @arg @ref LL_EXTI_LINE_18
|
||||
* @arg @ref LL_EXTI_LINE_19
|
||||
* @arg @ref LL_EXTI_LINE_20
|
||||
* @arg @ref LL_EXTI_LINE_21
|
||||
* @arg @ref LL_EXTI_LINE_22
|
||||
* @arg @ref LL_EXTI_LINE_23
|
||||
* @arg @ref LL_EXTI_LINE_24(*)
|
||||
* @arg @ref LL_EXTI_LINE_ALL_0_31
|
||||
* @note (*): Available in some devices
|
||||
* @note Please check each device line mapping for EXTI Line availability
|
||||
* @retval State of bit (1 or 0).
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_EXTI_IsEnabledEvent_0_31(uint32_t ExtiLine)
|
||||
{
|
||||
return (READ_BIT(EXTI->EMR, ExtiLine) == (ExtiLine));
|
||||
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup EXTI_LL_EF_Rising_Trigger_Management Rising_Trigger_Management
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Enable ExtiLine Rising Edge Trigger for Lines in range 0 to 31
|
||||
* @note The configurable wakeup lines are edge-triggered. No glitch must be
|
||||
* generated on these lines. If a rising edge on a configurable interrupt
|
||||
* line occurs during a write operation in the EXTI_RTSR register, the
|
||||
* pending bit is not set.
|
||||
* Rising and falling edge triggers can be set for
|
||||
* the same interrupt line. In this case, both generate a trigger
|
||||
* condition.
|
||||
* @rmtoll RTSR RTx LL_EXTI_EnableRisingTrig_0_31
|
||||
* @param ExtiLine This parameter can be a combination of the following values:
|
||||
* @arg @ref LL_EXTI_LINE_0
|
||||
* @arg @ref LL_EXTI_LINE_1
|
||||
* @arg @ref LL_EXTI_LINE_2
|
||||
* @arg @ref LL_EXTI_LINE_3
|
||||
* @arg @ref LL_EXTI_LINE_4
|
||||
* @arg @ref LL_EXTI_LINE_5
|
||||
* @arg @ref LL_EXTI_LINE_6
|
||||
* @arg @ref LL_EXTI_LINE_7
|
||||
* @arg @ref LL_EXTI_LINE_8
|
||||
* @arg @ref LL_EXTI_LINE_9
|
||||
* @arg @ref LL_EXTI_LINE_10
|
||||
* @arg @ref LL_EXTI_LINE_11
|
||||
* @arg @ref LL_EXTI_LINE_12
|
||||
* @arg @ref LL_EXTI_LINE_13
|
||||
* @arg @ref LL_EXTI_LINE_14
|
||||
* @arg @ref LL_EXTI_LINE_15
|
||||
* @arg @ref LL_EXTI_LINE_16
|
||||
* @arg @ref LL_EXTI_LINE_18
|
||||
* @arg @ref LL_EXTI_LINE_19
|
||||
* @arg @ref LL_EXTI_LINE_20
|
||||
* @arg @ref LL_EXTI_LINE_21
|
||||
* @arg @ref LL_EXTI_LINE_22
|
||||
* @note Please check each device line mapping for EXTI Line availability
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_EXTI_EnableRisingTrig_0_31(uint32_t ExtiLine)
|
||||
{
|
||||
SET_BIT(EXTI->RTSR, ExtiLine);
|
||||
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
* @brief Disable ExtiLine Rising Edge Trigger for Lines in range 0 to 31
|
||||
* @note The configurable wakeup lines are edge-triggered. No glitch must be
|
||||
* generated on these lines. If a rising edge on a configurable interrupt
|
||||
* line occurs during a write operation in the EXTI_RTSR register, the
|
||||
* pending bit is not set.
|
||||
* Rising and falling edge triggers can be set for
|
||||
* the same interrupt line. In this case, both generate a trigger
|
||||
* condition.
|
||||
* @rmtoll RTSR RTx LL_EXTI_DisableRisingTrig_0_31
|
||||
* @param ExtiLine This parameter can be a combination of the following values:
|
||||
* @arg @ref LL_EXTI_LINE_0
|
||||
* @arg @ref LL_EXTI_LINE_1
|
||||
* @arg @ref LL_EXTI_LINE_2
|
||||
* @arg @ref LL_EXTI_LINE_3
|
||||
* @arg @ref LL_EXTI_LINE_4
|
||||
* @arg @ref LL_EXTI_LINE_5
|
||||
* @arg @ref LL_EXTI_LINE_6
|
||||
* @arg @ref LL_EXTI_LINE_7
|
||||
* @arg @ref LL_EXTI_LINE_8
|
||||
* @arg @ref LL_EXTI_LINE_9
|
||||
* @arg @ref LL_EXTI_LINE_10
|
||||
* @arg @ref LL_EXTI_LINE_11
|
||||
* @arg @ref LL_EXTI_LINE_12
|
||||
* @arg @ref LL_EXTI_LINE_13
|
||||
* @arg @ref LL_EXTI_LINE_14
|
||||
* @arg @ref LL_EXTI_LINE_15
|
||||
* @arg @ref LL_EXTI_LINE_16
|
||||
* @arg @ref LL_EXTI_LINE_18
|
||||
* @arg @ref LL_EXTI_LINE_19
|
||||
* @arg @ref LL_EXTI_LINE_20
|
||||
* @arg @ref LL_EXTI_LINE_21
|
||||
* @arg @ref LL_EXTI_LINE_22
|
||||
* @note Please check each device line mapping for EXTI Line availability
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_EXTI_DisableRisingTrig_0_31(uint32_t ExtiLine)
|
||||
{
|
||||
CLEAR_BIT(EXTI->RTSR, ExtiLine);
|
||||
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
* @brief Check if rising edge trigger is enabled for Lines in range 0 to 31
|
||||
* @rmtoll RTSR RTx LL_EXTI_IsEnabledRisingTrig_0_31
|
||||
* @param ExtiLine This parameter can be a combination of the following values:
|
||||
* @arg @ref LL_EXTI_LINE_0
|
||||
* @arg @ref LL_EXTI_LINE_1
|
||||
* @arg @ref LL_EXTI_LINE_2
|
||||
* @arg @ref LL_EXTI_LINE_3
|
||||
* @arg @ref LL_EXTI_LINE_4
|
||||
* @arg @ref LL_EXTI_LINE_5
|
||||
* @arg @ref LL_EXTI_LINE_6
|
||||
* @arg @ref LL_EXTI_LINE_7
|
||||
* @arg @ref LL_EXTI_LINE_8
|
||||
* @arg @ref LL_EXTI_LINE_9
|
||||
* @arg @ref LL_EXTI_LINE_10
|
||||
* @arg @ref LL_EXTI_LINE_11
|
||||
* @arg @ref LL_EXTI_LINE_12
|
||||
* @arg @ref LL_EXTI_LINE_13
|
||||
* @arg @ref LL_EXTI_LINE_14
|
||||
* @arg @ref LL_EXTI_LINE_15
|
||||
* @arg @ref LL_EXTI_LINE_16
|
||||
* @arg @ref LL_EXTI_LINE_18
|
||||
* @arg @ref LL_EXTI_LINE_19
|
||||
* @arg @ref LL_EXTI_LINE_20
|
||||
* @arg @ref LL_EXTI_LINE_21
|
||||
* @arg @ref LL_EXTI_LINE_22
|
||||
* @note Please check each device line mapping for EXTI Line availability
|
||||
* @retval State of bit (1 or 0).
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_EXTI_IsEnabledRisingTrig_0_31(uint32_t ExtiLine)
|
||||
{
|
||||
return (READ_BIT(EXTI->RTSR, ExtiLine) == (ExtiLine));
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup EXTI_LL_EF_Falling_Trigger_Management Falling_Trigger_Management
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Enable ExtiLine Falling Edge Trigger for Lines in range 0 to 31
|
||||
* @note The configurable wakeup lines are edge-triggered. No glitch must be
|
||||
* generated on these lines. If a falling edge on a configurable interrupt
|
||||
* line occurs during a write operation in the EXTI_FTSR register, the
|
||||
* pending bit is not set.
|
||||
* Rising and falling edge triggers can be set for
|
||||
* the same interrupt line. In this case, both generate a trigger
|
||||
* condition.
|
||||
* @rmtoll FTSR FTx LL_EXTI_EnableFallingTrig_0_31
|
||||
* @param ExtiLine This parameter can be a combination of the following values:
|
||||
* @arg @ref LL_EXTI_LINE_0
|
||||
* @arg @ref LL_EXTI_LINE_1
|
||||
* @arg @ref LL_EXTI_LINE_2
|
||||
* @arg @ref LL_EXTI_LINE_3
|
||||
* @arg @ref LL_EXTI_LINE_4
|
||||
* @arg @ref LL_EXTI_LINE_5
|
||||
* @arg @ref LL_EXTI_LINE_6
|
||||
* @arg @ref LL_EXTI_LINE_7
|
||||
* @arg @ref LL_EXTI_LINE_8
|
||||
* @arg @ref LL_EXTI_LINE_9
|
||||
* @arg @ref LL_EXTI_LINE_10
|
||||
* @arg @ref LL_EXTI_LINE_11
|
||||
* @arg @ref LL_EXTI_LINE_12
|
||||
* @arg @ref LL_EXTI_LINE_13
|
||||
* @arg @ref LL_EXTI_LINE_14
|
||||
* @arg @ref LL_EXTI_LINE_15
|
||||
* @arg @ref LL_EXTI_LINE_16
|
||||
* @arg @ref LL_EXTI_LINE_18
|
||||
* @arg @ref LL_EXTI_LINE_19
|
||||
* @arg @ref LL_EXTI_LINE_20
|
||||
* @arg @ref LL_EXTI_LINE_21
|
||||
* @arg @ref LL_EXTI_LINE_22
|
||||
* @note Please check each device line mapping for EXTI Line availability
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_EXTI_EnableFallingTrig_0_31(uint32_t ExtiLine)
|
||||
{
|
||||
SET_BIT(EXTI->FTSR, ExtiLine);
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
* @brief Disable ExtiLine Falling Edge Trigger for Lines in range 0 to 31
|
||||
* @note The configurable wakeup lines are edge-triggered. No glitch must be
|
||||
* generated on these lines. If a Falling edge on a configurable interrupt
|
||||
* line occurs during a write operation in the EXTI_FTSR register, the
|
||||
* pending bit is not set.
|
||||
* Rising and falling edge triggers can be set for the same interrupt line.
|
||||
* In this case, both generate a trigger condition.
|
||||
* @rmtoll FTSR FTx LL_EXTI_DisableFallingTrig_0_31
|
||||
* @param ExtiLine This parameter can be a combination of the following values:
|
||||
* @arg @ref LL_EXTI_LINE_0
|
||||
* @arg @ref LL_EXTI_LINE_1
|
||||
* @arg @ref LL_EXTI_LINE_2
|
||||
* @arg @ref LL_EXTI_LINE_3
|
||||
* @arg @ref LL_EXTI_LINE_4
|
||||
* @arg @ref LL_EXTI_LINE_5
|
||||
* @arg @ref LL_EXTI_LINE_6
|
||||
* @arg @ref LL_EXTI_LINE_7
|
||||
* @arg @ref LL_EXTI_LINE_8
|
||||
* @arg @ref LL_EXTI_LINE_9
|
||||
* @arg @ref LL_EXTI_LINE_10
|
||||
* @arg @ref LL_EXTI_LINE_11
|
||||
* @arg @ref LL_EXTI_LINE_12
|
||||
* @arg @ref LL_EXTI_LINE_13
|
||||
* @arg @ref LL_EXTI_LINE_14
|
||||
* @arg @ref LL_EXTI_LINE_15
|
||||
* @arg @ref LL_EXTI_LINE_16
|
||||
* @arg @ref LL_EXTI_LINE_18
|
||||
* @arg @ref LL_EXTI_LINE_19
|
||||
* @arg @ref LL_EXTI_LINE_20
|
||||
* @arg @ref LL_EXTI_LINE_21
|
||||
* @arg @ref LL_EXTI_LINE_22
|
||||
* @note Please check each device line mapping for EXTI Line availability
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_EXTI_DisableFallingTrig_0_31(uint32_t ExtiLine)
|
||||
{
|
||||
CLEAR_BIT(EXTI->FTSR, ExtiLine);
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
* @brief Check if falling edge trigger is enabled for Lines in range 0 to 31
|
||||
* @rmtoll FTSR FTx LL_EXTI_IsEnabledFallingTrig_0_31
|
||||
* @param ExtiLine This parameter can be a combination of the following values:
|
||||
* @arg @ref LL_EXTI_LINE_0
|
||||
* @arg @ref LL_EXTI_LINE_1
|
||||
* @arg @ref LL_EXTI_LINE_2
|
||||
* @arg @ref LL_EXTI_LINE_3
|
||||
* @arg @ref LL_EXTI_LINE_4
|
||||
* @arg @ref LL_EXTI_LINE_5
|
||||
* @arg @ref LL_EXTI_LINE_6
|
||||
* @arg @ref LL_EXTI_LINE_7
|
||||
* @arg @ref LL_EXTI_LINE_8
|
||||
* @arg @ref LL_EXTI_LINE_9
|
||||
* @arg @ref LL_EXTI_LINE_10
|
||||
* @arg @ref LL_EXTI_LINE_11
|
||||
* @arg @ref LL_EXTI_LINE_12
|
||||
* @arg @ref LL_EXTI_LINE_13
|
||||
* @arg @ref LL_EXTI_LINE_14
|
||||
* @arg @ref LL_EXTI_LINE_15
|
||||
* @arg @ref LL_EXTI_LINE_16
|
||||
* @arg @ref LL_EXTI_LINE_18
|
||||
* @arg @ref LL_EXTI_LINE_19
|
||||
* @arg @ref LL_EXTI_LINE_20
|
||||
* @arg @ref LL_EXTI_LINE_21
|
||||
* @arg @ref LL_EXTI_LINE_22
|
||||
* @note Please check each device line mapping for EXTI Line availability
|
||||
* @retval State of bit (1 or 0).
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_EXTI_IsEnabledFallingTrig_0_31(uint32_t ExtiLine)
|
||||
{
|
||||
return (READ_BIT(EXTI->FTSR, ExtiLine) == (ExtiLine));
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup EXTI_LL_EF_Software_Interrupt_Management Software_Interrupt_Management
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Generate a software Interrupt Event for Lines in range 0 to 31
|
||||
* @note If the interrupt is enabled on this line in the EXTI_IMR, writing a 1 to
|
||||
* this bit when it is at '0' sets the corresponding pending bit in EXTI_PR
|
||||
* resulting in an interrupt request generation.
|
||||
* This bit is cleared by clearing the corresponding bit in the EXTI_PR
|
||||
* register (by writing a 1 into the bit)
|
||||
* @rmtoll SWIER SWIx LL_EXTI_GenerateSWI_0_31
|
||||
* @param ExtiLine This parameter can be a combination of the following values:
|
||||
* @arg @ref LL_EXTI_LINE_0
|
||||
* @arg @ref LL_EXTI_LINE_1
|
||||
* @arg @ref LL_EXTI_LINE_2
|
||||
* @arg @ref LL_EXTI_LINE_3
|
||||
* @arg @ref LL_EXTI_LINE_4
|
||||
* @arg @ref LL_EXTI_LINE_5
|
||||
* @arg @ref LL_EXTI_LINE_6
|
||||
* @arg @ref LL_EXTI_LINE_7
|
||||
* @arg @ref LL_EXTI_LINE_8
|
||||
* @arg @ref LL_EXTI_LINE_9
|
||||
* @arg @ref LL_EXTI_LINE_10
|
||||
* @arg @ref LL_EXTI_LINE_11
|
||||
* @arg @ref LL_EXTI_LINE_12
|
||||
* @arg @ref LL_EXTI_LINE_13
|
||||
* @arg @ref LL_EXTI_LINE_14
|
||||
* @arg @ref LL_EXTI_LINE_15
|
||||
* @arg @ref LL_EXTI_LINE_16
|
||||
* @arg @ref LL_EXTI_LINE_18
|
||||
* @arg @ref LL_EXTI_LINE_19
|
||||
* @arg @ref LL_EXTI_LINE_20
|
||||
* @arg @ref LL_EXTI_LINE_21
|
||||
* @arg @ref LL_EXTI_LINE_22
|
||||
* @note Please check each device line mapping for EXTI Line availability
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_EXTI_GenerateSWI_0_31(uint32_t ExtiLine)
|
||||
{
|
||||
SET_BIT(EXTI->SWIER, ExtiLine);
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup EXTI_LL_EF_Flag_Management Flag_Management
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Check if the ExtLine Flag is set or not for Lines in range 0 to 31
|
||||
* @note This bit is set when the selected edge event arrives on the interrupt
|
||||
* line. This bit is cleared by writing a 1 to the bit.
|
||||
* @rmtoll PR PIFx LL_EXTI_IsActiveFlag_0_31
|
||||
* @param ExtiLine This parameter can be a combination of the following values:
|
||||
* @arg @ref LL_EXTI_LINE_0
|
||||
* @arg @ref LL_EXTI_LINE_1
|
||||
* @arg @ref LL_EXTI_LINE_2
|
||||
* @arg @ref LL_EXTI_LINE_3
|
||||
* @arg @ref LL_EXTI_LINE_4
|
||||
* @arg @ref LL_EXTI_LINE_5
|
||||
* @arg @ref LL_EXTI_LINE_6
|
||||
* @arg @ref LL_EXTI_LINE_7
|
||||
* @arg @ref LL_EXTI_LINE_8
|
||||
* @arg @ref LL_EXTI_LINE_9
|
||||
* @arg @ref LL_EXTI_LINE_10
|
||||
* @arg @ref LL_EXTI_LINE_11
|
||||
* @arg @ref LL_EXTI_LINE_12
|
||||
* @arg @ref LL_EXTI_LINE_13
|
||||
* @arg @ref LL_EXTI_LINE_14
|
||||
* @arg @ref LL_EXTI_LINE_15
|
||||
* @arg @ref LL_EXTI_LINE_16
|
||||
* @arg @ref LL_EXTI_LINE_18
|
||||
* @arg @ref LL_EXTI_LINE_19
|
||||
* @arg @ref LL_EXTI_LINE_20
|
||||
* @arg @ref LL_EXTI_LINE_21
|
||||
* @arg @ref LL_EXTI_LINE_22
|
||||
* @note Please check each device line mapping for EXTI Line availability
|
||||
* @retval State of bit (1 or 0).
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_EXTI_IsActiveFlag_0_31(uint32_t ExtiLine)
|
||||
{
|
||||
return (READ_BIT(EXTI->PR, ExtiLine) == (ExtiLine));
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
* @brief Read ExtLine Combination Flag for Lines in range 0 to 31
|
||||
* @note This bit is set when the selected edge event arrives on the interrupt
|
||||
* line. This bit is cleared by writing a 1 to the bit.
|
||||
* @rmtoll PR PIFx LL_EXTI_ReadFlag_0_31
|
||||
* @param ExtiLine This parameter can be a combination of the following values:
|
||||
* @arg @ref LL_EXTI_LINE_0
|
||||
* @arg @ref LL_EXTI_LINE_1
|
||||
* @arg @ref LL_EXTI_LINE_2
|
||||
* @arg @ref LL_EXTI_LINE_3
|
||||
* @arg @ref LL_EXTI_LINE_4
|
||||
* @arg @ref LL_EXTI_LINE_5
|
||||
* @arg @ref LL_EXTI_LINE_6
|
||||
* @arg @ref LL_EXTI_LINE_7
|
||||
* @arg @ref LL_EXTI_LINE_8
|
||||
* @arg @ref LL_EXTI_LINE_9
|
||||
* @arg @ref LL_EXTI_LINE_10
|
||||
* @arg @ref LL_EXTI_LINE_11
|
||||
* @arg @ref LL_EXTI_LINE_12
|
||||
* @arg @ref LL_EXTI_LINE_13
|
||||
* @arg @ref LL_EXTI_LINE_14
|
||||
* @arg @ref LL_EXTI_LINE_15
|
||||
* @arg @ref LL_EXTI_LINE_16
|
||||
* @arg @ref LL_EXTI_LINE_18
|
||||
* @arg @ref LL_EXTI_LINE_19
|
||||
* @arg @ref LL_EXTI_LINE_20
|
||||
* @arg @ref LL_EXTI_LINE_21
|
||||
* @arg @ref LL_EXTI_LINE_22
|
||||
* @note Please check each device line mapping for EXTI Line availability
|
||||
* @retval @note This bit is set when the selected edge event arrives on the interrupt
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_EXTI_ReadFlag_0_31(uint32_t ExtiLine)
|
||||
{
|
||||
return (uint32_t)(READ_BIT(EXTI->PR, ExtiLine));
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
* @brief Clear ExtLine Flags for Lines in range 0 to 31
|
||||
* @note This bit is set when the selected edge event arrives on the interrupt
|
||||
* line. This bit is cleared by writing a 1 to the bit.
|
||||
* @rmtoll PR PIFx LL_EXTI_ClearFlag_0_31
|
||||
* @param ExtiLine This parameter can be a combination of the following values:
|
||||
* @arg @ref LL_EXTI_LINE_0
|
||||
* @arg @ref LL_EXTI_LINE_1
|
||||
* @arg @ref LL_EXTI_LINE_2
|
||||
* @arg @ref LL_EXTI_LINE_3
|
||||
* @arg @ref LL_EXTI_LINE_4
|
||||
* @arg @ref LL_EXTI_LINE_5
|
||||
* @arg @ref LL_EXTI_LINE_6
|
||||
* @arg @ref LL_EXTI_LINE_7
|
||||
* @arg @ref LL_EXTI_LINE_8
|
||||
* @arg @ref LL_EXTI_LINE_9
|
||||
* @arg @ref LL_EXTI_LINE_10
|
||||
* @arg @ref LL_EXTI_LINE_11
|
||||
* @arg @ref LL_EXTI_LINE_12
|
||||
* @arg @ref LL_EXTI_LINE_13
|
||||
* @arg @ref LL_EXTI_LINE_14
|
||||
* @arg @ref LL_EXTI_LINE_15
|
||||
* @arg @ref LL_EXTI_LINE_16
|
||||
* @arg @ref LL_EXTI_LINE_18
|
||||
* @arg @ref LL_EXTI_LINE_19
|
||||
* @arg @ref LL_EXTI_LINE_20
|
||||
* @arg @ref LL_EXTI_LINE_21
|
||||
* @arg @ref LL_EXTI_LINE_22
|
||||
* @note Please check each device line mapping for EXTI Line availability
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_EXTI_ClearFlag_0_31(uint32_t ExtiLine)
|
||||
{
|
||||
WRITE_REG(EXTI->PR, ExtiLine);
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#if defined(USE_FULL_LL_DRIVER)
|
||||
/** @defgroup EXTI_LL_EF_Init Initialization and de-initialization functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
uint32_t LL_EXTI_Init(LL_EXTI_InitTypeDef *EXTI_InitStruct);
|
||||
uint32_t LL_EXTI_DeInit(void);
|
||||
void LL_EXTI_StructInit(LL_EXTI_InitTypeDef *EXTI_InitStruct);
|
||||
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
#endif /* USE_FULL_LL_DRIVER */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#endif /* EXTI */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __STM32F7xx_LL_EXTI_H */
|
||||
|
||||
1151
project/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_fmc.h
Normal file
1151
project/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_fmc.h
Normal file
File diff suppressed because it is too large
Load Diff
981
project/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_gpio.h
Normal file
981
project/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_gpio.h
Normal file
@@ -0,0 +1,981 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f7xx_ll_gpio.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of GPIO LL module.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __STM32F7xx_LL_GPIO_H
|
||||
#define __STM32F7xx_LL_GPIO_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f7xx.h"
|
||||
|
||||
/** @addtogroup STM32F7xx_LL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
#if defined (GPIOA) || defined (GPIOB) || defined (GPIOC) || defined (GPIOD) || defined (GPIOE) || defined (GPIOF) || defined (GPIOG) || defined (GPIOH) || defined (GPIOI) || defined (GPIOJ) || defined (GPIOK)
|
||||
|
||||
/** @defgroup GPIO_LL GPIO
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Private types -------------------------------------------------------------*/
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
/* Private constants ---------------------------------------------------------*/
|
||||
/* Private macros ------------------------------------------------------------*/
|
||||
#if defined(USE_FULL_LL_DRIVER)
|
||||
/** @defgroup GPIO_LL_Private_Macros GPIO Private Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
#endif /*USE_FULL_LL_DRIVER*/
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
#if defined(USE_FULL_LL_DRIVER)
|
||||
/** @defgroup GPIO_LL_ES_INIT GPIO Exported Init structures
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief LL GPIO Init Structure definition
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint32_t Pin; /*!< Specifies the GPIO pins to be configured.
|
||||
This parameter can be any value of @ref GPIO_LL_EC_PIN */
|
||||
|
||||
uint32_t Mode; /*!< Specifies the operating mode for the selected pins.
|
||||
This parameter can be a value of @ref GPIO_LL_EC_MODE.
|
||||
|
||||
GPIO HW configuration can be modified afterwards using unitary function @ref LL_GPIO_SetPinMode().*/
|
||||
|
||||
uint32_t Speed; /*!< Specifies the speed for the selected pins.
|
||||
This parameter can be a value of @ref GPIO_LL_EC_SPEED.
|
||||
|
||||
GPIO HW configuration can be modified afterwards using unitary function @ref LL_GPIO_SetPinSpeed().*/
|
||||
|
||||
uint32_t OutputType; /*!< Specifies the operating output type for the selected pins.
|
||||
This parameter can be a value of @ref GPIO_LL_EC_OUTPUT.
|
||||
|
||||
GPIO HW configuration can be modified afterwards using unitary function @ref LL_GPIO_SetPinOutputType().*/
|
||||
|
||||
uint32_t Pull; /*!< Specifies the operating Pull-up/Pull down for the selected pins.
|
||||
This parameter can be a value of @ref GPIO_LL_EC_PULL.
|
||||
|
||||
GPIO HW configuration can be modified afterwards using unitary function @ref LL_GPIO_SetPinPull().*/
|
||||
|
||||
uint32_t Alternate; /*!< Specifies the Peripheral to be connected to the selected pins.
|
||||
This parameter can be a value of @ref GPIO_LL_EC_AF.
|
||||
|
||||
GPIO HW configuration can be modified afterwards using unitary function @ref LL_GPIO_SetAFPin_0_7() and LL_GPIO_SetAFPin_8_15().*/
|
||||
} LL_GPIO_InitTypeDef;
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
#endif /* USE_FULL_LL_DRIVER */
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/** @defgroup GPIO_LL_Exported_Constants GPIO Exported Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup GPIO_LL_EC_PIN PIN
|
||||
* @{
|
||||
*/
|
||||
#define LL_GPIO_PIN_0 GPIO_BSRR_BS_0 /*!< Select pin 0 */
|
||||
#define LL_GPIO_PIN_1 GPIO_BSRR_BS_1 /*!< Select pin 1 */
|
||||
#define LL_GPIO_PIN_2 GPIO_BSRR_BS_2 /*!< Select pin 2 */
|
||||
#define LL_GPIO_PIN_3 GPIO_BSRR_BS_3 /*!< Select pin 3 */
|
||||
#define LL_GPIO_PIN_4 GPIO_BSRR_BS_4 /*!< Select pin 4 */
|
||||
#define LL_GPIO_PIN_5 GPIO_BSRR_BS_5 /*!< Select pin 5 */
|
||||
#define LL_GPIO_PIN_6 GPIO_BSRR_BS_6 /*!< Select pin 6 */
|
||||
#define LL_GPIO_PIN_7 GPIO_BSRR_BS_7 /*!< Select pin 7 */
|
||||
#define LL_GPIO_PIN_8 GPIO_BSRR_BS_8 /*!< Select pin 8 */
|
||||
#define LL_GPIO_PIN_9 GPIO_BSRR_BS_9 /*!< Select pin 9 */
|
||||
#define LL_GPIO_PIN_10 GPIO_BSRR_BS_10 /*!< Select pin 10 */
|
||||
#define LL_GPIO_PIN_11 GPIO_BSRR_BS_11 /*!< Select pin 11 */
|
||||
#define LL_GPIO_PIN_12 GPIO_BSRR_BS_12 /*!< Select pin 12 */
|
||||
#define LL_GPIO_PIN_13 GPIO_BSRR_BS_13 /*!< Select pin 13 */
|
||||
#define LL_GPIO_PIN_14 GPIO_BSRR_BS_14 /*!< Select pin 14 */
|
||||
#define LL_GPIO_PIN_15 GPIO_BSRR_BS_15 /*!< Select pin 15 */
|
||||
#define LL_GPIO_PIN_ALL (GPIO_BSRR_BS_0 | GPIO_BSRR_BS_1 | GPIO_BSRR_BS_2 | \
|
||||
GPIO_BSRR_BS_3 | GPIO_BSRR_BS_4 | GPIO_BSRR_BS_5 | \
|
||||
GPIO_BSRR_BS_6 | GPIO_BSRR_BS_7 | GPIO_BSRR_BS_8 | \
|
||||
GPIO_BSRR_BS_9 | GPIO_BSRR_BS_10 | GPIO_BSRR_BS_11 | \
|
||||
GPIO_BSRR_BS_12 | GPIO_BSRR_BS_13 | GPIO_BSRR_BS_14 | \
|
||||
GPIO_BSRR_BS_15) /*!< Select all pins */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup GPIO_LL_EC_MODE Mode
|
||||
* @{
|
||||
*/
|
||||
#define LL_GPIO_MODE_INPUT (0x00000000U) /*!< Select input mode */
|
||||
#define LL_GPIO_MODE_OUTPUT GPIO_MODER_MODER0_0 /*!< Select output mode */
|
||||
#define LL_GPIO_MODE_ALTERNATE GPIO_MODER_MODER0_1 /*!< Select alternate function mode */
|
||||
#define LL_GPIO_MODE_ANALOG GPIO_MODER_MODER0 /*!< Select analog mode */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup GPIO_LL_EC_OUTPUT Output Type
|
||||
* @{
|
||||
*/
|
||||
#define LL_GPIO_OUTPUT_PUSHPULL (0x00000000U) /*!< Select push-pull as output type */
|
||||
#define LL_GPIO_OUTPUT_OPENDRAIN GPIO_OTYPER_OT_0 /*!< Select open-drain as output type */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup GPIO_LL_EC_SPEED Output Speed
|
||||
* @{
|
||||
*/
|
||||
#define LL_GPIO_SPEED_FREQ_LOW (0x00000000U) /*!< Select I/O low output speed */
|
||||
#define LL_GPIO_SPEED_FREQ_MEDIUM GPIO_OSPEEDER_OSPEEDR0_0 /*!< Select I/O medium output speed */
|
||||
#define LL_GPIO_SPEED_FREQ_HIGH GPIO_OSPEEDER_OSPEEDR0_1 /*!< Select I/O fast output speed */
|
||||
#define LL_GPIO_SPEED_FREQ_VERY_HIGH GPIO_OSPEEDER_OSPEEDR0 /*!< Select I/O high output speed */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup GPIO_LL_EC_PULL Pull Up Pull Down
|
||||
* @{
|
||||
*/
|
||||
#define LL_GPIO_PULL_NO (0x00000000U) /*!< Select I/O no pull */
|
||||
#define LL_GPIO_PULL_UP GPIO_PUPDR_PUPDR0_0 /*!< Select I/O pull up */
|
||||
#define LL_GPIO_PULL_DOWN GPIO_PUPDR_PUPDR0_1 /*!< Select I/O pull down */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup GPIO_LL_EC_AF Alternate Function
|
||||
* @{
|
||||
*/
|
||||
#define LL_GPIO_AF_0 (0x0000000U) /*!< Select alternate function 0 */
|
||||
#define LL_GPIO_AF_1 (0x0000001U) /*!< Select alternate function 1 */
|
||||
#define LL_GPIO_AF_2 (0x0000002U) /*!< Select alternate function 2 */
|
||||
#define LL_GPIO_AF_3 (0x0000003U) /*!< Select alternate function 3 */
|
||||
#define LL_GPIO_AF_4 (0x0000004U) /*!< Select alternate function 4 */
|
||||
#define LL_GPIO_AF_5 (0x0000005U) /*!< Select alternate function 5 */
|
||||
#define LL_GPIO_AF_6 (0x0000006U) /*!< Select alternate function 6 */
|
||||
#define LL_GPIO_AF_7 (0x0000007U) /*!< Select alternate function 7 */
|
||||
#define LL_GPIO_AF_8 (0x0000008U) /*!< Select alternate function 8 */
|
||||
#define LL_GPIO_AF_9 (0x0000009U) /*!< Select alternate function 9 */
|
||||
#define LL_GPIO_AF_10 (0x000000AU) /*!< Select alternate function 10 */
|
||||
#define LL_GPIO_AF_11 (0x000000BU) /*!< Select alternate function 11 */
|
||||
#define LL_GPIO_AF_12 (0x000000CU) /*!< Select alternate function 12 */
|
||||
#define LL_GPIO_AF_13 (0x000000DU) /*!< Select alternate function 13 */
|
||||
#define LL_GPIO_AF_14 (0x000000EU) /*!< Select alternate function 14 */
|
||||
#define LL_GPIO_AF_15 (0x000000FU) /*!< Select alternate function 15 */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/** @defgroup GPIO_LL_Exported_Macros GPIO Exported Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup GPIO_LL_EM_WRITE_READ Common Write and read registers Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Write a value in GPIO register
|
||||
* @param __INSTANCE__ GPIO Instance
|
||||
* @param __REG__ Register to be written
|
||||
* @param __VALUE__ Value to be written in the register
|
||||
* @retval None
|
||||
*/
|
||||
#define LL_GPIO_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__))
|
||||
|
||||
/**
|
||||
* @brief Read a value in GPIO register
|
||||
* @param __INSTANCE__ GPIO Instance
|
||||
* @param __REG__ Register to be read
|
||||
* @retval Register value
|
||||
*/
|
||||
#define LL_GPIO_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @defgroup GPIO_LL_Exported_Functions GPIO Exported Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup GPIO_LL_EF_Port_Configuration Port Configuration
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Configure gpio mode for a dedicated pin on dedicated port.
|
||||
* @note I/O mode can be Input mode, General purpose output, Alternate function mode or Analog.
|
||||
* @note Warning: only one pin can be passed as parameter.
|
||||
* @rmtoll MODER MODEy LL_GPIO_SetPinMode
|
||||
* @param GPIOx GPIO Port
|
||||
* @param Pin This parameter can be one of the following values:
|
||||
* @arg @ref LL_GPIO_PIN_0
|
||||
* @arg @ref LL_GPIO_PIN_1
|
||||
* @arg @ref LL_GPIO_PIN_2
|
||||
* @arg @ref LL_GPIO_PIN_3
|
||||
* @arg @ref LL_GPIO_PIN_4
|
||||
* @arg @ref LL_GPIO_PIN_5
|
||||
* @arg @ref LL_GPIO_PIN_6
|
||||
* @arg @ref LL_GPIO_PIN_7
|
||||
* @arg @ref LL_GPIO_PIN_8
|
||||
* @arg @ref LL_GPIO_PIN_9
|
||||
* @arg @ref LL_GPIO_PIN_10
|
||||
* @arg @ref LL_GPIO_PIN_11
|
||||
* @arg @ref LL_GPIO_PIN_12
|
||||
* @arg @ref LL_GPIO_PIN_13
|
||||
* @arg @ref LL_GPIO_PIN_14
|
||||
* @arg @ref LL_GPIO_PIN_15
|
||||
* @param Mode This parameter can be one of the following values:
|
||||
* @arg @ref LL_GPIO_MODE_INPUT
|
||||
* @arg @ref LL_GPIO_MODE_OUTPUT
|
||||
* @arg @ref LL_GPIO_MODE_ALTERNATE
|
||||
* @arg @ref LL_GPIO_MODE_ANALOG
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_GPIO_SetPinMode(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Mode)
|
||||
{
|
||||
MODIFY_REG(GPIOx->MODER, (GPIO_MODER_MODER0 << (POSITION_VAL(Pin) * 2U)), (Mode << (POSITION_VAL(Pin) * 2U)));
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Return gpio mode for a dedicated pin on dedicated port.
|
||||
* @note I/O mode can be Input mode, General purpose output, Alternate function mode or Analog.
|
||||
* @note Warning: only one pin can be passed as parameter.
|
||||
* @rmtoll MODER MODEy LL_GPIO_GetPinMode
|
||||
* @param GPIOx GPIO Port
|
||||
* @param Pin This parameter can be one of the following values:
|
||||
* @arg @ref LL_GPIO_PIN_0
|
||||
* @arg @ref LL_GPIO_PIN_1
|
||||
* @arg @ref LL_GPIO_PIN_2
|
||||
* @arg @ref LL_GPIO_PIN_3
|
||||
* @arg @ref LL_GPIO_PIN_4
|
||||
* @arg @ref LL_GPIO_PIN_5
|
||||
* @arg @ref LL_GPIO_PIN_6
|
||||
* @arg @ref LL_GPIO_PIN_7
|
||||
* @arg @ref LL_GPIO_PIN_8
|
||||
* @arg @ref LL_GPIO_PIN_9
|
||||
* @arg @ref LL_GPIO_PIN_10
|
||||
* @arg @ref LL_GPIO_PIN_11
|
||||
* @arg @ref LL_GPIO_PIN_12
|
||||
* @arg @ref LL_GPIO_PIN_13
|
||||
* @arg @ref LL_GPIO_PIN_14
|
||||
* @arg @ref LL_GPIO_PIN_15
|
||||
* @retval Returned value can be one of the following values:
|
||||
* @arg @ref LL_GPIO_MODE_INPUT
|
||||
* @arg @ref LL_GPIO_MODE_OUTPUT
|
||||
* @arg @ref LL_GPIO_MODE_ALTERNATE
|
||||
* @arg @ref LL_GPIO_MODE_ANALOG
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_GPIO_GetPinMode(GPIO_TypeDef *GPIOx, uint32_t Pin)
|
||||
{
|
||||
return (uint32_t)(READ_BIT(GPIOx->MODER,
|
||||
(GPIO_MODER_MODER0 << (POSITION_VAL(Pin) * 2U))) >> (POSITION_VAL(Pin) * 2U));
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Configure gpio output type for several pins on dedicated port.
|
||||
* @note Output type as to be set when gpio pin is in output or
|
||||
* alternate modes. Possible type are Push-pull or Open-drain.
|
||||
* @rmtoll OTYPER OTy LL_GPIO_SetPinOutputType
|
||||
* @param GPIOx GPIO Port
|
||||
* @param PinMask This parameter can be a combination of the following values:
|
||||
* @arg @ref LL_GPIO_PIN_0
|
||||
* @arg @ref LL_GPIO_PIN_1
|
||||
* @arg @ref LL_GPIO_PIN_2
|
||||
* @arg @ref LL_GPIO_PIN_3
|
||||
* @arg @ref LL_GPIO_PIN_4
|
||||
* @arg @ref LL_GPIO_PIN_5
|
||||
* @arg @ref LL_GPIO_PIN_6
|
||||
* @arg @ref LL_GPIO_PIN_7
|
||||
* @arg @ref LL_GPIO_PIN_8
|
||||
* @arg @ref LL_GPIO_PIN_9
|
||||
* @arg @ref LL_GPIO_PIN_10
|
||||
* @arg @ref LL_GPIO_PIN_11
|
||||
* @arg @ref LL_GPIO_PIN_12
|
||||
* @arg @ref LL_GPIO_PIN_13
|
||||
* @arg @ref LL_GPIO_PIN_14
|
||||
* @arg @ref LL_GPIO_PIN_15
|
||||
* @arg @ref LL_GPIO_PIN_ALL
|
||||
* @param OutputType This parameter can be one of the following values:
|
||||
* @arg @ref LL_GPIO_OUTPUT_PUSHPULL
|
||||
* @arg @ref LL_GPIO_OUTPUT_OPENDRAIN
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_GPIO_SetPinOutputType(GPIO_TypeDef *GPIOx, uint32_t PinMask, uint32_t OutputType)
|
||||
{
|
||||
MODIFY_REG(GPIOx->OTYPER, PinMask, (PinMask * OutputType));
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Return gpio output type for several pins on dedicated port.
|
||||
* @note Output type as to be set when gpio pin is in output or
|
||||
* alternate modes. Possible type are Push-pull or Open-drain.
|
||||
* @note Warning: only one pin can be passed as parameter.
|
||||
* @rmtoll OTYPER OTy LL_GPIO_GetPinOutputType
|
||||
* @param GPIOx GPIO Port
|
||||
* @param Pin This parameter can be one of the following values:
|
||||
* @arg @ref LL_GPIO_PIN_0
|
||||
* @arg @ref LL_GPIO_PIN_1
|
||||
* @arg @ref LL_GPIO_PIN_2
|
||||
* @arg @ref LL_GPIO_PIN_3
|
||||
* @arg @ref LL_GPIO_PIN_4
|
||||
* @arg @ref LL_GPIO_PIN_5
|
||||
* @arg @ref LL_GPIO_PIN_6
|
||||
* @arg @ref LL_GPIO_PIN_7
|
||||
* @arg @ref LL_GPIO_PIN_8
|
||||
* @arg @ref LL_GPIO_PIN_9
|
||||
* @arg @ref LL_GPIO_PIN_10
|
||||
* @arg @ref LL_GPIO_PIN_11
|
||||
* @arg @ref LL_GPIO_PIN_12
|
||||
* @arg @ref LL_GPIO_PIN_13
|
||||
* @arg @ref LL_GPIO_PIN_14
|
||||
* @arg @ref LL_GPIO_PIN_15
|
||||
* @arg @ref LL_GPIO_PIN_ALL
|
||||
* @retval Returned value can be one of the following values:
|
||||
* @arg @ref LL_GPIO_OUTPUT_PUSHPULL
|
||||
* @arg @ref LL_GPIO_OUTPUT_OPENDRAIN
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_GPIO_GetPinOutputType(GPIO_TypeDef *GPIOx, uint32_t Pin)
|
||||
{
|
||||
return (uint32_t)(READ_BIT(GPIOx->OTYPER, Pin) >> POSITION_VAL(Pin));
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Configure gpio speed for a dedicated pin on dedicated port.
|
||||
* @note I/O speed can be Low, Medium, Fast or High speed.
|
||||
* @note Warning: only one pin can be passed as parameter.
|
||||
* @note Refer to datasheet for frequency specifications and the power
|
||||
* supply and load conditions for each speed.
|
||||
* @rmtoll OSPEEDR OSPEEDy LL_GPIO_SetPinSpeed
|
||||
* @param GPIOx GPIO Port
|
||||
* @param Pin This parameter can be one of the following values:
|
||||
* @arg @ref LL_GPIO_PIN_0
|
||||
* @arg @ref LL_GPIO_PIN_1
|
||||
* @arg @ref LL_GPIO_PIN_2
|
||||
* @arg @ref LL_GPIO_PIN_3
|
||||
* @arg @ref LL_GPIO_PIN_4
|
||||
* @arg @ref LL_GPIO_PIN_5
|
||||
* @arg @ref LL_GPIO_PIN_6
|
||||
* @arg @ref LL_GPIO_PIN_7
|
||||
* @arg @ref LL_GPIO_PIN_8
|
||||
* @arg @ref LL_GPIO_PIN_9
|
||||
* @arg @ref LL_GPIO_PIN_10
|
||||
* @arg @ref LL_GPIO_PIN_11
|
||||
* @arg @ref LL_GPIO_PIN_12
|
||||
* @arg @ref LL_GPIO_PIN_13
|
||||
* @arg @ref LL_GPIO_PIN_14
|
||||
* @arg @ref LL_GPIO_PIN_15
|
||||
* @param Speed This parameter can be one of the following values:
|
||||
* @arg @ref LL_GPIO_SPEED_FREQ_LOW
|
||||
* @arg @ref LL_GPIO_SPEED_FREQ_MEDIUM
|
||||
* @arg @ref LL_GPIO_SPEED_FREQ_HIGH
|
||||
* @arg @ref LL_GPIO_SPEED_FREQ_VERY_HIGH
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_GPIO_SetPinSpeed(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Speed)
|
||||
{
|
||||
MODIFY_REG(GPIOx->OSPEEDR, (GPIO_OSPEEDER_OSPEEDR0 << (POSITION_VAL(Pin) * 2U)),
|
||||
(Speed << (POSITION_VAL(Pin) * 2U)));
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Return gpio speed for a dedicated pin on dedicated port.
|
||||
* @note I/O speed can be Low, Medium, Fast or High speed.
|
||||
* @note Warning: only one pin can be passed as parameter.
|
||||
* @note Refer to datasheet for frequency specifications and the power
|
||||
* supply and load conditions for each speed.
|
||||
* @rmtoll OSPEEDR OSPEEDy LL_GPIO_GetPinSpeed
|
||||
* @param GPIOx GPIO Port
|
||||
* @param Pin This parameter can be one of the following values:
|
||||
* @arg @ref LL_GPIO_PIN_0
|
||||
* @arg @ref LL_GPIO_PIN_1
|
||||
* @arg @ref LL_GPIO_PIN_2
|
||||
* @arg @ref LL_GPIO_PIN_3
|
||||
* @arg @ref LL_GPIO_PIN_4
|
||||
* @arg @ref LL_GPIO_PIN_5
|
||||
* @arg @ref LL_GPIO_PIN_6
|
||||
* @arg @ref LL_GPIO_PIN_7
|
||||
* @arg @ref LL_GPIO_PIN_8
|
||||
* @arg @ref LL_GPIO_PIN_9
|
||||
* @arg @ref LL_GPIO_PIN_10
|
||||
* @arg @ref LL_GPIO_PIN_11
|
||||
* @arg @ref LL_GPIO_PIN_12
|
||||
* @arg @ref LL_GPIO_PIN_13
|
||||
* @arg @ref LL_GPIO_PIN_14
|
||||
* @arg @ref LL_GPIO_PIN_15
|
||||
* @retval Returned value can be one of the following values:
|
||||
* @arg @ref LL_GPIO_SPEED_FREQ_LOW
|
||||
* @arg @ref LL_GPIO_SPEED_FREQ_MEDIUM
|
||||
* @arg @ref LL_GPIO_SPEED_FREQ_HIGH
|
||||
* @arg @ref LL_GPIO_SPEED_FREQ_VERY_HIGH
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_GPIO_GetPinSpeed(GPIO_TypeDef *GPIOx, uint32_t Pin)
|
||||
{
|
||||
return (uint32_t)(READ_BIT(GPIOx->OSPEEDR,
|
||||
(GPIO_OSPEEDER_OSPEEDR0 << (POSITION_VAL(Pin) * 2U))) >> (POSITION_VAL(Pin) * 2U));
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Configure gpio pull-up or pull-down for a dedicated pin on a dedicated port.
|
||||
* @note Warning: only one pin can be passed as parameter.
|
||||
* @rmtoll PUPDR PUPDy LL_GPIO_SetPinPull
|
||||
* @param GPIOx GPIO Port
|
||||
* @param Pin This parameter can be one of the following values:
|
||||
* @arg @ref LL_GPIO_PIN_0
|
||||
* @arg @ref LL_GPIO_PIN_1
|
||||
* @arg @ref LL_GPIO_PIN_2
|
||||
* @arg @ref LL_GPIO_PIN_3
|
||||
* @arg @ref LL_GPIO_PIN_4
|
||||
* @arg @ref LL_GPIO_PIN_5
|
||||
* @arg @ref LL_GPIO_PIN_6
|
||||
* @arg @ref LL_GPIO_PIN_7
|
||||
* @arg @ref LL_GPIO_PIN_8
|
||||
* @arg @ref LL_GPIO_PIN_9
|
||||
* @arg @ref LL_GPIO_PIN_10
|
||||
* @arg @ref LL_GPIO_PIN_11
|
||||
* @arg @ref LL_GPIO_PIN_12
|
||||
* @arg @ref LL_GPIO_PIN_13
|
||||
* @arg @ref LL_GPIO_PIN_14
|
||||
* @arg @ref LL_GPIO_PIN_15
|
||||
* @param Pull This parameter can be one of the following values:
|
||||
* @arg @ref LL_GPIO_PULL_NO
|
||||
* @arg @ref LL_GPIO_PULL_UP
|
||||
* @arg @ref LL_GPIO_PULL_DOWN
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_GPIO_SetPinPull(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Pull)
|
||||
{
|
||||
MODIFY_REG(GPIOx->PUPDR, (GPIO_PUPDR_PUPDR0 << (POSITION_VAL(Pin) * 2U)), (Pull << (POSITION_VAL(Pin) * 2U)));
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Return gpio pull-up or pull-down for a dedicated pin on a dedicated port
|
||||
* @note Warning: only one pin can be passed as parameter.
|
||||
* @rmtoll PUPDR PUPDy LL_GPIO_GetPinPull
|
||||
* @param GPIOx GPIO Port
|
||||
* @param Pin This parameter can be one of the following values:
|
||||
* @arg @ref LL_GPIO_PIN_0
|
||||
* @arg @ref LL_GPIO_PIN_1
|
||||
* @arg @ref LL_GPIO_PIN_2
|
||||
* @arg @ref LL_GPIO_PIN_3
|
||||
* @arg @ref LL_GPIO_PIN_4
|
||||
* @arg @ref LL_GPIO_PIN_5
|
||||
* @arg @ref LL_GPIO_PIN_6
|
||||
* @arg @ref LL_GPIO_PIN_7
|
||||
* @arg @ref LL_GPIO_PIN_8
|
||||
* @arg @ref LL_GPIO_PIN_9
|
||||
* @arg @ref LL_GPIO_PIN_10
|
||||
* @arg @ref LL_GPIO_PIN_11
|
||||
* @arg @ref LL_GPIO_PIN_12
|
||||
* @arg @ref LL_GPIO_PIN_13
|
||||
* @arg @ref LL_GPIO_PIN_14
|
||||
* @arg @ref LL_GPIO_PIN_15
|
||||
* @retval Returned value can be one of the following values:
|
||||
* @arg @ref LL_GPIO_PULL_NO
|
||||
* @arg @ref LL_GPIO_PULL_UP
|
||||
* @arg @ref LL_GPIO_PULL_DOWN
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_GPIO_GetPinPull(GPIO_TypeDef *GPIOx, uint32_t Pin)
|
||||
{
|
||||
return (uint32_t)(READ_BIT(GPIOx->PUPDR,
|
||||
(GPIO_PUPDR_PUPDR0 << (POSITION_VAL(Pin) * 2U))) >> (POSITION_VAL(Pin) * 2U));
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Configure gpio alternate function of a dedicated pin from 0 to 7 for a dedicated port.
|
||||
* @note Possible values are from AF0 to AF15 depending on target.
|
||||
* @note Warning: only one pin can be passed as parameter.
|
||||
* @rmtoll AFRL AFSELy LL_GPIO_SetAFPin_0_7
|
||||
* @param GPIOx GPIO Port
|
||||
* @param Pin This parameter can be one of the following values:
|
||||
* @arg @ref LL_GPIO_PIN_0
|
||||
* @arg @ref LL_GPIO_PIN_1
|
||||
* @arg @ref LL_GPIO_PIN_2
|
||||
* @arg @ref LL_GPIO_PIN_3
|
||||
* @arg @ref LL_GPIO_PIN_4
|
||||
* @arg @ref LL_GPIO_PIN_5
|
||||
* @arg @ref LL_GPIO_PIN_6
|
||||
* @arg @ref LL_GPIO_PIN_7
|
||||
* @param Alternate This parameter can be one of the following values:
|
||||
* @arg @ref LL_GPIO_AF_0
|
||||
* @arg @ref LL_GPIO_AF_1
|
||||
* @arg @ref LL_GPIO_AF_2
|
||||
* @arg @ref LL_GPIO_AF_3
|
||||
* @arg @ref LL_GPIO_AF_4
|
||||
* @arg @ref LL_GPIO_AF_5
|
||||
* @arg @ref LL_GPIO_AF_6
|
||||
* @arg @ref LL_GPIO_AF_7
|
||||
* @arg @ref LL_GPIO_AF_8
|
||||
* @arg @ref LL_GPIO_AF_9
|
||||
* @arg @ref LL_GPIO_AF_10
|
||||
* @arg @ref LL_GPIO_AF_11
|
||||
* @arg @ref LL_GPIO_AF_12
|
||||
* @arg @ref LL_GPIO_AF_13
|
||||
* @arg @ref LL_GPIO_AF_14
|
||||
* @arg @ref LL_GPIO_AF_15
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_GPIO_SetAFPin_0_7(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Alternate)
|
||||
{
|
||||
MODIFY_REG(GPIOx->AFR[0], (GPIO_AFRL_AFRL0 << (POSITION_VAL(Pin) * 4U)),
|
||||
(Alternate << (POSITION_VAL(Pin) * 4U)));
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Return gpio alternate function of a dedicated pin from 0 to 7 for a dedicated port.
|
||||
* @rmtoll AFRL AFSELy LL_GPIO_GetAFPin_0_7
|
||||
* @param GPIOx GPIO Port
|
||||
* @param Pin This parameter can be one of the following values:
|
||||
* @arg @ref LL_GPIO_PIN_0
|
||||
* @arg @ref LL_GPIO_PIN_1
|
||||
* @arg @ref LL_GPIO_PIN_2
|
||||
* @arg @ref LL_GPIO_PIN_3
|
||||
* @arg @ref LL_GPIO_PIN_4
|
||||
* @arg @ref LL_GPIO_PIN_5
|
||||
* @arg @ref LL_GPIO_PIN_6
|
||||
* @arg @ref LL_GPIO_PIN_7
|
||||
* @retval Returned value can be one of the following values:
|
||||
* @arg @ref LL_GPIO_AF_0
|
||||
* @arg @ref LL_GPIO_AF_1
|
||||
* @arg @ref LL_GPIO_AF_2
|
||||
* @arg @ref LL_GPIO_AF_3
|
||||
* @arg @ref LL_GPIO_AF_4
|
||||
* @arg @ref LL_GPIO_AF_5
|
||||
* @arg @ref LL_GPIO_AF_6
|
||||
* @arg @ref LL_GPIO_AF_7
|
||||
* @arg @ref LL_GPIO_AF_8
|
||||
* @arg @ref LL_GPIO_AF_9
|
||||
* @arg @ref LL_GPIO_AF_10
|
||||
* @arg @ref LL_GPIO_AF_11
|
||||
* @arg @ref LL_GPIO_AF_12
|
||||
* @arg @ref LL_GPIO_AF_13
|
||||
* @arg @ref LL_GPIO_AF_14
|
||||
* @arg @ref LL_GPIO_AF_15
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_GPIO_GetAFPin_0_7(GPIO_TypeDef *GPIOx, uint32_t Pin)
|
||||
{
|
||||
return (uint32_t)(READ_BIT(GPIOx->AFR[0],
|
||||
(GPIO_AFRL_AFRL0 << (POSITION_VAL(Pin) * 4U))) >> (POSITION_VAL(Pin) * 4U));
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Configure gpio alternate function of a dedicated pin from 8 to 15 for a dedicated port.
|
||||
* @note Possible values are from AF0 to AF15 depending on target.
|
||||
* @note Warning: only one pin can be passed as parameter.
|
||||
* @rmtoll AFRH AFSELy LL_GPIO_SetAFPin_8_15
|
||||
* @param GPIOx GPIO Port
|
||||
* @param Pin This parameter can be one of the following values:
|
||||
* @arg @ref LL_GPIO_PIN_8
|
||||
* @arg @ref LL_GPIO_PIN_9
|
||||
* @arg @ref LL_GPIO_PIN_10
|
||||
* @arg @ref LL_GPIO_PIN_11
|
||||
* @arg @ref LL_GPIO_PIN_12
|
||||
* @arg @ref LL_GPIO_PIN_13
|
||||
* @arg @ref LL_GPIO_PIN_14
|
||||
* @arg @ref LL_GPIO_PIN_15
|
||||
* @param Alternate This parameter can be one of the following values:
|
||||
* @arg @ref LL_GPIO_AF_0
|
||||
* @arg @ref LL_GPIO_AF_1
|
||||
* @arg @ref LL_GPIO_AF_2
|
||||
* @arg @ref LL_GPIO_AF_3
|
||||
* @arg @ref LL_GPIO_AF_4
|
||||
* @arg @ref LL_GPIO_AF_5
|
||||
* @arg @ref LL_GPIO_AF_6
|
||||
* @arg @ref LL_GPIO_AF_7
|
||||
* @arg @ref LL_GPIO_AF_8
|
||||
* @arg @ref LL_GPIO_AF_9
|
||||
* @arg @ref LL_GPIO_AF_10
|
||||
* @arg @ref LL_GPIO_AF_11
|
||||
* @arg @ref LL_GPIO_AF_12
|
||||
* @arg @ref LL_GPIO_AF_13
|
||||
* @arg @ref LL_GPIO_AF_14
|
||||
* @arg @ref LL_GPIO_AF_15
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_GPIO_SetAFPin_8_15(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Alternate)
|
||||
{
|
||||
MODIFY_REG(GPIOx->AFR[1], (GPIO_AFRH_AFRH0 << (POSITION_VAL(Pin >> 8U) * 4U)),
|
||||
(Alternate << (POSITION_VAL(Pin >> 8U) * 4U)));
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Return gpio alternate function of a dedicated pin from 8 to 15 for a dedicated port.
|
||||
* @note Possible values are from AF0 to AF15 depending on target.
|
||||
* @rmtoll AFRH AFSELy LL_GPIO_GetAFPin_8_15
|
||||
* @param GPIOx GPIO Port
|
||||
* @param Pin This parameter can be one of the following values:
|
||||
* @arg @ref LL_GPIO_PIN_8
|
||||
* @arg @ref LL_GPIO_PIN_9
|
||||
* @arg @ref LL_GPIO_PIN_10
|
||||
* @arg @ref LL_GPIO_PIN_11
|
||||
* @arg @ref LL_GPIO_PIN_12
|
||||
* @arg @ref LL_GPIO_PIN_13
|
||||
* @arg @ref LL_GPIO_PIN_14
|
||||
* @arg @ref LL_GPIO_PIN_15
|
||||
* @retval Returned value can be one of the following values:
|
||||
* @arg @ref LL_GPIO_AF_0
|
||||
* @arg @ref LL_GPIO_AF_1
|
||||
* @arg @ref LL_GPIO_AF_2
|
||||
* @arg @ref LL_GPIO_AF_3
|
||||
* @arg @ref LL_GPIO_AF_4
|
||||
* @arg @ref LL_GPIO_AF_5
|
||||
* @arg @ref LL_GPIO_AF_6
|
||||
* @arg @ref LL_GPIO_AF_7
|
||||
* @arg @ref LL_GPIO_AF_8
|
||||
* @arg @ref LL_GPIO_AF_9
|
||||
* @arg @ref LL_GPIO_AF_10
|
||||
* @arg @ref LL_GPIO_AF_11
|
||||
* @arg @ref LL_GPIO_AF_12
|
||||
* @arg @ref LL_GPIO_AF_13
|
||||
* @arg @ref LL_GPIO_AF_14
|
||||
* @arg @ref LL_GPIO_AF_15
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_GPIO_GetAFPin_8_15(GPIO_TypeDef *GPIOx, uint32_t Pin)
|
||||
{
|
||||
return (uint32_t)(READ_BIT(GPIOx->AFR[1],
|
||||
(GPIO_AFRH_AFRH0 << (POSITION_VAL(Pin >> 8U) * 4U))) >> (POSITION_VAL(Pin >> 8U) * 4U));
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
* @brief Lock configuration of several pins for a dedicated port.
|
||||
* @note When the lock sequence has been applied on a port bit, the
|
||||
* value of this port bit can no longer be modified until the
|
||||
* next reset.
|
||||
* @note Each lock bit freezes a specific configuration register
|
||||
* (control and alternate function registers).
|
||||
* @rmtoll LCKR LCKK LL_GPIO_LockPin
|
||||
* @param GPIOx GPIO Port
|
||||
* @param PinMask This parameter can be a combination of the following values:
|
||||
* @arg @ref LL_GPIO_PIN_0
|
||||
* @arg @ref LL_GPIO_PIN_1
|
||||
* @arg @ref LL_GPIO_PIN_2
|
||||
* @arg @ref LL_GPIO_PIN_3
|
||||
* @arg @ref LL_GPIO_PIN_4
|
||||
* @arg @ref LL_GPIO_PIN_5
|
||||
* @arg @ref LL_GPIO_PIN_6
|
||||
* @arg @ref LL_GPIO_PIN_7
|
||||
* @arg @ref LL_GPIO_PIN_8
|
||||
* @arg @ref LL_GPIO_PIN_9
|
||||
* @arg @ref LL_GPIO_PIN_10
|
||||
* @arg @ref LL_GPIO_PIN_11
|
||||
* @arg @ref LL_GPIO_PIN_12
|
||||
* @arg @ref LL_GPIO_PIN_13
|
||||
* @arg @ref LL_GPIO_PIN_14
|
||||
* @arg @ref LL_GPIO_PIN_15
|
||||
* @arg @ref LL_GPIO_PIN_ALL
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_GPIO_LockPin(GPIO_TypeDef *GPIOx, uint32_t PinMask)
|
||||
{
|
||||
__IO uint32_t temp;
|
||||
WRITE_REG(GPIOx->LCKR, GPIO_LCKR_LCKK | PinMask);
|
||||
WRITE_REG(GPIOx->LCKR, PinMask);
|
||||
WRITE_REG(GPIOx->LCKR, GPIO_LCKR_LCKK | PinMask);
|
||||
temp = READ_REG(GPIOx->LCKR);
|
||||
(void) temp;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Return 1 if all pins passed as parameter, of a dedicated port, are locked. else Return 0.
|
||||
* @rmtoll LCKR LCKy LL_GPIO_IsPinLocked
|
||||
* @param GPIOx GPIO Port
|
||||
* @param PinMask This parameter can be a combination of the following values:
|
||||
* @arg @ref LL_GPIO_PIN_0
|
||||
* @arg @ref LL_GPIO_PIN_1
|
||||
* @arg @ref LL_GPIO_PIN_2
|
||||
* @arg @ref LL_GPIO_PIN_3
|
||||
* @arg @ref LL_GPIO_PIN_4
|
||||
* @arg @ref LL_GPIO_PIN_5
|
||||
* @arg @ref LL_GPIO_PIN_6
|
||||
* @arg @ref LL_GPIO_PIN_7
|
||||
* @arg @ref LL_GPIO_PIN_8
|
||||
* @arg @ref LL_GPIO_PIN_9
|
||||
* @arg @ref LL_GPIO_PIN_10
|
||||
* @arg @ref LL_GPIO_PIN_11
|
||||
* @arg @ref LL_GPIO_PIN_12
|
||||
* @arg @ref LL_GPIO_PIN_13
|
||||
* @arg @ref LL_GPIO_PIN_14
|
||||
* @arg @ref LL_GPIO_PIN_15
|
||||
* @arg @ref LL_GPIO_PIN_ALL
|
||||
* @retval State of bit (1 or 0).
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_GPIO_IsPinLocked(GPIO_TypeDef *GPIOx, uint32_t PinMask)
|
||||
{
|
||||
return (READ_BIT(GPIOx->LCKR, PinMask) == (PinMask));
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Return 1 if one of the pin of a dedicated port is locked. else return 0.
|
||||
* @rmtoll LCKR LCKK LL_GPIO_IsAnyPinLocked
|
||||
* @param GPIOx GPIO Port
|
||||
* @retval State of bit (1 or 0).
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_GPIO_IsAnyPinLocked(GPIO_TypeDef *GPIOx)
|
||||
{
|
||||
return (READ_BIT(GPIOx->LCKR, GPIO_LCKR_LCKK) == (GPIO_LCKR_LCKK));
|
||||
}
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup GPIO_LL_EF_Data_Access Data Access
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Return full input data register value for a dedicated port.
|
||||
* @rmtoll IDR IDy LL_GPIO_ReadInputPort
|
||||
* @param GPIOx GPIO Port
|
||||
* @retval Input data register value of port
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_GPIO_ReadInputPort(GPIO_TypeDef *GPIOx)
|
||||
{
|
||||
return (uint32_t)(READ_REG(GPIOx->IDR));
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Return if input data level for several pins of dedicated port is high or low.
|
||||
* @rmtoll IDR IDy LL_GPIO_IsInputPinSet
|
||||
* @param GPIOx GPIO Port
|
||||
* @param PinMask This parameter can be a combination of the following values:
|
||||
* @arg @ref LL_GPIO_PIN_0
|
||||
* @arg @ref LL_GPIO_PIN_1
|
||||
* @arg @ref LL_GPIO_PIN_2
|
||||
* @arg @ref LL_GPIO_PIN_3
|
||||
* @arg @ref LL_GPIO_PIN_4
|
||||
* @arg @ref LL_GPIO_PIN_5
|
||||
* @arg @ref LL_GPIO_PIN_6
|
||||
* @arg @ref LL_GPIO_PIN_7
|
||||
* @arg @ref LL_GPIO_PIN_8
|
||||
* @arg @ref LL_GPIO_PIN_9
|
||||
* @arg @ref LL_GPIO_PIN_10
|
||||
* @arg @ref LL_GPIO_PIN_11
|
||||
* @arg @ref LL_GPIO_PIN_12
|
||||
* @arg @ref LL_GPIO_PIN_13
|
||||
* @arg @ref LL_GPIO_PIN_14
|
||||
* @arg @ref LL_GPIO_PIN_15
|
||||
* @arg @ref LL_GPIO_PIN_ALL
|
||||
* @retval State of bit (1 or 0).
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_GPIO_IsInputPinSet(GPIO_TypeDef *GPIOx, uint32_t PinMask)
|
||||
{
|
||||
return (READ_BIT(GPIOx->IDR, PinMask) == (PinMask));
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Write output data register for the port.
|
||||
* @rmtoll ODR ODy LL_GPIO_WriteOutputPort
|
||||
* @param GPIOx GPIO Port
|
||||
* @param PortValue Level value for each pin of the port
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_GPIO_WriteOutputPort(GPIO_TypeDef *GPIOx, uint32_t PortValue)
|
||||
{
|
||||
WRITE_REG(GPIOx->ODR, PortValue);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Return full output data register value for a dedicated port.
|
||||
* @rmtoll ODR ODy LL_GPIO_ReadOutputPort
|
||||
* @param GPIOx GPIO Port
|
||||
* @retval Output data register value of port
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_GPIO_ReadOutputPort(GPIO_TypeDef *GPIOx)
|
||||
{
|
||||
return (uint32_t)(READ_REG(GPIOx->ODR));
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Return if input data level for several pins of dedicated port is high or low.
|
||||
* @rmtoll ODR ODy LL_GPIO_IsOutputPinSet
|
||||
* @param GPIOx GPIO Port
|
||||
* @param PinMask This parameter can be a combination of the following values:
|
||||
* @arg @ref LL_GPIO_PIN_0
|
||||
* @arg @ref LL_GPIO_PIN_1
|
||||
* @arg @ref LL_GPIO_PIN_2
|
||||
* @arg @ref LL_GPIO_PIN_3
|
||||
* @arg @ref LL_GPIO_PIN_4
|
||||
* @arg @ref LL_GPIO_PIN_5
|
||||
* @arg @ref LL_GPIO_PIN_6
|
||||
* @arg @ref LL_GPIO_PIN_7
|
||||
* @arg @ref LL_GPIO_PIN_8
|
||||
* @arg @ref LL_GPIO_PIN_9
|
||||
* @arg @ref LL_GPIO_PIN_10
|
||||
* @arg @ref LL_GPIO_PIN_11
|
||||
* @arg @ref LL_GPIO_PIN_12
|
||||
* @arg @ref LL_GPIO_PIN_13
|
||||
* @arg @ref LL_GPIO_PIN_14
|
||||
* @arg @ref LL_GPIO_PIN_15
|
||||
* @arg @ref LL_GPIO_PIN_ALL
|
||||
* @retval State of bit (1 or 0).
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_GPIO_IsOutputPinSet(GPIO_TypeDef *GPIOx, uint32_t PinMask)
|
||||
{
|
||||
return (READ_BIT(GPIOx->ODR, PinMask) == (PinMask));
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Set several pins to high level on dedicated gpio port.
|
||||
* @rmtoll BSRR BSy LL_GPIO_SetOutputPin
|
||||
* @param GPIOx GPIO Port
|
||||
* @param PinMask This parameter can be a combination of the following values:
|
||||
* @arg @ref LL_GPIO_PIN_0
|
||||
* @arg @ref LL_GPIO_PIN_1
|
||||
* @arg @ref LL_GPIO_PIN_2
|
||||
* @arg @ref LL_GPIO_PIN_3
|
||||
* @arg @ref LL_GPIO_PIN_4
|
||||
* @arg @ref LL_GPIO_PIN_5
|
||||
* @arg @ref LL_GPIO_PIN_6
|
||||
* @arg @ref LL_GPIO_PIN_7
|
||||
* @arg @ref LL_GPIO_PIN_8
|
||||
* @arg @ref LL_GPIO_PIN_9
|
||||
* @arg @ref LL_GPIO_PIN_10
|
||||
* @arg @ref LL_GPIO_PIN_11
|
||||
* @arg @ref LL_GPIO_PIN_12
|
||||
* @arg @ref LL_GPIO_PIN_13
|
||||
* @arg @ref LL_GPIO_PIN_14
|
||||
* @arg @ref LL_GPIO_PIN_15
|
||||
* @arg @ref LL_GPIO_PIN_ALL
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_GPIO_SetOutputPin(GPIO_TypeDef *GPIOx, uint32_t PinMask)
|
||||
{
|
||||
WRITE_REG(GPIOx->BSRR, PinMask);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Set several pins to low level on dedicated gpio port.
|
||||
* @rmtoll BSRR BRy LL_GPIO_ResetOutputPin
|
||||
* @param GPIOx GPIO Port
|
||||
* @param PinMask This parameter can be a combination of the following values:
|
||||
* @arg @ref LL_GPIO_PIN_0
|
||||
* @arg @ref LL_GPIO_PIN_1
|
||||
* @arg @ref LL_GPIO_PIN_2
|
||||
* @arg @ref LL_GPIO_PIN_3
|
||||
* @arg @ref LL_GPIO_PIN_4
|
||||
* @arg @ref LL_GPIO_PIN_5
|
||||
* @arg @ref LL_GPIO_PIN_6
|
||||
* @arg @ref LL_GPIO_PIN_7
|
||||
* @arg @ref LL_GPIO_PIN_8
|
||||
* @arg @ref LL_GPIO_PIN_9
|
||||
* @arg @ref LL_GPIO_PIN_10
|
||||
* @arg @ref LL_GPIO_PIN_11
|
||||
* @arg @ref LL_GPIO_PIN_12
|
||||
* @arg @ref LL_GPIO_PIN_13
|
||||
* @arg @ref LL_GPIO_PIN_14
|
||||
* @arg @ref LL_GPIO_PIN_15
|
||||
* @arg @ref LL_GPIO_PIN_ALL
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_GPIO_ResetOutputPin(GPIO_TypeDef *GPIOx, uint32_t PinMask)
|
||||
{
|
||||
WRITE_REG(GPIOx->BSRR, (PinMask << 16));
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Toggle data value for several pin of dedicated port.
|
||||
* @rmtoll ODR ODy LL_GPIO_TogglePin
|
||||
* @param GPIOx GPIO Port
|
||||
* @param PinMask This parameter can be a combination of the following values:
|
||||
* @arg @ref LL_GPIO_PIN_0
|
||||
* @arg @ref LL_GPIO_PIN_1
|
||||
* @arg @ref LL_GPIO_PIN_2
|
||||
* @arg @ref LL_GPIO_PIN_3
|
||||
* @arg @ref LL_GPIO_PIN_4
|
||||
* @arg @ref LL_GPIO_PIN_5
|
||||
* @arg @ref LL_GPIO_PIN_6
|
||||
* @arg @ref LL_GPIO_PIN_7
|
||||
* @arg @ref LL_GPIO_PIN_8
|
||||
* @arg @ref LL_GPIO_PIN_9
|
||||
* @arg @ref LL_GPIO_PIN_10
|
||||
* @arg @ref LL_GPIO_PIN_11
|
||||
* @arg @ref LL_GPIO_PIN_12
|
||||
* @arg @ref LL_GPIO_PIN_13
|
||||
* @arg @ref LL_GPIO_PIN_14
|
||||
* @arg @ref LL_GPIO_PIN_15
|
||||
* @arg @ref LL_GPIO_PIN_ALL
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_GPIO_TogglePin(GPIO_TypeDef *GPIOx, uint32_t PinMask)
|
||||
{
|
||||
uint32_t odr = READ_REG(GPIOx->ODR);
|
||||
WRITE_REG(GPIOx->BSRR, ((odr & PinMask) << 16u) | (~odr & PinMask));
|
||||
}
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#if defined(USE_FULL_LL_DRIVER)
|
||||
/** @defgroup GPIO_LL_EF_Init Initialization and de-initialization functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
ErrorStatus LL_GPIO_DeInit(GPIO_TypeDef *GPIOx);
|
||||
ErrorStatus LL_GPIO_Init(GPIO_TypeDef *GPIOx, LL_GPIO_InitTypeDef *GPIO_InitStruct);
|
||||
void LL_GPIO_StructInit(LL_GPIO_InitTypeDef *GPIO_InitStruct);
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
#endif /* USE_FULL_LL_DRIVER */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#endif /* defined (GPIOA) || defined (GPIOB) || defined (GPIOC) || defined (GPIOD) || defined (GPIOE) || defined (GPIOF) || defined (GPIOG) || defined (GPIOH) || defined (GPIOI) || defined (GPIOJ) || defined (GPIOK) */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __STM32F7xx_LL_GPIO_H */
|
||||
|
||||
1016
project/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_pwr.h
Normal file
1016
project/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_pwr.h
Normal file
File diff suppressed because it is too large
Load Diff
5170
project/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_rcc.h
Normal file
5170
project/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_rcc.h
Normal file
File diff suppressed because it is too large
Load Diff
1018
project/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_system.h
Normal file
1018
project/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_system.h
Normal file
File diff suppressed because it is too large
Load Diff
3797
project/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_usart.h
Normal file
3797
project/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_usart.h
Normal file
File diff suppressed because it is too large
Load Diff
304
project/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_utils.h
Normal file
304
project/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_utils.h
Normal file
@@ -0,0 +1,304 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f7xx_ll_utils.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of UTILS LL module.
|
||||
@verbatim
|
||||
==============================================================================
|
||||
##### How to use this driver #####
|
||||
==============================================================================
|
||||
[..]
|
||||
The LL UTILS driver contains a set of generic APIs that can be
|
||||
used by user:
|
||||
(+) Device electronic signature
|
||||
(+) Timing functions
|
||||
(+) PLL configuration functions
|
||||
|
||||
@endverbatim
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __STM32F7xx_LL_UTILS_H
|
||||
#define __STM32F7xx_LL_UTILS_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f7xx.h"
|
||||
|
||||
/** @addtogroup STM32F7xx_LL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup UTILS_LL UTILS
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Private types -------------------------------------------------------------*/
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
|
||||
/* Private constants ---------------------------------------------------------*/
|
||||
/** @defgroup UTILS_LL_Private_Constants UTILS Private Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Max delay can be used in LL_mDelay */
|
||||
#define LL_MAX_DELAY 0xFFFFFFFFU
|
||||
|
||||
/**
|
||||
* @brief Unique device ID register base address
|
||||
*/
|
||||
#define UID_BASE_ADDRESS UID_BASE
|
||||
|
||||
/**
|
||||
* @brief Flash size data register base address
|
||||
*/
|
||||
#define FLASHSIZE_BASE_ADDRESS FLASHSIZE_BASE
|
||||
|
||||
/**
|
||||
* @brief Package data register base address
|
||||
*/
|
||||
#define PACKAGE_BASE_ADDRESS PACKAGE_BASE
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private macros ------------------------------------------------------------*/
|
||||
/** @defgroup UTILS_LL_Private_Macros UTILS Private Macros
|
||||
* @{
|
||||
*/
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/** @defgroup UTILS_LL_ES_INIT UTILS Exported structures
|
||||
* @{
|
||||
*/
|
||||
/**
|
||||
* @brief UTILS PLL structure definition
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint32_t PLLM; /*!< Division factor for PLL VCO input clock.
|
||||
This parameter can be a value of @ref RCC_LL_EC_PLLM_DIV
|
||||
|
||||
This feature can be modified afterwards using unitary function
|
||||
@ref LL_RCC_PLL_ConfigDomain_SYS(). */
|
||||
|
||||
uint32_t PLLN; /*!< Multiplication factor for PLL VCO output clock.
|
||||
This parameter must be a number between Min_Data = 50 and Max_Data = 432
|
||||
|
||||
This feature can be modified afterwards using unitary function
|
||||
@ref LL_RCC_PLL_ConfigDomain_SYS(). */
|
||||
|
||||
uint32_t PLLP; /*!< Division for the main system clock.
|
||||
This parameter can be a value of @ref RCC_LL_EC_PLLP_DIV
|
||||
|
||||
This feature can be modified afterwards using unitary function
|
||||
@ref LL_RCC_PLL_ConfigDomain_SYS(). */
|
||||
} LL_UTILS_PLLInitTypeDef;
|
||||
|
||||
/**
|
||||
* @brief UTILS System, AHB and APB buses clock configuration structure definition
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint32_t AHBCLKDivider; /*!< The AHB clock (HCLK) divider. This clock is derived from the system clock (SYSCLK).
|
||||
This parameter can be a value of @ref RCC_LL_EC_SYSCLK_DIV
|
||||
|
||||
This feature can be modified afterwards using unitary function
|
||||
@ref LL_RCC_SetAHBPrescaler(). */
|
||||
|
||||
uint32_t APB1CLKDivider; /*!< The APB1 clock (PCLK1) divider. This clock is derived from the AHB clock (HCLK).
|
||||
This parameter can be a value of @ref RCC_LL_EC_APB1_DIV
|
||||
|
||||
This feature can be modified afterwards using unitary function
|
||||
@ref LL_RCC_SetAPB1Prescaler(). */
|
||||
|
||||
uint32_t APB2CLKDivider; /*!< The APB2 clock (PCLK2) divider. This clock is derived from the AHB clock (HCLK).
|
||||
This parameter can be a value of @ref RCC_LL_EC_APB2_DIV
|
||||
|
||||
This feature can be modified afterwards using unitary function
|
||||
@ref LL_RCC_SetAPB2Prescaler(). */
|
||||
|
||||
} LL_UTILS_ClkInitTypeDef;
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/** @defgroup UTILS_LL_Exported_Constants UTILS Exported Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup UTILS_EC_HSE_BYPASS HSE Bypass activation
|
||||
* @{
|
||||
*/
|
||||
#define LL_UTILS_HSEBYPASS_OFF 0x00000000U /*!< HSE Bypass is not enabled */
|
||||
#define LL_UTILS_HSEBYPASS_ON 0x00000001U /*!< HSE Bypass is enabled */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup UTILS_EC_PACKAGETYPE PACKAGE TYPE
|
||||
* @{
|
||||
*/
|
||||
#define LL_UTILS_PACKAGETYPE_LQFP100 0x00000100U /*!< LQFP100 package type */
|
||||
#define LL_UTILS_PACKAGETYPE_LQFP144_WLCSP143 0x00000200U /*!< LQFP144 or WLCSP143 package type */
|
||||
#define LL_UTILS_PACKAGETYPE_WLCSP180_LQFP176_UFBGA176 0x00000300U /*!< WLCSP180, LQFP176 or UFBGA176 package type */
|
||||
#define LL_UTILS_PACKAGETYPE_LQFP176_LQFP208_TFBGA216 0x00000400U /*!< LQFP176, LQFP208 or TFBGA216 package type */
|
||||
#define LL_UTILS_PACKAGETYPE_TFBGA216_LQFP176_LQFP208 0x00000500U /*!< LQFP176, LQFP208 or TFBGA216 package type */
|
||||
#define LL_UTILS_PACKAGETYPE_LQFP176_TFBGA216_LQFP208 0x00000600U /*!< LQFP176, LQFP208 or TFBGA216 package type */
|
||||
#define LL_UTILS_PACKAGETYPE_LQFP208_LQFP176_TFBGA216 0x00000700U /*!< LQFP176, LQFP208 or TFBGA216 package type */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @defgroup UTILS_LL_Exported_Functions UTILS Exported Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup UTILS_EF_DEVICE_ELECTRONIC_SIGNATURE DEVICE ELECTRONIC SIGNATURE
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Get Word0 of the unique device identifier (UID based on 96 bits)
|
||||
* @retval UID[31:0]
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_GetUID_Word0(void)
|
||||
{
|
||||
return (uint32_t)(READ_REG(*((uint32_t *)UID_BASE_ADDRESS)));
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Get Word1 of the unique device identifier (UID based on 96 bits)
|
||||
* @retval UID[63:32]
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_GetUID_Word1(void)
|
||||
{
|
||||
return (uint32_t)(READ_REG(*((uint32_t *)(UID_BASE_ADDRESS + 4U))));
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Get Word2 of the unique device identifier (UID based on 96 bits)
|
||||
* @retval UID[95:64]
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_GetUID_Word2(void)
|
||||
{
|
||||
return (uint32_t)(READ_REG(*((uint32_t *)(UID_BASE_ADDRESS + 8U))));
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Get Flash memory size
|
||||
* @note This bitfield indicates the size of the device Flash memory expressed in
|
||||
* Kbytes. As an example, 0x040 corresponds to 64 Kbytes.
|
||||
* @retval FLASH_SIZE[15:0]: Flash memory size
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_GetFlashSize(void)
|
||||
{
|
||||
return (uint32_t)(READ_REG(*((uint32_t *)FLASHSIZE_BASE_ADDRESS)) & 0xFFFFU);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Get Package type
|
||||
* @retval Returned value can be one of the following values:
|
||||
* @arg @ref LL_UTILS_PACKAGETYPE_LQFP100
|
||||
* @arg @ref LL_UTILS_PACKAGETYPE_LQFP144_WLCSP143 (*)
|
||||
* @arg @ref LL_UTILS_PACKAGETYPE_WLCSP180_LQFP176_UFBGA176 (*)
|
||||
* @arg @ref LL_UTILS_PACKAGETYPE_LQFP176_LQFP208_TFBGA216 (*)
|
||||
*
|
||||
* (*) value not defined in all devices.
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_GetPackageType(void)
|
||||
{
|
||||
return (uint32_t)(READ_REG(*((uint32_t *)PACKAGE_BASE_ADDRESS)) & 0x0700U);
|
||||
}
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup UTILS_LL_EF_DELAY DELAY
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief This function configures the Cortex-M SysTick source of the time base.
|
||||
* @param HCLKFrequency HCLK frequency in Hz (can be calculated thanks to RCC helper macro)
|
||||
* @note When a RTOS is used, it is recommended to avoid changing the SysTick
|
||||
* configuration by calling this function, for a delay use rather osDelay RTOS service.
|
||||
* @param Ticks Number of ticks
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_InitTick(uint32_t HCLKFrequency, uint32_t Ticks)
|
||||
{
|
||||
/* Configure the SysTick to have interrupt in 1ms time base */
|
||||
SysTick->LOAD = (uint32_t)((HCLKFrequency / Ticks) - 1UL); /* set reload register */
|
||||
SysTick->VAL = 0UL; /* Load the SysTick Counter Value */
|
||||
SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
|
||||
SysTick_CTRL_ENABLE_Msk; /* Enable the Systick Timer */
|
||||
}
|
||||
|
||||
void LL_Init1msTick(uint32_t HCLKFrequency);
|
||||
void LL_mDelay(uint32_t Delay);
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup UTILS_EF_SYSTEM SYSTEM
|
||||
* @{
|
||||
*/
|
||||
|
||||
void LL_SetSystemCoreClock(uint32_t HCLKFrequency);
|
||||
ErrorStatus LL_SetFlashLatency(uint32_t HCLK_Frequency);
|
||||
ErrorStatus LL_PLL_ConfigSystemClock_HSI(LL_UTILS_PLLInitTypeDef *UTILS_PLLInitStruct,
|
||||
LL_UTILS_ClkInitTypeDef *UTILS_ClkInitStruct);
|
||||
ErrorStatus LL_PLL_ConfigSystemClock_HSE(uint32_t HSEFrequency, uint32_t HSEBypass,
|
||||
LL_UTILS_PLLInitTypeDef *UTILS_PLLInitStruct, LL_UTILS_ClkInitTypeDef *UTILS_ClkInitStruct);
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __STM32F7xx_LL_UTILS_H */
|
||||
|
||||
6
project/Drivers/STM32F7xx_HAL_Driver/LICENSE.txt
Normal file
6
project/Drivers/STM32F7xx_HAL_Driver/LICENSE.txt
Normal file
@@ -0,0 +1,6 @@
|
||||
This software component is provided to you as part of a software package and
|
||||
applicable license terms are in the Package_license file. If you received this
|
||||
software component outside of a package or without applicable license terms,
|
||||
the terms of the BSD-3-Clause license shall apply.
|
||||
You may obtain a copy of the BSD-3-Clause at:
|
||||
https://opensource.org/licenses/BSD-3-Clause
|
||||
619
project/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal.c
Normal file
619
project/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal.c
Normal file
@@ -0,0 +1,619 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f7xx_hal.c
|
||||
* @author MCD Application Team
|
||||
* @brief HAL module driver.
|
||||
* This is the common part of the HAL initialization
|
||||
*
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
@verbatim
|
||||
==============================================================================
|
||||
##### How to use this driver #####
|
||||
==============================================================================
|
||||
[..]
|
||||
The common HAL driver contains a set of generic and common APIs that can be
|
||||
used by the PPP peripheral drivers and the user to start using the HAL.
|
||||
[..]
|
||||
The HAL contains two APIs' categories:
|
||||
(+) Common HAL APIs
|
||||
(+) Services HAL APIs
|
||||
|
||||
@endverbatim
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f7xx_hal.h"
|
||||
|
||||
/** @addtogroup STM32F7xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup HAL HAL
|
||||
* @brief HAL module driver.
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Private typedef -----------------------------------------------------------*/
|
||||
/* Private define ------------------------------------------------------------*/
|
||||
/** @addtogroup HAL_Private_Constants
|
||||
* @{
|
||||
*/
|
||||
/**
|
||||
* @brief STM32F7xx HAL Driver version number V1.3.0
|
||||
*/
|
||||
#define __STM32F7xx_HAL_VERSION_MAIN (0x01) /*!< [31:24] main version */
|
||||
#define __STM32F7xx_HAL_VERSION_SUB1 (0x03) /*!< [23:16] sub1 version */
|
||||
#define __STM32F7xx_HAL_VERSION_SUB2 (0x00) /*!< [15:8] sub2 version */
|
||||
#define __STM32F7xx_HAL_VERSION_RC (0x00) /*!< [7:0] release candidate */
|
||||
#define __STM32F7xx_HAL_VERSION ((__STM32F7xx_HAL_VERSION_MAIN << 24)\
|
||||
|(__STM32F7xx_HAL_VERSION_SUB1 << 16)\
|
||||
|(__STM32F7xx_HAL_VERSION_SUB2 << 8 )\
|
||||
|(__STM32F7xx_HAL_VERSION_RC))
|
||||
|
||||
#define IDCODE_DEVID_MASK ((uint32_t)0x00000FFF)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private macro -------------------------------------------------------------*/
|
||||
/* Exported variables ---------------------------------------------------------*/
|
||||
/** @addtogroup HAL_Exported_Variables
|
||||
* @{
|
||||
*/
|
||||
__IO uint32_t uwTick;
|
||||
uint32_t uwTickPrio = (1UL << __NVIC_PRIO_BITS); /* Invalid PRIO */
|
||||
HAL_TickFreqTypeDef uwTickFreq = HAL_TICK_FREQ_DEFAULT; /* 1KHz */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private function prototypes -----------------------------------------------*/
|
||||
/* Private functions ---------------------------------------------------------*/
|
||||
|
||||
/** @defgroup HAL_Exported_Functions HAL Exported Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup HAL_Exported_Functions_Group1 Initialization and de-initialization Functions
|
||||
* @brief Initialization and de-initialization functions
|
||||
*
|
||||
@verbatim
|
||||
===============================================================================
|
||||
##### Initialization and Configuration functions #####
|
||||
===============================================================================
|
||||
[..] This section provides functions allowing to:
|
||||
(+) Initializes the Flash interface the NVIC allocation and initial clock
|
||||
configuration. It initializes the systick also when timeout is needed
|
||||
and the backup domain when enabled.
|
||||
(+) De-Initializes common part of the HAL.
|
||||
(+) Configure the time base source to have 1ms time base with a dedicated
|
||||
Tick interrupt priority.
|
||||
(++) SysTick timer is used by default as source of time base, but user
|
||||
can eventually implement his proper time base source (a general purpose
|
||||
timer for example or other time source), keeping in mind that Time base
|
||||
duration should be kept 1ms since PPP_TIMEOUT_VALUEs are defined and
|
||||
handled in milliseconds basis.
|
||||
(++) Time base configuration function (HAL_InitTick ()) is called automatically
|
||||
at the beginning of the program after reset by HAL_Init() or at any time
|
||||
when clock is configured, by HAL_RCC_ClockConfig().
|
||||
(++) Source of time base is configured to generate interrupts at regular
|
||||
time intervals. Care must be taken if HAL_Delay() is called from a
|
||||
peripheral ISR process, the Tick interrupt line must have higher priority
|
||||
(numerically lower) than the peripheral interrupt. Otherwise the caller
|
||||
ISR process will be blocked.
|
||||
(++) functions affecting time base configurations are declared as __weak
|
||||
to make override possible in case of other implementations in user file.
|
||||
@endverbatim
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief This function is used to initialize the HAL Library; it must be the first
|
||||
* instruction to be executed in the main program (before to call any other
|
||||
* HAL function), it performs the following:
|
||||
* Configure the Flash prefetch, and instruction cache through ART accelerator.
|
||||
* Configures the SysTick to generate an interrupt each 1 millisecond,
|
||||
* which is clocked by the HSI (at this stage, the clock is not yet
|
||||
* configured and thus the system is running from the internal HSI at 16 MHz).
|
||||
* Set NVIC Group Priority to 4.
|
||||
* Calls the HAL_MspInit() callback function defined in user file
|
||||
* "stm32f7xx_hal_msp.c" to do the global low level hardware initialization
|
||||
*
|
||||
* @note SysTick is used as time base for the HAL_Delay() function, the application
|
||||
* need to ensure that the SysTick time base is always set to 1 millisecond
|
||||
* to have correct HAL operation.
|
||||
* @retval HAL status
|
||||
*/
|
||||
HAL_StatusTypeDef HAL_Init(void)
|
||||
{
|
||||
/* Configure Instruction cache through ART accelerator */
|
||||
#if (ART_ACCELERATOR_ENABLE != 0)
|
||||
__HAL_FLASH_ART_ENABLE();
|
||||
#endif /* ART_ACCELERATOR_ENABLE */
|
||||
|
||||
/* Configure Flash prefetch */
|
||||
#if (PREFETCH_ENABLE != 0U)
|
||||
__HAL_FLASH_PREFETCH_BUFFER_ENABLE();
|
||||
#endif /* PREFETCH_ENABLE */
|
||||
|
||||
/* Set Interrupt Group Priority */
|
||||
HAL_NVIC_SetPriorityGrouping(NVIC_PRIORITYGROUP_4);
|
||||
|
||||
/* Use systick as time base source and configure 1ms tick (default clock after Reset is HSI) */
|
||||
HAL_InitTick(TICK_INT_PRIORITY);
|
||||
|
||||
/* Init the low level hardware */
|
||||
HAL_MspInit();
|
||||
|
||||
/* Return function status */
|
||||
return HAL_OK;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function de-Initializes common part of the HAL and stops the systick.
|
||||
* This function is optional.
|
||||
* @retval HAL status
|
||||
*/
|
||||
HAL_StatusTypeDef HAL_DeInit(void)
|
||||
{
|
||||
/* Reset of all peripherals */
|
||||
__HAL_RCC_APB1_FORCE_RESET();
|
||||
__HAL_RCC_APB1_RELEASE_RESET();
|
||||
|
||||
__HAL_RCC_APB2_FORCE_RESET();
|
||||
__HAL_RCC_APB2_RELEASE_RESET();
|
||||
|
||||
__HAL_RCC_AHB1_FORCE_RESET();
|
||||
__HAL_RCC_AHB1_RELEASE_RESET();
|
||||
|
||||
__HAL_RCC_AHB2_FORCE_RESET();
|
||||
__HAL_RCC_AHB2_RELEASE_RESET();
|
||||
|
||||
__HAL_RCC_AHB3_FORCE_RESET();
|
||||
__HAL_RCC_AHB3_RELEASE_RESET();
|
||||
|
||||
/* De-Init the low level hardware */
|
||||
HAL_MspDeInit();
|
||||
|
||||
/* Return function status */
|
||||
return HAL_OK;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Initialize the MSP.
|
||||
* @retval None
|
||||
*/
|
||||
__weak void HAL_MspInit(void)
|
||||
{
|
||||
/* NOTE : This function should not be modified, when the callback is needed,
|
||||
the HAL_MspInit could be implemented in the user file
|
||||
*/
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief DeInitializes the MSP.
|
||||
* @retval None
|
||||
*/
|
||||
__weak void HAL_MspDeInit(void)
|
||||
{
|
||||
/* NOTE : This function should not be modified, when the callback is needed,
|
||||
the HAL_MspDeInit could be implemented in the user file
|
||||
*/
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function configures the source of the time base.
|
||||
* The time source is configured to have 1ms time base with a dedicated
|
||||
* Tick interrupt priority.
|
||||
* @note This function is called automatically at the beginning of program after
|
||||
* reset by HAL_Init() or at any time when clock is reconfigured by HAL_RCC_ClockConfig().
|
||||
* @note In the default implementation, SysTick timer is the source of time base.
|
||||
* It is used to generate interrupts at regular time intervals.
|
||||
* Care must be taken if HAL_Delay() is called from a peripheral ISR process,
|
||||
* The SysTick interrupt must have higher priority (numerically lower)
|
||||
* than the peripheral interrupt. Otherwise the caller ISR process will be blocked.
|
||||
* The function is declared as __weak to be overwritten in case of other
|
||||
* implementation in user file.
|
||||
* @param TickPriority Tick interrupt priority.
|
||||
* @retval HAL status
|
||||
*/
|
||||
__weak HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority)
|
||||
{
|
||||
/* Configure the SysTick to have interrupt in 1ms time basis*/
|
||||
if (HAL_SYSTICK_Config(SystemCoreClock / (1000U / uwTickFreq)) > 0U)
|
||||
{
|
||||
return HAL_ERROR;
|
||||
}
|
||||
|
||||
/* Configure the SysTick IRQ priority */
|
||||
if (TickPriority < (1UL << __NVIC_PRIO_BITS))
|
||||
{
|
||||
HAL_NVIC_SetPriority(SysTick_IRQn, TickPriority, 0U);
|
||||
uwTickPrio = TickPriority;
|
||||
}
|
||||
else
|
||||
{
|
||||
return HAL_ERROR;
|
||||
}
|
||||
|
||||
/* Return function status */
|
||||
return HAL_OK;
|
||||
}
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup HAL_Exported_Functions_Group2 HAL Control functions
|
||||
* @brief HAL Control functions
|
||||
*
|
||||
@verbatim
|
||||
===============================================================================
|
||||
##### HAL Control functions #####
|
||||
===============================================================================
|
||||
[..] This section provides functions allowing to:
|
||||
(+) Provide a tick value in millisecond
|
||||
(+) Provide a blocking delay in millisecond
|
||||
(+) Suspend the time base source interrupt
|
||||
(+) Resume the time base source interrupt
|
||||
(+) Get the HAL API driver version
|
||||
(+) Get the device identifier
|
||||
(+) Get the device revision identifier
|
||||
(+) Enable/Disable Debug module during SLEEP mode
|
||||
(+) Enable/Disable Debug module during STOP mode
|
||||
(+) Enable/Disable Debug module during STANDBY mode
|
||||
|
||||
@endverbatim
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief This function is called to increment a global variable "uwTick"
|
||||
* used as application time base.
|
||||
* @note In the default implementation, this variable is incremented each 1ms
|
||||
* in SysTick ISR.
|
||||
* @note This function is declared as __weak to be overwritten in case of other
|
||||
* implementations in user file.
|
||||
* @retval None
|
||||
*/
|
||||
__weak void HAL_IncTick(void)
|
||||
{
|
||||
uwTick += uwTickFreq;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Provides a tick value in millisecond.
|
||||
* @note This function is declared as __weak to be overwritten in case of other
|
||||
* implementations in user file.
|
||||
* @retval tick value
|
||||
*/
|
||||
__weak uint32_t HAL_GetTick(void)
|
||||
{
|
||||
return uwTick;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function returns a tick priority.
|
||||
* @retval tick priority
|
||||
*/
|
||||
uint32_t HAL_GetTickPrio(void)
|
||||
{
|
||||
return uwTickPrio;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Set new tick Freq.
|
||||
* @retval Status
|
||||
*/
|
||||
HAL_StatusTypeDef HAL_SetTickFreq(HAL_TickFreqTypeDef Freq)
|
||||
{
|
||||
HAL_StatusTypeDef status = HAL_OK;
|
||||
HAL_TickFreqTypeDef prevTickFreq;
|
||||
|
||||
assert_param(IS_TICKFREQ(Freq));
|
||||
|
||||
if (uwTickFreq != Freq)
|
||||
{
|
||||
/* Back up uwTickFreq frequency */
|
||||
prevTickFreq = uwTickFreq;
|
||||
|
||||
/* Update uwTickFreq global variable used by HAL_InitTick() */
|
||||
uwTickFreq = Freq;
|
||||
|
||||
/* Apply the new tick Freq */
|
||||
status = HAL_InitTick(uwTickPrio);
|
||||
|
||||
if (status != HAL_OK)
|
||||
{
|
||||
/* Restore previous tick frequency */
|
||||
uwTickFreq = prevTickFreq;
|
||||
}
|
||||
}
|
||||
|
||||
return status;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Return tick frequency.
|
||||
* @retval tick period in Hz
|
||||
*/
|
||||
HAL_TickFreqTypeDef HAL_GetTickFreq(void)
|
||||
{
|
||||
return uwTickFreq;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function provides minimum delay (in milliseconds) based
|
||||
* on variable incremented.
|
||||
* @note In the default implementation , SysTick timer is the source of time base.
|
||||
* It is used to generate interrupts at regular time intervals where uwTick
|
||||
* is incremented.
|
||||
* @note This function is declared as __weak to be overwritten in case of other
|
||||
* implementations in user file.
|
||||
* @param Delay specifies the delay time length, in milliseconds.
|
||||
* @retval None
|
||||
*/
|
||||
__weak void HAL_Delay(uint32_t Delay)
|
||||
{
|
||||
uint32_t tickstart = HAL_GetTick();
|
||||
uint32_t wait = Delay;
|
||||
|
||||
/* Add a freq to guarantee minimum wait */
|
||||
if (wait < HAL_MAX_DELAY)
|
||||
{
|
||||
wait += (uint32_t)(uwTickFreq);
|
||||
}
|
||||
|
||||
while ((HAL_GetTick() - tickstart) < wait)
|
||||
{
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Suspend Tick increment.
|
||||
* @note In the default implementation , SysTick timer is the source of time base. It is
|
||||
* used to generate interrupts at regular time intervals. Once HAL_SuspendTick()
|
||||
* is called, the SysTick interrupt will be disabled and so Tick increment
|
||||
* is suspended.
|
||||
* @note This function is declared as __weak to be overwritten in case of other
|
||||
* implementations in user file.
|
||||
* @retval None
|
||||
*/
|
||||
__weak void HAL_SuspendTick(void)
|
||||
{
|
||||
/* Disable SysTick Interrupt */
|
||||
SysTick->CTRL &= ~SysTick_CTRL_TICKINT_Msk;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Resume Tick increment.
|
||||
* @note In the default implementation , SysTick timer is the source of time base. It is
|
||||
* used to generate interrupts at regular time intervals. Once HAL_ResumeTick()
|
||||
* is called, the SysTick interrupt will be enabled and so Tick increment
|
||||
* is resumed.
|
||||
* @note This function is declared as __weak to be overwritten in case of other
|
||||
* implementations in user file.
|
||||
* @retval None
|
||||
*/
|
||||
__weak void HAL_ResumeTick(void)
|
||||
{
|
||||
/* Enable SysTick Interrupt */
|
||||
SysTick->CTRL |= SysTick_CTRL_TICKINT_Msk;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Returns the HAL revision
|
||||
* @retval version : 0xXYZR (8bits for each decimal, R for RC)
|
||||
*/
|
||||
uint32_t HAL_GetHalVersion(void)
|
||||
{
|
||||
return __STM32F7xx_HAL_VERSION;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Returns the device revision identifier.
|
||||
* @retval Device revision identifier
|
||||
*/
|
||||
uint32_t HAL_GetREVID(void)
|
||||
{
|
||||
return((DBGMCU->IDCODE) >> 16U);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Returns the device identifier.
|
||||
* @retval Device identifier
|
||||
*/
|
||||
uint32_t HAL_GetDEVID(void)
|
||||
{
|
||||
return((DBGMCU->IDCODE) & IDCODE_DEVID_MASK);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Returns first word of the unique device identifier (UID based on 96 bits)
|
||||
* @retval Device identifier
|
||||
*/
|
||||
uint32_t HAL_GetUIDw0(void)
|
||||
{
|
||||
return(READ_REG(*((uint32_t *)UID_BASE)));
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Returns second word of the unique device identifier (UID based on 96 bits)
|
||||
* @retval Device identifier
|
||||
*/
|
||||
uint32_t HAL_GetUIDw1(void)
|
||||
{
|
||||
return(READ_REG(*((uint32_t *)(UID_BASE + 4U))));
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Returns third word of the unique device identifier (UID based on 96 bits)
|
||||
* @retval Device identifier
|
||||
*/
|
||||
uint32_t HAL_GetUIDw2(void)
|
||||
{
|
||||
return(READ_REG(*((uint32_t *)(UID_BASE + 8U))));
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Enable the Debug Module during SLEEP mode
|
||||
* @retval None
|
||||
*/
|
||||
void HAL_DBGMCU_EnableDBGSleepMode(void)
|
||||
{
|
||||
SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_SLEEP);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Disable the Debug Module during SLEEP mode
|
||||
* @retval None
|
||||
*/
|
||||
void HAL_DBGMCU_DisableDBGSleepMode(void)
|
||||
{
|
||||
CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_SLEEP);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Enable the Debug Module during STOP mode
|
||||
* @retval None
|
||||
*/
|
||||
void HAL_DBGMCU_EnableDBGStopMode(void)
|
||||
{
|
||||
SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOP);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Disable the Debug Module during STOP mode
|
||||
* @retval None
|
||||
*/
|
||||
void HAL_DBGMCU_DisableDBGStopMode(void)
|
||||
{
|
||||
CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOP);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Enable the Debug Module during STANDBY mode
|
||||
* @retval None
|
||||
*/
|
||||
void HAL_DBGMCU_EnableDBGStandbyMode(void)
|
||||
{
|
||||
SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBY);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Disable the Debug Module during STANDBY mode
|
||||
* @retval None
|
||||
*/
|
||||
void HAL_DBGMCU_DisableDBGStandbyMode(void)
|
||||
{
|
||||
CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBY);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Enables the I/O Compensation Cell.
|
||||
* @note The I/O compensation cell can be used only when the device supply
|
||||
* voltage ranges from 2.4 to 3.6 V.
|
||||
* @retval None
|
||||
*/
|
||||
void HAL_EnableCompensationCell(void)
|
||||
{
|
||||
SYSCFG->CMPCR |= SYSCFG_CMPCR_CMP_PD;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Power-down the I/O Compensation Cell.
|
||||
* @note The I/O compensation cell can be used only when the device supply
|
||||
* voltage ranges from 2.4 to 3.6 V.
|
||||
* @retval None
|
||||
*/
|
||||
void HAL_DisableCompensationCell(void)
|
||||
{
|
||||
SYSCFG->CMPCR &= (uint32_t)~((uint32_t)SYSCFG_CMPCR_CMP_PD);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Enables the FMC Memory Mapping Swapping.
|
||||
*
|
||||
* @note SDRAM is accessible at 0x60000000
|
||||
* and NOR/RAM is accessible at 0xC0000000
|
||||
*
|
||||
* @retval None
|
||||
*/
|
||||
void HAL_EnableFMCMemorySwapping(void)
|
||||
{
|
||||
SYSCFG->MEMRMP |= SYSCFG_MEMRMP_SWP_FMC_0;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Disables the FMC Memory Mapping Swapping
|
||||
*
|
||||
* @note SDRAM is accessible at 0xC0000000 (default mapping)
|
||||
* and NOR/RAM is accessible at 0x60000000 (default mapping)
|
||||
*
|
||||
* @retval None
|
||||
*/
|
||||
void HAL_DisableFMCMemorySwapping(void)
|
||||
{
|
||||
SYSCFG->MEMRMP &= (uint32_t)~((uint32_t)SYSCFG_MEMRMP_SWP_FMC);
|
||||
}
|
||||
|
||||
#if defined (STM32F765xx) || defined (STM32F767xx) || defined (STM32F769xx) || defined (STM32F777xx) || defined (STM32F779xx)
|
||||
/**
|
||||
* @brief Enable the Internal FLASH Bank Swapping.
|
||||
*
|
||||
* @note This function can be used only for STM32F77xx/STM32F76xx devices.
|
||||
*
|
||||
* @note Flash Bank2 mapped at 0x08000000 (AXI) (aliased at 0x00200000 (TCM))
|
||||
* and Flash Bank1 mapped at 0x08100000 (AXI) (aliased at 0x00300000 (TCM))
|
||||
*
|
||||
* @retval None
|
||||
*/
|
||||
void HAL_EnableMemorySwappingBank(void)
|
||||
{
|
||||
SET_BIT(SYSCFG->MEMRMP, SYSCFG_MEMRMP_SWP_FB);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Disable the Internal FLASH Bank Swapping.
|
||||
*
|
||||
* @note This function can be used only for STM32F77xx/STM32F76xx devices.
|
||||
*
|
||||
* @note The default state : Flash Bank1 mapped at 0x08000000 (AXI) (aliased at 0x00200000 (TCM))
|
||||
* and Flash Bank2 mapped at 0x08100000 (AXI)( aliased at 0x00300000 (TCM))
|
||||
*
|
||||
* @retval None
|
||||
*/
|
||||
void HAL_DisableMemorySwappingBank(void)
|
||||
{
|
||||
CLEAR_BIT(SYSCFG->MEMRMP, SYSCFG_MEMRMP_SWP_FB);
|
||||
}
|
||||
#endif /* STM32F767xx || STM32F769xx || STM32F777xx || STM32F779xx */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
|
||||
503
project/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_cortex.c
Normal file
503
project/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_cortex.c
Normal file
@@ -0,0 +1,503 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f7xx_hal_cortex.c
|
||||
* @author MCD Application Team
|
||||
* @brief CORTEX HAL module driver.
|
||||
* This file provides firmware functions to manage the following
|
||||
* functionalities of the CORTEX:
|
||||
* + Initialization and de-initialization functions
|
||||
* + Peripheral Control functions
|
||||
*
|
||||
@verbatim
|
||||
==============================================================================
|
||||
##### How to use this driver #####
|
||||
==============================================================================
|
||||
|
||||
[..]
|
||||
*** How to configure Interrupts using CORTEX HAL driver ***
|
||||
===========================================================
|
||||
[..]
|
||||
This section provides functions allowing to configure the NVIC interrupts (IRQ).
|
||||
The Cortex-M4 exceptions are managed by CMSIS functions.
|
||||
|
||||
(#) Configure the NVIC Priority Grouping using HAL_NVIC_SetPriorityGrouping()
|
||||
function according to the following table.
|
||||
(#) Configure the priority of the selected IRQ Channels using HAL_NVIC_SetPriority().
|
||||
(#) Enable the selected IRQ Channels using HAL_NVIC_EnableIRQ().
|
||||
(#) please refer to programming manual for details in how to configure priority.
|
||||
|
||||
-@- When the NVIC_PRIORITYGROUP_0 is selected, IRQ preemption is no more possible.
|
||||
The pending IRQ priority will be managed only by the sub priority.
|
||||
|
||||
-@- IRQ priority order (sorted by highest to lowest priority):
|
||||
(+@) Lowest preemption priority
|
||||
(+@) Lowest sub priority
|
||||
(+@) Lowest hardware priority (IRQ number)
|
||||
|
||||
[..]
|
||||
*** How to configure Systick using CORTEX HAL driver ***
|
||||
========================================================
|
||||
[..]
|
||||
Setup SysTick Timer for time base.
|
||||
|
||||
(+) The HAL_SYSTICK_Config() function calls the SysTick_Config() function which
|
||||
is a CMSIS function that:
|
||||
(++) Configures the SysTick Reload register with value passed as function parameter.
|
||||
(++) Configures the SysTick IRQ priority to the lowest value (0x0F).
|
||||
(++) Resets the SysTick Counter register.
|
||||
(++) Configures the SysTick Counter clock source to be Core Clock Source (HCLK).
|
||||
(++) Enables the SysTick Interrupt.
|
||||
(++) Starts the SysTick Counter.
|
||||
|
||||
(+) You can change the SysTick Clock source to be HCLK_Div8 by calling the macro
|
||||
__HAL_CORTEX_SYSTICKCLK_CONFIG(SYSTICK_CLKSOURCE_HCLK_DIV8) just after the
|
||||
HAL_SYSTICK_Config() function call. The __HAL_CORTEX_SYSTICKCLK_CONFIG() macro is defined
|
||||
inside the stm32f7xx_hal_cortex.h file.
|
||||
|
||||
(+) You can change the SysTick IRQ priority by calling the
|
||||
HAL_NVIC_SetPriority(SysTick_IRQn,...) function just after the HAL_SYSTICK_Config() function
|
||||
call. The HAL_NVIC_SetPriority() call the NVIC_SetPriority() function which is a CMSIS function.
|
||||
|
||||
(+) To adjust the SysTick time base, use the following formula:
|
||||
|
||||
Reload Value = SysTick Counter Clock (Hz) x Desired Time base (s)
|
||||
(++) Reload Value is the parameter to be passed for HAL_SYSTICK_Config() function
|
||||
(++) Reload Value should not exceed 0xFFFFFF
|
||||
|
||||
@endverbatim
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file in
|
||||
* the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f7xx_hal.h"
|
||||
|
||||
/** @addtogroup STM32F7xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup CORTEX CORTEX
|
||||
* @brief CORTEX HAL module driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
#ifdef HAL_CORTEX_MODULE_ENABLED
|
||||
|
||||
/* Private types -------------------------------------------------------------*/
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
/* Private constants ---------------------------------------------------------*/
|
||||
/* Private macros ------------------------------------------------------------*/
|
||||
/* Private functions ---------------------------------------------------------*/
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
|
||||
/** @defgroup CORTEX_Exported_Functions CORTEX Exported Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
|
||||
/** @defgroup CORTEX_Exported_Functions_Group1 Initialization and de-initialization functions
|
||||
* @brief Initialization and Configuration functions
|
||||
*
|
||||
@verbatim
|
||||
==============================================================================
|
||||
##### Initialization and de-initialization functions #####
|
||||
==============================================================================
|
||||
[..]
|
||||
This section provides the CORTEX HAL driver functions allowing to configure Interrupts
|
||||
Systick functionalities
|
||||
|
||||
@endverbatim
|
||||
* @{
|
||||
*/
|
||||
|
||||
|
||||
/**
|
||||
* @brief Sets the priority grouping field (preemption priority and subpriority)
|
||||
* using the required unlock sequence.
|
||||
* @param PriorityGroup The priority grouping bits length.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg NVIC_PRIORITYGROUP_0: 0 bits for preemption priority
|
||||
* 4 bits for subpriority
|
||||
* @arg NVIC_PRIORITYGROUP_1: 1 bits for preemption priority
|
||||
* 3 bits for subpriority
|
||||
* @arg NVIC_PRIORITYGROUP_2: 2 bits for preemption priority
|
||||
* 2 bits for subpriority
|
||||
* @arg NVIC_PRIORITYGROUP_3: 3 bits for preemption priority
|
||||
* 1 bits for subpriority
|
||||
* @arg NVIC_PRIORITYGROUP_4: 4 bits for preemption priority
|
||||
* 0 bits for subpriority
|
||||
* @note When the NVIC_PriorityGroup_0 is selected, IRQ preemption is no more possible.
|
||||
* The pending IRQ priority will be managed only by the subpriority.
|
||||
* @retval None
|
||||
*/
|
||||
void HAL_NVIC_SetPriorityGrouping(uint32_t PriorityGroup)
|
||||
{
|
||||
/* Check the parameters */
|
||||
assert_param(IS_NVIC_PRIORITY_GROUP(PriorityGroup));
|
||||
|
||||
/* Set the PRIGROUP[10:8] bits according to the PriorityGroup parameter value */
|
||||
NVIC_SetPriorityGrouping(PriorityGroup);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Sets the priority of an interrupt.
|
||||
* @param IRQn External interrupt number.
|
||||
* This parameter can be an enumerator of IRQn_Type enumeration
|
||||
* (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f7xxxx.h))
|
||||
* @param PreemptPriority The preemption priority for the IRQn channel.
|
||||
* This parameter can be a value between 0 and 15
|
||||
* A lower priority value indicates a higher priority
|
||||
* @param SubPriority the subpriority level for the IRQ channel.
|
||||
* This parameter can be a value between 0 and 15
|
||||
* A lower priority value indicates a higher priority.
|
||||
* @retval None
|
||||
*/
|
||||
void HAL_NVIC_SetPriority(IRQn_Type IRQn, uint32_t PreemptPriority, uint32_t SubPriority)
|
||||
{
|
||||
uint32_t prioritygroup = 0x00;
|
||||
|
||||
/* Check the parameters */
|
||||
assert_param(IS_NVIC_SUB_PRIORITY(SubPriority));
|
||||
assert_param(IS_NVIC_PREEMPTION_PRIORITY(PreemptPriority));
|
||||
|
||||
prioritygroup = NVIC_GetPriorityGrouping();
|
||||
|
||||
NVIC_SetPriority(IRQn, NVIC_EncodePriority(prioritygroup, PreemptPriority, SubPriority));
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Enables a device specific interrupt in the NVIC interrupt controller.
|
||||
* @note To configure interrupts priority correctly, the NVIC_PriorityGroupConfig()
|
||||
* function should be called before.
|
||||
* @param IRQn External interrupt number.
|
||||
* This parameter can be an enumerator of IRQn_Type enumeration
|
||||
* (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f7xxxx.h))
|
||||
* @retval None
|
||||
*/
|
||||
void HAL_NVIC_EnableIRQ(IRQn_Type IRQn)
|
||||
{
|
||||
/* Check the parameters */
|
||||
assert_param(IS_NVIC_DEVICE_IRQ(IRQn));
|
||||
|
||||
/* Enable interrupt */
|
||||
NVIC_EnableIRQ(IRQn);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Disables a device specific interrupt in the NVIC interrupt controller.
|
||||
* @param IRQn External interrupt number.
|
||||
* This parameter can be an enumerator of IRQn_Type enumeration
|
||||
* (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f7xxxx.h))
|
||||
* @retval None
|
||||
*/
|
||||
void HAL_NVIC_DisableIRQ(IRQn_Type IRQn)
|
||||
{
|
||||
/* Check the parameters */
|
||||
assert_param(IS_NVIC_DEVICE_IRQ(IRQn));
|
||||
|
||||
/* Disable interrupt */
|
||||
NVIC_DisableIRQ(IRQn);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Initiates a system reset request to reset the MCU.
|
||||
* @retval None
|
||||
*/
|
||||
void HAL_NVIC_SystemReset(void)
|
||||
{
|
||||
/* System Reset */
|
||||
NVIC_SystemReset();
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Initializes the System Timer and its interrupt, and starts the System Tick Timer.
|
||||
* Counter is in free running mode to generate periodic interrupts.
|
||||
* @param TicksNumb Specifies the ticks Number of ticks between two interrupts.
|
||||
* @retval status: - 0 Function succeeded.
|
||||
* - 1 Function failed.
|
||||
*/
|
||||
uint32_t HAL_SYSTICK_Config(uint32_t TicksNumb)
|
||||
{
|
||||
return SysTick_Config(TicksNumb);
|
||||
}
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CORTEX_Exported_Functions_Group2 Peripheral Control functions
|
||||
* @brief Cortex control functions
|
||||
*
|
||||
@verbatim
|
||||
==============================================================================
|
||||
##### Peripheral Control functions #####
|
||||
==============================================================================
|
||||
[..]
|
||||
This subsection provides a set of functions allowing to control the CORTEX
|
||||
(NVIC, SYSTICK, MPU) functionalities.
|
||||
|
||||
|
||||
@endverbatim
|
||||
* @{
|
||||
*/
|
||||
|
||||
#if (__MPU_PRESENT == 1)
|
||||
/**
|
||||
* @brief Disables the MPU
|
||||
* @retval None
|
||||
*/
|
||||
void HAL_MPU_Disable(void)
|
||||
{
|
||||
/* Make sure outstanding transfers are done */
|
||||
__DMB();
|
||||
|
||||
/* Disable fault exceptions */
|
||||
SCB->SHCSR &= ~SCB_SHCSR_MEMFAULTENA_Msk;
|
||||
|
||||
/* Disable the MPU and clear the control register*/
|
||||
MPU->CTRL = 0;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Enables the MPU
|
||||
* @param MPU_Control Specifies the control mode of the MPU during hard fault,
|
||||
* NMI, FAULTMASK and privileged access to the default memory
|
||||
* This parameter can be one of the following values:
|
||||
* @arg MPU_HFNMI_PRIVDEF_NONE
|
||||
* @arg MPU_HARDFAULT_NMI
|
||||
* @arg MPU_PRIVILEGED_DEFAULT
|
||||
* @arg MPU_HFNMI_PRIVDEF
|
||||
* @retval None
|
||||
*/
|
||||
void HAL_MPU_Enable(uint32_t MPU_Control)
|
||||
{
|
||||
/* Enable the MPU */
|
||||
MPU->CTRL = MPU_Control | MPU_CTRL_ENABLE_Msk;
|
||||
|
||||
/* Enable fault exceptions */
|
||||
SCB->SHCSR |= SCB_SHCSR_MEMFAULTENA_Msk;
|
||||
|
||||
/* Ensure MPU setting take effects */
|
||||
__DSB();
|
||||
__ISB();
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Initializes and configures the Region and the memory to be protected.
|
||||
* @param MPU_Init Pointer to a MPU_Region_InitTypeDef structure that contains
|
||||
* the initialization and configuration information.
|
||||
* @retval None
|
||||
*/
|
||||
void HAL_MPU_ConfigRegion(MPU_Region_InitTypeDef *MPU_Init)
|
||||
{
|
||||
/* Check the parameters */
|
||||
assert_param(IS_MPU_REGION_NUMBER(MPU_Init->Number));
|
||||
assert_param(IS_MPU_REGION_ENABLE(MPU_Init->Enable));
|
||||
|
||||
/* Set the Region number */
|
||||
MPU->RNR = MPU_Init->Number;
|
||||
|
||||
if ((MPU_Init->Enable) != RESET)
|
||||
{
|
||||
/* Check the parameters */
|
||||
assert_param(IS_MPU_INSTRUCTION_ACCESS(MPU_Init->DisableExec));
|
||||
assert_param(IS_MPU_REGION_PERMISSION_ATTRIBUTE(MPU_Init->AccessPermission));
|
||||
assert_param(IS_MPU_TEX_LEVEL(MPU_Init->TypeExtField));
|
||||
assert_param(IS_MPU_ACCESS_SHAREABLE(MPU_Init->IsShareable));
|
||||
assert_param(IS_MPU_ACCESS_CACHEABLE(MPU_Init->IsCacheable));
|
||||
assert_param(IS_MPU_ACCESS_BUFFERABLE(MPU_Init->IsBufferable));
|
||||
assert_param(IS_MPU_SUB_REGION_DISABLE(MPU_Init->SubRegionDisable));
|
||||
assert_param(IS_MPU_REGION_SIZE(MPU_Init->Size));
|
||||
|
||||
MPU->RBAR = MPU_Init->BaseAddress;
|
||||
MPU->RASR = ((uint32_t)MPU_Init->DisableExec << MPU_RASR_XN_Pos) |
|
||||
((uint32_t)MPU_Init->AccessPermission << MPU_RASR_AP_Pos) |
|
||||
((uint32_t)MPU_Init->TypeExtField << MPU_RASR_TEX_Pos) |
|
||||
((uint32_t)MPU_Init->IsShareable << MPU_RASR_S_Pos) |
|
||||
((uint32_t)MPU_Init->IsCacheable << MPU_RASR_C_Pos) |
|
||||
((uint32_t)MPU_Init->IsBufferable << MPU_RASR_B_Pos) |
|
||||
((uint32_t)MPU_Init->SubRegionDisable << MPU_RASR_SRD_Pos) |
|
||||
((uint32_t)MPU_Init->Size << MPU_RASR_SIZE_Pos) |
|
||||
((uint32_t)MPU_Init->Enable << MPU_RASR_ENABLE_Pos);
|
||||
}
|
||||
else
|
||||
{
|
||||
MPU->RBAR = 0x00;
|
||||
MPU->RASR = 0x00;
|
||||
}
|
||||
}
|
||||
#endif /* __MPU_PRESENT */
|
||||
|
||||
/**
|
||||
* @brief Gets the priority grouping field from the NVIC Interrupt Controller.
|
||||
* @retval Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field)
|
||||
*/
|
||||
uint32_t HAL_NVIC_GetPriorityGrouping(void)
|
||||
{
|
||||
/* Get the PRIGROUP[10:8] field value */
|
||||
return NVIC_GetPriorityGrouping();
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Gets the priority of an interrupt.
|
||||
* @param IRQn External interrupt number.
|
||||
* This parameter can be an enumerator of IRQn_Type enumeration
|
||||
* (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f7xxxx.h))
|
||||
* @param PriorityGroup the priority grouping bits length.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg NVIC_PRIORITYGROUP_0: 0 bits for preemption priority
|
||||
* 4 bits for subpriority
|
||||
* @arg NVIC_PRIORITYGROUP_1: 1 bits for preemption priority
|
||||
* 3 bits for subpriority
|
||||
* @arg NVIC_PRIORITYGROUP_2: 2 bits for preemption priority
|
||||
* 2 bits for subpriority
|
||||
* @arg NVIC_PRIORITYGROUP_3: 3 bits for preemption priority
|
||||
* 1 bits for subpriority
|
||||
* @arg NVIC_PRIORITYGROUP_4: 4 bits for preemption priority
|
||||
* 0 bits for subpriority
|
||||
* @param pPreemptPriority Pointer on the Preemptive priority value (starting from 0).
|
||||
* @param pSubPriority Pointer on the Subpriority value (starting from 0).
|
||||
* @retval None
|
||||
*/
|
||||
void HAL_NVIC_GetPriority(IRQn_Type IRQn, uint32_t PriorityGroup, uint32_t *pPreemptPriority, uint32_t *pSubPriority)
|
||||
{
|
||||
/* Check the parameters */
|
||||
assert_param(IS_NVIC_PRIORITY_GROUP(PriorityGroup));
|
||||
/* Get priority for Cortex-M system or device specific interrupts */
|
||||
NVIC_DecodePriority(NVIC_GetPriority(IRQn), PriorityGroup, pPreemptPriority, pSubPriority);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Sets Pending bit of an external interrupt.
|
||||
* @param IRQn External interrupt number
|
||||
* This parameter can be an enumerator of IRQn_Type enumeration
|
||||
* (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f7xxxx.h))
|
||||
* @retval None
|
||||
*/
|
||||
void HAL_NVIC_SetPendingIRQ(IRQn_Type IRQn)
|
||||
{
|
||||
/* Check the parameters */
|
||||
assert_param(IS_NVIC_DEVICE_IRQ(IRQn));
|
||||
|
||||
/* Set interrupt pending */
|
||||
NVIC_SetPendingIRQ(IRQn);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Gets Pending Interrupt (reads the pending register in the NVIC
|
||||
* and returns the pending bit for the specified interrupt).
|
||||
* @param IRQn External interrupt number.
|
||||
* This parameter can be an enumerator of IRQn_Type enumeration
|
||||
* (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f7xxxx.h))
|
||||
* @retval status: - 0 Interrupt status is not pending.
|
||||
* - 1 Interrupt status is pending.
|
||||
*/
|
||||
uint32_t HAL_NVIC_GetPendingIRQ(IRQn_Type IRQn)
|
||||
{
|
||||
/* Check the parameters */
|
||||
assert_param(IS_NVIC_DEVICE_IRQ(IRQn));
|
||||
|
||||
/* Return 1 if pending else 0 */
|
||||
return NVIC_GetPendingIRQ(IRQn);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Clears the pending bit of an external interrupt.
|
||||
* @param IRQn External interrupt number.
|
||||
* This parameter can be an enumerator of IRQn_Type enumeration
|
||||
* (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f7xxxx.h))
|
||||
* @retval None
|
||||
*/
|
||||
void HAL_NVIC_ClearPendingIRQ(IRQn_Type IRQn)
|
||||
{
|
||||
/* Check the parameters */
|
||||
assert_param(IS_NVIC_DEVICE_IRQ(IRQn));
|
||||
|
||||
/* Clear pending interrupt */
|
||||
NVIC_ClearPendingIRQ(IRQn);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Gets active interrupt ( reads the active register in NVIC and returns the active bit).
|
||||
* @param IRQn External interrupt number
|
||||
* This parameter can be an enumerator of IRQn_Type enumeration
|
||||
* (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f7xxxx.h))
|
||||
* @retval status: - 0 Interrupt status is not pending.
|
||||
* - 1 Interrupt status is pending.
|
||||
*/
|
||||
uint32_t HAL_NVIC_GetActive(IRQn_Type IRQn)
|
||||
{
|
||||
/* Check the parameters */
|
||||
assert_param(IS_NVIC_DEVICE_IRQ(IRQn));
|
||||
|
||||
/* Return 1 if active else 0 */
|
||||
return NVIC_GetActive(IRQn);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Configures the SysTick clock source.
|
||||
* @param CLKSource specifies the SysTick clock source.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg SYSTICK_CLKSOURCE_HCLK_DIV8: AHB clock divided by 8 selected as SysTick clock source.
|
||||
* @arg SYSTICK_CLKSOURCE_HCLK: AHB clock selected as SysTick clock source.
|
||||
* @retval None
|
||||
*/
|
||||
void HAL_SYSTICK_CLKSourceConfig(uint32_t CLKSource)
|
||||
{
|
||||
/* Check the parameters */
|
||||
assert_param(IS_SYSTICK_CLK_SOURCE(CLKSource));
|
||||
if (CLKSource == SYSTICK_CLKSOURCE_HCLK)
|
||||
{
|
||||
SysTick->CTRL |= SYSTICK_CLKSOURCE_HCLK;
|
||||
}
|
||||
else
|
||||
{
|
||||
SysTick->CTRL &= ~SYSTICK_CLKSOURCE_HCLK;
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles SYSTICK interrupt request.
|
||||
* @retval None
|
||||
*/
|
||||
void HAL_SYSTICK_IRQHandler(void)
|
||||
{
|
||||
HAL_SYSTICK_Callback();
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief SYSTICK callback.
|
||||
* @retval None
|
||||
*/
|
||||
__weak void HAL_SYSTICK_Callback(void)
|
||||
{
|
||||
/* NOTE : This function Should not be modified, when the callback is needed,
|
||||
the HAL_SYSTICK_Callback could be implemented in the user file
|
||||
*/
|
||||
}
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#endif /* HAL_CORTEX_MODULE_ENABLED */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
1312
project/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_dma.c
Normal file
1312
project/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_dma.c
Normal file
File diff suppressed because it is too large
Load Diff
2146
project/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_dma2d.c
Normal file
2146
project/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_dma2d.c
Normal file
File diff suppressed because it is too large
Load Diff
308
project/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_dma_ex.c
Normal file
308
project/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_dma_ex.c
Normal file
@@ -0,0 +1,308 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f7xx_hal_dma_ex.c
|
||||
* @author MCD Application Team
|
||||
* @brief DMA Extension HAL module driver
|
||||
* This file provides firmware functions to manage the following
|
||||
* functionalities of the DMA Extension peripheral:
|
||||
* + Extended features functions
|
||||
*
|
||||
@verbatim
|
||||
==============================================================================
|
||||
##### How to use this driver #####
|
||||
==============================================================================
|
||||
[..]
|
||||
The DMA Extension HAL driver can be used as follows:
|
||||
(+) Start a multi buffer transfer using the HAL_DMA_MultiBufferStart() function
|
||||
for polling mode or HAL_DMA_MultiBufferStart_IT() for interrupt mode.
|
||||
|
||||
-@- In Memory-to-Memory transfer mode, Multi (Double) Buffer mode is not allowed.
|
||||
-@- When Multi (Double) Buffer mode is enabled, the transfer is circular by default.
|
||||
-@- In Multi (Double) buffer mode, it is possible to update the base address for
|
||||
the AHB memory port on the fly (DMA_SxM0AR or DMA_SxM1AR) when the stream is enabled.
|
||||
|
||||
@endverbatim
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file in
|
||||
* the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f7xx_hal.h"
|
||||
|
||||
/** @addtogroup STM32F7xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup DMAEx DMAEx
|
||||
* @brief DMA Extended HAL module driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
#ifdef HAL_DMA_MODULE_ENABLED
|
||||
|
||||
/* Private types -------------------------------------------------------------*/
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
/* Private Constants ---------------------------------------------------------*/
|
||||
/* Private macros ------------------------------------------------------------*/
|
||||
/* Private functions ---------------------------------------------------------*/
|
||||
/** @addtogroup DMAEx_Private_Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
static void DMA_MultiBufferSetConfig(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength);
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported functions ---------------------------------------------------------*/
|
||||
|
||||
/** @addtogroup DMAEx_Exported_Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
|
||||
/** @addtogroup DMAEx_Exported_Functions_Group1
|
||||
*
|
||||
@verbatim
|
||||
===============================================================================
|
||||
##### Extended features functions #####
|
||||
===============================================================================
|
||||
[..] This section provides functions allowing to:
|
||||
(+) Configure the source, destination address and data length and
|
||||
Start MultiBuffer DMA transfer
|
||||
(+) Configure the source, destination address and data length and
|
||||
Start MultiBuffer DMA transfer with interrupt
|
||||
(+) Change on the fly the memory0 or memory1 address.
|
||||
|
||||
@endverbatim
|
||||
* @{
|
||||
*/
|
||||
|
||||
|
||||
/**
|
||||
* @brief Starts the multi_buffer DMA Transfer.
|
||||
* @param hdma pointer to a DMA_HandleTypeDef structure that contains
|
||||
* the configuration information for the specified DMA Stream.
|
||||
* @param SrcAddress The source memory Buffer address
|
||||
* @param DstAddress The destination memory Buffer address
|
||||
* @param SecondMemAddress The second memory Buffer address in case of multi buffer Transfer
|
||||
* @param DataLength The length of data to be transferred from source to destination
|
||||
* @retval HAL status
|
||||
*/
|
||||
HAL_StatusTypeDef HAL_DMAEx_MultiBufferStart(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t SecondMemAddress, uint32_t DataLength)
|
||||
{
|
||||
HAL_StatusTypeDef status = HAL_OK;
|
||||
|
||||
/* Check the parameters */
|
||||
assert_param(IS_DMA_BUFFER_SIZE(DataLength));
|
||||
|
||||
/* Memory-to-memory transfer not supported in double buffering mode */
|
||||
if (hdma->Init.Direction == DMA_MEMORY_TO_MEMORY)
|
||||
{
|
||||
hdma->ErrorCode = HAL_DMA_ERROR_NOT_SUPPORTED;
|
||||
status = HAL_ERROR;
|
||||
}
|
||||
else
|
||||
{
|
||||
/* Process Locked */
|
||||
__HAL_LOCK(hdma);
|
||||
|
||||
if(HAL_DMA_STATE_READY == hdma->State)
|
||||
{
|
||||
/* Change DMA peripheral state */
|
||||
hdma->State = HAL_DMA_STATE_BUSY;
|
||||
|
||||
/* Enable the double buffer mode */
|
||||
hdma->Instance->CR |= (uint32_t)DMA_SxCR_DBM;
|
||||
|
||||
/* Configure DMA Stream destination address */
|
||||
hdma->Instance->M1AR = SecondMemAddress;
|
||||
|
||||
/* Configure the source, destination address and the data length */
|
||||
DMA_MultiBufferSetConfig(hdma, SrcAddress, DstAddress, DataLength);
|
||||
|
||||
/* Enable the peripheral */
|
||||
__HAL_DMA_ENABLE(hdma);
|
||||
}
|
||||
else
|
||||
{
|
||||
/* Return error status */
|
||||
status = HAL_BUSY;
|
||||
}
|
||||
}
|
||||
return status;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Starts the multi_buffer DMA Transfer with interrupt enabled.
|
||||
* @param hdma pointer to a DMA_HandleTypeDef structure that contains
|
||||
* the configuration information for the specified DMA Stream.
|
||||
* @param SrcAddress The source memory Buffer address
|
||||
* @param DstAddress The destination memory Buffer address
|
||||
* @param SecondMemAddress The second memory Buffer address in case of multi buffer Transfer
|
||||
* @param DataLength The length of data to be transferred from source to destination
|
||||
* @retval HAL status
|
||||
*/
|
||||
HAL_StatusTypeDef HAL_DMAEx_MultiBufferStart_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t SecondMemAddress, uint32_t DataLength)
|
||||
{
|
||||
HAL_StatusTypeDef status = HAL_OK;
|
||||
|
||||
/* Check the parameters */
|
||||
assert_param(IS_DMA_BUFFER_SIZE(DataLength));
|
||||
|
||||
/* Memory-to-memory transfer not supported in double buffering mode */
|
||||
if (hdma->Init.Direction == DMA_MEMORY_TO_MEMORY)
|
||||
{
|
||||
hdma->ErrorCode = HAL_DMA_ERROR_NOT_SUPPORTED;
|
||||
return HAL_ERROR;
|
||||
}
|
||||
|
||||
/* Process locked */
|
||||
__HAL_LOCK(hdma);
|
||||
|
||||
if(HAL_DMA_STATE_READY == hdma->State)
|
||||
{
|
||||
/* Change DMA peripheral state */
|
||||
hdma->State = HAL_DMA_STATE_BUSY;
|
||||
|
||||
/* Initialize the error code */
|
||||
hdma->ErrorCode = HAL_DMA_ERROR_NONE;
|
||||
|
||||
/* Enable the Double buffer mode */
|
||||
hdma->Instance->CR |= (uint32_t)DMA_SxCR_DBM;
|
||||
|
||||
/* Configure DMA Stream destination address */
|
||||
hdma->Instance->M1AR = SecondMemAddress;
|
||||
|
||||
/* Configure the source, destination address and the data length */
|
||||
DMA_MultiBufferSetConfig(hdma, SrcAddress, DstAddress, DataLength);
|
||||
|
||||
/* Clear all flags */
|
||||
__HAL_DMA_CLEAR_FLAG (hdma, __HAL_DMA_GET_TC_FLAG_INDEX(hdma));
|
||||
__HAL_DMA_CLEAR_FLAG (hdma, __HAL_DMA_GET_HT_FLAG_INDEX(hdma));
|
||||
__HAL_DMA_CLEAR_FLAG (hdma, __HAL_DMA_GET_TE_FLAG_INDEX(hdma));
|
||||
__HAL_DMA_CLEAR_FLAG (hdma, __HAL_DMA_GET_DME_FLAG_INDEX(hdma));
|
||||
__HAL_DMA_CLEAR_FLAG (hdma, __HAL_DMA_GET_FE_FLAG_INDEX(hdma));
|
||||
|
||||
/* Enable Common interrupts*/
|
||||
hdma->Instance->CR |= DMA_IT_TC | DMA_IT_TE | DMA_IT_DME;
|
||||
hdma->Instance->FCR |= DMA_IT_FE;
|
||||
|
||||
if((hdma->XferHalfCpltCallback != NULL) || (hdma->XferM1HalfCpltCallback != NULL))
|
||||
{
|
||||
hdma->Instance->CR |= DMA_IT_HT;
|
||||
}
|
||||
|
||||
/* Enable the peripheral */
|
||||
__HAL_DMA_ENABLE(hdma);
|
||||
}
|
||||
else
|
||||
{
|
||||
/* Process unlocked */
|
||||
__HAL_UNLOCK(hdma);
|
||||
|
||||
/* Return error status */
|
||||
status = HAL_BUSY;
|
||||
}
|
||||
return status;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Change the memory0 or memory1 address on the fly.
|
||||
* @param hdma pointer to a DMA_HandleTypeDef structure that contains
|
||||
* the configuration information for the specified DMA Stream.
|
||||
* @param Address The new address
|
||||
* @param memory the memory to be changed, This parameter can be one of
|
||||
* the following values:
|
||||
* MEMORY0 /
|
||||
* MEMORY1
|
||||
* @note The MEMORY0 address can be changed only when the current transfer use
|
||||
* MEMORY1 and the MEMORY1 address can be changed only when the current
|
||||
* transfer use MEMORY0.
|
||||
* @retval HAL status
|
||||
*/
|
||||
HAL_StatusTypeDef HAL_DMAEx_ChangeMemory(DMA_HandleTypeDef *hdma, uint32_t Address, HAL_DMA_MemoryTypeDef memory)
|
||||
{
|
||||
if(memory == MEMORY0)
|
||||
{
|
||||
/* change the memory0 address */
|
||||
hdma->Instance->M0AR = Address;
|
||||
}
|
||||
else
|
||||
{
|
||||
/* change the memory1 address */
|
||||
hdma->Instance->M1AR = Address;
|
||||
}
|
||||
|
||||
return HAL_OK;
|
||||
}
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup DMAEx_Private_Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Set the DMA Transfer parameter.
|
||||
* @param hdma pointer to a DMA_HandleTypeDef structure that contains
|
||||
* the configuration information for the specified DMA Stream.
|
||||
* @param SrcAddress The source memory Buffer address
|
||||
* @param DstAddress The destination memory Buffer address
|
||||
* @param DataLength The length of data to be transferred from source to destination
|
||||
* @retval HAL status
|
||||
*/
|
||||
static void DMA_MultiBufferSetConfig(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength)
|
||||
{
|
||||
/* Configure DMA Stream data length */
|
||||
hdma->Instance->NDTR = DataLength;
|
||||
|
||||
/* Peripheral to Memory */
|
||||
if((hdma->Init.Direction) == DMA_MEMORY_TO_PERIPH)
|
||||
{
|
||||
/* Configure DMA Stream destination address */
|
||||
hdma->Instance->PAR = DstAddress;
|
||||
|
||||
/* Configure DMA Stream source address */
|
||||
hdma->Instance->M0AR = SrcAddress;
|
||||
}
|
||||
/* Memory to Peripheral */
|
||||
else
|
||||
{
|
||||
/* Configure DMA Stream source address */
|
||||
hdma->Instance->PAR = SrcAddress;
|
||||
|
||||
/* Configure DMA Stream destination address */
|
||||
hdma->Instance->M0AR = DstAddress;
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#endif /* HAL_DMA_MODULE_ENABLED */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
3117
project/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_dsi.c
Normal file
3117
project/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_dsi.c
Normal file
File diff suppressed because it is too large
Load Diff
3220
project/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_eth.c
Normal file
3220
project/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_eth.c
Normal file
File diff suppressed because it is too large
Load Diff
547
project/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_exti.c
Normal file
547
project/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_exti.c
Normal file
@@ -0,0 +1,547 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32F7xx_hal_exti.c
|
||||
* @author MCD Application Team
|
||||
* @brief EXTI HAL module driver.
|
||||
* This file provides firmware functions to manage the following
|
||||
* functionalities of the Extended Interrupts and events controller (EXTI) peripheral:
|
||||
* + Initialization and de-initialization functions
|
||||
* + IO operation functions
|
||||
*
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2018 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
@verbatim
|
||||
==============================================================================
|
||||
##### EXTI Peripheral features #####
|
||||
==============================================================================
|
||||
[..]
|
||||
(+) Each Exti line can be configured within this driver.
|
||||
|
||||
(+) Exti line can be configured in 3 different modes
|
||||
(++) Interrupt
|
||||
(++) Event
|
||||
(++) Both of them
|
||||
|
||||
(+) Configurable Exti lines can be configured with 3 different triggers
|
||||
(++) Rising
|
||||
(++) Falling
|
||||
(++) Both of them
|
||||
|
||||
(+) When set in interrupt mode, configurable Exti lines have two different
|
||||
interrupts pending registers which allow to distinguish which transition
|
||||
occurs:
|
||||
(++) Rising edge pending interrupt
|
||||
(++) Falling
|
||||
|
||||
(+) Exti lines 0 to 15 are linked to gpio pin number 0 to 15. Gpio port can
|
||||
be selected through multiplexer.
|
||||
|
||||
##### How to use this driver #####
|
||||
==============================================================================
|
||||
[..]
|
||||
|
||||
(#) Configure the EXTI line using HAL_EXTI_SetConfigLine().
|
||||
(++) Choose the interrupt line number by setting "Line" member from
|
||||
EXTI_ConfigTypeDef structure.
|
||||
(++) Configure the interrupt and/or event mode using "Mode" member from
|
||||
EXTI_ConfigTypeDef structure.
|
||||
(++) For configurable lines, configure rising and/or falling trigger
|
||||
"Trigger" member from EXTI_ConfigTypeDef structure.
|
||||
(++) For Exti lines linked to gpio, choose gpio port using "GPIOSel"
|
||||
member from GPIO_InitTypeDef structure.
|
||||
|
||||
(#) Get current Exti configuration of a dedicated line using
|
||||
HAL_EXTI_GetConfigLine().
|
||||
(++) Provide exiting handle as parameter.
|
||||
(++) Provide pointer on EXTI_ConfigTypeDef structure as second parameter.
|
||||
|
||||
(#) Clear Exti configuration of a dedicated line using HAL_EXTI_GetConfigLine().
|
||||
(++) Provide exiting handle as parameter.
|
||||
|
||||
(#) Register callback to treat Exti interrupts using HAL_EXTI_RegisterCallback().
|
||||
(++) Provide exiting handle as first parameter.
|
||||
(++) Provide which callback will be registered using one value from
|
||||
EXTI_CallbackIDTypeDef.
|
||||
(++) Provide callback function pointer.
|
||||
|
||||
(#) Get interrupt pending bit using HAL_EXTI_GetPending().
|
||||
|
||||
(#) Clear interrupt pending bit using HAL_EXTI_GetPending().
|
||||
|
||||
(#) Generate software interrupt using HAL_EXTI_GenerateSWI().
|
||||
|
||||
@endverbatim
|
||||
*/
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f7xx_hal.h"
|
||||
|
||||
/** @addtogroup STM32F7xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup EXTI
|
||||
* @{
|
||||
*/
|
||||
/** MISRA C:2012 deviation rule has been granted for following rule:
|
||||
* Rule-18.1_b - Medium: Array `EXTICR' 1st subscript interval [0,7] may be out
|
||||
* of bounds [0,3] in following API :
|
||||
* HAL_EXTI_SetConfigLine
|
||||
* HAL_EXTI_GetConfigLine
|
||||
* HAL_EXTI_ClearConfigLine
|
||||
*/
|
||||
|
||||
#ifdef HAL_EXTI_MODULE_ENABLED
|
||||
|
||||
/* Private typedef -----------------------------------------------------------*/
|
||||
/* Private defines -----------------------------------------------------------*/
|
||||
/** @defgroup EXTI_Private_Constants EXTI Private Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private macros ------------------------------------------------------------*/
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
/* Private function prototypes -----------------------------------------------*/
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
|
||||
/** @addtogroup EXTI_Exported_Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup EXTI_Exported_Functions_Group1
|
||||
* @brief Configuration functions
|
||||
*
|
||||
@verbatim
|
||||
===============================================================================
|
||||
##### Configuration functions #####
|
||||
===============================================================================
|
||||
|
||||
@endverbatim
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Set configuration of a dedicated Exti line.
|
||||
* @param hexti Exti handle.
|
||||
* @param pExtiConfig Pointer on EXTI configuration to be set.
|
||||
* @retval HAL Status.
|
||||
*/
|
||||
HAL_StatusTypeDef HAL_EXTI_SetConfigLine(EXTI_HandleTypeDef *hexti, EXTI_ConfigTypeDef *pExtiConfig)
|
||||
{
|
||||
uint32_t regval;
|
||||
uint32_t linepos;
|
||||
uint32_t maskline;
|
||||
|
||||
/* Check null pointer */
|
||||
if ((hexti == NULL) || (pExtiConfig == NULL))
|
||||
{
|
||||
return HAL_ERROR;
|
||||
}
|
||||
|
||||
/* Check parameters */
|
||||
assert_param(IS_EXTI_LINE(pExtiConfig->Line));
|
||||
assert_param(IS_EXTI_MODE(pExtiConfig->Mode));
|
||||
|
||||
/* Assign line number to handle */
|
||||
hexti->Line = pExtiConfig->Line;
|
||||
|
||||
/* Compute line mask */
|
||||
linepos = (pExtiConfig->Line & EXTI_PIN_MASK);
|
||||
maskline = (1uL << linepos);
|
||||
|
||||
/* Configure triggers for configurable lines */
|
||||
if ((pExtiConfig->Line & EXTI_CONFIG) != 0x00u)
|
||||
{
|
||||
assert_param(IS_EXTI_TRIGGER(pExtiConfig->Trigger));
|
||||
|
||||
/* Configure rising trigger */
|
||||
/* Mask or set line */
|
||||
if ((pExtiConfig->Trigger & EXTI_TRIGGER_RISING) != 0x00u)
|
||||
{
|
||||
EXTI->RTSR |= maskline;
|
||||
}
|
||||
else
|
||||
{
|
||||
EXTI->RTSR &= ~maskline;
|
||||
}
|
||||
|
||||
/* Configure falling trigger */
|
||||
/* Mask or set line */
|
||||
if ((pExtiConfig->Trigger & EXTI_TRIGGER_FALLING) != 0x00u)
|
||||
{
|
||||
EXTI->FTSR |= maskline;
|
||||
}
|
||||
else
|
||||
{
|
||||
EXTI->FTSR &= ~maskline;
|
||||
}
|
||||
|
||||
|
||||
/* Configure gpio port selection in case of gpio exti line */
|
||||
if ((pExtiConfig->Line & EXTI_GPIO) == EXTI_GPIO)
|
||||
{
|
||||
assert_param(IS_EXTI_GPIO_PORT(pExtiConfig->GPIOSel));
|
||||
assert_param(IS_EXTI_GPIO_PIN(linepos));
|
||||
|
||||
regval = SYSCFG->EXTICR[linepos >> 2u];
|
||||
regval &= ~(SYSCFG_EXTICR1_EXTI0 << (SYSCFG_EXTICR1_EXTI1_Pos * (linepos & 0x03u)));
|
||||
regval |= (pExtiConfig->GPIOSel << (SYSCFG_EXTICR1_EXTI1_Pos * (linepos & 0x03u)));
|
||||
SYSCFG->EXTICR[linepos >> 2u] = regval;
|
||||
}
|
||||
}
|
||||
|
||||
/* Configure interrupt mode : read current mode */
|
||||
/* Mask or set line */
|
||||
if ((pExtiConfig->Mode & EXTI_MODE_INTERRUPT) != 0x00u)
|
||||
{
|
||||
EXTI->IMR |= maskline;
|
||||
}
|
||||
else
|
||||
{
|
||||
EXTI->IMR &= ~maskline;
|
||||
}
|
||||
|
||||
/* Configure event mode : read current mode */
|
||||
/* Mask or set line */
|
||||
if ((pExtiConfig->Mode & EXTI_MODE_EVENT) != 0x00u)
|
||||
{
|
||||
EXTI->EMR |= maskline;
|
||||
}
|
||||
else
|
||||
{
|
||||
EXTI->EMR &= ~maskline;
|
||||
}
|
||||
|
||||
return HAL_OK;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Get configuration of a dedicated Exti line.
|
||||
* @param hexti Exti handle.
|
||||
* @param pExtiConfig Pointer on structure to store Exti configuration.
|
||||
* @retval HAL Status.
|
||||
*/
|
||||
HAL_StatusTypeDef HAL_EXTI_GetConfigLine(EXTI_HandleTypeDef *hexti, EXTI_ConfigTypeDef *pExtiConfig)
|
||||
{
|
||||
uint32_t regval;
|
||||
uint32_t linepos;
|
||||
uint32_t maskline;
|
||||
|
||||
/* Check null pointer */
|
||||
if ((hexti == NULL) || (pExtiConfig == NULL))
|
||||
{
|
||||
return HAL_ERROR;
|
||||
}
|
||||
|
||||
/* Check the parameter */
|
||||
assert_param(IS_EXTI_LINE(hexti->Line));
|
||||
|
||||
/* Store handle line number to configuration structure */
|
||||
pExtiConfig->Line = hexti->Line;
|
||||
|
||||
/* Compute line mask */
|
||||
linepos = (pExtiConfig->Line & EXTI_PIN_MASK);
|
||||
maskline = (1uL << linepos);
|
||||
|
||||
/* 1] Get core mode : interrupt */
|
||||
|
||||
/* Check if selected line is enable */
|
||||
if ((EXTI->IMR & maskline) != 0x00u)
|
||||
{
|
||||
pExtiConfig->Mode = EXTI_MODE_INTERRUPT;
|
||||
}
|
||||
else
|
||||
{
|
||||
pExtiConfig->Mode = EXTI_MODE_NONE;
|
||||
}
|
||||
|
||||
/* Get event mode */
|
||||
/* Check if selected line is enable */
|
||||
if ((EXTI->EMR & maskline) != 0x00u)
|
||||
{
|
||||
pExtiConfig->Mode |= EXTI_MODE_EVENT;
|
||||
}
|
||||
|
||||
/* Get default Trigger and GPIOSel configuration */
|
||||
pExtiConfig->Trigger = EXTI_TRIGGER_NONE;
|
||||
pExtiConfig->GPIOSel = 0x00u;
|
||||
|
||||
/* 2] Get trigger for configurable lines : rising */
|
||||
if ((pExtiConfig->Line & EXTI_CONFIG) != 0x00u)
|
||||
{
|
||||
/* Check if configuration of selected line is enable */
|
||||
if ((EXTI->RTSR & maskline) != 0x00u)
|
||||
{
|
||||
pExtiConfig->Trigger = EXTI_TRIGGER_RISING;
|
||||
}
|
||||
|
||||
/* Get falling configuration */
|
||||
/* Check if configuration of selected line is enable */
|
||||
if ((EXTI->FTSR & maskline) != 0x00u)
|
||||
{
|
||||
pExtiConfig->Trigger |= EXTI_TRIGGER_FALLING;
|
||||
}
|
||||
|
||||
/* Get Gpio port selection for gpio lines */
|
||||
if ((pExtiConfig->Line & EXTI_GPIO) == EXTI_GPIO)
|
||||
{
|
||||
assert_param(IS_EXTI_GPIO_PIN(linepos));
|
||||
|
||||
regval = SYSCFG->EXTICR[linepos >> 2u];
|
||||
pExtiConfig->GPIOSel = ((regval << (SYSCFG_EXTICR1_EXTI1_Pos * (3uL - (linepos & 0x03u)))) >> 24);
|
||||
}
|
||||
}
|
||||
|
||||
return HAL_OK;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Clear whole configuration of a dedicated Exti line.
|
||||
* @param hexti Exti handle.
|
||||
* @retval HAL Status.
|
||||
*/
|
||||
HAL_StatusTypeDef HAL_EXTI_ClearConfigLine(EXTI_HandleTypeDef *hexti)
|
||||
{
|
||||
uint32_t regval;
|
||||
uint32_t linepos;
|
||||
uint32_t maskline;
|
||||
|
||||
/* Check null pointer */
|
||||
if (hexti == NULL)
|
||||
{
|
||||
return HAL_ERROR;
|
||||
}
|
||||
|
||||
/* Check the parameter */
|
||||
assert_param(IS_EXTI_LINE(hexti->Line));
|
||||
|
||||
/* compute line mask */
|
||||
linepos = (hexti->Line & EXTI_PIN_MASK);
|
||||
maskline = (1uL << linepos);
|
||||
|
||||
/* 1] Clear interrupt mode */
|
||||
EXTI->IMR = (EXTI->IMR & ~maskline);
|
||||
|
||||
/* 2] Clear event mode */
|
||||
EXTI->EMR = (EXTI->EMR & ~maskline);
|
||||
|
||||
/* 3] Clear triggers in case of configurable lines */
|
||||
if ((hexti->Line & EXTI_CONFIG) != 0x00u)
|
||||
{
|
||||
EXTI->RTSR = (EXTI->RTSR & ~maskline);
|
||||
EXTI->FTSR = (EXTI->FTSR & ~maskline);
|
||||
|
||||
/* Get Gpio port selection for gpio lines */
|
||||
if ((hexti->Line & EXTI_GPIO) == EXTI_GPIO)
|
||||
{
|
||||
assert_param(IS_EXTI_GPIO_PIN(linepos));
|
||||
|
||||
regval = SYSCFG->EXTICR[linepos >> 2u];
|
||||
regval &= ~(SYSCFG_EXTICR1_EXTI0 << (SYSCFG_EXTICR1_EXTI1_Pos * (linepos & 0x03u)));
|
||||
SYSCFG->EXTICR[linepos >> 2u] = regval;
|
||||
}
|
||||
}
|
||||
|
||||
return HAL_OK;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Register callback for a dedicated Exti line.
|
||||
* @param hexti Exti handle.
|
||||
* @param CallbackID User callback identifier.
|
||||
* This parameter can be one of @arg @ref EXTI_CallbackIDTypeDef values.
|
||||
* @param pPendingCbfn function pointer to be stored as callback.
|
||||
* @retval HAL Status.
|
||||
*/
|
||||
HAL_StatusTypeDef HAL_EXTI_RegisterCallback(EXTI_HandleTypeDef *hexti, EXTI_CallbackIDTypeDef CallbackID, void (*pPendingCbfn)(void))
|
||||
{
|
||||
HAL_StatusTypeDef status = HAL_OK;
|
||||
|
||||
switch (CallbackID)
|
||||
{
|
||||
case HAL_EXTI_COMMON_CB_ID:
|
||||
hexti->PendingCallback = pPendingCbfn;
|
||||
break;
|
||||
|
||||
default:
|
||||
status = HAL_ERROR;
|
||||
break;
|
||||
}
|
||||
|
||||
return status;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Store line number as handle private field.
|
||||
* @param hexti Exti handle.
|
||||
* @param ExtiLine Exti line number.
|
||||
* This parameter can be from 0 to @ref EXTI_LINE_NB.
|
||||
* @retval HAL Status.
|
||||
*/
|
||||
HAL_StatusTypeDef HAL_EXTI_GetHandle(EXTI_HandleTypeDef *hexti, uint32_t ExtiLine)
|
||||
{
|
||||
/* Check the parameters */
|
||||
assert_param(IS_EXTI_LINE(ExtiLine));
|
||||
|
||||
/* Check null pointer */
|
||||
if (hexti == NULL)
|
||||
{
|
||||
return HAL_ERROR;
|
||||
}
|
||||
else
|
||||
{
|
||||
/* Store line number as handle private field */
|
||||
hexti->Line = ExtiLine;
|
||||
|
||||
return HAL_OK;
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup EXTI_Exported_Functions_Group2
|
||||
* @brief EXTI IO functions.
|
||||
*
|
||||
@verbatim
|
||||
===============================================================================
|
||||
##### IO operation functions #####
|
||||
===============================================================================
|
||||
|
||||
@endverbatim
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Handle EXTI interrupt request.
|
||||
* @param hexti Exti handle.
|
||||
* @retval none.
|
||||
*/
|
||||
void HAL_EXTI_IRQHandler(EXTI_HandleTypeDef *hexti)
|
||||
{
|
||||
uint32_t regval;
|
||||
uint32_t maskline;
|
||||
|
||||
/* Compute line mask */
|
||||
maskline = (1uL << (hexti->Line & EXTI_PIN_MASK));
|
||||
|
||||
/* Get pending bit */
|
||||
regval = (EXTI->PR & maskline);
|
||||
if (regval != 0x00u)
|
||||
{
|
||||
/* Clear pending bit */
|
||||
EXTI->PR = maskline;
|
||||
|
||||
/* Call callback */
|
||||
if (hexti->PendingCallback != NULL)
|
||||
{
|
||||
hexti->PendingCallback();
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Get interrupt pending bit of a dedicated line.
|
||||
* @param hexti Exti handle.
|
||||
* @param Edge Specify which pending edge as to be checked.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg @ref EXTI_TRIGGER_RISING_FALLING
|
||||
* This parameter is kept for compatibility with other series.
|
||||
* @retval 1 if interrupt is pending else 0.
|
||||
*/
|
||||
uint32_t HAL_EXTI_GetPending(EXTI_HandleTypeDef *hexti, uint32_t Edge)
|
||||
{
|
||||
uint32_t regval;
|
||||
uint32_t linepos;
|
||||
uint32_t maskline;
|
||||
|
||||
/* Check parameters */
|
||||
assert_param(IS_EXTI_LINE(hexti->Line));
|
||||
assert_param(IS_EXTI_CONFIG_LINE(hexti->Line));
|
||||
assert_param(IS_EXTI_PENDING_EDGE(Edge));
|
||||
|
||||
/* Compute line mask */
|
||||
linepos = (hexti->Line & EXTI_PIN_MASK);
|
||||
maskline = (1uL << linepos);
|
||||
|
||||
/* return 1 if bit is set else 0 */
|
||||
regval = ((EXTI->PR & maskline) >> linepos);
|
||||
return regval;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Clear interrupt pending bit of a dedicated line.
|
||||
* @param hexti Exti handle.
|
||||
* @param Edge Specify which pending edge as to be clear.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg @ref EXTI_TRIGGER_RISING_FALLING
|
||||
* This parameter is kept for compatibility with other series.
|
||||
* @retval None.
|
||||
*/
|
||||
void HAL_EXTI_ClearPending(EXTI_HandleTypeDef *hexti, uint32_t Edge)
|
||||
{
|
||||
uint32_t maskline;
|
||||
|
||||
/* Check parameters */
|
||||
assert_param(IS_EXTI_LINE(hexti->Line));
|
||||
assert_param(IS_EXTI_CONFIG_LINE(hexti->Line));
|
||||
assert_param(IS_EXTI_PENDING_EDGE(Edge));
|
||||
|
||||
/* Compute line mask */
|
||||
maskline = (1uL << (hexti->Line & EXTI_PIN_MASK));
|
||||
|
||||
/* Clear Pending bit */
|
||||
EXTI->PR = maskline;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Generate a software interrupt for a dedicated line.
|
||||
* @param hexti Exti handle.
|
||||
* @retval None.
|
||||
*/
|
||||
void HAL_EXTI_GenerateSWI(EXTI_HandleTypeDef *hexti)
|
||||
{
|
||||
uint32_t maskline;
|
||||
|
||||
/* Check parameters */
|
||||
assert_param(IS_EXTI_LINE(hexti->Line));
|
||||
assert_param(IS_EXTI_CONFIG_LINE(hexti->Line));
|
||||
|
||||
/* Compute line mask */
|
||||
maskline = (1uL << (hexti->Line & EXTI_PIN_MASK));
|
||||
|
||||
/* Generate Software interrupt */
|
||||
EXTI->SWIER = maskline;
|
||||
}
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#endif /* HAL_EXTI_MODULE_ENABLED */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
819
project/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_flash.c
Normal file
819
project/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_flash.c
Normal file
@@ -0,0 +1,819 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f7xx_hal_flash.c
|
||||
* @author MCD Application Team
|
||||
* @brief FLASH HAL module driver.
|
||||
* This file provides firmware functions to manage the following
|
||||
* functionalities of the internal FLASH memory:
|
||||
* + Program operations functions
|
||||
* + Memory Control functions
|
||||
* + Peripheral Errors functions
|
||||
*
|
||||
@verbatim
|
||||
==============================================================================
|
||||
##### FLASH peripheral features #####
|
||||
==============================================================================
|
||||
|
||||
[..] The Flash memory interface manages CPU AHB I-Code and D-Code accesses
|
||||
to the Flash memory. It implements the erase and program Flash memory operations
|
||||
and the read and write protection mechanisms.
|
||||
|
||||
[..] The Flash memory interface accelerates code execution with a system of instruction
|
||||
prefetch and cache lines.
|
||||
|
||||
[..] The FLASH main features are:
|
||||
(+) Flash memory read operations
|
||||
(+) Flash memory program/erase operations
|
||||
(+) Read / write protections
|
||||
(+) Prefetch on I-Code
|
||||
(+) 64 cache lines of 128 bits on I-Code
|
||||
(+) 8 cache lines of 128 bits on D-Code
|
||||
|
||||
##### How to use this driver #####
|
||||
==============================================================================
|
||||
[..]
|
||||
This driver provides functions and macros to configure and program the FLASH
|
||||
memory of all STM32F7xx devices.
|
||||
|
||||
(#) FLASH Memory IO Programming functions:
|
||||
(++) Lock and Unlock the FLASH interface using HAL_FLASH_Unlock() and
|
||||
HAL_FLASH_Lock() functions
|
||||
(++) Program functions: byte, half word, word and double word
|
||||
(++) There Two modes of programming :
|
||||
(+++) Polling mode using HAL_FLASH_Program() function
|
||||
(+++) Interrupt mode using HAL_FLASH_Program_IT() function
|
||||
|
||||
(#) Interrupts and flags management functions :
|
||||
(++) Handle FLASH interrupts by calling HAL_FLASH_IRQHandler()
|
||||
(++) Wait for last FLASH operation according to its status
|
||||
(++) Get error flag status by calling HAL_SetErrorCode()
|
||||
[..]
|
||||
In addition to these functions, this driver includes a set of macros allowing
|
||||
to handle the following operations:
|
||||
(+) Set the latency
|
||||
(+) Enable/Disable the prefetch buffer
|
||||
(+) Enable/Disable the Instruction cache and the Data cache
|
||||
(+) Reset the Instruction cache and the Data cache
|
||||
(+) Enable/Disable the FLASH interrupts
|
||||
(+) Monitor the FLASH flags status
|
||||
[..]
|
||||
(@) For any Flash memory program operation (erase or program), the CPU clock frequency
|
||||
(HCLK) must be at least 1MHz.
|
||||
(@) The contents of the Flash memory are not guaranteed if a device reset occurs during
|
||||
a Flash memory operation.
|
||||
(@) Any attempt to read the Flash memory while it is being written or erased, causes the
|
||||
bus to stall. Read operations are processed correctly once the program operation has
|
||||
completed. This means that code or data fetches cannot be performed while a write/erase
|
||||
operation is ongoing.
|
||||
|
||||
@endverbatim
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file in
|
||||
* the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f7xx_hal.h"
|
||||
|
||||
/** @addtogroup STM32F7xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup FLASH FLASH
|
||||
* @brief FLASH HAL module driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
#ifdef HAL_FLASH_MODULE_ENABLED
|
||||
|
||||
/* Private typedef -----------------------------------------------------------*/
|
||||
/* Private define ------------------------------------------------------------*/
|
||||
/** @addtogroup FLASH_Private_Constants
|
||||
* @{
|
||||
*/
|
||||
#define SECTOR_MASK ((uint32_t)0xFFFFFF07U)
|
||||
#define FLASH_TIMEOUT_VALUE ((uint32_t)50000U)/* 50 s */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/* Private macro -------------------------------------------------------------*/
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
/** @addtogroup FLASH_Private_Variables
|
||||
* @{
|
||||
*/
|
||||
/* Variable used for Erase sectors under interruption */
|
||||
FLASH_ProcessTypeDef pFlash;
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private function prototypes -----------------------------------------------*/
|
||||
/** @addtogroup FLASH_Private_Functions
|
||||
* @{
|
||||
*/
|
||||
/* Program operations */
|
||||
static void FLASH_Program_DoubleWord(uint32_t Address, uint64_t Data);
|
||||
static void FLASH_Program_Word(uint32_t Address, uint32_t Data);
|
||||
static void FLASH_Program_HalfWord(uint32_t Address, uint16_t Data);
|
||||
static void FLASH_Program_Byte(uint32_t Address, uint8_t Data);
|
||||
static void FLASH_SetErrorCode(void);
|
||||
|
||||
HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @defgroup FLASH_Exported_Functions FLASH Exported Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup FLASH_Exported_Functions_Group1 Programming operation functions
|
||||
* @brief Programming operation functions
|
||||
*
|
||||
@verbatim
|
||||
===============================================================================
|
||||
##### Programming operation functions #####
|
||||
===============================================================================
|
||||
[..]
|
||||
This subsection provides a set of functions allowing to manage the FLASH
|
||||
program operations.
|
||||
|
||||
@endverbatim
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Program byte, halfword, word or double word at a specified address
|
||||
* @param TypeProgram Indicate the way to program at a specified address.
|
||||
* This parameter can be a value of @ref FLASH_Type_Program
|
||||
* @param Address specifies the address to be programmed.
|
||||
* @param Data specifies the data to be programmed
|
||||
*
|
||||
* @retval HAL_StatusTypeDef HAL Status
|
||||
*/
|
||||
HAL_StatusTypeDef HAL_FLASH_Program(uint32_t TypeProgram, uint32_t Address, uint64_t Data)
|
||||
{
|
||||
HAL_StatusTypeDef status = HAL_ERROR;
|
||||
|
||||
/* Process Locked */
|
||||
__HAL_LOCK(&pFlash);
|
||||
|
||||
/* Check the parameters */
|
||||
assert_param(IS_FLASH_TYPEPROGRAM(TypeProgram));
|
||||
|
||||
/* Wait for last operation to be completed */
|
||||
status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
|
||||
|
||||
if(status == HAL_OK)
|
||||
{
|
||||
switch(TypeProgram)
|
||||
{
|
||||
case FLASH_TYPEPROGRAM_BYTE :
|
||||
{
|
||||
/*Program byte (8-bit) at a specified address.*/
|
||||
FLASH_Program_Byte(Address, (uint8_t) Data);
|
||||
break;
|
||||
}
|
||||
|
||||
case FLASH_TYPEPROGRAM_HALFWORD :
|
||||
{
|
||||
/*Program halfword (16-bit) at a specified address.*/
|
||||
FLASH_Program_HalfWord(Address, (uint16_t) Data);
|
||||
break;
|
||||
}
|
||||
|
||||
case FLASH_TYPEPROGRAM_WORD :
|
||||
{
|
||||
/*Program word (32-bit) at a specified address.*/
|
||||
FLASH_Program_Word(Address, (uint32_t) Data);
|
||||
break;
|
||||
}
|
||||
|
||||
case FLASH_TYPEPROGRAM_DOUBLEWORD :
|
||||
{
|
||||
/*Program double word (64-bit) at a specified address.*/
|
||||
FLASH_Program_DoubleWord(Address, Data);
|
||||
break;
|
||||
}
|
||||
default :
|
||||
break;
|
||||
}
|
||||
/* Wait for last operation to be completed */
|
||||
status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
|
||||
|
||||
/* If the program operation is completed, disable the PG Bit */
|
||||
FLASH->CR &= (~FLASH_CR_PG);
|
||||
}
|
||||
|
||||
/* Process Unlocked */
|
||||
__HAL_UNLOCK(&pFlash);
|
||||
|
||||
return status;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Program byte, halfword, word or double word at a specified address with interrupt enabled.
|
||||
* @param TypeProgram Indicate the way to program at a specified address.
|
||||
* This parameter can be a value of @ref FLASH_Type_Program
|
||||
* @param Address specifies the address to be programmed.
|
||||
* @param Data specifies the data to be programmed
|
||||
*
|
||||
* @retval HAL Status
|
||||
*/
|
||||
HAL_StatusTypeDef HAL_FLASH_Program_IT(uint32_t TypeProgram, uint32_t Address, uint64_t Data)
|
||||
{
|
||||
HAL_StatusTypeDef status = HAL_OK;
|
||||
|
||||
/* Process Locked */
|
||||
__HAL_LOCK(&pFlash);
|
||||
|
||||
/* Check the parameters */
|
||||
assert_param(IS_FLASH_TYPEPROGRAM(TypeProgram));
|
||||
|
||||
/* Enable End of FLASH Operation interrupt */
|
||||
__HAL_FLASH_ENABLE_IT(FLASH_IT_EOP);
|
||||
|
||||
/* Enable Error source interrupt */
|
||||
__HAL_FLASH_ENABLE_IT(FLASH_IT_ERR);
|
||||
|
||||
/* Clear pending flags (if any) */
|
||||
__HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP | FLASH_FLAG_OPERR | FLASH_FLAG_WRPERR |\
|
||||
FLASH_FLAG_PGAERR | FLASH_FLAG_PGPERR| FLASH_FLAG_ERSERR);
|
||||
|
||||
pFlash.ProcedureOnGoing = FLASH_PROC_PROGRAM;
|
||||
pFlash.Address = Address;
|
||||
|
||||
switch(TypeProgram)
|
||||
{
|
||||
case FLASH_TYPEPROGRAM_BYTE :
|
||||
{
|
||||
/*Program byte (8-bit) at a specified address.*/
|
||||
FLASH_Program_Byte(Address, (uint8_t) Data);
|
||||
break;
|
||||
}
|
||||
|
||||
case FLASH_TYPEPROGRAM_HALFWORD :
|
||||
{
|
||||
/*Program halfword (16-bit) at a specified address.*/
|
||||
FLASH_Program_HalfWord(Address, (uint16_t) Data);
|
||||
break;
|
||||
}
|
||||
|
||||
case FLASH_TYPEPROGRAM_WORD :
|
||||
{
|
||||
/*Program word (32-bit) at a specified address.*/
|
||||
FLASH_Program_Word(Address, (uint32_t) Data);
|
||||
break;
|
||||
}
|
||||
|
||||
case FLASH_TYPEPROGRAM_DOUBLEWORD :
|
||||
{
|
||||
/*Program double word (64-bit) at a specified address.*/
|
||||
FLASH_Program_DoubleWord(Address, Data);
|
||||
break;
|
||||
}
|
||||
default :
|
||||
break;
|
||||
}
|
||||
return status;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles FLASH interrupt request.
|
||||
* @retval None
|
||||
*/
|
||||
void HAL_FLASH_IRQHandler(void)
|
||||
{
|
||||
uint32_t temp = 0;
|
||||
|
||||
/* If the program operation is completed, disable the PG Bit */
|
||||
FLASH->CR &= (~FLASH_CR_PG);
|
||||
|
||||
/* If the erase operation is completed, disable the SER Bit */
|
||||
FLASH->CR &= (~FLASH_CR_SER);
|
||||
FLASH->CR &= SECTOR_MASK;
|
||||
|
||||
/* if the erase operation is completed, disable the MER Bit */
|
||||
FLASH->CR &= (~FLASH_MER_BIT);
|
||||
|
||||
/* Check FLASH End of Operation flag */
|
||||
if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_EOP) != RESET)
|
||||
{
|
||||
/* Clear FLASH End of Operation pending bit */
|
||||
__HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP);
|
||||
|
||||
switch (pFlash.ProcedureOnGoing)
|
||||
{
|
||||
case FLASH_PROC_SECTERASE :
|
||||
{
|
||||
/* Nb of sector to erased can be decreased */
|
||||
pFlash.NbSectorsToErase--;
|
||||
|
||||
/* Check if there are still sectors to erase */
|
||||
if(pFlash.NbSectorsToErase != 0)
|
||||
{
|
||||
temp = pFlash.Sector;
|
||||
/* Indicate user which sector has been erased */
|
||||
HAL_FLASH_EndOfOperationCallback(temp);
|
||||
|
||||
/* Increment sector number */
|
||||
temp = ++pFlash.Sector;
|
||||
FLASH_Erase_Sector(temp, pFlash.VoltageForErase);
|
||||
}
|
||||
else
|
||||
{
|
||||
/* No more sectors to Erase, user callback can be called.*/
|
||||
/* Reset Sector and stop Erase sectors procedure */
|
||||
pFlash.Sector = temp = 0xFFFFFFFFU;
|
||||
/* FLASH EOP interrupt user callback */
|
||||
HAL_FLASH_EndOfOperationCallback(temp);
|
||||
/* Sector Erase procedure is completed */
|
||||
pFlash.ProcedureOnGoing = FLASH_PROC_NONE;
|
||||
}
|
||||
break;
|
||||
}
|
||||
|
||||
case FLASH_PROC_MASSERASE :
|
||||
{
|
||||
/* MassErase ended. Return the selected bank : in this product we don't have Banks */
|
||||
/* FLASH EOP interrupt user callback */
|
||||
HAL_FLASH_EndOfOperationCallback(0);
|
||||
/* MAss Erase procedure is completed */
|
||||
pFlash.ProcedureOnGoing = FLASH_PROC_NONE;
|
||||
break;
|
||||
}
|
||||
|
||||
case FLASH_PROC_PROGRAM :
|
||||
{
|
||||
/*Program ended. Return the selected address*/
|
||||
/* FLASH EOP interrupt user callback */
|
||||
HAL_FLASH_EndOfOperationCallback(pFlash.Address);
|
||||
/* Programming procedure is completed */
|
||||
pFlash.ProcedureOnGoing = FLASH_PROC_NONE;
|
||||
break;
|
||||
}
|
||||
default :
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
/* Check FLASH operation error flags */
|
||||
if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_ALL_ERRORS) != RESET)
|
||||
{
|
||||
switch (pFlash.ProcedureOnGoing)
|
||||
{
|
||||
case FLASH_PROC_SECTERASE :
|
||||
{
|
||||
/* return the faulty sector */
|
||||
temp = pFlash.Sector;
|
||||
pFlash.Sector = 0xFFFFFFFFU;
|
||||
break;
|
||||
}
|
||||
case FLASH_PROC_MASSERASE :
|
||||
{
|
||||
/* No return in case of Mass Erase */
|
||||
temp = 0;
|
||||
break;
|
||||
}
|
||||
case FLASH_PROC_PROGRAM :
|
||||
{
|
||||
/*return the faulty address*/
|
||||
temp = pFlash.Address;
|
||||
break;
|
||||
}
|
||||
default :
|
||||
break;
|
||||
}
|
||||
/*Save the Error code*/
|
||||
FLASH_SetErrorCode();
|
||||
|
||||
/* FLASH error interrupt user callback */
|
||||
HAL_FLASH_OperationErrorCallback(temp);
|
||||
|
||||
/*Stop the procedure ongoing */
|
||||
pFlash.ProcedureOnGoing = FLASH_PROC_NONE;
|
||||
}
|
||||
|
||||
if(pFlash.ProcedureOnGoing == FLASH_PROC_NONE)
|
||||
{
|
||||
/* Disable End of FLASH Operation interrupt */
|
||||
__HAL_FLASH_DISABLE_IT(FLASH_IT_EOP);
|
||||
|
||||
/* Disable Error source interrupt */
|
||||
__HAL_FLASH_DISABLE_IT(FLASH_IT_ERR);
|
||||
|
||||
/* Process Unlocked */
|
||||
__HAL_UNLOCK(&pFlash);
|
||||
}
|
||||
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief FLASH end of operation interrupt callback
|
||||
* @param ReturnValue The value saved in this parameter depends on the ongoing procedure
|
||||
* - Sectors Erase: Sector which has been erased (if 0xFFFFFFFF, it means that
|
||||
* all the selected sectors have been erased)
|
||||
* - Program : Address which was selected for data program
|
||||
* - Mass Erase : No return value expected
|
||||
* @retval None
|
||||
*/
|
||||
__weak void HAL_FLASH_EndOfOperationCallback(uint32_t ReturnValue)
|
||||
{
|
||||
/* Prevent unused argument(s) compilation warning */
|
||||
UNUSED(ReturnValue);
|
||||
/* NOTE : This function Should not be modified, when the callback is needed,
|
||||
the HAL_FLASH_EndOfOperationCallback could be implemented in the user file
|
||||
*/
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief FLASH operation error interrupt callback
|
||||
* @param ReturnValue The value saved in this parameter depends on the ongoing procedure
|
||||
* - Sectors Erase: Sector which has been erased (if 0xFFFFFFFF, it means that
|
||||
* all the selected sectors have been erased)
|
||||
* - Program : Address which was selected for data program
|
||||
* - Mass Erase : No return value expected
|
||||
* @retval None
|
||||
*/
|
||||
__weak void HAL_FLASH_OperationErrorCallback(uint32_t ReturnValue)
|
||||
{
|
||||
/* Prevent unused argument(s) compilation warning */
|
||||
UNUSED(ReturnValue);
|
||||
/* NOTE : This function Should not be modified, when the callback is needed,
|
||||
the HAL_FLASH_OperationErrorCallback could be implemented in the user file
|
||||
*/
|
||||
}
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup FLASH_Exported_Functions_Group2 Peripheral Control functions
|
||||
* @brief management functions
|
||||
*
|
||||
@verbatim
|
||||
===============================================================================
|
||||
##### Peripheral Control functions #####
|
||||
===============================================================================
|
||||
[..]
|
||||
This subsection provides a set of functions allowing to control the FLASH
|
||||
memory operations.
|
||||
|
||||
@endverbatim
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Unlock the FLASH control register access
|
||||
* @retval HAL Status
|
||||
*/
|
||||
HAL_StatusTypeDef HAL_FLASH_Unlock(void)
|
||||
{
|
||||
HAL_StatusTypeDef status = HAL_OK;
|
||||
|
||||
if(READ_BIT(FLASH->CR, FLASH_CR_LOCK) != RESET)
|
||||
{
|
||||
/* Authorize the FLASH Registers access */
|
||||
WRITE_REG(FLASH->KEYR, FLASH_KEY1);
|
||||
WRITE_REG(FLASH->KEYR, FLASH_KEY2);
|
||||
|
||||
/* Verify Flash is unlocked */
|
||||
if(READ_BIT(FLASH->CR, FLASH_CR_LOCK) != RESET)
|
||||
{
|
||||
status = HAL_ERROR;
|
||||
}
|
||||
}
|
||||
|
||||
return status;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Locks the FLASH control register access
|
||||
* @retval HAL Status
|
||||
*/
|
||||
HAL_StatusTypeDef HAL_FLASH_Lock(void)
|
||||
{
|
||||
/* Set the LOCK Bit to lock the FLASH Registers access */
|
||||
FLASH->CR |= FLASH_CR_LOCK;
|
||||
|
||||
return HAL_OK;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Unlock the FLASH Option Control Registers access.
|
||||
* @retval HAL Status
|
||||
*/
|
||||
HAL_StatusTypeDef HAL_FLASH_OB_Unlock(void)
|
||||
{
|
||||
if((FLASH->OPTCR & FLASH_OPTCR_OPTLOCK) != RESET)
|
||||
{
|
||||
/* Authorizes the Option Byte register programming */
|
||||
FLASH->OPTKEYR = FLASH_OPT_KEY1;
|
||||
FLASH->OPTKEYR = FLASH_OPT_KEY2;
|
||||
}
|
||||
else
|
||||
{
|
||||
return HAL_ERROR;
|
||||
}
|
||||
|
||||
return HAL_OK;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Lock the FLASH Option Control Registers access.
|
||||
* @retval HAL Status
|
||||
*/
|
||||
HAL_StatusTypeDef HAL_FLASH_OB_Lock(void)
|
||||
{
|
||||
/* Set the OPTLOCK Bit to lock the FLASH Option Byte Registers access */
|
||||
FLASH->OPTCR |= FLASH_OPTCR_OPTLOCK;
|
||||
|
||||
return HAL_OK;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Launch the option byte loading.
|
||||
* @retval HAL Status
|
||||
*/
|
||||
HAL_StatusTypeDef HAL_FLASH_OB_Launch(void)
|
||||
{
|
||||
/* Set the OPTSTRT bit in OPTCR register */
|
||||
FLASH->OPTCR |= FLASH_OPTCR_OPTSTRT;
|
||||
|
||||
/* Wait for last operation to be completed */
|
||||
return(FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE));
|
||||
}
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup FLASH_Exported_Functions_Group3 Peripheral State and Errors functions
|
||||
* @brief Peripheral Errors functions
|
||||
*
|
||||
@verbatim
|
||||
===============================================================================
|
||||
##### Peripheral Errors functions #####
|
||||
===============================================================================
|
||||
[..]
|
||||
This subsection permits to get in run-time Errors of the FLASH peripheral.
|
||||
|
||||
@endverbatim
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Get the specific FLASH error flag.
|
||||
* @retval FLASH_ErrorCode: The returned value can be:
|
||||
* @arg FLASH_ERROR_ERS: FLASH Erasing Sequence error flag
|
||||
* @arg FLASH_ERROR_PGP: FLASH Programming Parallelism error flag
|
||||
* @arg FLASH_ERROR_PGA: FLASH Programming Alignment error flag
|
||||
* @arg FLASH_ERROR_WRP: FLASH Write protected error flag
|
||||
* @arg FLASH_ERROR_OPERATION: FLASH operation Error flag
|
||||
*/
|
||||
uint32_t HAL_FLASH_GetError(void)
|
||||
{
|
||||
return pFlash.ErrorCode;
|
||||
}
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Wait for a FLASH operation to complete.
|
||||
* @param Timeout maximum flash operationtimeout
|
||||
* @retval HAL Status
|
||||
*/
|
||||
HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout)
|
||||
{
|
||||
uint32_t tickstart = 0;
|
||||
|
||||
/* Clear Error Code */
|
||||
pFlash.ErrorCode = HAL_FLASH_ERROR_NONE;
|
||||
|
||||
/* Wait for the FLASH operation to complete by polling on BUSY flag to be reset.
|
||||
Even if the FLASH operation fails, the BUSY flag will be reset and an error
|
||||
flag will be set */
|
||||
/* Get tick */
|
||||
tickstart = HAL_GetTick();
|
||||
|
||||
while(__HAL_FLASH_GET_FLAG(FLASH_FLAG_BSY) != RESET)
|
||||
{
|
||||
if(Timeout != HAL_MAX_DELAY)
|
||||
{
|
||||
if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
|
||||
{
|
||||
return HAL_TIMEOUT;
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_ALL_ERRORS) != RESET)
|
||||
{
|
||||
/*Save the error code*/
|
||||
FLASH_SetErrorCode();
|
||||
return HAL_ERROR;
|
||||
}
|
||||
|
||||
/* Check FLASH End of Operation flag */
|
||||
if (__HAL_FLASH_GET_FLAG(FLASH_FLAG_EOP) != RESET)
|
||||
{
|
||||
/* Clear FLASH End of Operation pending bit */
|
||||
__HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP);
|
||||
}
|
||||
|
||||
/* If there is an error flag set */
|
||||
return HAL_OK;
|
||||
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Program a double word (64-bit) at a specified address.
|
||||
* @note This function must be used when the device voltage range is from
|
||||
* 2.7V to 3.6V and an External Vpp is present.
|
||||
*
|
||||
* @note If an erase and a program operations are requested simultaneously,
|
||||
* the erase operation is performed before the program one.
|
||||
*
|
||||
* @param Address specifies the address to be programmed.
|
||||
* @param Data specifies the data to be programmed.
|
||||
* @retval None
|
||||
*/
|
||||
static void FLASH_Program_DoubleWord(uint32_t Address, uint64_t Data)
|
||||
{
|
||||
/* Check the parameters */
|
||||
assert_param(IS_FLASH_ADDRESS(Address));
|
||||
|
||||
/* If the previous operation is completed, proceed to program the new data */
|
||||
FLASH->CR &= CR_PSIZE_MASK;
|
||||
FLASH->CR |= FLASH_PSIZE_DOUBLE_WORD;
|
||||
FLASH->CR |= FLASH_CR_PG;
|
||||
|
||||
/* Program first word */
|
||||
*(__IO uint32_t*)Address = (uint32_t)Data;
|
||||
/* Barrier to ensure programming is performed in 2 steps, in right order
|
||||
(independently of compiler optimization behavior) */
|
||||
__ISB();
|
||||
|
||||
/* Program second word */
|
||||
*(__IO uint32_t*)(Address+4) = (uint32_t)(Data >> 32);
|
||||
|
||||
/* Data synchronous Barrier (DSB) Just after the write operation
|
||||
This will force the CPU to respect the sequence of instruction (no optimization).*/
|
||||
__DSB();
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
* @brief Program word (32-bit) at a specified address.
|
||||
* @note This function must be used when the device voltage range is from
|
||||
* 2.7V to 3.3V.
|
||||
*
|
||||
* @note If an erase and a program operations are requested simultaneously,
|
||||
* the erase operation is performed before the program one.
|
||||
*
|
||||
* @param Address specifies the address to be programmed.
|
||||
* @param Data specifies the data to be programmed.
|
||||
* @retval None
|
||||
*/
|
||||
static void FLASH_Program_Word(uint32_t Address, uint32_t Data)
|
||||
{
|
||||
/* Check the parameters */
|
||||
assert_param(IS_FLASH_ADDRESS(Address));
|
||||
|
||||
/* If the previous operation is completed, proceed to program the new data */
|
||||
FLASH->CR &= CR_PSIZE_MASK;
|
||||
FLASH->CR |= FLASH_PSIZE_WORD;
|
||||
FLASH->CR |= FLASH_CR_PG;
|
||||
|
||||
*(__IO uint32_t*)Address = Data;
|
||||
|
||||
/* Data synchronous Barrier (DSB) Just after the write operation
|
||||
This will force the CPU to respect the sequence of instruction (no optimization).*/
|
||||
__DSB();
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Program a half-word (16-bit) at a specified address.
|
||||
* @note This function must be used when the device voltage range is from
|
||||
* 2.1V to 3.6V.
|
||||
*
|
||||
* @note If an erase and a program operations are requested simultaneously,
|
||||
* the erase operation is performed before the program one.
|
||||
*
|
||||
* @param Address specifies the address to be programmed.
|
||||
* @param Data specifies the data to be programmed.
|
||||
* @retval None
|
||||
*/
|
||||
static void FLASH_Program_HalfWord(uint32_t Address, uint16_t Data)
|
||||
{
|
||||
/* Check the parameters */
|
||||
assert_param(IS_FLASH_ADDRESS(Address));
|
||||
|
||||
/* If the previous operation is completed, proceed to program the new data */
|
||||
FLASH->CR &= CR_PSIZE_MASK;
|
||||
FLASH->CR |= FLASH_PSIZE_HALF_WORD;
|
||||
FLASH->CR |= FLASH_CR_PG;
|
||||
|
||||
*(__IO uint16_t*)Address = Data;
|
||||
|
||||
/* Data synchronous Barrier (DSB) Just after the write operation
|
||||
This will force the CPU to respect the sequence of instruction (no optimization).*/
|
||||
__DSB();
|
||||
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Program byte (8-bit) at a specified address.
|
||||
* @note This function must be used when the device voltage range is from
|
||||
* 1.7V to 3.6V.
|
||||
*
|
||||
* @note If an erase and a program operations are requested simultaneously,
|
||||
* the erase operation is performed before the program one.
|
||||
*
|
||||
* @param Address specifies the address to be programmed.
|
||||
* @param Data specifies the data to be programmed.
|
||||
* @retval None
|
||||
*/
|
||||
static void FLASH_Program_Byte(uint32_t Address, uint8_t Data)
|
||||
{
|
||||
/* Check the parameters */
|
||||
assert_param(IS_FLASH_ADDRESS(Address));
|
||||
|
||||
/* If the previous operation is completed, proceed to program the new data */
|
||||
FLASH->CR &= CR_PSIZE_MASK;
|
||||
FLASH->CR |= FLASH_PSIZE_BYTE;
|
||||
FLASH->CR |= FLASH_CR_PG;
|
||||
|
||||
*(__IO uint8_t*)Address = Data;
|
||||
|
||||
/* Data synchronous Barrier (DSB) Just after the write operation
|
||||
This will force the CPU to respect the sequence of instruction (no optimization).*/
|
||||
__DSB();
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Set the specific FLASH error flag.
|
||||
* @retval None
|
||||
*/
|
||||
static void FLASH_SetErrorCode(void)
|
||||
{
|
||||
if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_OPERR) != RESET)
|
||||
{
|
||||
pFlash.ErrorCode |= HAL_FLASH_ERROR_OPERATION;
|
||||
}
|
||||
|
||||
if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_WRPERR) != RESET)
|
||||
{
|
||||
pFlash.ErrorCode |= HAL_FLASH_ERROR_WRP;
|
||||
}
|
||||
|
||||
if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_PGAERR) != RESET)
|
||||
{
|
||||
pFlash.ErrorCode |= HAL_FLASH_ERROR_PGA;
|
||||
}
|
||||
|
||||
if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_PGPERR) != RESET)
|
||||
{
|
||||
pFlash.ErrorCode |= HAL_FLASH_ERROR_PGP;
|
||||
}
|
||||
|
||||
if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_ERSERR) != RESET)
|
||||
{
|
||||
pFlash.ErrorCode |= HAL_FLASH_ERROR_ERS;
|
||||
}
|
||||
|
||||
#if defined (FLASH_OPTCR2_PCROP)
|
||||
if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_RDERR) != RESET)
|
||||
{
|
||||
pFlash.ErrorCode |= HAL_FLASH_ERROR_RD;
|
||||
}
|
||||
#endif /* FLASH_OPTCR2_PCROP */
|
||||
|
||||
/* Clear error programming flags */
|
||||
__HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_ALL_ERRORS);
|
||||
}
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#endif /* HAL_FLASH_MODULE_ENABLED */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
1119
project/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_flash_ex.c
Normal file
1119
project/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_flash_ex.c
Normal file
File diff suppressed because it is too large
Load Diff
527
project/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_gpio.c
Normal file
527
project/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_gpio.c
Normal file
@@ -0,0 +1,527 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f7xx_hal_gpio.c
|
||||
* @author MCD Application Team
|
||||
* @brief GPIO HAL module driver.
|
||||
* This file provides firmware functions to manage the following
|
||||
* functionalities of the General Purpose Input/Output (GPIO) peripheral:
|
||||
* + Initialization and de-initialization functions
|
||||
* + IO operation functions
|
||||
*
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
@verbatim
|
||||
==============================================================================
|
||||
##### GPIO Peripheral features #####
|
||||
==============================================================================
|
||||
[..]
|
||||
Subject to the specific hardware characteristics of each I/O port listed in the datasheet, each
|
||||
port bit of the General Purpose IO (GPIO) Ports, can be individually configured by software
|
||||
in several modes:
|
||||
(+) Input mode
|
||||
(+) Analog mode
|
||||
(+) Output mode
|
||||
(+) Alternate function mode
|
||||
(+) External interrupt/event lines
|
||||
|
||||
[..]
|
||||
During and just after reset, the alternate functions and external interrupt
|
||||
lines are not active and the I/O ports are configured in input floating mode.
|
||||
|
||||
[..]
|
||||
All GPIO pins have weak internal pull-up and pull-down resistors, which can be
|
||||
activated or not.
|
||||
|
||||
[..]
|
||||
In Output or Alternate mode, each IO can be configured on open-drain or push-pull
|
||||
type and the IO speed can be selected depending on the VDD value.
|
||||
|
||||
[..]
|
||||
All ports have external interrupt/event capability. To use external interrupt
|
||||
lines, the port must be configured in input mode. All available GPIO pins are
|
||||
connected to the 16 external interrupt/event lines from EXTI0 to EXTI15.
|
||||
|
||||
[..]
|
||||
The external interrupt/event controller consists of up to 23 edge detectors
|
||||
(16 lines are connected to GPIO) for generating event/interrupt requests (each
|
||||
input line can be independently configured to select the type (interrupt or event)
|
||||
and the corresponding trigger event (rising or falling or both). Each line can
|
||||
also be masked independently.
|
||||
|
||||
##### How to use this driver #####
|
||||
==============================================================================
|
||||
[..]
|
||||
(#) Enable the GPIO AHB clock using the following function: __HAL_RCC_GPIOx_CLK_ENABLE().
|
||||
|
||||
(#) Configure the GPIO pin(s) using HAL_GPIO_Init().
|
||||
(++) Configure the IO mode using "Mode" member from GPIO_InitTypeDef structure
|
||||
(++) Activate Pull-up, Pull-down resistor using "Pull" member from GPIO_InitTypeDef
|
||||
structure.
|
||||
(++) In case of Output or alternate function mode selection: the speed is
|
||||
configured through "Speed" member from GPIO_InitTypeDef structure.
|
||||
(++) In alternate mode is selection, the alternate function connected to the IO
|
||||
is configured through "Alternate" member from GPIO_InitTypeDef structure.
|
||||
(++) Analog mode is required when a pin is to be used as ADC channel
|
||||
or DAC output.
|
||||
(++) In case of external interrupt/event selection the "Mode" member from
|
||||
GPIO_InitTypeDef structure select the type (interrupt or event) and
|
||||
the corresponding trigger event (rising or falling or both).
|
||||
|
||||
(#) In case of external interrupt/event mode selection, configure NVIC IRQ priority
|
||||
mapped to the EXTI line using HAL_NVIC_SetPriority() and enable it using
|
||||
HAL_NVIC_EnableIRQ().
|
||||
|
||||
(#) To get the level of a pin configured in input mode use HAL_GPIO_ReadPin().
|
||||
|
||||
(#) To set/reset the level of a pin configured in output mode use
|
||||
HAL_GPIO_WritePin()/HAL_GPIO_TogglePin().
|
||||
|
||||
(#) To lock pin configuration until next reset use HAL_GPIO_LockPin().
|
||||
|
||||
|
||||
(#) During and just after reset, the alternate functions are not
|
||||
active and the GPIO pins are configured in input floating mode (except JTAG
|
||||
pins).
|
||||
|
||||
(#) The LSE oscillator pins OSC32_IN and OSC32_OUT can be used as general purpose
|
||||
(PC14 and PC15, respectively) when the LSE oscillator is off. The LSE has
|
||||
priority over the GPIO function.
|
||||
|
||||
(#) The HSE oscillator pins OSC_IN/OSC_OUT can be used as
|
||||
general purpose PH0 and PH1, respectively, when the HSE oscillator is off.
|
||||
The HSE has priority over the GPIO function.
|
||||
|
||||
@endverbatim
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f7xx_hal.h"
|
||||
|
||||
/** @addtogroup STM32F7xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup GPIO GPIO
|
||||
* @brief GPIO HAL module driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
#ifdef HAL_GPIO_MODULE_ENABLED
|
||||
|
||||
/* Private typedef -----------------------------------------------------------*/
|
||||
/* Private define ------------------------------------------------------------*/
|
||||
/** @addtogroup GPIO_Private_Constants GPIO Private Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
#define GPIO_NUMBER ((uint32_t)16U)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/* Private macro -------------------------------------------------------------*/
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
/* Private function prototypes -----------------------------------------------*/
|
||||
/* Private functions ---------------------------------------------------------*/
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @defgroup GPIO_Exported_Functions GPIO Exported Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup GPIO_Exported_Functions_Group1 Initialization and de-initialization functions
|
||||
* @brief Initialization and Configuration functions
|
||||
*
|
||||
@verbatim
|
||||
===============================================================================
|
||||
##### Initialization and de-initialization functions #####
|
||||
===============================================================================
|
||||
[..]
|
||||
This section provides functions allowing to initialize and de-initialize the GPIOs
|
||||
to be ready for use.
|
||||
|
||||
@endverbatim
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Initializes the GPIOx peripheral according to the specified parameters in the GPIO_Init.
|
||||
* @param GPIOx where x can be (A..K) to select the GPIO peripheral.
|
||||
* @param GPIO_Init pointer to a GPIO_InitTypeDef structure that contains
|
||||
* the configuration information for the specified GPIO peripheral.
|
||||
* @retval None
|
||||
*/
|
||||
void HAL_GPIO_Init(GPIO_TypeDef *GPIOx, GPIO_InitTypeDef *GPIO_Init)
|
||||
{
|
||||
uint32_t position = 0x00;
|
||||
uint32_t ioposition = 0x00;
|
||||
uint32_t iocurrent = 0x00;
|
||||
uint32_t temp = 0x00;
|
||||
|
||||
/* Check the parameters */
|
||||
assert_param(IS_GPIO_ALL_INSTANCE(GPIOx));
|
||||
assert_param(IS_GPIO_PIN(GPIO_Init->Pin));
|
||||
assert_param(IS_GPIO_MODE(GPIO_Init->Mode));
|
||||
|
||||
/* Configure the port pins */
|
||||
for(position = 0; position < GPIO_NUMBER; position++)
|
||||
{
|
||||
/* Get the IO position */
|
||||
ioposition = ((uint32_t)0x01) << position;
|
||||
/* Get the current IO position */
|
||||
iocurrent = (uint32_t)(GPIO_Init->Pin) & ioposition;
|
||||
|
||||
if(iocurrent == ioposition)
|
||||
{
|
||||
/*--------------------- GPIO Mode Configuration ------------------------*/
|
||||
/* In case of Output or Alternate function mode selection */
|
||||
if(((GPIO_Init->Mode & GPIO_MODE) == MODE_OUTPUT) || ((GPIO_Init->Mode & GPIO_MODE) == MODE_AF))
|
||||
{
|
||||
/* Check the Speed parameter */
|
||||
assert_param(IS_GPIO_SPEED(GPIO_Init->Speed));
|
||||
/* Configure the IO Speed */
|
||||
temp = GPIOx->OSPEEDR;
|
||||
temp &= ~(GPIO_OSPEEDER_OSPEEDR0 << (position * 2));
|
||||
temp |= (GPIO_Init->Speed << (position * 2));
|
||||
GPIOx->OSPEEDR = temp;
|
||||
|
||||
/* Configure the IO Output Type */
|
||||
temp = GPIOx->OTYPER;
|
||||
temp &= ~(GPIO_OTYPER_OT_0 << position) ;
|
||||
temp |= (((GPIO_Init->Mode & OUTPUT_TYPE) >> OUTPUT_TYPE_Pos) << position);
|
||||
GPIOx->OTYPER = temp;
|
||||
}
|
||||
|
||||
if((GPIO_Init->Mode & GPIO_MODE) != MODE_ANALOG)
|
||||
{
|
||||
/* Check the Pull parameter */
|
||||
assert_param(IS_GPIO_PULL(GPIO_Init->Pull));
|
||||
|
||||
/* Activate the Pull-up or Pull down resistor for the current IO */
|
||||
temp = GPIOx->PUPDR;
|
||||
temp &= ~(GPIO_PUPDR_PUPDR0 << (position * 2));
|
||||
temp |= ((GPIO_Init->Pull) << (position * 2));
|
||||
GPIOx->PUPDR = temp;
|
||||
}
|
||||
|
||||
/* In case of Alternate function mode selection */
|
||||
if((GPIO_Init->Mode & GPIO_MODE) == MODE_AF)
|
||||
{
|
||||
/* Check the Alternate function parameter */
|
||||
assert_param(IS_GPIO_AF(GPIO_Init->Alternate));
|
||||
|
||||
/* Configure Alternate function mapped with the current IO */
|
||||
temp = GPIOx->AFR[position >> 3];
|
||||
temp &= ~((uint32_t)0xF << ((uint32_t)(position & (uint32_t)0x07) * 4)) ;
|
||||
temp |= ((uint32_t)(GPIO_Init->Alternate) << (((uint32_t)position & (uint32_t)0x07) * 4));
|
||||
GPIOx->AFR[position >> 3] = temp;
|
||||
}
|
||||
|
||||
/* Configure IO Direction mode (Input, Output, Alternate or Analog) */
|
||||
temp = GPIOx->MODER;
|
||||
temp &= ~(GPIO_MODER_MODER0 << (position * 2));
|
||||
temp |= ((GPIO_Init->Mode & GPIO_MODE) << (position * 2));
|
||||
GPIOx->MODER = temp;
|
||||
|
||||
/*--------------------- EXTI Mode Configuration ------------------------*/
|
||||
/* Configure the External Interrupt or event for the current IO */
|
||||
if((GPIO_Init->Mode & EXTI_MODE) != 0x00u)
|
||||
{
|
||||
/* Enable SYSCFG Clock */
|
||||
__HAL_RCC_SYSCFG_CLK_ENABLE();
|
||||
|
||||
temp = SYSCFG->EXTICR[position >> 2];
|
||||
temp &= ~(((uint32_t)0x0F) << (4 * (position & 0x03)));
|
||||
temp |= ((uint32_t)(GPIO_GET_INDEX(GPIOx)) << (4 * (position & 0x03)));
|
||||
SYSCFG->EXTICR[position >> 2] = temp;
|
||||
|
||||
/* Clear Rising Falling edge configuration */
|
||||
temp = EXTI->RTSR;
|
||||
temp &= ~((uint32_t)iocurrent);
|
||||
if((GPIO_Init->Mode & TRIGGER_RISING) != 0x00u)
|
||||
{
|
||||
temp |= iocurrent;
|
||||
}
|
||||
EXTI->RTSR = temp;
|
||||
|
||||
temp = EXTI->FTSR;
|
||||
temp &= ~((uint32_t)iocurrent);
|
||||
if((GPIO_Init->Mode & TRIGGER_FALLING) != 0x00u)
|
||||
{
|
||||
temp |= iocurrent;
|
||||
}
|
||||
EXTI->FTSR = temp;
|
||||
|
||||
temp = EXTI->EMR;
|
||||
temp &= ~((uint32_t)iocurrent);
|
||||
if((GPIO_Init->Mode & EXTI_EVT) != 0x00u)
|
||||
{
|
||||
temp |= iocurrent;
|
||||
}
|
||||
EXTI->EMR = temp;
|
||||
|
||||
/* Clear EXTI line configuration */
|
||||
temp = EXTI->IMR;
|
||||
temp &= ~((uint32_t)iocurrent);
|
||||
if((GPIO_Init->Mode & EXTI_IT) != 0x00u)
|
||||
{
|
||||
temp |= iocurrent;
|
||||
}
|
||||
EXTI->IMR = temp;
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief De-initializes the GPIOx peripheral registers to their default reset values.
|
||||
* @param GPIOx where x can be (A..K) to select the GPIO peripheral.
|
||||
* @param GPIO_Pin specifies the port bit to be written.
|
||||
* This parameter can be one of GPIO_PIN_x where x can be (0..15).
|
||||
* @retval None
|
||||
*/
|
||||
void HAL_GPIO_DeInit(GPIO_TypeDef *GPIOx, uint32_t GPIO_Pin)
|
||||
{
|
||||
uint32_t position;
|
||||
uint32_t ioposition = 0x00;
|
||||
uint32_t iocurrent = 0x00;
|
||||
uint32_t tmp = 0x00;
|
||||
|
||||
/* Check the parameters */
|
||||
assert_param(IS_GPIO_ALL_INSTANCE(GPIOx));
|
||||
|
||||
/* Configure the port pins */
|
||||
for(position = 0; position < GPIO_NUMBER; position++)
|
||||
{
|
||||
/* Get the IO position */
|
||||
ioposition = ((uint32_t)0x01) << position;
|
||||
/* Get the current IO position */
|
||||
iocurrent = (GPIO_Pin) & ioposition;
|
||||
|
||||
if(iocurrent == ioposition)
|
||||
{
|
||||
/*------------------------- EXTI Mode Configuration --------------------*/
|
||||
tmp = SYSCFG->EXTICR[position >> 2];
|
||||
tmp &= (((uint32_t)0x0F) << (4 * (position & 0x03)));
|
||||
if(tmp == ((uint32_t)(GPIO_GET_INDEX(GPIOx)) << (4 * (position & 0x03))))
|
||||
{
|
||||
/* Clear EXTI line configuration */
|
||||
EXTI->IMR &= ~((uint32_t)iocurrent);
|
||||
EXTI->EMR &= ~((uint32_t)iocurrent);
|
||||
|
||||
/* Clear Rising Falling edge configuration */
|
||||
EXTI->FTSR &= ~((uint32_t)iocurrent);
|
||||
EXTI->RTSR &= ~((uint32_t)iocurrent);
|
||||
|
||||
/* Configure the External Interrupt or event for the current IO */
|
||||
tmp = ((uint32_t)0x0F) << (4 * (position & 0x03));
|
||||
SYSCFG->EXTICR[position >> 2] &= ~tmp;
|
||||
}
|
||||
/*------------------------- GPIO Mode Configuration --------------------*/
|
||||
/* Configure IO Direction in Input Floating Mode */
|
||||
GPIOx->MODER &= ~(GPIO_MODER_MODER0 << (position * 2));
|
||||
|
||||
/* Configure the default Alternate Function in current IO */
|
||||
GPIOx->AFR[position >> 3] &= ~((uint32_t)0xF << ((uint32_t)(position & (uint32_t)0x07) * 4)) ;
|
||||
|
||||
/* Deactivate the Pull-up and Pull-down resistor for the current IO */
|
||||
GPIOx->PUPDR &= ~(GPIO_PUPDR_PUPDR0 << (position * 2));
|
||||
|
||||
/* Configure the default value IO Output Type */
|
||||
GPIOx->OTYPER &= ~(GPIO_OTYPER_OT_0 << position) ;
|
||||
|
||||
/* Configure the default value for IO Speed */
|
||||
GPIOx->OSPEEDR &= ~(GPIO_OSPEEDER_OSPEEDR0 << (position * 2));
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup GPIO_Exported_Functions_Group2 IO operation functions
|
||||
* @brief GPIO Read and Write
|
||||
*
|
||||
@verbatim
|
||||
===============================================================================
|
||||
##### IO operation functions #####
|
||||
===============================================================================
|
||||
|
||||
@endverbatim
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Reads the specified input port pin.
|
||||
* @param GPIOx where x can be (A..K) to select the GPIO peripheral.
|
||||
* @param GPIO_Pin specifies the port bit to read.
|
||||
* This parameter can be GPIO_PIN_x where x can be (0..15).
|
||||
* @retval The input port pin value.
|
||||
*/
|
||||
GPIO_PinState HAL_GPIO_ReadPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin)
|
||||
{
|
||||
GPIO_PinState bitstatus;
|
||||
|
||||
/* Check the parameters */
|
||||
assert_param(IS_GPIO_PIN(GPIO_Pin));
|
||||
|
||||
if((GPIOx->IDR & GPIO_Pin) != (uint32_t)GPIO_PIN_RESET)
|
||||
{
|
||||
bitstatus = GPIO_PIN_SET;
|
||||
}
|
||||
else
|
||||
{
|
||||
bitstatus = GPIO_PIN_RESET;
|
||||
}
|
||||
return bitstatus;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Sets or clears the selected data port bit.
|
||||
*
|
||||
* @note This function uses GPIOx_BSRR register to allow atomic read/modify
|
||||
* accesses. In this way, there is no risk of an IRQ occurring between
|
||||
* the read and the modify access.
|
||||
*
|
||||
* @param GPIOx where x can be (A..K) to select the GPIO peripheral.
|
||||
* @param GPIO_Pin specifies the port bit to be written.
|
||||
* This parameter can be one of GPIO_PIN_x where x can be (0..15).
|
||||
* @param PinState specifies the value to be written to the selected bit.
|
||||
* This parameter can be one of the GPIO_PinState enum values:
|
||||
* @arg GPIO_PIN_RESET: to clear the port pin
|
||||
* @arg GPIO_PIN_SET: to set the port pin
|
||||
* @retval None
|
||||
*/
|
||||
void HAL_GPIO_WritePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, GPIO_PinState PinState)
|
||||
{
|
||||
/* Check the parameters */
|
||||
assert_param(IS_GPIO_PIN(GPIO_Pin));
|
||||
assert_param(IS_GPIO_PIN_ACTION(PinState));
|
||||
|
||||
if(PinState != GPIO_PIN_RESET)
|
||||
{
|
||||
GPIOx->BSRR = GPIO_Pin;
|
||||
}
|
||||
else
|
||||
{
|
||||
GPIOx->BSRR = (uint32_t)GPIO_Pin << 16;
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Toggles the specified GPIO pins.
|
||||
* @param GPIOx Where x can be (A..I) to select the GPIO peripheral.
|
||||
* @param GPIO_Pin Specifies the pins to be toggled.
|
||||
* @retval None
|
||||
*/
|
||||
void HAL_GPIO_TogglePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin)
|
||||
{
|
||||
uint32_t odr;
|
||||
|
||||
/* Check the parameters */
|
||||
assert_param(IS_GPIO_PIN(GPIO_Pin));
|
||||
|
||||
/* get current Output Data Register value */
|
||||
odr = GPIOx->ODR;
|
||||
|
||||
/* Set selected pins that were at low level, and reset ones that were high */
|
||||
GPIOx->BSRR = ((odr & GPIO_Pin) << GPIO_NUMBER) | (~odr & GPIO_Pin);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Locks GPIO Pins configuration registers.
|
||||
* @note The locked registers are GPIOx_MODER, GPIOx_OTYPER, GPIOx_OSPEEDR,
|
||||
* GPIOx_PUPDR, GPIOx_AFRL and GPIOx_AFRH.
|
||||
* @note The configuration of the locked GPIO pins can no longer be modified
|
||||
* until the next reset.
|
||||
* @param GPIOx where x can be (A..F) to select the GPIO peripheral for STM32F7 family
|
||||
* @param GPIO_Pin specifies the port bit to be locked.
|
||||
* This parameter can be any combination of GPIO_PIN_x where x can be (0..15).
|
||||
* @retval None
|
||||
*/
|
||||
HAL_StatusTypeDef HAL_GPIO_LockPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin)
|
||||
{
|
||||
__IO uint32_t tmp = GPIO_LCKR_LCKK;
|
||||
|
||||
/* Check the parameters */
|
||||
assert_param(IS_GPIO_PIN(GPIO_Pin));
|
||||
|
||||
/* Apply lock key write sequence */
|
||||
tmp |= GPIO_Pin;
|
||||
/* Set LCKx bit(s): LCKK='1' + LCK[15-0] */
|
||||
GPIOx->LCKR = tmp;
|
||||
/* Reset LCKx bit(s): LCKK='0' + LCK[15-0] */
|
||||
GPIOx->LCKR = GPIO_Pin;
|
||||
/* Set LCKx bit(s): LCKK='1' + LCK[15-0] */
|
||||
GPIOx->LCKR = tmp;
|
||||
/* Read LCKR register. This read is mandatory to complete key lock sequence */
|
||||
tmp = GPIOx->LCKR;
|
||||
|
||||
/* Read again in order to confirm lock is active */
|
||||
if((GPIOx->LCKR & GPIO_LCKR_LCKK) != RESET)
|
||||
{
|
||||
return HAL_OK;
|
||||
}
|
||||
else
|
||||
{
|
||||
return HAL_ERROR;
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles EXTI interrupt request.
|
||||
* @param GPIO_Pin Specifies the pins connected EXTI line
|
||||
* @retval None
|
||||
*/
|
||||
void HAL_GPIO_EXTI_IRQHandler(uint16_t GPIO_Pin)
|
||||
{
|
||||
/* EXTI line interrupt detected */
|
||||
if(__HAL_GPIO_EXTI_GET_IT(GPIO_Pin) != RESET)
|
||||
{
|
||||
__HAL_GPIO_EXTI_CLEAR_IT(GPIO_Pin);
|
||||
HAL_GPIO_EXTI_Callback(GPIO_Pin);
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief EXTI line detection callbacks.
|
||||
* @param GPIO_Pin Specifies the pins connected EXTI line
|
||||
* @retval None
|
||||
*/
|
||||
__weak void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin)
|
||||
{
|
||||
/* Prevent unused argument(s) compilation warning */
|
||||
UNUSED(GPIO_Pin);
|
||||
|
||||
/* NOTE: This function Should not be modified, when the callback is needed,
|
||||
the HAL_GPIO_EXTI_Callback could be implemented in the user file
|
||||
*/
|
||||
}
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#endif /* HAL_GPIO_MODULE_ENABLED */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
7180
project/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_i2c.c
Normal file
7180
project/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_i2c.c
Normal file
File diff suppressed because it is too large
Load Diff
270
project/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_i2c_ex.c
Normal file
270
project/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_i2c_ex.c
Normal file
@@ -0,0 +1,270 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f7xx_hal_i2c_ex.c
|
||||
* @author MCD Application Team
|
||||
* @brief I2C Extended HAL module driver.
|
||||
* This file provides firmware functions to manage the following
|
||||
* functionalities of I2C Extended peripheral:
|
||||
* + Filter Mode Functions
|
||||
* + FastModePlus Functions
|
||||
*
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
@verbatim
|
||||
==============================================================================
|
||||
##### I2C peripheral Extended features #####
|
||||
==============================================================================
|
||||
|
||||
[..] Comparing to other previous devices, the I2C interface for STM32F7xx
|
||||
devices contains the following additional features
|
||||
|
||||
(+) Possibility to disable or enable Analog Noise Filter
|
||||
(+) Use of a configured Digital Noise Filter
|
||||
(+) Disable or enable Fast Mode Plus
|
||||
|
||||
##### How to use this driver #####
|
||||
==============================================================================
|
||||
[..] This driver provides functions to:
|
||||
(#) Configure I2C Analog noise filter using the function HAL_I2CEx_ConfigAnalogFilter()
|
||||
(#) Configure I2C Digital noise filter using the function HAL_I2CEx_ConfigDigitalFilter()
|
||||
(#) Configure the enable or disable of fast mode plus driving capability using the functions :
|
||||
(++) HAL_I2CEx_EnableFastModePlus()
|
||||
(++) HAL_I2CEx_DisableFastModePlus()
|
||||
@endverbatim
|
||||
*/
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f7xx_hal.h"
|
||||
|
||||
/** @addtogroup STM32F7xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup I2CEx I2CEx
|
||||
* @brief I2C Extended HAL module driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
#ifdef HAL_I2C_MODULE_ENABLED
|
||||
|
||||
/* Private typedef -----------------------------------------------------------*/
|
||||
/* Private define ------------------------------------------------------------*/
|
||||
/* Private macro -------------------------------------------------------------*/
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
/* Private function prototypes -----------------------------------------------*/
|
||||
/* Private functions ---------------------------------------------------------*/
|
||||
|
||||
/** @defgroup I2CEx_Exported_Functions I2C Extended Exported Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup I2CEx_Exported_Functions_Group1 Filter Mode Functions
|
||||
* @brief Filter Mode Functions
|
||||
*
|
||||
@verbatim
|
||||
===============================================================================
|
||||
##### Filter Mode Functions #####
|
||||
===============================================================================
|
||||
[..] This section provides functions allowing to:
|
||||
(+) Configure Noise Filters
|
||||
|
||||
@endverbatim
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Configure I2C Analog noise filter.
|
||||
* @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
|
||||
* the configuration information for the specified I2Cx peripheral.
|
||||
* @param AnalogFilter New state of the Analog filter.
|
||||
* @retval HAL status
|
||||
*/
|
||||
HAL_StatusTypeDef HAL_I2CEx_ConfigAnalogFilter(I2C_HandleTypeDef *hi2c, uint32_t AnalogFilter)
|
||||
{
|
||||
/* Check the parameters */
|
||||
assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance));
|
||||
assert_param(IS_I2C_ANALOG_FILTER(AnalogFilter));
|
||||
|
||||
if (hi2c->State == HAL_I2C_STATE_READY)
|
||||
{
|
||||
/* Process Locked */
|
||||
__HAL_LOCK(hi2c);
|
||||
|
||||
hi2c->State = HAL_I2C_STATE_BUSY;
|
||||
|
||||
/* Disable the selected I2C peripheral */
|
||||
__HAL_I2C_DISABLE(hi2c);
|
||||
|
||||
/* Reset I2Cx ANOFF bit */
|
||||
hi2c->Instance->CR1 &= ~(I2C_CR1_ANFOFF);
|
||||
|
||||
/* Set analog filter bit*/
|
||||
hi2c->Instance->CR1 |= AnalogFilter;
|
||||
|
||||
__HAL_I2C_ENABLE(hi2c);
|
||||
|
||||
hi2c->State = HAL_I2C_STATE_READY;
|
||||
|
||||
/* Process Unlocked */
|
||||
__HAL_UNLOCK(hi2c);
|
||||
|
||||
return HAL_OK;
|
||||
}
|
||||
else
|
||||
{
|
||||
return HAL_BUSY;
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Configure I2C Digital noise filter.
|
||||
* @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
|
||||
* the configuration information for the specified I2Cx peripheral.
|
||||
* @param DigitalFilter Coefficient of digital noise filter between Min_Data=0x00 and Max_Data=0x0F.
|
||||
* @retval HAL status
|
||||
*/
|
||||
HAL_StatusTypeDef HAL_I2CEx_ConfigDigitalFilter(I2C_HandleTypeDef *hi2c, uint32_t DigitalFilter)
|
||||
{
|
||||
uint32_t tmpreg;
|
||||
|
||||
/* Check the parameters */
|
||||
assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance));
|
||||
assert_param(IS_I2C_DIGITAL_FILTER(DigitalFilter));
|
||||
|
||||
if (hi2c->State == HAL_I2C_STATE_READY)
|
||||
{
|
||||
/* Process Locked */
|
||||
__HAL_LOCK(hi2c);
|
||||
|
||||
hi2c->State = HAL_I2C_STATE_BUSY;
|
||||
|
||||
/* Disable the selected I2C peripheral */
|
||||
__HAL_I2C_DISABLE(hi2c);
|
||||
|
||||
/* Get the old register value */
|
||||
tmpreg = hi2c->Instance->CR1;
|
||||
|
||||
/* Reset I2Cx DNF bits [11:8] */
|
||||
tmpreg &= ~(I2C_CR1_DNF);
|
||||
|
||||
/* Set I2Cx DNF coefficient */
|
||||
tmpreg |= DigitalFilter << 8U;
|
||||
|
||||
/* Store the new register value */
|
||||
hi2c->Instance->CR1 = tmpreg;
|
||||
|
||||
__HAL_I2C_ENABLE(hi2c);
|
||||
|
||||
hi2c->State = HAL_I2C_STATE_READY;
|
||||
|
||||
/* Process Unlocked */
|
||||
__HAL_UNLOCK(hi2c);
|
||||
|
||||
return HAL_OK;
|
||||
}
|
||||
else
|
||||
{
|
||||
return HAL_BUSY;
|
||||
}
|
||||
}
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
#if (defined(SYSCFG_PMC_I2C_PB6_FMP) || defined(SYSCFG_PMC_I2C_PB7_FMP)) || (defined(SYSCFG_PMC_I2C_PB8_FMP) || defined(SYSCFG_PMC_I2C_PB9_FMP)) || (defined(SYSCFG_PMC_I2C1_FMP)) || (defined(SYSCFG_PMC_I2C2_FMP)) || defined(SYSCFG_PMC_I2C3_FMP) || defined(SYSCFG_PMC_I2C4_FMP)
|
||||
|
||||
/** @defgroup I2CEx_Exported_Functions_Group3 Fast Mode Plus Functions
|
||||
* @brief Fast Mode Plus Functions
|
||||
*
|
||||
@verbatim
|
||||
===============================================================================
|
||||
##### Fast Mode Plus Functions #####
|
||||
===============================================================================
|
||||
[..] This section provides functions allowing to:
|
||||
(+) Configure Fast Mode Plus
|
||||
|
||||
@endverbatim
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Enable the I2C fast mode plus driving capability.
|
||||
* @param ConfigFastModePlus Selects the pin.
|
||||
* This parameter can be one of the @ref I2CEx_FastModePlus values
|
||||
* @note For I2C1, fast mode plus driving capability can be enabled on all selected
|
||||
* I2C1 pins using I2C_FASTMODEPLUS_I2C1 parameter or independently
|
||||
* on each one of the following pins PB6, PB7, PB8 and PB9.
|
||||
* @note For remaining I2C1 pins (PA14, PA15...) fast mode plus driving capability
|
||||
* can be enabled only by using I2C_FASTMODEPLUS_I2C1 parameter.
|
||||
* @note For all I2C2 pins fast mode plus driving capability can be enabled
|
||||
* only by using I2C_FASTMODEPLUS_I2C2 parameter.
|
||||
* @note For all I2C3 pins fast mode plus driving capability can be enabled
|
||||
* only by using I2C_FASTMODEPLUS_I2C3 parameter.
|
||||
* @note For all I2C4 pins fast mode plus driving capability can be enabled
|
||||
* only by using I2C_FASTMODEPLUS_I2C4 parameter.
|
||||
* @retval None
|
||||
*/
|
||||
void HAL_I2CEx_EnableFastModePlus(uint32_t ConfigFastModePlus)
|
||||
{
|
||||
/* Check the parameter */
|
||||
assert_param(IS_I2C_FASTMODEPLUS(ConfigFastModePlus));
|
||||
|
||||
/* Enable SYSCFG clock */
|
||||
__HAL_RCC_SYSCFG_CLK_ENABLE();
|
||||
|
||||
/* Enable fast mode plus driving capability for selected pin */
|
||||
SET_BIT(SYSCFG->PMC, (uint32_t)ConfigFastModePlus);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Disable the I2C fast mode plus driving capability.
|
||||
* @param ConfigFastModePlus Selects the pin.
|
||||
* This parameter can be one of the @ref I2CEx_FastModePlus values
|
||||
* @note For I2C1, fast mode plus driving capability can be disabled on all selected
|
||||
* I2C1 pins using I2C_FASTMODEPLUS_I2C1 parameter or independently
|
||||
* on each one of the following pins PB6, PB7, PB8 and PB9.
|
||||
* @note For remaining I2C1 pins (PA14, PA15...) fast mode plus driving capability
|
||||
* can be disabled only by using I2C_FASTMODEPLUS_I2C1 parameter.
|
||||
* @note For all I2C2 pins fast mode plus driving capability can be disabled
|
||||
* only by using I2C_FASTMODEPLUS_I2C2 parameter.
|
||||
* @note For all I2C3 pins fast mode plus driving capability can be disabled
|
||||
* only by using I2C_FASTMODEPLUS_I2C3 parameter.
|
||||
* @note For all I2C4 pins fast mode plus driving capability can be disabled
|
||||
* only by using I2C_FASTMODEPLUS_I2C4 parameter.
|
||||
* @retval None
|
||||
*/
|
||||
void HAL_I2CEx_DisableFastModePlus(uint32_t ConfigFastModePlus)
|
||||
{
|
||||
/* Check the parameter */
|
||||
assert_param(IS_I2C_FASTMODEPLUS(ConfigFastModePlus));
|
||||
|
||||
/* Enable SYSCFG clock */
|
||||
__HAL_RCC_SYSCFG_CLK_ENABLE();
|
||||
|
||||
/* Disable fast mode plus driving capability for selected pin */
|
||||
CLEAR_BIT(SYSCFG->PMC, (uint32_t)ConfigFastModePlus);
|
||||
}
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
#endif /* Fast Mode Plus Availability */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#endif /* HAL_I2C_MODULE_ENABLED */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
2215
project/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_ltdc.c
Normal file
2215
project/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_ltdc.c
Normal file
File diff suppressed because it is too large
Load Diff
151
project/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_ltdc_ex.c
Normal file
151
project/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_ltdc_ex.c
Normal file
@@ -0,0 +1,151 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f7xx_hal_ltdc_ex.c
|
||||
* @author MCD Application Team
|
||||
* @brief LTDC Extension HAL module driver.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f7xx_hal.h"
|
||||
|
||||
/** @addtogroup STM32F7xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
#if defined(HAL_LTDC_MODULE_ENABLED) && defined(HAL_DSI_MODULE_ENABLED)
|
||||
|
||||
#if defined (LTDC) && defined (DSI)
|
||||
|
||||
/** @defgroup LTDCEx LTDCEx
|
||||
* @brief LTDC HAL module driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Private typedef -----------------------------------------------------------*/
|
||||
/* Private define ------------------------------------------------------------*/
|
||||
/* Private macro -------------------------------------------------------------*/
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
/* Private function prototypes -----------------------------------------------*/
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
|
||||
/** @defgroup LTDCEx_Exported_Functions LTDC Extended Exported Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup LTDCEx_Exported_Functions_Group1 Initialization and Configuration functions
|
||||
* @brief Initialization and Configuration functions
|
||||
*
|
||||
@verbatim
|
||||
===============================================================================
|
||||
##### Initialization and Configuration functions #####
|
||||
===============================================================================
|
||||
[..] This section provides functions allowing to:
|
||||
(+) Initialize and configure the LTDC
|
||||
|
||||
@endverbatim
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Retrieve common parameters from DSI Video mode configuration structure
|
||||
* @param hltdc pointer to a LTDC_HandleTypeDef structure that contains
|
||||
* the configuration information for the LTDC.
|
||||
* @param VidCfg pointer to a DSI_VidCfgTypeDef structure that contains
|
||||
* the DSI video mode configuration parameters
|
||||
* @note The implementation of this function is taking into account the LTDC
|
||||
* polarities inversion as described in the current LTDC specification
|
||||
* @retval HAL status
|
||||
*/
|
||||
HAL_StatusTypeDef HAL_LTDCEx_StructInitFromVideoConfig(LTDC_HandleTypeDef *hltdc, DSI_VidCfgTypeDef *VidCfg)
|
||||
{
|
||||
/* Retrieve signal polarities from DSI */
|
||||
|
||||
/* The following polarity is inverted:
|
||||
LTDC_DEPOLARITY_AL <-> LTDC_DEPOLARITY_AH */
|
||||
|
||||
/* Note 1 : Code in line w/ Current LTDC specification */
|
||||
hltdc->Init.DEPolarity = (VidCfg->DEPolarity == \
|
||||
DSI_DATA_ENABLE_ACTIVE_HIGH) ? LTDC_DEPOLARITY_AL : LTDC_DEPOLARITY_AH;
|
||||
hltdc->Init.VSPolarity = (VidCfg->VSPolarity == DSI_VSYNC_ACTIVE_HIGH) ? LTDC_VSPOLARITY_AH : LTDC_VSPOLARITY_AL;
|
||||
hltdc->Init.HSPolarity = (VidCfg->HSPolarity == DSI_HSYNC_ACTIVE_HIGH) ? LTDC_HSPOLARITY_AH : LTDC_HSPOLARITY_AL;
|
||||
|
||||
/* Note 2: Code to be used in case LTDC polarities inversion updated in the specification */
|
||||
/* hltdc->Init.DEPolarity = VidCfg->DEPolarity << 29;
|
||||
hltdc->Init.VSPolarity = VidCfg->VSPolarity << 29;
|
||||
hltdc->Init.HSPolarity = VidCfg->HSPolarity << 29; */
|
||||
|
||||
/* Retrieve vertical timing parameters from DSI */
|
||||
hltdc->Init.VerticalSync = VidCfg->VerticalSyncActive - 1U;
|
||||
hltdc->Init.AccumulatedVBP = VidCfg->VerticalSyncActive + VidCfg->VerticalBackPorch - 1U;
|
||||
hltdc->Init.AccumulatedActiveH = VidCfg->VerticalSyncActive + VidCfg->VerticalBackPorch + \
|
||||
VidCfg->VerticalActive - 1U;
|
||||
hltdc->Init.TotalHeigh = VidCfg->VerticalSyncActive + VidCfg->VerticalBackPorch + \
|
||||
VidCfg->VerticalActive + VidCfg->VerticalFrontPorch - 1U;
|
||||
|
||||
return HAL_OK;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Retrieve common parameters from DSI Adapted command mode configuration structure
|
||||
* @param hltdc pointer to a LTDC_HandleTypeDef structure that contains
|
||||
* the configuration information for the LTDC.
|
||||
* @param CmdCfg pointer to a DSI_CmdCfgTypeDef structure that contains
|
||||
* the DSI command mode configuration parameters
|
||||
* @note The implementation of this function is taking into account the LTDC
|
||||
* polarities inversion as described in the current LTDC specification
|
||||
* @retval HAL status
|
||||
*/
|
||||
HAL_StatusTypeDef HAL_LTDCEx_StructInitFromAdaptedCommandConfig(LTDC_HandleTypeDef *hltdc, DSI_CmdCfgTypeDef *CmdCfg)
|
||||
{
|
||||
/* Retrieve signal polarities from DSI */
|
||||
|
||||
/* The following polarities are inverted:
|
||||
LTDC_DEPOLARITY_AL <-> LTDC_DEPOLARITY_AH
|
||||
LTDC_VSPOLARITY_AL <-> LTDC_VSPOLARITY_AH
|
||||
LTDC_HSPOLARITY_AL <-> LTDC_HSPOLARITY_AH)*/
|
||||
|
||||
/* Note 1 : Code in line w/ Current LTDC specification */
|
||||
hltdc->Init.DEPolarity = (CmdCfg->DEPolarity == \
|
||||
DSI_DATA_ENABLE_ACTIVE_HIGH) ? LTDC_DEPOLARITY_AL : LTDC_DEPOLARITY_AH;
|
||||
hltdc->Init.VSPolarity = (CmdCfg->VSPolarity == DSI_VSYNC_ACTIVE_HIGH) ? LTDC_VSPOLARITY_AL : LTDC_VSPOLARITY_AH;
|
||||
hltdc->Init.HSPolarity = (CmdCfg->HSPolarity == DSI_HSYNC_ACTIVE_HIGH) ? LTDC_HSPOLARITY_AL : LTDC_HSPOLARITY_AH;
|
||||
|
||||
/* Note 2: Code to be used in case LTDC polarities inversion updated in the specification */
|
||||
/* hltdc->Init.DEPolarity = CmdCfg->DEPolarity << 29;
|
||||
hltdc->Init.VSPolarity = CmdCfg->VSPolarity << 29;
|
||||
hltdc->Init.HSPolarity = CmdCfg->HSPolarity << 29; */
|
||||
|
||||
return HAL_OK;
|
||||
}
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#endif /* LTDC && DSI */
|
||||
|
||||
#endif /* HAL_LTCD_MODULE_ENABLED && HAL_DSI_MODULE_ENABLED */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
597
project/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_pwr.c
Normal file
597
project/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_pwr.c
Normal file
@@ -0,0 +1,597 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f7xx_hal_pwr.c
|
||||
* @author MCD Application Team
|
||||
* @brief PWR HAL module driver.
|
||||
* This file provides firmware functions to manage the following
|
||||
* functionalities of the Power Controller (PWR) peripheral:
|
||||
* + Initialization and de-initialization functions
|
||||
* + Peripheral Control functions
|
||||
*
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f7xx_hal.h"
|
||||
|
||||
/** @addtogroup STM32F7xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup PWR PWR
|
||||
* @brief PWR HAL module driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
#ifdef HAL_PWR_MODULE_ENABLED
|
||||
|
||||
/* Private typedef -----------------------------------------------------------*/
|
||||
/* Private define ------------------------------------------------------------*/
|
||||
/** @addtogroup PWR_Private_Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup PWR_PVD_Mode_Mask PWR PVD Mode Mask
|
||||
* @{
|
||||
*/
|
||||
#define PVD_MODE_IT ((uint32_t)0x00010000U)
|
||||
#define PVD_MODE_EVT ((uint32_t)0x00020000U)
|
||||
#define PVD_RISING_EDGE ((uint32_t)0x00000001U)
|
||||
#define PVD_FALLING_EDGE ((uint32_t)0x00000002U)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup PWR_ENABLE_WUP_Mask PWR Enable WUP Mask
|
||||
* @{
|
||||
*/
|
||||
#define PWR_EWUP_MASK ((uint32_t)0x00003F00)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/* Private macro -------------------------------------------------------------*/
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
/* Private function prototypes -----------------------------------------------*/
|
||||
/* Private functions ---------------------------------------------------------*/
|
||||
|
||||
/** @defgroup PWR_Exported_Functions PWR Exported Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup PWR_Exported_Functions_Group1 Initialization and de-initialization functions
|
||||
* @brief Initialization and de-initialization functions
|
||||
*
|
||||
@verbatim
|
||||
===============================================================================
|
||||
##### Initialization and de-initialization functions #####
|
||||
===============================================================================
|
||||
[..]
|
||||
After reset, the backup domain (RTC registers, RTC backup data
|
||||
registers and backup SRAM) is protected against possible unwanted
|
||||
write accesses.
|
||||
To enable access to the RTC Domain and RTC registers, proceed as follows:
|
||||
(+) Enable the Power Controller (PWR) APB1 interface clock using the
|
||||
__HAL_RCC_PWR_CLK_ENABLE() macro.
|
||||
(+) Enable access to RTC domain using the HAL_PWR_EnableBkUpAccess() function.
|
||||
|
||||
@endverbatim
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Deinitializes the HAL PWR peripheral registers to their default reset values.
|
||||
* @retval None
|
||||
*/
|
||||
void HAL_PWR_DeInit(void)
|
||||
{
|
||||
__HAL_RCC_PWR_FORCE_RESET();
|
||||
__HAL_RCC_PWR_RELEASE_RESET();
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Enables access to the backup domain (RTC registers, RTC
|
||||
* backup data registers and backup SRAM).
|
||||
* @note If the HSE divided by 2, 3, ..31 is used as the RTC clock, the
|
||||
* Backup Domain Access should be kept enabled.
|
||||
* @retval None
|
||||
*/
|
||||
void HAL_PWR_EnableBkUpAccess(void)
|
||||
{
|
||||
/* Enable access to RTC and backup registers */
|
||||
SET_BIT(PWR->CR1, PWR_CR1_DBP);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Disables access to the backup domain (RTC registers, RTC
|
||||
* backup data registers and backup SRAM).
|
||||
* @note If the HSE divided by 2, 3, ..31 is used as the RTC clock, the
|
||||
* Backup Domain Access should be kept enabled.
|
||||
* @retval None
|
||||
*/
|
||||
void HAL_PWR_DisableBkUpAccess(void)
|
||||
{
|
||||
/* Disable access to RTC and backup registers */
|
||||
CLEAR_BIT(PWR->CR1, PWR_CR1_DBP);
|
||||
}
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup PWR_Exported_Functions_Group2 Peripheral Control functions
|
||||
* @brief Low Power modes configuration functions
|
||||
*
|
||||
@verbatim
|
||||
|
||||
===============================================================================
|
||||
##### Peripheral Control functions #####
|
||||
===============================================================================
|
||||
|
||||
*** PVD configuration ***
|
||||
=========================
|
||||
[..]
|
||||
(+) The PVD is used to monitor the VDD power supply by comparing it to a
|
||||
threshold selected by the PVD Level (PLS[2:0] bits in the PWR_CR).
|
||||
(+) A PVDO flag is available to indicate if VDD/VDDA is higher or lower
|
||||
than the PVD threshold. This event is internally connected to the EXTI
|
||||
line16 and can generate an interrupt if enabled. This is done through
|
||||
__HAL_PWR_PVD_EXTI_ENABLE_IT() macro.
|
||||
(+) The PVD is stopped in Standby mode.
|
||||
|
||||
*** Wake-up pin configuration ***
|
||||
================================
|
||||
[..]
|
||||
(+) Wake-up pin is used to wake up the system from Standby mode. This pin is
|
||||
forced in input pull-down configuration and is active on rising edges.
|
||||
(+) There are up to 6 Wake-up pin in the STM32F7 devices family
|
||||
|
||||
*** Low Power modes configuration ***
|
||||
=====================================
|
||||
[..]
|
||||
The devices feature 3 low-power modes:
|
||||
(+) Sleep mode: Cortex-M7 core stopped, peripherals kept running.
|
||||
(+) Stop mode: all clocks are stopped, regulator running, regulator
|
||||
in low power mode
|
||||
(+) Standby mode: 1.2V domain powered off.
|
||||
|
||||
*** Sleep mode ***
|
||||
==================
|
||||
[..]
|
||||
(+) Entry:
|
||||
The Sleep mode is entered by using the HAL_PWR_EnterSLEEPMode(PWR_MAINREGULATOR_ON, PWR_SLEEPENTRY_WFI)
|
||||
functions with
|
||||
(++) PWR_SLEEPENTRY_WFI: enter SLEEP mode with WFI instruction
|
||||
(++) PWR_SLEEPENTRY_WFE: enter SLEEP mode with WFE instruction
|
||||
|
||||
-@@- The Regulator parameter is not used for the STM32F7 family
|
||||
and is kept as parameter just to maintain compatibility with the
|
||||
lower power families (STM32L).
|
||||
(+) Exit:
|
||||
Any peripheral interrupt acknowledged by the nested vectored interrupt
|
||||
controller (NVIC) can wake up the device from Sleep mode.
|
||||
|
||||
*** Stop mode ***
|
||||
=================
|
||||
[..]
|
||||
In Stop mode, all clocks in the 1.2V domain are stopped, the PLL, the HSI,
|
||||
and the HSE RC oscillators are disabled. Internal SRAM and register contents
|
||||
are preserved.
|
||||
The voltage regulator can be configured either in normal or low-power mode.
|
||||
To minimize the consumption In Stop mode, FLASH can be powered off before
|
||||
entering the Stop mode using the HAL_PWREx_EnableFlashPowerDown() function.
|
||||
It can be switched on again by software after exiting the Stop mode using
|
||||
the HAL_PWREx_DisableFlashPowerDown() function.
|
||||
|
||||
(+) Entry:
|
||||
The Stop mode is entered using the HAL_PWR_EnterSTOPMode(PWR_MAINREGULATOR_ON)
|
||||
function with:
|
||||
(++) Main regulator ON.
|
||||
(++) Low Power regulator ON.
|
||||
(+) Exit:
|
||||
Any EXTI Line (Internal or External) configured in Interrupt/Event mode.
|
||||
|
||||
*** Standby mode ***
|
||||
====================
|
||||
[..]
|
||||
(+)
|
||||
The Standby mode allows to achieve the lowest power consumption. It is based
|
||||
on the Cortex-M7 deep sleep mode, with the voltage regulator disabled.
|
||||
The 1.2V domain is consequently powered off. The PLL, the HSI oscillator and
|
||||
the HSE oscillator are also switched off. SRAM and register contents are lost
|
||||
except for the RTC registers, RTC backup registers, backup SRAM and Standby
|
||||
circuitry.
|
||||
|
||||
The voltage regulator is OFF.
|
||||
|
||||
(++) Entry:
|
||||
(+++) The Standby mode is entered using the HAL_PWR_EnterSTANDBYMode() function.
|
||||
(++) Exit:
|
||||
(+++) WKUP pin rising or falling edge, RTC alarm (Alarm A and Alarm B), RTC
|
||||
wakeup, tamper event, time stamp event, external reset in NRST pin, IWDG reset.
|
||||
|
||||
*** Auto-wakeup (AWU) from low-power mode ***
|
||||
=============================================
|
||||
[..]
|
||||
|
||||
(+) The MCU can be woken up from low-power mode by an RTC Alarm event, an RTC
|
||||
Wakeup event, a tamper event or a time-stamp event, without depending on
|
||||
an external interrupt (Auto-wakeup mode).
|
||||
|
||||
(+) RTC auto-wakeup (AWU) from the Stop and Standby modes
|
||||
|
||||
(++) To wake up from the Stop mode with an RTC alarm event, it is necessary to
|
||||
configure the RTC to generate the RTC alarm using the HAL_RTC_SetAlarm_IT() function.
|
||||
|
||||
(++) To wake up from the Stop mode with an RTC Tamper or time stamp event, it
|
||||
is necessary to configure the RTC to detect the tamper or time stamp event using the
|
||||
HAL_RTCEx_SetTimeStamp_IT() or HAL_RTCEx_SetTamper_IT() functions.
|
||||
|
||||
(++) To wake up from the Stop mode with an RTC WakeUp event, it is necessary to
|
||||
configure the RTC to generate the RTC WakeUp event using the HAL_RTCEx_SetWakeUpTimer_IT() function.
|
||||
|
||||
@endverbatim
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Configures the voltage threshold detected by the Power Voltage Detector(PVD).
|
||||
* @param sConfigPVD pointer to an PWR_PVDTypeDef structure that contains the configuration
|
||||
* information for the PVD.
|
||||
* @note Refer to the electrical characteristics of your device datasheet for
|
||||
* more details about the voltage threshold corresponding to each
|
||||
* detection level.
|
||||
* @retval None
|
||||
*/
|
||||
void HAL_PWR_ConfigPVD(PWR_PVDTypeDef *sConfigPVD)
|
||||
{
|
||||
/* Check the parameters */
|
||||
assert_param(IS_PWR_PVD_LEVEL(sConfigPVD->PVDLevel));
|
||||
assert_param(IS_PWR_PVD_MODE(sConfigPVD->Mode));
|
||||
|
||||
/* Set PLS[7:5] bits according to PVDLevel value */
|
||||
MODIFY_REG(PWR->CR1, PWR_CR1_PLS, sConfigPVD->PVDLevel);
|
||||
|
||||
/* Clear any previous config. Keep it clear if no event or IT mode is selected */
|
||||
__HAL_PWR_PVD_EXTI_DISABLE_EVENT();
|
||||
__HAL_PWR_PVD_EXTI_DISABLE_IT();
|
||||
__HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE();
|
||||
__HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE();
|
||||
|
||||
/* Configure interrupt mode */
|
||||
if((sConfigPVD->Mode & PVD_MODE_IT) == PVD_MODE_IT)
|
||||
{
|
||||
__HAL_PWR_PVD_EXTI_ENABLE_IT();
|
||||
}
|
||||
|
||||
/* Configure event mode */
|
||||
if((sConfigPVD->Mode & PVD_MODE_EVT) == PVD_MODE_EVT)
|
||||
{
|
||||
__HAL_PWR_PVD_EXTI_ENABLE_EVENT();
|
||||
}
|
||||
|
||||
/* Configure the edge */
|
||||
if((sConfigPVD->Mode & PVD_RISING_EDGE) == PVD_RISING_EDGE)
|
||||
{
|
||||
__HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE();
|
||||
}
|
||||
|
||||
if((sConfigPVD->Mode & PVD_FALLING_EDGE) == PVD_FALLING_EDGE)
|
||||
{
|
||||
__HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE();
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Enables the Power Voltage Detector(PVD).
|
||||
* @retval None
|
||||
*/
|
||||
void HAL_PWR_EnablePVD(void)
|
||||
{
|
||||
/* Enable the power voltage detector */
|
||||
SET_BIT(PWR->CR1, PWR_CR1_PVDE);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Disables the Power Voltage Detector(PVD).
|
||||
* @retval None
|
||||
*/
|
||||
void HAL_PWR_DisablePVD(void)
|
||||
{
|
||||
/* Disable the power voltage detector */
|
||||
CLEAR_BIT(PWR->CR1, PWR_CR1_PVDE);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Enable the WakeUp PINx functionality.
|
||||
* @param WakeUpPinPolarity Specifies which Wake-Up pin to enable.
|
||||
* This parameter can be one of the following legacy values, which sets the default polarity:
|
||||
* detection on high level (rising edge):
|
||||
* @arg PWR_WAKEUP_PIN1, PWR_WAKEUP_PIN2, PWR_WAKEUP_PIN3, PWR_WAKEUP_PIN4, PWR_WAKEUP_PIN5, PWR_WAKEUP_PIN6
|
||||
* or one of the following value where the user can explicitly states the enabled pin and
|
||||
* the chosen polarity
|
||||
* @arg PWR_WAKEUP_PIN1_HIGH or PWR_WAKEUP_PIN1_LOW
|
||||
* @arg PWR_WAKEUP_PIN2_HIGH or PWR_WAKEUP_PIN2_LOW
|
||||
* @arg PWR_WAKEUP_PIN3_HIGH or PWR_WAKEUP_PIN3_LOW
|
||||
* @arg PWR_WAKEUP_PIN4_HIGH or PWR_WAKEUP_PIN4_LOW
|
||||
* @arg PWR_WAKEUP_PIN5_HIGH or PWR_WAKEUP_PIN5_LOW
|
||||
* @arg PWR_WAKEUP_PIN6_HIGH or PWR_WAKEUP_PIN6_LOW
|
||||
* @note PWR_WAKEUP_PINx and PWR_WAKEUP_PINx_HIGH are equivalent.
|
||||
* @retval None
|
||||
*/
|
||||
void HAL_PWR_EnableWakeUpPin(uint32_t WakeUpPinPolarity)
|
||||
{
|
||||
assert_param(IS_PWR_WAKEUP_PIN(WakeUpPinPolarity));
|
||||
|
||||
/* Enable wake-up pin */
|
||||
SET_BIT(PWR->CSR2, (PWR_EWUP_MASK & WakeUpPinPolarity));
|
||||
|
||||
/* Specifies the Wake-Up pin polarity for the event detection
|
||||
(rising or falling edge) */
|
||||
MODIFY_REG(PWR->CR2, (PWR_EWUP_MASK & WakeUpPinPolarity), (WakeUpPinPolarity >> 0x06));
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Disables the WakeUp PINx functionality.
|
||||
* @param WakeUpPinx Specifies the Power Wake-Up pin to disable.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg PWR_WAKEUP_PIN1
|
||||
* @arg PWR_WAKEUP_PIN2
|
||||
* @arg PWR_WAKEUP_PIN3
|
||||
* @arg PWR_WAKEUP_PIN4
|
||||
* @arg PWR_WAKEUP_PIN5
|
||||
* @arg PWR_WAKEUP_PIN6
|
||||
* @retval None
|
||||
*/
|
||||
void HAL_PWR_DisableWakeUpPin(uint32_t WakeUpPinx)
|
||||
{
|
||||
assert_param(IS_PWR_WAKEUP_PIN(WakeUpPinx));
|
||||
|
||||
CLEAR_BIT(PWR->CSR2, WakeUpPinx);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Enters Sleep mode.
|
||||
*
|
||||
* @note In Sleep mode, all I/O pins keep the same state as in Run mode.
|
||||
*
|
||||
* @note In Sleep mode, the systick is stopped to avoid exit from this mode with
|
||||
* systick interrupt when used as time base for Timeout
|
||||
*
|
||||
* @param Regulator Specifies the regulator state in SLEEP mode.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg PWR_MAINREGULATOR_ON: SLEEP mode with regulator ON
|
||||
* @arg PWR_LOWPOWERREGULATOR_ON: SLEEP mode with low power regulator ON
|
||||
* @note This parameter is not used for the STM32F7 family and is kept as parameter
|
||||
* just to maintain compatibility with the lower power families.
|
||||
* @param SLEEPEntry Specifies if SLEEP mode in entered with WFI or WFE instruction.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg PWR_SLEEPENTRY_WFI: enter SLEEP mode with WFI instruction
|
||||
* @arg PWR_SLEEPENTRY_WFE: enter SLEEP mode with WFE instruction
|
||||
* @retval None
|
||||
*/
|
||||
void HAL_PWR_EnterSLEEPMode(uint32_t Regulator, uint8_t SLEEPEntry)
|
||||
{
|
||||
/* Check the parameters */
|
||||
assert_param(IS_PWR_REGULATOR(Regulator));
|
||||
assert_param(IS_PWR_SLEEP_ENTRY(SLEEPEntry));
|
||||
|
||||
/* Clear SLEEPDEEP bit of Cortex System Control Register */
|
||||
CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk));
|
||||
|
||||
/* Ensure that all instructions done before entering SLEEP mode */
|
||||
__DSB();
|
||||
__ISB();
|
||||
|
||||
/* Select SLEEP mode entry -------------------------------------------------*/
|
||||
if(SLEEPEntry == PWR_SLEEPENTRY_WFI)
|
||||
{
|
||||
/* Request Wait For Interrupt */
|
||||
__WFI();
|
||||
}
|
||||
else
|
||||
{
|
||||
/* Request Wait For Event */
|
||||
__SEV();
|
||||
__WFE();
|
||||
__WFE();
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Enters Stop mode.
|
||||
* @note In Stop mode, all I/O pins keep the same state as in Run mode.
|
||||
* @note When exiting Stop mode by issuing an interrupt or a wakeup event,
|
||||
* the HSI RC oscillator is selected as system clock.
|
||||
* @note When the voltage regulator operates in low power mode, an additional
|
||||
* startup delay is incurred when waking up from Stop mode.
|
||||
* By keeping the internal regulator ON during Stop mode, the consumption
|
||||
* is higher although the startup time is reduced.
|
||||
* @param Regulator Specifies the regulator state in Stop mode.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg PWR_MAINREGULATOR_ON: Stop mode with regulator ON
|
||||
* @arg PWR_LOWPOWERREGULATOR_ON: Stop mode with low power regulator ON
|
||||
* @param STOPEntry Specifies if Stop mode in entered with WFI or WFE instruction.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg PWR_STOPENTRY_WFI: Enter Stop mode with WFI instruction
|
||||
* @arg PWR_STOPENTRY_WFE: Enter Stop mode with WFE instruction
|
||||
* @retval None
|
||||
*/
|
||||
void HAL_PWR_EnterSTOPMode(uint32_t Regulator, uint8_t STOPEntry)
|
||||
{
|
||||
uint32_t tmpreg = 0;
|
||||
|
||||
/* Check the parameters */
|
||||
assert_param(IS_PWR_REGULATOR(Regulator));
|
||||
assert_param(IS_PWR_STOP_ENTRY(STOPEntry));
|
||||
|
||||
/* Select the regulator state in Stop mode ---------------------------------*/
|
||||
tmpreg = PWR->CR1;
|
||||
/* Clear PDDS and LPDS bits */
|
||||
tmpreg &= (uint32_t)~(PWR_CR1_PDDS | PWR_CR1_LPDS);
|
||||
|
||||
/* Set LPDS, MRLVDS and LPLVDS bits according to Regulator value */
|
||||
tmpreg |= Regulator;
|
||||
|
||||
/* Store the new value */
|
||||
PWR->CR1 = tmpreg;
|
||||
|
||||
/* Set SLEEPDEEP bit of Cortex System Control Register */
|
||||
SCB->SCR |= SCB_SCR_SLEEPDEEP_Msk;
|
||||
|
||||
/* Ensure that all instructions done before entering STOP mode */
|
||||
__DSB();
|
||||
__ISB();
|
||||
|
||||
/* Select Stop mode entry --------------------------------------------------*/
|
||||
if(STOPEntry == PWR_STOPENTRY_WFI)
|
||||
{
|
||||
/* Request Wait For Interrupt */
|
||||
__WFI();
|
||||
}
|
||||
else
|
||||
{
|
||||
/* Request Wait For Event */
|
||||
__SEV();
|
||||
__WFE();
|
||||
__WFE();
|
||||
}
|
||||
/* Reset SLEEPDEEP bit of Cortex System Control Register */
|
||||
SCB->SCR &= (uint32_t)~((uint32_t)SCB_SCR_SLEEPDEEP_Msk);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Enters Standby mode.
|
||||
* @note In Standby mode, all I/O pins are high impedance except for:
|
||||
* - Reset pad (still available)
|
||||
* - RTC_AF1 pin (PC13) if configured for tamper, time-stamp, RTC
|
||||
* Alarm out, or RTC clock calibration out.
|
||||
* - RTC_AF2 pin (PI8) if configured for tamper or time-stamp.
|
||||
* - WKUP pins if enabled.
|
||||
* @retval None
|
||||
*/
|
||||
void HAL_PWR_EnterSTANDBYMode(void)
|
||||
{
|
||||
/* Select Standby mode */
|
||||
PWR->CR1 |= PWR_CR1_PDDS;
|
||||
|
||||
/* Set SLEEPDEEP bit of Cortex System Control Register */
|
||||
SCB->SCR |= SCB_SCR_SLEEPDEEP_Msk;
|
||||
|
||||
/* This option is used to ensure that store operations are completed */
|
||||
#if defined ( __CC_ARM)
|
||||
__force_stores();
|
||||
#endif
|
||||
/* Request Wait For Interrupt */
|
||||
__WFI();
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles the PWR PVD interrupt request.
|
||||
* @note This API should be called under the PVD_IRQHandler().
|
||||
* @retval None
|
||||
*/
|
||||
void HAL_PWR_PVD_IRQHandler(void)
|
||||
{
|
||||
/* Check PWR Exti flag */
|
||||
if(__HAL_PWR_PVD_EXTI_GET_FLAG() != RESET)
|
||||
{
|
||||
/* PWR PVD interrupt user callback */
|
||||
HAL_PWR_PVDCallback();
|
||||
|
||||
/* Clear PWR Exti pending bit */
|
||||
__HAL_PWR_PVD_EXTI_CLEAR_FLAG();
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief PWR PVD interrupt callback
|
||||
* @retval None
|
||||
*/
|
||||
__weak void HAL_PWR_PVDCallback(void)
|
||||
{
|
||||
/* NOTE : This function Should not be modified, when the callback is needed,
|
||||
the HAL_PWR_PVDCallback could be implemented in the user file
|
||||
*/
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Indicates Sleep-On-Exit when returning from Handler mode to Thread mode.
|
||||
* @note Set SLEEPONEXIT bit of SCR register. When this bit is set, the processor
|
||||
* re-enters SLEEP mode when an interruption handling is over.
|
||||
* Setting this bit is useful when the processor is expected to run only on
|
||||
* interruptions handling.
|
||||
* @retval None
|
||||
*/
|
||||
void HAL_PWR_EnableSleepOnExit(void)
|
||||
{
|
||||
/* Set SLEEPONEXIT bit of Cortex System Control Register */
|
||||
SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPONEXIT_Msk));
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Disables Sleep-On-Exit feature when returning from Handler mode to Thread mode.
|
||||
* @note Clears SLEEPONEXIT bit of SCR register. When this bit is set, the processor
|
||||
* re-enters SLEEP mode when an interruption handling is over.
|
||||
* @retval None
|
||||
*/
|
||||
void HAL_PWR_DisableSleepOnExit(void)
|
||||
{
|
||||
/* Clear SLEEPONEXIT bit of Cortex System Control Register */
|
||||
CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPONEXIT_Msk));
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Enables CORTEX M4 SEVONPEND bit.
|
||||
* @note Sets SEVONPEND bit of SCR register. When this bit is set, this causes
|
||||
* WFE to wake up when an interrupt moves from inactive to pended.
|
||||
* @retval None
|
||||
*/
|
||||
void HAL_PWR_EnableSEVOnPend(void)
|
||||
{
|
||||
/* Set SEVONPEND bit of Cortex System Control Register */
|
||||
SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SEVONPEND_Msk));
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Disables CORTEX M4 SEVONPEND bit.
|
||||
* @note Clears SEVONPEND bit of SCR register. When this bit is set, this causes
|
||||
* WFE to wake up when an interrupt moves from inactive to pended.
|
||||
* @retval None
|
||||
*/
|
||||
void HAL_PWR_DisableSEVOnPend(void)
|
||||
{
|
||||
/* Clear SEVONPEND bit of Cortex System Control Register */
|
||||
CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SEVONPEND_Msk));
|
||||
}
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#endif /* HAL_PWR_MODULE_ENABLED */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
552
project/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_pwr_ex.c
Normal file
552
project/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_pwr_ex.c
Normal file
@@ -0,0 +1,552 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f7xx_hal_pwr_ex.c
|
||||
* @author MCD Application Team
|
||||
* @brief Extended PWR HAL module driver.
|
||||
* This file provides firmware functions to manage the following
|
||||
* functionalities of PWR extension peripheral:
|
||||
* + Peripheral Extended features functions
|
||||
*
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f7xx_hal.h"
|
||||
|
||||
/** @addtogroup STM32F7xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup PWREx PWREx
|
||||
* @brief PWR HAL module driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
#ifdef HAL_PWR_MODULE_ENABLED
|
||||
|
||||
/* Private typedef -----------------------------------------------------------*/
|
||||
/* Private define ------------------------------------------------------------*/
|
||||
/** @addtogroup PWREx_Private_Constants
|
||||
* @{
|
||||
*/
|
||||
#define PWR_OVERDRIVE_TIMEOUT_VALUE 1000
|
||||
#define PWR_UDERDRIVE_TIMEOUT_VALUE 1000
|
||||
#define PWR_BKPREG_TIMEOUT_VALUE 1000
|
||||
#define PWR_VOSRDY_TIMEOUT_VALUE 1000
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private macro -------------------------------------------------------------*/
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
/* Private function prototypes -----------------------------------------------*/
|
||||
/* Private functions ---------------------------------------------------------*/
|
||||
/** @defgroup PWREx_Exported_Functions PWREx Exported Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup PWREx_Exported_Functions_Group1 Peripheral Extended features functions
|
||||
* @brief Peripheral Extended features functions
|
||||
*
|
||||
@verbatim
|
||||
|
||||
===============================================================================
|
||||
##### Peripheral extended features functions #####
|
||||
===============================================================================
|
||||
|
||||
*** Main and Backup Regulators configuration ***
|
||||
================================================
|
||||
[..]
|
||||
(+) The backup domain includes 4 Kbytes of backup SRAM accessible only from
|
||||
the CPU, and address in 32-bit, 16-bit or 8-bit mode. Its content is
|
||||
retained even in Standby or VBAT mode when the low power backup regulator
|
||||
is enabled. It can be considered as an internal EEPROM when VBAT is
|
||||
always present. You can use the HAL_PWREx_EnableBkUpReg() function to
|
||||
enable the low power backup regulator.
|
||||
|
||||
(+) When the backup domain is supplied by VDD (analog switch connected to VDD)
|
||||
the backup SRAM is powered from VDD which replaces the VBAT power supply to
|
||||
save battery life.
|
||||
|
||||
(+) The backup SRAM is not mass erased by a tamper event. It is read
|
||||
protected to prevent confidential data, such as cryptographic private
|
||||
key, from being accessed. The backup SRAM can be erased only through
|
||||
the Flash interface when a protection level change from level 1 to
|
||||
level 0 is requested.
|
||||
-@- Refer to the description of Read protection (RDP) in the Flash
|
||||
programming manual.
|
||||
|
||||
(+) The main internal regulator can be configured to have a tradeoff between
|
||||
performance and power consumption when the device does not operate at
|
||||
the maximum frequency. This is done through __HAL_PWR_MAINREGULATORMODE_CONFIG()
|
||||
macro which configure VOS bit in PWR_CR register
|
||||
|
||||
Refer to the product datasheets for more details.
|
||||
|
||||
*** FLASH Power Down configuration ****
|
||||
=======================================
|
||||
[..]
|
||||
(+) By setting the FPDS bit in the PWR_CR register by using the
|
||||
HAL_PWREx_EnableFlashPowerDown() function, the Flash memory also enters power
|
||||
down mode when the device enters Stop mode. When the Flash memory
|
||||
is in power down mode, an additional startup delay is incurred when
|
||||
waking up from Stop mode.
|
||||
|
||||
*** Over-Drive and Under-Drive configuration ****
|
||||
=================================================
|
||||
[..]
|
||||
(+) In Run mode: the main regulator has 2 operating modes available:
|
||||
(++) Normal mode: The CPU and core logic operate at maximum frequency at a given
|
||||
voltage scaling (scale 1, scale 2 or scale 3)
|
||||
(++) Over-drive mode: This mode allows the CPU and the core logic to operate at a
|
||||
higher frequency than the normal mode for a given voltage scaling (scale 1,
|
||||
scale 2 or scale 3). This mode is enabled through HAL_PWREx_EnableOverDrive() function and
|
||||
disabled by HAL_PWREx_DisableOverDrive() function, to enter or exit from Over-drive mode please follow
|
||||
the sequence described in Reference manual.
|
||||
|
||||
(+) In Stop mode: the main regulator or low power regulator supplies a low power
|
||||
voltage to the 1.2V domain, thus preserving the content of registers
|
||||
and internal SRAM. 2 operating modes are available:
|
||||
(++) Normal mode: the 1.2V domain is preserved in nominal leakage mode. This mode is only
|
||||
available when the main regulator or the low power regulator is used in Scale 3 or
|
||||
low voltage mode.
|
||||
(++) Under-drive mode: the 1.2V domain is preserved in reduced leakage mode. This mode is only
|
||||
available when the main regulator or the low power regulator is in low voltage mode.
|
||||
|
||||
@endverbatim
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Enables the Backup Regulator.
|
||||
* @retval HAL status
|
||||
*/
|
||||
HAL_StatusTypeDef HAL_PWREx_EnableBkUpReg(void)
|
||||
{
|
||||
uint32_t tickstart = 0;
|
||||
|
||||
/* Enable Backup regulator */
|
||||
PWR->CSR1 |= PWR_CSR1_BRE;
|
||||
|
||||
/* Workaround for the following hardware bug: */
|
||||
/* Id 19: PWR : No STANDBY wake-up when Back-up RAM enabled (ref. Errata Sheet p23) */
|
||||
PWR->CSR1 |= PWR_CSR1_EIWUP;
|
||||
|
||||
/* Get tick */
|
||||
tickstart = HAL_GetTick();
|
||||
|
||||
/* Wait till Backup regulator ready flag is set */
|
||||
while(__HAL_PWR_GET_FLAG(PWR_FLAG_BRR) == RESET)
|
||||
{
|
||||
if((HAL_GetTick() - tickstart ) > PWR_BKPREG_TIMEOUT_VALUE)
|
||||
{
|
||||
return HAL_TIMEOUT;
|
||||
}
|
||||
}
|
||||
return HAL_OK;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Disables the Backup Regulator.
|
||||
* @retval HAL status
|
||||
*/
|
||||
HAL_StatusTypeDef HAL_PWREx_DisableBkUpReg(void)
|
||||
{
|
||||
uint32_t tickstart = 0;
|
||||
|
||||
/* Disable Backup regulator */
|
||||
PWR->CSR1 &= (uint32_t)~((uint32_t)PWR_CSR1_BRE);
|
||||
|
||||
/* Workaround for the following hardware bug: */
|
||||
/* Id 19: PWR : No STANDBY wake-up when Back-up RAM enabled (ref. Errata Sheet p23) */
|
||||
PWR->CSR1 |= PWR_CSR1_EIWUP;
|
||||
|
||||
/* Get tick */
|
||||
tickstart = HAL_GetTick();
|
||||
|
||||
/* Wait till Backup regulator ready flag is set */
|
||||
while(__HAL_PWR_GET_FLAG(PWR_FLAG_BRR) != RESET)
|
||||
{
|
||||
if((HAL_GetTick() - tickstart ) > PWR_BKPREG_TIMEOUT_VALUE)
|
||||
{
|
||||
return HAL_TIMEOUT;
|
||||
}
|
||||
}
|
||||
return HAL_OK;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Enables the Flash Power Down in Stop mode.
|
||||
* @retval None
|
||||
*/
|
||||
void HAL_PWREx_EnableFlashPowerDown(void)
|
||||
{
|
||||
/* Enable the Flash Power Down */
|
||||
PWR->CR1 |= PWR_CR1_FPDS;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Disables the Flash Power Down in Stop mode.
|
||||
* @retval None
|
||||
*/
|
||||
void HAL_PWREx_DisableFlashPowerDown(void)
|
||||
{
|
||||
/* Disable the Flash Power Down */
|
||||
PWR->CR1 &= (uint32_t)~((uint32_t)PWR_CR1_FPDS);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Enables Main Regulator low voltage mode.
|
||||
* @retval None
|
||||
*/
|
||||
void HAL_PWREx_EnableMainRegulatorLowVoltage(void)
|
||||
{
|
||||
/* Enable Main regulator low voltage */
|
||||
PWR->CR1 |= PWR_CR1_MRUDS;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Disables Main Regulator low voltage mode.
|
||||
* @retval None
|
||||
*/
|
||||
void HAL_PWREx_DisableMainRegulatorLowVoltage(void)
|
||||
{
|
||||
/* Disable Main regulator low voltage */
|
||||
PWR->CR1 &= (uint32_t)~((uint32_t)PWR_CR1_MRUDS);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Enables Low Power Regulator low voltage mode.
|
||||
* @retval None
|
||||
*/
|
||||
void HAL_PWREx_EnableLowRegulatorLowVoltage(void)
|
||||
{
|
||||
/* Enable low power regulator */
|
||||
PWR->CR1 |= PWR_CR1_LPUDS;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Disables Low Power Regulator low voltage mode.
|
||||
* @retval None
|
||||
*/
|
||||
void HAL_PWREx_DisableLowRegulatorLowVoltage(void)
|
||||
{
|
||||
/* Disable low power regulator */
|
||||
PWR->CR1 &= (uint32_t)~((uint32_t)PWR_CR1_LPUDS);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Activates the Over-Drive mode.
|
||||
* @note This mode allows the CPU and the core logic to operate at a higher frequency
|
||||
* than the normal mode for a given voltage scaling (scale 1, scale 2 or scale 3).
|
||||
* @note It is recommended to enter or exit Over-drive mode when the application is not running
|
||||
* critical tasks and when the system clock source is either HSI or HSE.
|
||||
* During the Over-drive switch activation, no peripheral clocks should be enabled.
|
||||
* The peripheral clocks must be enabled once the Over-drive mode is activated.
|
||||
* @retval HAL status
|
||||
*/
|
||||
HAL_StatusTypeDef HAL_PWREx_EnableOverDrive(void)
|
||||
{
|
||||
uint32_t tickstart = 0;
|
||||
|
||||
__HAL_RCC_PWR_CLK_ENABLE();
|
||||
|
||||
/* Enable the Over-drive to extend the clock frequency to 216 MHz */
|
||||
__HAL_PWR_OVERDRIVE_ENABLE();
|
||||
|
||||
/* Get tick */
|
||||
tickstart = HAL_GetTick();
|
||||
|
||||
while(!__HAL_PWR_GET_FLAG(PWR_FLAG_ODRDY))
|
||||
{
|
||||
if((HAL_GetTick() - tickstart ) > PWR_OVERDRIVE_TIMEOUT_VALUE)
|
||||
{
|
||||
return HAL_TIMEOUT;
|
||||
}
|
||||
}
|
||||
|
||||
/* Enable the Over-drive switch */
|
||||
__HAL_PWR_OVERDRIVESWITCHING_ENABLE();
|
||||
|
||||
/* Get tick */
|
||||
tickstart = HAL_GetTick();
|
||||
|
||||
while(!__HAL_PWR_GET_FLAG(PWR_FLAG_ODSWRDY))
|
||||
{
|
||||
if((HAL_GetTick() - tickstart ) > PWR_OVERDRIVE_TIMEOUT_VALUE)
|
||||
{
|
||||
return HAL_TIMEOUT;
|
||||
}
|
||||
}
|
||||
return HAL_OK;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Deactivates the Over-Drive mode.
|
||||
* @note This mode allows the CPU and the core logic to operate at a higher frequency
|
||||
* than the normal mode for a given voltage scaling (scale 1, scale 2 or scale 3).
|
||||
* @note It is recommended to enter or exit Over-drive mode when the application is not running
|
||||
* critical tasks and when the system clock source is either HSI or HSE.
|
||||
* During the Over-drive switch activation, no peripheral clocks should be enabled.
|
||||
* The peripheral clocks must be enabled once the Over-drive mode is activated.
|
||||
* @retval HAL status
|
||||
*/
|
||||
HAL_StatusTypeDef HAL_PWREx_DisableOverDrive(void)
|
||||
{
|
||||
uint32_t tickstart = 0;
|
||||
|
||||
__HAL_RCC_PWR_CLK_ENABLE();
|
||||
|
||||
/* Disable the Over-drive switch */
|
||||
__HAL_PWR_OVERDRIVESWITCHING_DISABLE();
|
||||
|
||||
/* Get tick */
|
||||
tickstart = HAL_GetTick();
|
||||
|
||||
while(__HAL_PWR_GET_FLAG(PWR_FLAG_ODSWRDY))
|
||||
{
|
||||
if((HAL_GetTick() - tickstart ) > PWR_OVERDRIVE_TIMEOUT_VALUE)
|
||||
{
|
||||
return HAL_TIMEOUT;
|
||||
}
|
||||
}
|
||||
|
||||
/* Disable the Over-drive */
|
||||
__HAL_PWR_OVERDRIVE_DISABLE();
|
||||
|
||||
/* Get tick */
|
||||
tickstart = HAL_GetTick();
|
||||
|
||||
while(__HAL_PWR_GET_FLAG(PWR_FLAG_ODRDY))
|
||||
{
|
||||
if((HAL_GetTick() - tickstart ) > PWR_OVERDRIVE_TIMEOUT_VALUE)
|
||||
{
|
||||
return HAL_TIMEOUT;
|
||||
}
|
||||
}
|
||||
|
||||
return HAL_OK;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Enters in Under-Drive STOP mode.
|
||||
*
|
||||
* @note This mode can be selected only when the Under-Drive is already active
|
||||
*
|
||||
* @note This mode is enabled only with STOP low power mode.
|
||||
* In this mode, the 1.2V domain is preserved in reduced leakage mode. This
|
||||
* mode is only available when the main regulator or the low power regulator
|
||||
* is in low voltage mode
|
||||
*
|
||||
* @note If the Under-drive mode was enabled, it is automatically disabled after
|
||||
* exiting Stop mode.
|
||||
* When the voltage regulator operates in Under-drive mode, an additional
|
||||
* startup delay is induced when waking up from Stop mode.
|
||||
*
|
||||
* @note In Stop mode, all I/O pins keep the same state as in Run mode.
|
||||
*
|
||||
* @note When exiting Stop mode by issuing an interrupt or a wakeup event,
|
||||
* the HSI RC oscillator is selected as system clock.
|
||||
*
|
||||
* @note When the voltage regulator operates in low power mode, an additional
|
||||
* startup delay is incurred when waking up from Stop mode.
|
||||
* By keeping the internal regulator ON during Stop mode, the consumption
|
||||
* is higher although the startup time is reduced.
|
||||
*
|
||||
* @param Regulator specifies the regulator state in STOP mode.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg PWR_MAINREGULATOR_UNDERDRIVE_ON: Main Regulator in under-drive mode
|
||||
* and Flash memory in power-down when the device is in Stop under-drive mode
|
||||
* @arg PWR_LOWPOWERREGULATOR_UNDERDRIVE_ON: Low Power Regulator in under-drive mode
|
||||
* and Flash memory in power-down when the device is in Stop under-drive mode
|
||||
* @param STOPEntry specifies if STOP mode in entered with WFI or WFE instruction.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg PWR_SLEEPENTRY_WFI: enter STOP mode with WFI instruction
|
||||
* @arg PWR_SLEEPENTRY_WFE: enter STOP mode with WFE instruction
|
||||
* @retval None
|
||||
*/
|
||||
HAL_StatusTypeDef HAL_PWREx_EnterUnderDriveSTOPMode(uint32_t Regulator, uint8_t STOPEntry)
|
||||
{
|
||||
uint32_t tempreg = 0;
|
||||
uint32_t tickstart = 0;
|
||||
|
||||
/* Check the parameters */
|
||||
assert_param(IS_PWR_REGULATOR_UNDERDRIVE(Regulator));
|
||||
assert_param(IS_PWR_STOP_ENTRY(STOPEntry));
|
||||
|
||||
/* Enable Power ctrl clock */
|
||||
__HAL_RCC_PWR_CLK_ENABLE();
|
||||
/* Enable the Under-drive Mode ---------------------------------------------*/
|
||||
/* Clear Under-drive flag */
|
||||
__HAL_PWR_CLEAR_ODRUDR_FLAG();
|
||||
|
||||
/* Enable the Under-drive */
|
||||
__HAL_PWR_UNDERDRIVE_ENABLE();
|
||||
|
||||
/* Get tick */
|
||||
tickstart = HAL_GetTick();
|
||||
|
||||
/* Wait for UnderDrive mode is ready */
|
||||
while(__HAL_PWR_GET_FLAG(PWR_FLAG_UDRDY))
|
||||
{
|
||||
if((HAL_GetTick() - tickstart ) > PWR_UDERDRIVE_TIMEOUT_VALUE)
|
||||
{
|
||||
return HAL_TIMEOUT;
|
||||
}
|
||||
}
|
||||
|
||||
/* Select the regulator state in STOP mode ---------------------------------*/
|
||||
tempreg = PWR->CR1;
|
||||
/* Clear PDDS, LPDS, MRLUDS and LPLUDS bits */
|
||||
tempreg &= (uint32_t)~(PWR_CR1_PDDS | PWR_CR1_LPDS | PWR_CR1_LPUDS | PWR_CR1_MRUDS);
|
||||
|
||||
/* Set LPDS, MRLUDS and LPLUDS bits according to PWR_Regulator value */
|
||||
tempreg |= Regulator;
|
||||
|
||||
/* Store the new value */
|
||||
PWR->CR1 = tempreg;
|
||||
|
||||
/* Set SLEEPDEEP bit of Cortex System Control Register */
|
||||
SCB->SCR |= SCB_SCR_SLEEPDEEP_Msk;
|
||||
|
||||
/* Select STOP mode entry --------------------------------------------------*/
|
||||
if(STOPEntry == PWR_SLEEPENTRY_WFI)
|
||||
{
|
||||
/* Request Wait For Interrupt */
|
||||
__WFI();
|
||||
}
|
||||
else
|
||||
{
|
||||
/* Request Wait For Event */
|
||||
__WFE();
|
||||
}
|
||||
/* Reset SLEEPDEEP bit of Cortex System Control Register */
|
||||
SCB->SCR &= (uint32_t)~((uint32_t)SCB_SCR_SLEEPDEEP_Msk);
|
||||
|
||||
return HAL_OK;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Returns Voltage Scaling Range.
|
||||
* @retval VOS bit field (PWR_REGULATOR_VOLTAGE_SCALE1, PWR_REGULATOR_VOLTAGE_SCALE2 or
|
||||
* PWR_REGULATOR_VOLTAGE_SCALE3)PWR_REGULATOR_VOLTAGE_SCALE1
|
||||
*/
|
||||
uint32_t HAL_PWREx_GetVoltageRange(void)
|
||||
{
|
||||
return (PWR->CR1 & PWR_CR1_VOS);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Configures the main internal regulator output voltage.
|
||||
* @param VoltageScaling specifies the regulator output voltage to achieve
|
||||
* a tradeoff between performance and power consumption.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg PWR_REGULATOR_VOLTAGE_SCALE1: Regulator voltage output range 1 mode,
|
||||
* typical output voltage at 1.4 V,
|
||||
* system frequency up to 216 MHz.
|
||||
* @arg PWR_REGULATOR_VOLTAGE_SCALE2: Regulator voltage output range 2 mode,
|
||||
* typical output voltage at 1.2 V,
|
||||
* system frequency up to 180 MHz.
|
||||
* @arg PWR_REGULATOR_VOLTAGE_SCALE3: Regulator voltage output range 2 mode,
|
||||
* typical output voltage at 1.00 V,
|
||||
* system frequency up to 151 MHz.
|
||||
* @note To update the system clock frequency(SYSCLK):
|
||||
* - Set the HSI or HSE as system clock frequency using the HAL_RCC_ClockConfig().
|
||||
* - Call the HAL_RCC_OscConfig() to configure the PLL.
|
||||
* - Call HAL_PWREx_ConfigVoltageScaling() API to adjust the voltage scale.
|
||||
* - Set the new system clock frequency using the HAL_RCC_ClockConfig().
|
||||
* @note The scale can be modified only when the HSI or HSE clock source is selected
|
||||
* as system clock source, otherwise the API returns HAL_ERROR.
|
||||
* @note When the PLL is OFF, the voltage scale 3 is automatically selected and the VOS bits
|
||||
* value in the PWR_CR1 register are not taken in account.
|
||||
* @note This API forces the PLL state ON to allow the possibility to configure the voltage scale 1 or 2.
|
||||
* @note The new voltage scale is active only when the PLL is ON.
|
||||
* @retval HAL Status
|
||||
*/
|
||||
HAL_StatusTypeDef HAL_PWREx_ControlVoltageScaling(uint32_t VoltageScaling)
|
||||
{
|
||||
uint32_t tickstart = 0;
|
||||
|
||||
assert_param(IS_PWR_REGULATOR_VOLTAGE(VoltageScaling));
|
||||
|
||||
/* Enable Power ctrl clock */
|
||||
__HAL_RCC_PWR_CLK_ENABLE();
|
||||
|
||||
/* Check if the PLL is used as system clock or not */
|
||||
if(__HAL_RCC_GET_SYSCLK_SOURCE() != RCC_CFGR_SWS_PLL)
|
||||
{
|
||||
/* Disable the main PLL */
|
||||
__HAL_RCC_PLL_DISABLE();
|
||||
|
||||
/* Get Start Tick */
|
||||
tickstart = HAL_GetTick();
|
||||
/* Wait till PLL is disabled */
|
||||
while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) != RESET)
|
||||
{
|
||||
if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE)
|
||||
{
|
||||
return HAL_TIMEOUT;
|
||||
}
|
||||
}
|
||||
|
||||
/* Set Range */
|
||||
__HAL_PWR_VOLTAGESCALING_CONFIG(VoltageScaling);
|
||||
|
||||
/* Enable the main PLL */
|
||||
__HAL_RCC_PLL_ENABLE();
|
||||
|
||||
/* Get Start Tick */
|
||||
tickstart = HAL_GetTick();
|
||||
/* Wait till PLL is ready */
|
||||
while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) == RESET)
|
||||
{
|
||||
if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE)
|
||||
{
|
||||
return HAL_TIMEOUT;
|
||||
}
|
||||
}
|
||||
|
||||
/* Get Start Tick */
|
||||
tickstart = HAL_GetTick();
|
||||
while((__HAL_PWR_GET_FLAG(PWR_FLAG_VOSRDY) == RESET))
|
||||
{
|
||||
if((HAL_GetTick() - tickstart ) > PWR_VOSRDY_TIMEOUT_VALUE)
|
||||
{
|
||||
return HAL_TIMEOUT;
|
||||
}
|
||||
}
|
||||
}
|
||||
else
|
||||
{
|
||||
return HAL_ERROR;
|
||||
}
|
||||
return HAL_OK;
|
||||
}
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#endif /* HAL_PWR_MODULE_ENABLED */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
1239
project/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_rcc.c
Normal file
1239
project/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_rcc.c
Normal file
File diff suppressed because it is too large
Load Diff
1773
project/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_rcc_ex.c
Normal file
1773
project/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_rcc_ex.c
Normal file
File diff suppressed because it is too large
Load Diff
1306
project/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_sdram.c
Normal file
1306
project/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_sdram.c
Normal file
File diff suppressed because it is too large
Load Diff
7891
project/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_tim.c
Normal file
7891
project/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_tim.c
Normal file
File diff suppressed because it is too large
Load Diff
2609
project/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_tim_ex.c
Normal file
2609
project/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_tim_ex.c
Normal file
File diff suppressed because it is too large
Load Diff
4014
project/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_uart.c
Normal file
4014
project/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_uart.c
Normal file
File diff suppressed because it is too large
Load Diff
796
project/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_uart_ex.c
Normal file
796
project/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_uart_ex.c
Normal file
@@ -0,0 +1,796 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f7xx_hal_uart_ex.c
|
||||
* @author MCD Application Team
|
||||
* @brief Extended UART HAL module driver.
|
||||
* This file provides firmware functions to manage the following extended
|
||||
* functionalities of the Universal Asynchronous Receiver Transmitter Peripheral (UART).
|
||||
* + Initialization and de-initialization functions
|
||||
* + Peripheral Control functions
|
||||
*
|
||||
*
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
@verbatim
|
||||
==============================================================================
|
||||
##### UART peripheral extended features #####
|
||||
==============================================================================
|
||||
|
||||
(#) Declare a UART_HandleTypeDef handle structure.
|
||||
|
||||
(#) For the UART RS485 Driver Enable mode, initialize the UART registers
|
||||
by calling the HAL_RS485Ex_Init() API.
|
||||
|
||||
@endverbatim
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f7xx_hal.h"
|
||||
|
||||
/** @addtogroup STM32F7xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup UARTEx UARTEx
|
||||
* @brief UART Extended HAL module driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
#ifdef HAL_UART_MODULE_ENABLED
|
||||
|
||||
/* Private typedef -----------------------------------------------------------*/
|
||||
/* Private define ------------------------------------------------------------*/
|
||||
|
||||
/* Private macros ------------------------------------------------------------*/
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
/* Private function prototypes -----------------------------------------------*/
|
||||
/** @defgroup UARTEx_Private_Functions UARTEx Private Functions
|
||||
* @{
|
||||
*/
|
||||
#if defined(USART_CR1_UESM)
|
||||
static void UARTEx_Wakeup_AddressConfig(UART_HandleTypeDef *huart, UART_WakeUpTypeDef WakeUpSelection);
|
||||
#endif /* USART_CR1_UESM */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
|
||||
/** @defgroup UARTEx_Exported_Functions UARTEx Exported Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup UARTEx_Exported_Functions_Group1 Initialization and de-initialization functions
|
||||
* @brief Extended Initialization and Configuration Functions
|
||||
*
|
||||
@verbatim
|
||||
===============================================================================
|
||||
##### Initialization and Configuration functions #####
|
||||
===============================================================================
|
||||
[..]
|
||||
This subsection provides a set of functions allowing to initialize the USARTx or the UARTy
|
||||
in asynchronous mode.
|
||||
(+) For the asynchronous mode the parameters below can be configured:
|
||||
(++) Baud Rate
|
||||
(++) Word Length
|
||||
(++) Stop Bit
|
||||
(++) Parity: If the parity is enabled, then the MSB bit of the data written
|
||||
in the data register is transmitted but is changed by the parity bit.
|
||||
(++) Hardware flow control
|
||||
(++) Receiver/transmitter modes
|
||||
(++) Over Sampling Method
|
||||
(++) One-Bit Sampling Method
|
||||
(+) For the asynchronous mode, the following advanced features can be configured as well:
|
||||
(++) TX and/or RX pin level inversion
|
||||
(++) data logical level inversion
|
||||
(++) RX and TX pins swap
|
||||
(++) RX overrun detection disabling
|
||||
(++) DMA disabling on RX error
|
||||
(++) MSB first on communication line
|
||||
(++) auto Baud rate detection
|
||||
[..]
|
||||
The HAL_RS485Ex_Init() API follows the UART RS485 mode configuration
|
||||
procedures (details for the procedures are available in reference manual).
|
||||
|
||||
@endverbatim
|
||||
|
||||
Depending on the frame length defined by the M1 and M0 bits (7-bit,
|
||||
8-bit or 9-bit), the possible UART formats are listed in the
|
||||
following table.
|
||||
|
||||
Table 1. UART frame format.
|
||||
+-----------------------------------------------------------------------+
|
||||
| M1 bit | M0 bit | PCE bit | UART frame |
|
||||
|---------|---------|-----------|---------------------------------------|
|
||||
| 0 | 0 | 0 | | SB | 8 bit data | STB | |
|
||||
|---------|---------|-----------|---------------------------------------|
|
||||
| 0 | 0 | 1 | | SB | 7 bit data | PB | STB | |
|
||||
|---------|---------|-----------|---------------------------------------|
|
||||
| 0 | 1 | 0 | | SB | 9 bit data | STB | |
|
||||
|---------|---------|-----------|---------------------------------------|
|
||||
| 0 | 1 | 1 | | SB | 8 bit data | PB | STB | |
|
||||
|---------|---------|-----------|---------------------------------------|
|
||||
| 1 | 0 | 0 | | SB | 7 bit data | STB | |
|
||||
|---------|---------|-----------|---------------------------------------|
|
||||
| 1 | 0 | 1 | | SB | 6 bit data | PB | STB | |
|
||||
+-----------------------------------------------------------------------+
|
||||
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Initialize the RS485 Driver enable feature according to the specified
|
||||
* parameters in the UART_InitTypeDef and creates the associated handle.
|
||||
* @param huart UART handle.
|
||||
* @param Polarity Select the driver enable polarity.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg @ref UART_DE_POLARITY_HIGH DE signal is active high
|
||||
* @arg @ref UART_DE_POLARITY_LOW DE signal is active low
|
||||
* @param AssertionTime Driver Enable assertion time:
|
||||
* 5-bit value defining the time between the activation of the DE (Driver Enable)
|
||||
* signal and the beginning of the start bit. It is expressed in sample time
|
||||
* units (1/8 or 1/16 bit time, depending on the oversampling rate)
|
||||
* @param DeassertionTime Driver Enable deassertion time:
|
||||
* 5-bit value defining the time between the end of the last stop bit, in a
|
||||
* transmitted message, and the de-activation of the DE (Driver Enable) signal.
|
||||
* It is expressed in sample time units (1/8 or 1/16 bit time, depending on the
|
||||
* oversampling rate).
|
||||
* @retval HAL status
|
||||
*/
|
||||
HAL_StatusTypeDef HAL_RS485Ex_Init(UART_HandleTypeDef *huart, uint32_t Polarity, uint32_t AssertionTime,
|
||||
uint32_t DeassertionTime)
|
||||
{
|
||||
uint32_t temp;
|
||||
|
||||
/* Check the UART handle allocation */
|
||||
if (huart == NULL)
|
||||
{
|
||||
return HAL_ERROR;
|
||||
}
|
||||
/* Check the Driver Enable UART instance */
|
||||
assert_param(IS_UART_DRIVER_ENABLE_INSTANCE(huart->Instance));
|
||||
|
||||
/* Check the Driver Enable polarity */
|
||||
assert_param(IS_UART_DE_POLARITY(Polarity));
|
||||
|
||||
/* Check the Driver Enable assertion time */
|
||||
assert_param(IS_UART_ASSERTIONTIME(AssertionTime));
|
||||
|
||||
/* Check the Driver Enable deassertion time */
|
||||
assert_param(IS_UART_DEASSERTIONTIME(DeassertionTime));
|
||||
|
||||
if (huart->gState == HAL_UART_STATE_RESET)
|
||||
{
|
||||
/* Allocate lock resource and initialize it */
|
||||
huart->Lock = HAL_UNLOCKED;
|
||||
|
||||
#if (USE_HAL_UART_REGISTER_CALLBACKS == 1)
|
||||
UART_InitCallbacksToDefault(huart);
|
||||
|
||||
if (huart->MspInitCallback == NULL)
|
||||
{
|
||||
huart->MspInitCallback = HAL_UART_MspInit;
|
||||
}
|
||||
|
||||
/* Init the low level hardware */
|
||||
huart->MspInitCallback(huart);
|
||||
#else
|
||||
/* Init the low level hardware : GPIO, CLOCK, CORTEX */
|
||||
HAL_UART_MspInit(huart);
|
||||
#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */
|
||||
}
|
||||
|
||||
huart->gState = HAL_UART_STATE_BUSY;
|
||||
|
||||
/* Disable the Peripheral */
|
||||
__HAL_UART_DISABLE(huart);
|
||||
|
||||
/* Set the UART Communication parameters */
|
||||
if (UART_SetConfig(huart) == HAL_ERROR)
|
||||
{
|
||||
return HAL_ERROR;
|
||||
}
|
||||
|
||||
if (huart->AdvancedInit.AdvFeatureInit != UART_ADVFEATURE_NO_INIT)
|
||||
{
|
||||
UART_AdvFeatureConfig(huart);
|
||||
}
|
||||
|
||||
/* Enable the Driver Enable mode by setting the DEM bit in the CR3 register */
|
||||
SET_BIT(huart->Instance->CR3, USART_CR3_DEM);
|
||||
|
||||
/* Set the Driver Enable polarity */
|
||||
MODIFY_REG(huart->Instance->CR3, USART_CR3_DEP, Polarity);
|
||||
|
||||
/* Set the Driver Enable assertion and deassertion times */
|
||||
temp = (AssertionTime << UART_CR1_DEAT_ADDRESS_LSB_POS);
|
||||
temp |= (DeassertionTime << UART_CR1_DEDT_ADDRESS_LSB_POS);
|
||||
MODIFY_REG(huart->Instance->CR1, (USART_CR1_DEDT | USART_CR1_DEAT), temp);
|
||||
|
||||
/* Enable the Peripheral */
|
||||
__HAL_UART_ENABLE(huart);
|
||||
|
||||
/* TEACK and/or REACK to check before moving huart->gState and huart->RxState to Ready */
|
||||
return (UART_CheckIdleState(huart));
|
||||
}
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
|
||||
/** @defgroup UARTEx_Exported_Functions_Group3 Peripheral Control functions
|
||||
* @brief Extended Peripheral Control functions
|
||||
*
|
||||
@verbatim
|
||||
===============================================================================
|
||||
##### Peripheral Control functions #####
|
||||
===============================================================================
|
||||
[..] This section provides the following functions:
|
||||
(+) HAL_UARTEx_EnableClockStopMode() API enables the UART clock (HSI or LSE only) during stop mode
|
||||
(+) HAL_UARTEx_DisableClockStopMode() API disables the above functionality
|
||||
(+) HAL_MultiProcessorEx_AddressLength_Set() API optionally sets the UART node address
|
||||
detection length to more than 4 bits for multiprocessor address mark wake up.
|
||||
#if defined(USART_CR1_UESM)
|
||||
(+) HAL_UARTEx_StopModeWakeUpSourceConfig() API defines the wake-up from stop mode
|
||||
trigger: address match, Start Bit detection or RXNE bit status.
|
||||
(+) HAL_UARTEx_EnableStopMode() API enables the UART to wake up the MCU from stop mode
|
||||
(+) HAL_UARTEx_DisableStopMode() API disables the above functionality
|
||||
#endif
|
||||
|
||||
[..] This subsection also provides a set of additional functions providing enhanced reception
|
||||
services to user. (For example, these functions allow application to handle use cases
|
||||
where number of data to be received is unknown).
|
||||
|
||||
(#) Compared to standard reception services which only consider number of received
|
||||
data elements as reception completion criteria, these functions also consider additional events
|
||||
as triggers for updating reception status to caller :
|
||||
(+) Detection of inactivity period (RX line has not been active for a given period).
|
||||
(++) RX inactivity detected by IDLE event, i.e. RX line has been in idle state (normally high state)
|
||||
for 1 frame time, after last received byte.
|
||||
(++) RX inactivity detected by RTO, i.e. line has been in idle state
|
||||
for a programmable time, after last received byte.
|
||||
(+) Detection that a specific character has been received.
|
||||
|
||||
(#) There are two mode of transfer:
|
||||
(+) Blocking mode: The reception is performed in polling mode, until either expected number of data is received,
|
||||
or till IDLE event occurs. Reception is handled only during function execution.
|
||||
When function exits, no data reception could occur. HAL status and number of actually received data elements,
|
||||
are returned by function after finishing transfer.
|
||||
(+) Non-Blocking mode: The reception is performed using Interrupts or DMA.
|
||||
These API's return the HAL status.
|
||||
The end of the data processing will be indicated through the
|
||||
dedicated UART IRQ when using Interrupt mode or the DMA IRQ when using DMA mode.
|
||||
The HAL_UARTEx_RxEventCallback() user callback will be executed during Receive process
|
||||
The HAL_UART_ErrorCallback()user callback will be executed when a reception error is detected.
|
||||
|
||||
(#) Blocking mode API:
|
||||
(+) HAL_UARTEx_ReceiveToIdle()
|
||||
|
||||
(#) Non-Blocking mode API with Interrupt:
|
||||
(+) HAL_UARTEx_ReceiveToIdle_IT()
|
||||
|
||||
(#) Non-Blocking mode API with DMA:
|
||||
(+) HAL_UARTEx_ReceiveToIdle_DMA()
|
||||
|
||||
@endverbatim
|
||||
* @{
|
||||
*/
|
||||
|
||||
#if defined(USART_CR3_UCESM)
|
||||
/**
|
||||
* @brief Keep UART Clock enabled when in Stop Mode.
|
||||
* @note When the USART clock source is configured to be LSE or HSI, it is possible to keep enabled
|
||||
* this clock during STOP mode by setting the UCESM bit in USART_CR3 control register.
|
||||
* @note When LPUART is used to wakeup from stop with LSE is selected as LPUART clock source,
|
||||
* and desired baud rate is 9600 baud, the bit UCESM bit in LPUART_CR3 control register must be set.
|
||||
* @param huart UART handle.
|
||||
* @retval HAL status
|
||||
*/
|
||||
HAL_StatusTypeDef HAL_UARTEx_EnableClockStopMode(UART_HandleTypeDef *huart)
|
||||
{
|
||||
/* Process Locked */
|
||||
__HAL_LOCK(huart);
|
||||
|
||||
/* Set UCESM bit */
|
||||
ATOMIC_SET_BIT(huart->Instance->CR3, USART_CR3_UCESM);
|
||||
|
||||
/* Process Unlocked */
|
||||
__HAL_UNLOCK(huart);
|
||||
|
||||
return HAL_OK;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Disable UART Clock when in Stop Mode.
|
||||
* @param huart UART handle.
|
||||
* @retval HAL status
|
||||
*/
|
||||
HAL_StatusTypeDef HAL_UARTEx_DisableClockStopMode(UART_HandleTypeDef *huart)
|
||||
{
|
||||
/* Process Locked */
|
||||
__HAL_LOCK(huart);
|
||||
|
||||
/* Clear UCESM bit */
|
||||
ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_UCESM);
|
||||
|
||||
/* Process Unlocked */
|
||||
__HAL_UNLOCK(huart);
|
||||
|
||||
return HAL_OK;
|
||||
}
|
||||
|
||||
#endif /* USART_CR3_UCESM */
|
||||
/**
|
||||
* @brief By default in multiprocessor mode, when the wake up method is set
|
||||
* to address mark, the UART handles only 4-bit long addresses detection;
|
||||
* this API allows to enable longer addresses detection (6-, 7- or 8-bit
|
||||
* long).
|
||||
* @note Addresses detection lengths are: 6-bit address detection in 7-bit data mode,
|
||||
* 7-bit address detection in 8-bit data mode, 8-bit address detection in 9-bit data mode.
|
||||
* @param huart UART handle.
|
||||
* @param AddressLength This parameter can be one of the following values:
|
||||
* @arg @ref UART_ADDRESS_DETECT_4B 4-bit long address
|
||||
* @arg @ref UART_ADDRESS_DETECT_7B 6-, 7- or 8-bit long address
|
||||
* @retval HAL status
|
||||
*/
|
||||
HAL_StatusTypeDef HAL_MultiProcessorEx_AddressLength_Set(UART_HandleTypeDef *huart, uint32_t AddressLength)
|
||||
{
|
||||
/* Check the UART handle allocation */
|
||||
if (huart == NULL)
|
||||
{
|
||||
return HAL_ERROR;
|
||||
}
|
||||
|
||||
/* Check the address length parameter */
|
||||
assert_param(IS_UART_ADDRESSLENGTH_DETECT(AddressLength));
|
||||
|
||||
huart->gState = HAL_UART_STATE_BUSY;
|
||||
|
||||
/* Disable the Peripheral */
|
||||
__HAL_UART_DISABLE(huart);
|
||||
|
||||
/* Set the address length */
|
||||
MODIFY_REG(huart->Instance->CR2, USART_CR2_ADDM7, AddressLength);
|
||||
|
||||
/* Enable the Peripheral */
|
||||
__HAL_UART_ENABLE(huart);
|
||||
|
||||
/* TEACK and/or REACK to check before moving huart->gState to Ready */
|
||||
return (UART_CheckIdleState(huart));
|
||||
}
|
||||
|
||||
#if defined(USART_CR1_UESM)
|
||||
/**
|
||||
* @brief Set Wakeup from Stop mode interrupt flag selection.
|
||||
* @note It is the application responsibility to enable the interrupt used as
|
||||
* usart_wkup interrupt source before entering low-power mode.
|
||||
* @param huart UART handle.
|
||||
* @param WakeUpSelection Address match, Start Bit detection or RXNE/RXFNE bit status.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg @ref UART_WAKEUP_ON_ADDRESS
|
||||
* @arg @ref UART_WAKEUP_ON_STARTBIT
|
||||
* @arg @ref UART_WAKEUP_ON_READDATA_NONEMPTY
|
||||
* @retval HAL status
|
||||
*/
|
||||
HAL_StatusTypeDef HAL_UARTEx_StopModeWakeUpSourceConfig(UART_HandleTypeDef *huart, UART_WakeUpTypeDef WakeUpSelection)
|
||||
{
|
||||
HAL_StatusTypeDef status = HAL_OK;
|
||||
uint32_t tickstart;
|
||||
|
||||
/* check the wake-up from stop mode UART instance */
|
||||
assert_param(IS_UART_WAKEUP_FROMSTOP_INSTANCE(huart->Instance));
|
||||
/* check the wake-up selection parameter */
|
||||
assert_param(IS_UART_WAKEUP_SELECTION(WakeUpSelection.WakeUpEvent));
|
||||
|
||||
/* Process Locked */
|
||||
__HAL_LOCK(huart);
|
||||
|
||||
huart->gState = HAL_UART_STATE_BUSY;
|
||||
|
||||
/* Disable the Peripheral */
|
||||
__HAL_UART_DISABLE(huart);
|
||||
|
||||
#if defined(USART_CR3_WUS)
|
||||
/* Set the wake-up selection scheme */
|
||||
MODIFY_REG(huart->Instance->CR3, USART_CR3_WUS, WakeUpSelection.WakeUpEvent);
|
||||
#endif /* USART_CR3_WUS */
|
||||
|
||||
if (WakeUpSelection.WakeUpEvent == UART_WAKEUP_ON_ADDRESS)
|
||||
{
|
||||
UARTEx_Wakeup_AddressConfig(huart, WakeUpSelection);
|
||||
}
|
||||
|
||||
/* Enable the Peripheral */
|
||||
__HAL_UART_ENABLE(huart);
|
||||
|
||||
/* Init tickstart for timeout management */
|
||||
tickstart = HAL_GetTick();
|
||||
|
||||
/* Wait until REACK flag is set */
|
||||
if (UART_WaitOnFlagUntilTimeout(huart, USART_ISR_REACK, RESET, tickstart, HAL_UART_TIMEOUT_VALUE) != HAL_OK)
|
||||
{
|
||||
status = HAL_TIMEOUT;
|
||||
}
|
||||
else
|
||||
{
|
||||
/* Initialize the UART State */
|
||||
huart->gState = HAL_UART_STATE_READY;
|
||||
}
|
||||
|
||||
/* Process Unlocked */
|
||||
__HAL_UNLOCK(huart);
|
||||
|
||||
return status;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Enable UART Stop Mode.
|
||||
* @note The UART is able to wake up the MCU from Stop 1 mode as long as UART clock is HSI or LSE.
|
||||
* @param huart UART handle.
|
||||
* @retval HAL status
|
||||
*/
|
||||
HAL_StatusTypeDef HAL_UARTEx_EnableStopMode(UART_HandleTypeDef *huart)
|
||||
{
|
||||
/* Process Locked */
|
||||
__HAL_LOCK(huart);
|
||||
|
||||
/* Set UESM bit */
|
||||
ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_UESM);
|
||||
|
||||
/* Process Unlocked */
|
||||
__HAL_UNLOCK(huart);
|
||||
|
||||
return HAL_OK;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Disable UART Stop Mode.
|
||||
* @param huart UART handle.
|
||||
* @retval HAL status
|
||||
*/
|
||||
HAL_StatusTypeDef HAL_UARTEx_DisableStopMode(UART_HandleTypeDef *huart)
|
||||
{
|
||||
/* Process Locked */
|
||||
__HAL_LOCK(huart);
|
||||
|
||||
/* Clear UESM bit */
|
||||
ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_UESM);
|
||||
|
||||
/* Process Unlocked */
|
||||
__HAL_UNLOCK(huart);
|
||||
|
||||
return HAL_OK;
|
||||
}
|
||||
|
||||
#endif /* USART_CR1_UESM */
|
||||
/**
|
||||
* @brief Receive an amount of data in blocking mode till either the expected number of data
|
||||
* is received or an IDLE event occurs.
|
||||
* @note HAL_OK is returned if reception is completed (expected number of data has been received)
|
||||
* or if reception is stopped after IDLE event (less than the expected number of data has been received)
|
||||
* In this case, RxLen output parameter indicates number of data available in reception buffer.
|
||||
* @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01),
|
||||
* the received data is handled as a set of uint16_t. In this case, Size must indicate the number
|
||||
* of uint16_t available through pData.
|
||||
* @param huart UART handle.
|
||||
* @param pData Pointer to data buffer (uint8_t or uint16_t data elements).
|
||||
* @param Size Amount of data elements (uint8_t or uint16_t) to be received.
|
||||
* @param RxLen Number of data elements finally received
|
||||
* (could be lower than Size, in case reception ends on IDLE event)
|
||||
* @param Timeout Timeout duration expressed in ms (covers the whole reception sequence).
|
||||
* @retval HAL status
|
||||
*/
|
||||
HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint16_t *RxLen,
|
||||
uint32_t Timeout)
|
||||
{
|
||||
uint8_t *pdata8bits;
|
||||
uint16_t *pdata16bits;
|
||||
uint16_t uhMask;
|
||||
uint32_t tickstart;
|
||||
|
||||
/* Check that a Rx process is not already ongoing */
|
||||
if (huart->RxState == HAL_UART_STATE_READY)
|
||||
{
|
||||
if ((pData == NULL) || (Size == 0U))
|
||||
{
|
||||
return HAL_ERROR;
|
||||
}
|
||||
|
||||
huart->ErrorCode = HAL_UART_ERROR_NONE;
|
||||
huart->RxState = HAL_UART_STATE_BUSY_RX;
|
||||
huart->ReceptionType = HAL_UART_RECEPTION_TOIDLE;
|
||||
huart->RxEventType = HAL_UART_RXEVENT_TC;
|
||||
|
||||
/* Init tickstart for timeout management */
|
||||
tickstart = HAL_GetTick();
|
||||
|
||||
huart->RxXferSize = Size;
|
||||
huart->RxXferCount = Size;
|
||||
|
||||
/* Computation of UART mask to apply to RDR register */
|
||||
UART_MASK_COMPUTATION(huart);
|
||||
uhMask = huart->Mask;
|
||||
|
||||
/* In case of 9bits/No Parity transfer, pRxData needs to be handled as a uint16_t pointer */
|
||||
if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE))
|
||||
{
|
||||
pdata8bits = NULL;
|
||||
pdata16bits = (uint16_t *) pData;
|
||||
}
|
||||
else
|
||||
{
|
||||
pdata8bits = pData;
|
||||
pdata16bits = NULL;
|
||||
}
|
||||
|
||||
/* Initialize output number of received elements */
|
||||
*RxLen = 0U;
|
||||
|
||||
/* as long as data have to be received */
|
||||
while (huart->RxXferCount > 0U)
|
||||
{
|
||||
/* Check if IDLE flag is set */
|
||||
if (__HAL_UART_GET_FLAG(huart, UART_FLAG_IDLE))
|
||||
{
|
||||
/* Clear IDLE flag in ISR */
|
||||
__HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_IDLEF);
|
||||
|
||||
/* If Set, but no data ever received, clear flag without exiting loop */
|
||||
/* If Set, and data has already been received, this means Idle Event is valid : End reception */
|
||||
if (*RxLen > 0U)
|
||||
{
|
||||
huart->RxEventType = HAL_UART_RXEVENT_IDLE;
|
||||
huart->RxState = HAL_UART_STATE_READY;
|
||||
|
||||
return HAL_OK;
|
||||
}
|
||||
}
|
||||
|
||||
/* Check if RXNE flag is set */
|
||||
if (__HAL_UART_GET_FLAG(huart, UART_FLAG_RXNE))
|
||||
{
|
||||
if (pdata8bits == NULL)
|
||||
{
|
||||
*pdata16bits = (uint16_t)(huart->Instance->RDR & uhMask);
|
||||
pdata16bits++;
|
||||
}
|
||||
else
|
||||
{
|
||||
*pdata8bits = (uint8_t)(huart->Instance->RDR & (uint8_t)uhMask);
|
||||
pdata8bits++;
|
||||
}
|
||||
/* Increment number of received elements */
|
||||
*RxLen += 1U;
|
||||
huart->RxXferCount--;
|
||||
}
|
||||
|
||||
/* Check for the Timeout */
|
||||
if (Timeout != HAL_MAX_DELAY)
|
||||
{
|
||||
if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U))
|
||||
{
|
||||
huart->RxState = HAL_UART_STATE_READY;
|
||||
|
||||
return HAL_TIMEOUT;
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
/* Set number of received elements in output parameter : RxLen */
|
||||
*RxLen = huart->RxXferSize - huart->RxXferCount;
|
||||
/* At end of Rx process, restore huart->RxState to Ready */
|
||||
huart->RxState = HAL_UART_STATE_READY;
|
||||
|
||||
return HAL_OK;
|
||||
}
|
||||
else
|
||||
{
|
||||
return HAL_BUSY;
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Receive an amount of data in interrupt mode till either the expected number of data
|
||||
* is received or an IDLE event occurs.
|
||||
* @note Reception is initiated by this function call. Further progress of reception is achieved thanks
|
||||
* to UART interrupts raised by RXNE and IDLE events. Callback is called at end of reception indicating
|
||||
* number of received data elements.
|
||||
* @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01),
|
||||
* the received data is handled as a set of uint16_t. In this case, Size must indicate the number
|
||||
* of uint16_t available through pData.
|
||||
* @param huart UART handle.
|
||||
* @param pData Pointer to data buffer (uint8_t or uint16_t data elements).
|
||||
* @param Size Amount of data elements (uint8_t or uint16_t) to be received.
|
||||
* @retval HAL status
|
||||
*/
|
||||
HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size)
|
||||
{
|
||||
HAL_StatusTypeDef status;
|
||||
|
||||
/* Check that a Rx process is not already ongoing */
|
||||
if (huart->RxState == HAL_UART_STATE_READY)
|
||||
{
|
||||
if ((pData == NULL) || (Size == 0U))
|
||||
{
|
||||
return HAL_ERROR;
|
||||
}
|
||||
|
||||
/* Set Reception type to reception till IDLE Event*/
|
||||
huart->ReceptionType = HAL_UART_RECEPTION_TOIDLE;
|
||||
huart->RxEventType = HAL_UART_RXEVENT_TC;
|
||||
|
||||
status = UART_Start_Receive_IT(huart, pData, Size);
|
||||
|
||||
/* Check Rx process has been successfully started */
|
||||
if (status == HAL_OK)
|
||||
{
|
||||
if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE)
|
||||
{
|
||||
__HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_IDLEF);
|
||||
ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_IDLEIE);
|
||||
}
|
||||
else
|
||||
{
|
||||
/* In case of errors already pending when reception is started,
|
||||
Interrupts may have already been raised and lead to reception abortion.
|
||||
(Overrun error for instance).
|
||||
In such case Reception Type has been reset to HAL_UART_RECEPTION_STANDARD. */
|
||||
status = HAL_ERROR;
|
||||
}
|
||||
}
|
||||
|
||||
return status;
|
||||
}
|
||||
else
|
||||
{
|
||||
return HAL_BUSY;
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Receive an amount of data in DMA mode till either the expected number
|
||||
* of data is received or an IDLE event occurs.
|
||||
* @note Reception is initiated by this function call. Further progress of reception is achieved thanks
|
||||
* to DMA services, transferring automatically received data elements in user reception buffer and
|
||||
* calling registered callbacks at half/end of reception. UART IDLE events are also used to consider
|
||||
* reception phase as ended. In all cases, callback execution will indicate number of received data elements.
|
||||
* @note When the UART parity is enabled (PCE = 1), the received data contain
|
||||
* the parity bit (MSB position).
|
||||
* @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01),
|
||||
* the received data is handled as a set of uint16_t. In this case, Size must indicate the number
|
||||
* of uint16_t available through pData.
|
||||
* @param huart UART handle.
|
||||
* @param pData Pointer to data buffer (uint8_t or uint16_t data elements).
|
||||
* @param Size Amount of data elements (uint8_t or uint16_t) to be received.
|
||||
* @retval HAL status
|
||||
*/
|
||||
HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size)
|
||||
{
|
||||
HAL_StatusTypeDef status;
|
||||
|
||||
/* Check that a Rx process is not already ongoing */
|
||||
if (huart->RxState == HAL_UART_STATE_READY)
|
||||
{
|
||||
if ((pData == NULL) || (Size == 0U))
|
||||
{
|
||||
return HAL_ERROR;
|
||||
}
|
||||
|
||||
/* Set Reception type to reception till IDLE Event*/
|
||||
huart->ReceptionType = HAL_UART_RECEPTION_TOIDLE;
|
||||
huart->RxEventType = HAL_UART_RXEVENT_TC;
|
||||
|
||||
status = UART_Start_Receive_DMA(huart, pData, Size);
|
||||
|
||||
/* Check Rx process has been successfully started */
|
||||
if (status == HAL_OK)
|
||||
{
|
||||
if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE)
|
||||
{
|
||||
__HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_IDLEF);
|
||||
ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_IDLEIE);
|
||||
}
|
||||
else
|
||||
{
|
||||
/* In case of errors already pending when reception is started,
|
||||
Interrupts may have already been raised and lead to reception abortion.
|
||||
(Overrun error for instance).
|
||||
In such case Reception Type has been reset to HAL_UART_RECEPTION_STANDARD. */
|
||||
status = HAL_ERROR;
|
||||
}
|
||||
}
|
||||
|
||||
return status;
|
||||
}
|
||||
else
|
||||
{
|
||||
return HAL_BUSY;
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Provide Rx Event type that has lead to RxEvent callback execution.
|
||||
* @note When HAL_UARTEx_ReceiveToIdle_IT() or HAL_UARTEx_ReceiveToIdle_DMA() API are called, progress
|
||||
* of reception process is provided to application through calls of Rx Event callback (either default one
|
||||
* HAL_UARTEx_RxEventCallback() or user registered one). As several types of events could occur (IDLE event,
|
||||
* Half Transfer, or Transfer Complete), this function allows to retrieve the Rx Event type that has lead
|
||||
* to Rx Event callback execution.
|
||||
* @note This function is expected to be called within the user implementation of Rx Event Callback,
|
||||
* in order to provide the accurate value :
|
||||
* In Interrupt Mode :
|
||||
* - HAL_UART_RXEVENT_TC : when Reception has been completed (expected nb of data has been received)
|
||||
* - HAL_UART_RXEVENT_IDLE : when Idle event occurred prior reception has been completed (nb of
|
||||
* received data is lower than expected one)
|
||||
* In DMA Mode :
|
||||
* - HAL_UART_RXEVENT_TC : when Reception has been completed (expected nb of data has been received)
|
||||
* - HAL_UART_RXEVENT_HT : when half of expected nb of data has been received
|
||||
* - HAL_UART_RXEVENT_IDLE : when Idle event occurred prior reception has been completed (nb of
|
||||
* received data is lower than expected one).
|
||||
* In DMA mode, RxEvent callback could be called several times;
|
||||
* When DMA is configured in Normal Mode, HT event does not stop Reception process;
|
||||
* When DMA is configured in Circular Mode, HT, TC or IDLE events don't stop Reception process;
|
||||
* @param huart UART handle.
|
||||
* @retval Rx Event Type (return vale will be a value of @ref UART_RxEvent_Type_Values)
|
||||
*/
|
||||
HAL_UART_RxEventTypeTypeDef HAL_UARTEx_GetRxEventType(UART_HandleTypeDef *huart)
|
||||
{
|
||||
/* Return Rx Event type value, as stored in UART handle */
|
||||
return(huart->RxEventType);
|
||||
}
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup UARTEx_Private_Functions
|
||||
* @{
|
||||
*/
|
||||
#if defined(USART_CR1_UESM)
|
||||
|
||||
/**
|
||||
* @brief Initialize the UART wake-up from stop mode parameters when triggered by address detection.
|
||||
* @param huart UART handle.
|
||||
* @param WakeUpSelection UART wake up from stop mode parameters.
|
||||
* @retval None
|
||||
*/
|
||||
static void UARTEx_Wakeup_AddressConfig(UART_HandleTypeDef *huart, UART_WakeUpTypeDef WakeUpSelection)
|
||||
{
|
||||
assert_param(IS_UART_ADDRESSLENGTH_DETECT(WakeUpSelection.AddressLength));
|
||||
|
||||
/* Set the USART address length */
|
||||
MODIFY_REG(huart->Instance->CR2, USART_CR2_ADDM7, WakeUpSelection.AddressLength);
|
||||
|
||||
/* Set the USART address node */
|
||||
MODIFY_REG(huart->Instance->CR2, USART_CR2_ADD, ((uint32_t)WakeUpSelection.Address << UART_CR2_ADDRESS_LSB_POS));
|
||||
}
|
||||
#endif /* USART_CR1_UESM */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#endif /* HAL_UART_MODULE_ENABLED */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
1091
project/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_fmc.c
Normal file
1091
project/Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_fmc.c
Normal file
File diff suppressed because it is too large
Load Diff
Reference in New Issue
Block a user